Virtual PC And Windows XP Mode Network Connectivity

Jun 17, 2011

I have 64bit Windows7 Professional OS, and have installed Windows XP Mode, I have a wireless and ethernet-capable Router. My HP PC has both wireless and ethernet connection capability.When running Windows 7 alone, the Internet access is connected by wireless to the Router, and runs well but when I start Windows XP Mode, the Intel 21140-based PCI Fast Ethernet, complains if the Ethernet Cable is not plugged in to the Router.When I plug it in, I still get no Internet connectivity, the error is Windows cannot obtain an IP Address. How can I have the wireless and ethernet connectivity co-exist together or separately when required.

View 5 Replies


ADVERTISEMENT

Limited Connectivity Ms Virtual Wifi Miniport Adapter

Dec 28, 2011

I have created a virtual WiFi hotspot in win 7 laptop with following commands. netsh wlan set hostednetwork mode=allow ssid=wii key=abcd1234 Now there is a 'Wireless Network Connection 2'(MS virtual WiFi miniport adapter) in my network connections. netsh wlan start hostednetwork WiFi hotspot started and visible in my other wifi device. But the device shows limited connectivity and i can not use internet not even local access to laptop.

My observations - I found that the IP address and DNS of WiFi miniport adapter is 192.168.11.1 But the IP assigned to my other device is 169.XXX.XX.XX which is not in same subnet

So how to set the WiFi miniport adapter of my laptop to assign proper IP address(within subnet) to my other device. So that i can get rid of LIMITED CONNECTIVITY ISSUE .

C:Userssam>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : samlaptop

[Code]......

View 2 Replies View Related

Windows 7 Cannot Identify Network And Get Limited Connectivity?

Oct 31, 2012

I'm running windows7 and I have problem with my network. When I connect to the router it can detect the router but it cannot identified the network and get limited connectivity. I have tried using wireless and LAN connection and it result the same problem.

View 1 Replies View Related

Unidentified Network With Limited Connectivity On Windows Vista

Jan 2, 2013

It is running on windows vista home premium 32 bit sp1, if that matters.I have just had my computer's motherboard changed recently. After reinstalling the wireless adapter, the internet works! Until I found when I came back later that my internet shows unidentified network with limited connectivity. It happened when I was not around and my computer went into hibernate mode after downloading firefox installer. There is no antivirus installed, so it can't be a problem. My wireless adapter is the usb type,brand tplink: TL-WN721N. Tried a few methods suggested by the internet but nothing works: unchecking the iv6 box, follow the steps that starts with the regedit part, uninstall and reinstall the driver for the wireless adapter, fix the ip address.There is no problem with the network as the rest of the computers and laptops in the house has no network issues. But all of them are running on windows 7.

View 19 Replies View Related

WGR614v9 / Windows 7 Desktop Loses Network Connectivity Twice A Day

May 24, 2011

My primary home machine loses network connectivity for a very brief moment once or twice a day. Here's what I've observed over the past few months:

Seems to happen every 12 hours after a restart Disconnect is very, very brief. Putty sessions, online games, or other applications that require a consistent connection disconnect but it's rare that I can see a ping fail when everything else disconnects.Does not coincide with network problems on other machines (Xbox/media PC/wife's PC).

Other details about my system and home network:

Windows 7

Asus motherboard (couple generations old) with onboard ethernet

Ethernet > wired hub > wireless router > cable modem (wife's PC is connected to the same hub and does not have the problem, at least not on the same schedule)

Things I've tried (and will probably now try again just in case)

Restore network card driver (I'm in the process of finding a specific one for my motherboard)

Tinkered with power saving settings in the ethernet card drivers.

Fully up-to-date Windows install.

Static IP address reserved by the wireless router running DHCP

I'm not 100% sure, but I think this problem persisted across Windows OS upgrades (from Vista to Windows 7 a few months back)

By far the weirdest part is that it seems to happen every 12 hours. Like clockwork, I can predict that I'm going to disconnect from any persistent online connection if I know the last time I restarted my machine.

Solved:I caused my own problem long ago when trying to set static IP addresses in my home. I have a Netgear Router (WGR614v9) and I played with the Address Reservation feature. In addition, I manually set the IP address I wanted to have on my machine using the normal network card properties. Setting the IP address manually is what seems to have caused the conflict.

