Linksys Wireless Router :: Wrt54gs2 V7 Not Working Wirelessly - No Orange Light?
Jun 3, 2012
So I have been having internet problems lately and first thought it was my modem. Figured out it wasn't the modem but the isp.After I woke up the next morning I found the wireless not to we working again but the hard connection to be just fine. I have tried resetting the router but I'm not entirely sure I went through. The orange light no longer comes on. Wired connection also doesn't work while connected to the router. I have tried 192.168.1.1 and nothing loads. The router and modem are about 5 or 6 years old. A windows xp desktop, windows 7 and vista laptops are on the network with a blue ray player.the router is a wrt54gs2 v7
I think i have to reconfigure the router but I'm not sure. If that's the case why am i having trouble with 192.168.1.1?
View 3 Replies
ADVERTISEMENT
Mar 8, 2012
My router randomly stopped working after I bumped into the wire. It still shows up as a network you can connect to, but whenever I try to connect, it keeps saying there is a problem with my connection. I tried using a different internet cord, but nothing changes. I even tried to reinstall my router and still no dice.
View 6 Replies
View Related
Aug 2, 2012
I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit).I have been using this router for 3 months. I was able to use the internet on both devices simultaneously until now. But suddenly since yesterday it only works for one device at a time, not both.
If I connect to the router then I can access the internet only from the laptop. To use the internet from the PC, I have to power off the router, type in run "netsh int ip reset resetlog.txt", and restart the PC. But as the router is off, the internet is inaccessible on the laptop.
While router is on, the PC shows limited or no connectivity.
I tried reseting the router 2-3 times.
On the laptop it sometimes shows "IP address conflict has been detected", even though the IP addresses of the devices were not the same. The IP address of the PC shows 169.X.X.X (when the router is on), whereas the ISP's IP addresses start with 124.X.X.X.
View 1 Replies
View Related
Feb 22, 2011
I switch to a new internet provider. which is wireless[Frontier]. my printer is dell V715w the orange light is flashing. provide detailed info to correct
View 1 Replies
View Related
Feb 12, 2012
Belkin wireless n300 router has an orange light. All of the cables are plugged in and have tried ipconfig?
View 1 Replies
View Related
May 7, 2012
I have a question, I have an ap (cisco 1130) that began to get the status light flashing orange and light Ethernet and radio are off.I did a factory reset and it was ok ... past 3 days the problem has happened again.I changed the ap with a new but the situation remained.I tested the wiring and everything is ok.the switch port is set up correctly.
View 11 Replies
View Related
Jun 19, 2012
My Linksys X2000 still working but only red power light on (at nomal there are 3 white light on).
View 3 Replies
View Related
Sep 9, 2011
I have WRT 120 N which has apparently stopped working. When I turn it on, only the power led turns on without blinking, no other light flashes. My computer can't detect the router signals since the signal light is off. Neither does my modem show that the router is connected to it through the ethernet cable. My ethernet cable is working fine, since it is working directly with the computer.
View 6 Replies
View Related
Mar 11, 2012
I reseted my router because I couldn't go in the login so now eveything is green except the earth looking thing next.the power it is orange Cause I really need my internet
View 1 Replies
View Related
Jul 24, 2012
my family kept having a problem with our Billion 6800n router. (or something like that).Basically we pinned the problem down to it not having the strength to keep several connections running through it. So we upgraded to a Billion 7800n and found it is much more stable and much faster.However it has been having a similar problem to our previous router.
Occasionally the internet light drops from green to orange, and we can't load any more pages until it has gone back to green.Here is a picture of what it looks like when in that status.But the weird thing is the connection bars on the windows toolbar at the bottom of the screen still show full strength.As shown here.Now I thought it might be because it was sharing a power board with other connections going through it,so I transferred it to a smaller two-plug one instead.
View 2 Replies
View Related
Feb 21, 2012
Network port: Yellow light blinking and orange light not showing
View 1 Replies
View Related
Oct 11, 2012
My N600 router has a flashing orange light on it. What's going on with this thing?
View 4 Replies
View Related
Apr 12, 2013
I was given the above router but I need set up software?
View 1 Replies
View Related
Aug 29, 2012
Plugging in laptop to ethernet 1, no IP obtained. ethernet 2, 3 and 4 give me an IP (192.168.1.100) but I can't ping the linkys. Holding the reset button has not done anything. I can connect and manage the Linksys wirelessly. I've tried re-flashing firmware and resetting factory defaults. Ethernet 1 LED is always on connected or not. The other three light when connected.
View 4 Replies
View Related
Mar 26, 2012
I'm trying to take off the strict nat restriction.
View 1 Replies
View Related
Jul 9, 2011
I just moved in with my friend and i'm having trouble connecting to wireless router linksys WRT54GS2 V1. My roommate can connect his laptop and desktop to the router wirelessly, but my iphone and laptop can't connect. I've tried both of my devices on a wireless network at a friend's house, and both worked fine. We even changed AND removed the password and it doesn't let me log on the internet.
View 5 Replies
View Related
Jul 22, 2011
I previously asked if I should be concerned that the Internet light on my Linksys E3000 router doesn't light up when I have Internet access. Well recently I had to do a reset and I noticed that during the reset it does in fact light up, but it doesn't come on when the router is done with the reset!
