Dlink Dir-600 Router Working Wirelessly But Not Wired?
Mar 25, 2012
I have a Dlink dir-600 router I flashed it with dd-wrt it was was working good but I started experiencing some problems so I decided to flash it with the stock firmware and I did so later on after a week the Ethernet ports on the router stopped working I thought the router was bricked but I was able to connect wirelessly and could access the Internet and I was even able to change the settings of the router by going to 192.168.0.1 all was fine but all the ethernet ports stopped working so I thought it was the problem of the stock frimware and I again flashed it with dd-wrt but still all the Ethernet ports won't work I can only connect the computers wirelessly.
View 9 Replies
ADVERTISEMENT
Jan 24, 2013
I want to connect the Wireless D-link Router to Wireless D-link Router Wirelessly...How to connect it?
View 1 Replies
View Related
Jan 16, 2011
I am trying to extend my broadband signal out from the house to a rumpus room.My current setup does not give a signal that far.. or at least it is poor with 1 mbps speed.To cable anything other than my moden to router A is not an option. Router A to Router B and then on to the computers needs to be wireless,My modem is currently connected to router A (Dlink dl624) but how do I get router B (dlink dir635) to talk to router A and then relay my broadbad to my computer out in the rumpus room and also inside the house when I am there.
View 2 Replies
View Related
Feb 13, 2011
I have 2 routers and hate wires! The main router connected to the internet is the Linksys WRT 160N which runs the bulk of the wireless devices in my house. I just got bought a new computer which is in a different room and do not want to run a 100' wire to reach the area... I have a extra router kicking around the Dlink WBR-1310 and I want to connect the two routers in two different rooms, wireless.
View 2 Replies
View Related
Sep 16, 2011
I have a home network that uses a DLINK DIR-655 router. All of my devices ( a mix of wireless and wired) except one--a windows xp SP 3 desktop that stopped working yesterday. Some viruses, and adware were detected and it has not worked since then. What I have done.
View 11 Replies
View Related
Jan 10, 2011
dlink adsl-2460t which is really torturing. I ahve connnected my cable net modem to my router but unfortunately its of no use cos i cant connect my laptop to it. Although it shows the availablity of the connection but it doesn't get through to net..it keeps on giving a caution sign on the bottom right corner, above the signal strength...
View 1 Replies
View Related
Oct 22, 2011
I have purchased a Dlink DWR 131 today. I did configure it as per the instructions. Initially my iPhone was able to detect the wireless network. Then I switched off the device and turned it on later and it stopped working. It is not damaged for sure, since http://192.168.0.1/ is still accessible from my laptop and I am able to connect to internet through LAN cable. But the wireless network is not working. Even my laptop doesn't detect the network neither does my iPhone. I suspect this to be some configuration issue. I have tried using different SSIDs. Also, MAC filter is disabled. I also tried using different wireless channels. I even did reset the router but no luck.
View 2 Replies
View Related
Mar 28, 2012
I'm running XP and have Bell-Aliant modem SIEMENS Gigaset SE567 running to DI-624 router. It has been working for years but after the internet was down in the area for most of the day, it has failed to reset. I've done the usual un-plug/wait/replug routine a few times but cannot connect. I can connect directly through the SIEMENS but when I introduce the DI-624 back into the mix, I'm not able to connect to the internet. How do I make it happen. I'm not tech savvy so go slow.
View 1 Replies
View Related
Sep 29, 2011
My dlink dir 628 wireless router suddenly stopped working yesterday. If I plug the ethernet cable directly into my computer and the internet works. I see the wireless profile in the options for the wireless internet, but when I try to connect, it is unable to do so.
I've tried resetting the router (using the button on the device) witand reinstalling the router (using the CD), but still not working. Also have tried turning off the modem, router, and restarting my computer.
View 4 Replies
View Related
Mar 23, 2013
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12
My router is not working wireless. Just stopped working. I hadn't touched anything in the settings. Nothing is picking up it's signal. All the lights are on saying that it SHOULD be working!I checked all the settings and they were as before. I have unplugged it and restarted, I have reset to factory settings and set it back up again but nothing! Works fine on the wire.
View 4 Replies
View Related
Jun 3, 2012
So I have been having internet problems lately and first thought it was my modem. Figured out it wasn't the modem but the isp.After I woke up the next morning I found the wireless not to we working again but the hard connection to be just fine. I have tried resetting the router but I'm not entirely sure I went through. The orange light no longer comes on. Wired connection also doesn't work while connected to the router. I have tried 192.168.1.1 and nothing loads. The router and modem are about 5 or 6 years old. A windows xp desktop, windows 7 and vista laptops are on the network with a blue ray player.the router is a wrt54gs2 v7
I think i have to reconfigure the router but I'm not sure. If that's the case why am i having trouble with 192.168.1.1?