Finally looked in the Windows Event Viewer and the culprit was quickly identified. At time of restart and every 12 hours later, the following error appeared:

The IP address lease 192.168.1.20 for the Network Card with network address XXXXXXXXXX has been denied by the DHCP server 192.168.1.1 (The DHCP Server sent a DHCPNACK message).

I accidentally fixed it for all affected machines by changing the start address of the DHCP server on the router (increased it from 20 to 30). That seemed to kick all the manual entries out and set them back to automatic obtain mode.

View 1 Replies View Related

Windows Xp Stuck On Acquiring Network Address Or Limited Connectivity

Oct 23, 2011

I connect to the internet using a wireless USB. I woke up this morning and the internet showed that it was connected yet it wouldn't allow me to open the web or anything such as "msngr" I took the wireless card out for a couple minutes and then tried. That didnt do anything but say acquiring network address. I am not that knowledgeable when it comes to computers but these are the things that I have tried so far :

I went into properties and configure USB . . Made sure that the SSID said "Any" I Also tried going into properties and tcp/IP internet protocol and made sure it was on obtain IP address automatically . Hmm I tried. RUN>SERVICES> to make sure that the DHCP and TCP were started and on Automatic. I then tried system restore :- (went back about 2 weeks) . . Nothing. I then tried RUN>CMD>IPCONFIG/RELEASE *ENTER* IPCONFIG/RENEW *ENTER*.

when I did that it showed wireless network is now connected, yet back to ground zero. It wont let me browse. Its not really connected. When I look at the connection status, signal strenghth is good. Packets sent & received are good. I feel like there is just something little that. I am not getting, that is making this happen.

View 12 Replies View Related

Linksys Wireless Router :: Ea3500 Bridged Mode And Windows Network Drive?

Apr 5, 2013

I'm runing an ea3500 in bridged mode, classic configuration, firmware 1.0.30 build 126544. I got ftp working for my usb attached wv delements drive , but it is totally invisible in windows (except for ftp of course).I read in an older post that the usb drive in certain situations does not work (independent of disk manufacturer/type and such) and for certain configurations the ftp option might work but the windows mapped network drive doesn't , does that still apply? does it apply to bridged mode ?

View 1 Replies View Related

Dell :: D610 Intel PROSet - Wireless In Windows Mode Not Picking Up Network In Range

Apr 16, 2012

D610 - Intel PROSet

tab: Advance>>"Use Windows to manage WiFI" (F10)

When in Windows MODE the view network in range does NOT pick up anything even though the connection still exists.

How do I configure to see the networks in range ?

View 12 Replies View Related

Setup LAMP On Virtual Box On Windows 7?

Nov 20, 2011

I want to setup LAMP on Virtual Box on Windows 7. I am wondering if it is possible to (regular cable modem from ISP connected to desktop through ethernet port, dynamic IP)

1) Connect from Windows7 to Linux (Apache, MySQL-server, etc...)

2) Connect from Linux to the Internet

3) Connect from Windows 7 to the Internet ...all at the same time?

View 13 Replies View Related

How To Connect Multiple Virtual Machines On Windows 7

Apr 22, 2013

I have installed 4 virtual machines using virtualbox on a windows 7 host and i'm searching how i could connect them so as they can communicate each other.

View 2 Replies View Related

Cisco :: Upgrade LMS Windows 3.2 To Virtual Appliance 4.1?

Sep 5, 2011

currently have LMS 3.2 on a Windows server. I'd like to upgrade to 4.1 on a virtual appliance. I don't care about migrating data and would probably like to just start fresh. My question is If I were to download the 4.1 evaluation virtual appliance and also purchase the 3.2 to 4.1 upgrade license would I be able to apply that license to the evaluation?

View 6 Replies View Related

Cisco WAN :: 1941 Router - Enable IPSec Virtual Tunnel Interface With Tunnel Mode IPv4

Sep 23, 2012

I'm in process of purchasing a new Cisco routers for our branches that will be used primary to enable IPSec virtual tunnel interfce with "tunnel mode ipsec ipv4". does the default IOS IP Base supports this feature? or i need to purchase DATA license or SECURITY license?

View 4 Replies View Related

Windows 7 - Connect Virtual Machine To Host Via IEEE1394 / USB Or Serial Port

May 15, 2013

I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.