View 1 Replies
View Related
May 22, 2013
Belkin n wireless router model number F5D8236 v1! my modem is showing an internet connection but my router "modem" light is flashing orange and my internet light doesn't even come on. we are not sure but we believe this became a problem last night after my daughter connected her new lap top to the wireless connection.
View 1 Replies
View Related
Nov 30, 2011
I've just recently started to get this error, and I'm not sure why (I have no expierence with routers whatsoever). I have noticed, that whenever this happens though, that my NAT type for my xbox goes strict.
View 4 Replies
View Related
Mar 26, 2013
how to change the password for my wifi.
View 1 Replies
View Related
Mar 23, 2012
I have a Linksys model WRT54GS2 with 4 ports, with Ethernet cables connected to ports 1 and 2. I have a laptop connected by wireless connection, with only an Xbox connected using Port 1 and occasionally port 2. Just recently, port 1 shows no activity. When connected to Xbox it doesn't display a check mark showing connection but does with port 2. I've connected it to port 3 and 4, which shows a check mark but won't connect to Xbox live. It's like port 2 only works, what I can do to "fix" ports 1, 3, and 4?
View 1 Replies
View Related
Sep 1, 2011
I've been having trouble with my wrt54gs2 and 4 360's. I tried a link someone posted for me to a cisco tutorial, it worked, but only for one 360. I have a Netgear wndr3400, I HATE the wireless on that router. Its unreliable but I like the features, the guest network and transfer meter, plus its worked with 4 360's out of the box. So would it be possible to turn off my wifi on the Netgear and plug the wrt54gs2 in and use its wireless?
View 7 Replies
View Related
Mar 23, 2013
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12
My router is not working wireless. Just stopped working. I hadn't touched anything in the settings. Nothing is picking up it's signal. All the lights are on saying that it SHOULD be working!I checked all the settings and they were as before. I have unplugged it and restarted, I have reset to factory settings and set it back up again but nothing! Works fine on the wire.
View 4 Replies
View Related
Mar 25, 2012
I have a Dlink dir-600 router I flashed it with dd-wrt it was was working good but I started experiencing some problems so I decided to flash it with the stock firmware and I did so later on after a week the Ethernet ports on the router stopped working I thought the router was bricked but I was able to connect wirelessly and could access the Internet and I was even able to change the settings of the router by going to 192.168.0.1 all was fine but all the ethernet ports stopped working so I thought it was the problem of the stock frimware and I again flashed it with dd-wrt but still all the Ethernet ports won't work I can only connect the computers wirelessly.
View 9 Replies
View Related
Oct 6, 2011
After a recent lighting strick close by I can not connect to the internet through my router. Stright from the modem works fine. The port light on the router does not come on. I rebooted modem, router and computer with no luck. It's like I've lost my network adapters and I don't know how to get them back. I tryed another E2000 and it's the same way.
View 1 Replies
View Related
Dec 4, 2012
Just bought the linksys E2500 as an upgrade for a my Trendnet 150 wireless N router. I have a motorolla surfboard modem with time warner roadrunner cable internet. After connecting the router I have no internet connection. I do not get a light on the WAN connection after the ethernet cable is attached. I know the light works because when I power it on all the lights come on. I cloned the MAC address but this did not work. I have searched the forums for hours and tried different ideas to no avail. My PC recognized the router and I'm able to get to all the settings but cannot establish a connection from the router to the modem. I also tried different ethernet cables to eliminate that possiblilty.
View 4 Replies
View Related
Jun 25, 2011
The Internet LED does not light up when I have access to the Internet like now. I think I remember this lighting up in the past and find it strange that an LED light would burn out so early
View 5 Replies
View Related
Jun 22, 2012
Reset button pushed in, unplugged won't reset it. I get my default name on connections but it's not showing as available connection.
View 7 Replies
View Related
Jan 24, 2009
Ive recently tried to update the firmware and everything went as instructed, then the power and LAN light went out. Now I have the indicator lights for the computer and modem, but thats is. No internet or SSID broadcast. I cannot log into or ping the unit, and have tried the hard reset many times, with no effect.
View 8 Replies
View Related
Dec 5, 2011
I just purchased the E4200 (hardware version 1).Great router with amazing features.I plugged my WD Elements 2TB, setup my media and FTP server and everything is working fine.
My only concern is about the HD light that is always on, even when nobody is accessing it. I turned off the Auto-scan option but the HD seems to be always reading something...
When this HD was plugged on my computer the light was on during access only.Is it OK? I mean, isn't something that will decrease the HD lifespam? Is there a way to tell the E4200 to not access the HD when nobody is using it?
View 2 Replies
View Related
Oct 29, 2011
the power light on my wrt54g v2.2 router keeps blinking and it wont connect to the internet when connected
View 3 Replies
View Related
Jan 6, 2013
I am having a problem with my ea4500 several times a day the cisco light flashes and I loose internet connectivity. I have tried resetting the router by the reset button and changed ssid name, making two different one for each band, and still I am having a problem. I have read where it could be a firmware update, I have updated (using current version)
View 6 Replies
View Related
Jul 4, 2006
My Wireless-G WRT54G router has a blinking power light and the startup software says "Unable to connect to the Router! Check that the Router has been connected to the computer, and that your Ethernet adapter is working." I tried uploading the firmware but I can't get to the router page to update. Is there a known problem or solution here or am I just going to have to find the router page?
View 9 Replies
View Related