View 3 Replies
View Related
Oct 31, 2011
I'm currently using an orange livebox which has been pretty reliable in the past. My set up is livebox > homeplug > homeplug > linksys wireless router > into 2 pcs.Its odd because my pcs have trouble detecting the wireless router, however my laptop can link up no problems.I have plugged my laptop directly into the livebox via ethernet and it works fine so I can rule out the livebox. I've also swapped the cables and they all work ok.Basically, it does link up intermittently and runs perfectly, but then after a day, or even 10 minutes it disconnects and I have a nightmare getting it to work again. I went through the entire cable system and got right to the end and hey presto it all worked...so I plugged my pcs back in. Then after about 10 mins it lost the network connection and I couldnt even link up to the livebox router by keying in 192.168.1.1. The laptop CAN connect wirelessy and access the config pages.
View 2 Replies
View Related
Jan 12, 2011
why does my wired computer connect wirelessly instead?? .
View 8 Replies
View Related
Sep 17, 2012
I'm using the Dlink DIR-615 Router. It's fairly old, and has been giving me trouble for a while. Due to recent circumstances I have no choice but to use this router. I can connect to the router just fine but it does not connect to the internet whether it be a wired or wireless connection. I have recently reset the router and haven't changed any settings besides the password. (also I get the error "Your computer appears to be correctly configured, but the device or resource (Microsoft Corporation: Software, Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads) is not responding" from window when trying to repair the connection.)
ipconfig/all:
C:windowssystem32>ipconfig/all
Windows IP Configuration
[Code].....
View 4 Replies
View Related
Feb 11, 2011
My friend's wireless internet just suddenly failed last night. She was watching Youtube videos, but had to do something, so she closed the window. When she came back, she couldn't connect, and was given an error, something about user connectivity.Her wired connection is still working.
View 5 Replies
View Related
Sep 21, 2011
I have a wireless G router and all of my devices that connect to it right now all have wireless adapters. I have several devices in a media closet (about 3 or 4 - Blu ray, DVR, ect) that only have wired ports. Since all these devices are right next to each other, I don't need to buy a wireless adapter for each one because that's just pointless. is there a way to have all 4 of these wired devices connect to a central device, which in turn this device connects to my wireless network? I know there is a way I just haven't been able to figure it out.And then, with this new device, is there some special way it has to be configured?
View 1 Replies
View Related
Feb 23, 2013
I have 2 mbps line with D-link modem shared by 2 persons through wire. Sometime I feel that my client is using more band width than me so I want to know is there is any way I can control the speed of my client.
View 1 Replies
View Related
Jan 10, 2012
My Laptop IP 192.168.0.198 cannot see shares with desktop 192.168.0.199. Both PC's are win 7 with firewalls turned off. However the desktop can see shares on laptop. All computers are part of WORKGROUP. When wireless i can ping desktop.When i plug Ethernet cable to laptop 192.168.0.196 I can access desktop files.Also weird thing i have turned off password protection sharing but still asked for password (can live with that though)
View 1 Replies
View Related
Mar 3, 2012
My buddy just purchased a Sharp AR-M450 multifunction printer for his small business and it has the optional network card. He wants to take advantage of the network printing capabilities but we want to avoid having to run an ethernet cable from the printer to the wireless router. The entire network is wireless because running cables would be a huge pain in the building he is in. What could we use to connect the printer to the network without running cables?
View 1 Replies
View Related
Mar 29, 2013
Region : Indonesia
Model : TD-W8151N
Hardware Version : V3
Firmware Version :
ISP :
Recently I bought TD-W8151N wireless adsl router, I have one desktop computer that connected to TD-W8151N via ethernet and wirelessly to one laptop, IP Addr: 192.168.1.4, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : desktop (LAN connection IP Addr: 192.168.1.3, Subnet 255.255.255.0 and Gateway: 192.168.1.1 : laptop (wireless connection) but I can't ping each other and also can't access the share folders between them., both computers can access internet. Is there anything I missed the configuration setting of the router? Before I use wireless, I connected this 2 computers using cross-type utp cable, and working good.
View 5 Replies
View Related
Jan 11, 2011
we have two desktop Pc's both hard wired to a Linksys router. One P.C is on Windows 7 system the other is on Vista. The windows 7 is connecting O.K. The one on Vista is showing " Does not have a wireless network adaptor, install & configure. The Vista P.C. was working O.K. a couple of days ago.Also not connecting to a laptop from the host computer on the Vista system?
View 2 Replies
View Related
Feb 3, 2011
I have a Century Link DSL connection in my house and its working fine. I just got a new Linksys BEFSR41 v.3. I am trying to set it up for my PC, Xbox360 and BD player. Everything works fine when I plug them in to the DSL modem 1 by 1 but when I try to put the Linksys "in the middle"... nothing... So I'm pretty sure its not my DSL modem or connection.All the lights come up on the Linksys as they should (power, internet and the Ethernet) but for some reason it seems the internet not getting trought the router. When its connected and I pull up my internet browser I type 192.168.1.1 and it takes me to the linksys config site. Without the router in the same address go to the Westell site as thats my DSL modem. Everything looks fine on the config site. All the correct IP, MAC, DNS address are there and still no internet access on any of my device.
View 1 Replies
View Related
Dec 12, 2006
I just buy the BEFSR81,still not working.
View 3 Replies
View Related
Jan 1, 2013
Every time i plug in my d-link DWA-125 usb wireless adapter, my computer "unplugs" my usb even though it is still plugged in.
View 4 Replies
View Related
Mar 14, 2012
I have the same problems with the Cisco EPC3925?Everytime a wired pc reboots/boots everyone on the network losses internet, also wireless is disconnected. Also everyone get unidentified network and later its set to public network.We are using a Sitecom switch LN-120. I have to unplug this switch, then restart the router to fix the problem each time. Then I can plug it in again and everything is fine.The router will not restart (does not go further then 2nd blinking LED.) if I do not unplug the switch.
View 8 Replies
View Related
Jul 9, 2011
I have a Linksys RPT300 (firmware 3.1.27) which I need to pass magic packets on port 9 to internal computer. on LAN the WOL works perfectly.I have masked my local lan to 255.255.255.128 to be able to broadcast on another subnet address than x.x.x.255 which the web interface dont seem to allow.Local LAN is 192.168.15.x and I have created a port forward on port 9 UDP to local broadcast address wich would then be 192.168.15.127. However nothing comes through and I cant seem to find a setting to enable/disable internet broadcasts. Is there a work around?
View 1 Replies
View Related
Nov 4, 2007
I have a linksys BEFSR41 V.2 router with four ports. Ports #1 and #3 are working but the other two do not. The diag. light just blinks rapidly.
View 4 Replies
View Related
Jan 28, 2011
Working System: Arris -> BEFSR41 (dhcp) -> to four computers working fine.
As soon as I add the EZXS16W, computers plugged into EZX no getting internet. I have the back button depressed so it will work as a 16 port hub.
Not Working System:
Arris -> BEFSR41 Port 1 ----------------------------------------->EZXS16W ----> Computer (not working)
BEFSR41 Port 2 ->Computer (working) EZXS16W ----> Computer(not working)
BEFSR41 Port 3 -> Computer (working) EZXS16W ----> Computer(not working)
BEFSR41 Port 4 -> Computer (working) EZXS16W ----> Computer (not working)
View 5 Replies
View Related
Mar 3, 2011
I have RVS4000 v02 and created 3 VLANs - 192.168.70.0/24, 192.168.80.0/24, and 192.168.90.0/24 . I tired to created IP based access list to deny network 192.168.80.0/24 and 192.168.90.0/24 to have access to 192.168.70.0/24; and deny 192.168.90.0/24 to access 192.168.80.0/24.
MY ACCESS LIST from RVS4000
Deny All Protocol LAN 192.168.80.0/255.255.255.0 192.168.70.0/255.255.255.0 Any Time Every Day
Deny All Protocol LAN 192.168.90.0/255.255.255.0 192.168.70.0/255.255.255.0 Any Time Every Day
Deny All Protocol LAN 192.168.90.0/255.255.255.0 192.168.80.0/255.255.255.0 Any Time Every Day
Allow All Service LAN ANY ANY Any Time Every Day
Allow All Service WAN ANY ANY Any Time Every Day
* all access list is enabled.Both 192.168.80.0 and 192.168.90.0 network can still reach 192.168.70.0 network.
View 1 Replies
View Related
Dec 8, 2011
I have an E4200 router & am trying to get it to work with ATV2 through HomeSharing & iTunes. It works fine when my PC is wireless & the ATV2 is wireless. BUT, when the ATV2 is wired via ethernet & the PC is wireless -- nothing!
PC is Win 7 64 - SP1
ATV2 is 4.4.3 (3323) and the router is:
E4200 is 1.0.03 build 14
View 4 Replies
View Related
Mar 11, 2011
My sony vaio (vista) has stopped working wirelessly. I have tried it at two locations with two different networks and modems and both times it would not work. So its the laptop that must be at fault. I can connect to the internet through the ethernet cable.
View 14 Replies
View Related
Jan 24, 2013
We have 3 pcs connected to the router via cable and 2 more pcs connected through wireless. Everything works great. But when I try to connect (want to connect 2 more laptops via wireless) either one of the two laptops, the whole network stops working immediately. I have tried updating the drivers (they are up to date), removing the password from the router, gave the laptops static IPs (and all other pcs as well) with no results. As soon as one of the 2 laptops joins the network through wireless, it stops working for everybody. However if I connect them through the cable they work fine. One of the laptops uses win vista 64 bit, the other one win 7 64 bit. We have cisco RangePlus Wireless Router wrt110.
View 1 Replies
View Related
Jul 22, 2012
I've got a Gateway 2wire 3800 HGV-B router which works fine wirelessly, but when using an ethernet cable to connect to the internet, it doesn't even recognize the computer. My laptop runs wirelessly all the time, and I recently picked up a desktop PC for home here, and it's the first wired connection I'm using, but for some reason the wired connection isn't connecting to my network, but instead it's own Unidentified Network.
View 2 Replies
View Related