I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.

Does any know how to do this, or if there's another (preferably more simple) way of doing it?

View 1 Replies View Related

Linksys Wireless Router :: E3000 Lost Connectivity When Go Into Sleep Mode

Apr 1, 2010

I have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?

View 9 Replies View Related

Cisco Infrastructure :: 2509 - Create The Virtual Com Ports On Windows And Linux Machines?

Sep 5, 2011

I recently acquired a 2509 router that I plan to use as a serial device router.  My question is, how do you create the virtual com ports on Windows and Linux machines to point to the TCP address:ports in the 2509 router?  Is there software or drivers that do this?  Or something third-party?

View 12 Replies View Related

Home Network :: Virtual Servers On One IP Address

Aug 6, 2012

I have one dedicated IP issued to my home, along with another dynamic one if I need it(but I don't use it). I have a webserver, mail server, and name server up and running on a single machine exposed to the internet with my static IP. I have a domain name registered to my IP address. My webserver and name server work great, but I am having difficulty with the mail server. In order to have mail work correctly, I have been told that I need to get reverse DNS setup for my domain (something I had neglected to do). My nameserver responds to reverse lookups correctly when issued locally, but it looks like queries from the internet never reach it (I think my ISP catches requests upstream). I contacted them and they put a PTR record in for my IP pointing to ns1.mydomain.com. This all works fine, but the thought occurred to me that if in my hosts file I put my MX record in as mail.mydomain.com., any mail clients that do a reverse lookup of my IP won't get mail.

View 6 Replies View Related

Servers :: How To Create Virtual Network With Domain

Mar 10, 2011

I am taking a college course using Microsoft Windows Server 2008 Administrator Lab Manual. The labs assume that you are in a MS lab with the ability to connect to thier domain and servers. I want to create my own virtual lab to simulate MS environment so I can follow the assignments. I have VirtualBox installed. I am a completely new to servers and networking

View 2 Replies View Related

Boot Virtual Desktop From Hyper-v On A Network

Apr 29, 2013

I already know there's an easier way of doing this; DHCP, TFTP and CCBoot.But this is not what I want.I have Hyper-V installed on a Windows Server 2008 R2 with a Windows 7 VM installed on it.What I wanna do is take this image of Windows 7 and boot it on another PC on the same network. The client PC doesn't have a hard disk so I want to boot it using a USB stick.I've already installed and configured Remote Desktop Roles and was able to access the Hyper-v VM using a browser locally.So what can I do next? I can't take the .vhd image and put it on a usb stick because it's too large (30GB) and converting it to .vdi would still be large.

View 3 Replies View Related

Adding Virtual Network Card And Assigning IP?

Sep 3, 2012

I have a win xp system which connects to internal network & Internet. The problem I have is, for each work i need to change the IP address.

Ex: For internal network the ip should be 192.168.0.1 To connect to internet the ip should be 192.168.1.1

Now I want to be connected to both internal network as well as internet at the same time. So what should I do ?

* I can not add another physical network card.

* I can not change the IP's of any other system or config servers etc... (as it is used by our internal application, doing so will make a mess.)

* I have the admin rights so any software changes to my system can be done.

So i was hoping to add a virtual network card, and configure it to the new IP. So can that be done ? if so how ?

View 7 Replies View Related

How To Allow Two Machines On Virtual Network To Communicate Statically

Feb 18, 2013

Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.

View 4 Replies View Related

Home Network Access From Virtual Machine

Mar 3, 2013

I recently installed VMplayer on my Win 7 machine, and I installed Win XP on the VM. So far everything seems to work fine. However, on my home network I have a Linksys NSLU2 mini network server which has a flash drive plugged in that contains my files that I access from any of my home PC's. No problem accessing it from the Win 7 machine, but when I try to setup a "new network place" on the XP system, I get an error telling me that the address is not valid.

View 8 Replies View Related

Cisco :: LMS 3.2 Virtual Network Manager Home

Sep 8, 2011

LMS 3.2  Virtual Network Manager Home  i am getting this error on lms 3.2.1 in vnm.

View 1 Replies View Related

Ubuntu 12.04 / Virtual Machine Network Configuration?

Sep 22, 2012

My host OS is Ubuntu 12.04 and I am running a LAMP stack there. I have several Windows virtual machines (XP and Windows7) running in Virtual Box so I can test IE6, IE7, etc..

I frequently move this laptop between a few wireless networks and sometimes I am without an internet connection. I pause and save the VM execution state. Regardless, I want the virtual machines to be able to access the sites I am hosting locally on Ubuntu. The virtual machines do not need regular internet access. On the host I can point the browser at localhost or any subdirectory that apache is serving and view pages I've set up already. What is the best configuration for this?

Should I use Bridged or NAT virtual adaptors and should the guests use static IP's or DHCP ? I've also considered using ad-hoc networks between guests and host, but I think this will require that the host disconnect from any other networks (with internet access).

View 1 Replies View Related

Limited Connectivity In Windows XP

Oct 23, 2012

My desktop PC ran Vista Home Premium and about over a year ago, suddenly developed the dreaded, 'Limited Availability' connection error when I tried to connect via ethernet cable to my D-Link dir 615 router.I have tried all possibilities (detailed in the other forums I have posted this issue in), like all the ipconfig commands in the CMD prompt, rebooted modem and router and pc but still getting this issue. [codde] As you can see - the Belkin wifi dongle connects fine, with an IP address of 192.168.0.101, however, the SiS191 ethernet controller (which has current and up to date drivers) refuses to connect and gives an IP of 169.254.241.0.I have also tried copying the settings from the wifi dongle and manually entering them for the ethernet connection but this also does not work..I don't think its an issue with my router as I also have a laptop, connected via ethernet, which works fine. Also have 2 iPhones, 1 iPod, 1 iPad, Xbox and Wii which ALL connect to the same router (via wifi) without any issues.

View 5 Replies View Related

Windows XP Pro Limited Or No Connectivity

Jul 12, 2011

Okay so I have a dual boot computer(windows xp3 and Linux Ubuntu). The Ubuntu wireless works so that means my hardware actually works, but my windows xp doesn't connect. First I have the xp3 so my recovery disk from Toshiba some of the stuff is outdated. I installed intel chip-set, intel proset(my wireless) , wireless LAN, oh the stuff that have to do with wireless and still doesn't work. This is what happens, proset finds the router tries to connect and it says limited. I tried repairing it but nothing works. P.S. the stuff that are outdated are like the QFE ( those are a lot of files in my Toshiba recovery and every time i try to install them they don't work they say that the system I am using is better than the stuff i am trying to install)(QFE is also just the name in front of the file and there is at least 25+ , don't know why it is QFE)

View 3 Replies View Related

Unpredictable LAN Connectivity With Windows 7 Pro

Mar 2, 2011

I updated my Lenovo laptop from XP Pro 32 bit to Win 7 Pro 64 bit.Since then, at irregular intervals, I cannot obtain an IP address on either wired or wireless connection. When this happens, there is no connection to the LAN; all other LAN pcs work and obtain IP addresses. I see this on wired and wireless networks that are set up to provide IP address by DHCP; it is not unique to my router and access point.I ultimately resolve it by powering down, disconnecting battery and electric power for about 1 min, reconnecting and starting up. Sometimes I go through the power cycling process several times.I can log off my network, and come back to it later without having used my laptop and have log in problems. Sometimes, when away I log into other networks, come back and have log in failure; other times I cannot log onto other networks.Ipconfig shows IP addresses of my LAN (from previous connection) yet there is no connection and pinging default gateway fails when I have connection issues - and ipconfig /release or ipconfig / renew fails claiming no connection.This happened after Win 7 was installed. When connection fails, both wired and wireless fail to connect. Assigning static IP address does not work.

View 1 Replies View Related

Home Network :: D-Link DSL-2542B Virtual Host?

Feb 23, 2011

I've been trying to set-up DMZ for my DSL-2542B-SE_1.00_06112008.

But the problem is when I access my IP from WAN, It connects to Router Control Panel, I have set DMZ IP as 192.168.1.2 which is the my computer where I have the Server set-up.

Now I've disabled DMZ but still I can access to my router from WAN through my IP.

View 2 Replies View Related

Wired LAN / Limited Or No Connectivity Windows 7 X64

Mar 5, 2012

I am experiencing an issue with a LAN connection on my Desktop computer running Win 7 x64 with an NVIDIA nForce Networking Controller. I am receiving a "Limited or No Connectivity" message but I know the Router and LAN cable are good as I can plug it into a laptop sitting right next to me and do not experience any issues.I have checked the original manufacturers website for drivers however they do not offer any for Win 7. Trying the Vista x64 drivers results in the same limited connectivity issue.Hardware Specs I have on the Computer:

- Shuttle SN68SG2
- NVIDIA GeForce 7025
- 7 Series Glamor small form factor XPC Barebone

I have also tried the latest drivers from NVIDIA with the same results. [code]

View 2 Replies View Related

Limited Or No Connectivity With Wifi Using Windows Vista

Dec 30, 2011

I am trying to connect to the internet using both wifi and wired directly to the router and keep getting the same message "limited or no connectivity". It will see all the available wifi networks, and will even connect to the network, but no internet. I have used google and tried several solutions but to no avail. Also, just fyi, i currently have my desktop hardwired to router, and another laptop, ipad, ps3, wii, droid bionic and a couple of netbooks that all can connect to the router using wifi with no problem what so ever. I have also tried to connect to other networks with the same results. There are 2 network adapters, a broadcom netlink (tm) gigabit ethernet and a dell wireless 1397 wlan mini-card. Here is the ipconfig/all.

View 16 Replies View Related

Limited Or No Connectivity For Wireless Connection Windows XP Sp2

Jul 26, 2011

I have gone through the previous post related to limited or no connectivity.But I am still not able to figure out the problem with wireless connection in my windows xp sp2 OS.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAnuj>cd ..
C:Documents and Settings>ipconfig/all

[code]....

View 4 Replies View Related

Acer Laptop - Limited Or No Connectivity In Windows 8

Dec 16, 2012

I bought an Acer laptop running on Windows 8, but the internet would disconnect every few minutes and it would say no internet connectivity or limited connectivity.
I replaced the PC with an other one and I had the same problem. so I returned the PC and bought a Packard Bell running on windows 8 as well, but again the same problem. I do have other computers in my household working fine (not windows 8).

View 14 Replies View Related

No Connectivity (wired Or Wireless) After Infected Windows Gen2

Dec 30, 2011

From my company for a new line of work I started. Was "deep frozen" when I got it and was useless to me in that state. Got it thawed and it suddenly wanted to do loads of updates, so I let it. Apparently I was not careful enough & got the "XP antivirus 2012" malware.Eventually conquered that beast and installed avira free.almost immediately avira picked up on the "html/infected win.gen2" malware.I quarantined, deleted, scanned comp. w. avira, rkill, & malwarebytes. all scans came up clean but I now have no connectivity. wired conn. continually tries to acquire network address and w.less has limited or no.Not my router or modem as I have 2 home comps actively cnctd as I type this. Also tried multiple other networks w. same neg. results.After loads of searching and t/s'ing I believe I have found the root of the problem: When I look under "services" I found that "netbios helper", "Network Location Awareness" & "dhcp client" are all not started.

Trying to start them results in failure b/c some "dependencies are marked for deletion". the afore-mentioned 3 things are dependent upon the Netbios over tcpip and tcpip protocol driver. Those drivers are in the system32/drivers folder but I cannot find a "non plug and play" section in the device manager.Yes, I looked under "hidden devices" and I looked in every drop down. I successfully cmd: netsh int ip reset c: esetlog.txt but when I tried to reset winsock I got winsock is not recognized as an internal or external command, operable program or batch file.I have no reboot disk or thumb drive and bios is p/w'ed so I can't wipe the slate clean and start fresh. Is there anything I can do short of giving it to the "IT guy" at work? That's a black hole I'd really like to avoid if possible.

View 3 Replies View Related

Dell Laptop With Windows 7 - Ethernet Dropping Connectivity?

Sep 9, 2011

I recently bought an alienware mx14 laptop last week and i am having some strange issues with the Ethernet card.The connection seems to drop from time to time at random periods, altough wireless works fine, the wired connection just loses connectivity for brief moment. The only way i notice this if, i am streaming something and it just stops the buffer or if am at the lobby of League of Legends and get timed out or, any http transfer gets cut out.I have an atheros card and w7 64bits installed with the latest drivers from Dell and have uninstalled and reinstalled them a couple of times, and they seem to work for a couple of hours , after a while getting back to the some problem.

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved