Ubuntu 10.10 On Virtual PC 2007 - Cannot Connect To Internet
Feb 17, 2011I have installed Ubuntu 10.10 on Virtual PC 2007 on my desktop Windows machine. The internet connection has failed.
View 2 RepliesI have installed Ubuntu 10.10 on Virtual PC 2007 on my desktop Windows machine. The internet connection has failed.
View 2 RepliesMy host OS is Ubuntu 12.04 and I am running a LAMP stack there. I have several Windows virtual machines (XP and Windows7) running in Virtual Box so I can test IE6, IE7, etc..
I frequently move this laptop between a few wireless networks and sometimes I am without an internet connection. I pause and save the VM execution state. Regardless, I want the virtual machines to be able to access the sites I am hosting locally on Ubuntu. The virtual machines do not need regular internet access. On the host I can point the browser at localhost or any subdirectory that apache is serving and view pages I've set up already. What is the best configuration for this?
Should I use Bridged or NAT virtual adaptors and should the guests use static IP's or DHCP ? I've also considered using ad-hoc networks between guests and host, but I think this will require that the host disconnect from any other networks (with internet access).
I just installed ubuntu 10.10 and I'm unable to connect to the internet. I checked for device recognition and the output is DISABLED which apparently means that my network device may be turned off. How can I turn it on. Windows is no longer installed. By the way I'm an ubuntu newbie. Hence, I wiped my hard drive during installation.
View 1 Replies View RelatedI don't get whats the problem but when i try to run the following command :
sudo apt-get update
I was getting an output of sort...
0% [Connecting to us.archive.ubuntu.com (91.189.91.13)] [Connecting to security.ubuntu.com (91.189.92.184)]
0% [Connecting to us.archive.ubuntu.com (91.189.91.13)] [Connecting to
[Code]....
And our institute uses a proxy server... when i try to ping that server it was pinging these servers but not the external servers...like security.ubuntu.com or some other site... I can access internet from my browser, but the software center is unable to download anything.
I am reading my gmail through Outlook 2007, using imap. When my computer is connected to the router by cable, everything works fine. When I try to connect wireless to the same router, it wont work. I can send e-mails, but outlook will not download new mail og syncronize with the server.
View 1 Replies View RelatedI have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .
Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .
I've finally made the jump into Ubuntu and put it on my laptop. I have never used Linux before so it will be a bit of a learning curve although it does look quite user friendly.
I have already connected my Ubuntu laptop to my wireless router so I have internet. I would just like to be able to access files on my PC and vice versa similar to Windows Homegroup but I have no idea how.
PC = Windows 7 Ultimate - Laptop = Latest version of Ubuntu (I think it's 11?)
if i want to connect d-link router to system it asking for password i enter admin /password it is not accepting
View 1 Replies View RelatedI have installed Ubuntu on my HP laptop within Vista, because I am using the wireless adopter TP-LINK TL-WN721N to connect, I am not able to find the correct driver and install it.
View 1 Replies View RelatedWe are having a network of 7 computers and a server (Ubuntu server). The problem is, two of them are not connecting to the network. When i check the network card of these two systems, it seems working (the green light is blinking). When i replace these systems with a laptop, it connecting to the network and there is not problem at all.
View 4 Replies View RelatedI have a Sony Viao PCG-71312L laptop that has Windows 7, 64-bit as OS. I loaded on Ubuntu as want to learn more about Linux. The wireless locator finds the signal but won't connect.It says "ethos" and then when you click from there I don't get through. Just seems to keep looking forever, then says after 3 minutes can't connect.It could be I need a specific driver for the Ethernos wireless device, I am not sure. Further I am had a hacking where I had to change wireless settings so I may have done it myself. I am able to connect on my Windows 7 wireless network account but not the Linux one. I tried deleting the account on the Linux Ubuntu that shows up but this didn't work.May have made worse.Is this on my wireless device side, meaning I need to change/get password ect or the Ubuntu side where it's some type of common problem. Do I need to access through the router web page? Incidentally that's blocked for me too.
View 2 Replies View RelatedI want to connect two laptops for experiment purpose. I do not want to use the internet on any of them , just be able to ping from one pc to another and SSH into them. The use is basically for a mobile robot , one pc on the robot and another one to control and see the processes using SSH. How do I use a wireless router to create such a network? I am using Ubuntu on both system (I tried ad-hoc but its not working).
View 1 Replies View RelatedI have 2 PCs, an Acer H340 and a network printer wired to the WAG320N; two other PCs are connected wireless. On every PC I have Windows 7 and Ubuntu (except the NAS with WHS).When I boot with Ubuntu on every PC, I can print, I can connect to intenet, open the Web interface of the WAG320N at 192.168.1.1 but I CAN'T see the NAS and the other PCs: this with the wired PCs and the WiFi connected ones. A Galaxy Tab can browse the NAS content and the Web.I didn't had this problem with the modem router I had from the ADSL supplier and the Huawei D100 I used before.On the network map of the Cisco Network Magic the Linux PCs are showed connected to the WAG320N with a dotted line, when the W7 ones are connected with a solid line.
View 3 Replies View RelatedI setup a wifi Hotspot in my desktop(Ubuntu 12.04), and was able to connect to it using my laptop(also Ubuntu 12.04).
My desktop is connected to Internet using Ethernet cable and I can access internet from my desktop but not from my laptop.
Also I can ping successfully to my router from my laptop, but still no internet.
Desktop routing table.
$ /sbin/route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1
10.42.0.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan1
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1
I have a laptop1 which has its two interfaces ( wired and wireless ) working. And have another laptop (laptop2) for which only wired interface works.
I am planning to connect the two wired interfaces such that laptop2 can connect to internet through the wireless interface of laptop1. How to achieve this? Both systems use Ubuntu 10.04 Desktop edition
I've tried two operating systems (Ubuntu 12.04 and Windows XP) two different wireless adaptors (Dell M1530 internal adaptor and Alfa USB Adaptor which I get full bars on) and tried a different Dell M1530 laptop which I'm also having issues with. I've also tried to diagnose the network with a tool, but I'm totally unable to connect to it so I'm unable to get any more information.If I try to connect to an unsecured network, it works perfectly. I'm totally stumped about this, due to the fact that I've used two different operating systems, two different adaptors and two different laptops (albeit the same brand).
View 4 Replies View RelatedIf I have two servers, one running Windows Server 2003, and one running Ubuntu 10, what would be the best way to 'map' one's drive to another? Either way is fine. They are each in a different state, and each have an external IP. I just need to do some processing on the Ubuntu server, then write the file either to its own drive, and have the web server (Windows) read it, or, have it write to the Windows HDD, and have Windows read it.
View 2 Replies View RelatedI use a limited usage internet plan and want that when I surf approx 10MB of data my connection automatically stops further download untill i reset or increase the usage.
View 2 Replies View RelatedI'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router.
I'm able to connect to the Internet using this same cable using a Windows machine, way Linux is configured. [code] It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router. I'm able to connect to the Internet using this same cable using a Windows machine, so there's something wrong with the way Linux is configured.
Here are my network settings on Linux:
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[code]....
It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
We have a ASA 5510 which was running 8.0.2, we recently upgraded it to 8.2.5 and since the upgrade remote users for exchange 2007 are not able to download any large email attachments(over or close to 1MB). This is only happening to Outlook anywhere users or OWA users who are connecting to the exchange server using https(443) externally. If the same users connects internally they do not face any issue. When i check the logs on ASA i am gettings lots of RESET-O and RESET-I entries. Looks like the connection between the client and the server gets reset.
View 14 Replies View RelatedIs there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510?
View 1 Replies View RelatedI'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.
server 2003 windows xp running on virtual PC I'm running windows 7 on my computer
Outlook 2007 worked fine with my old router and when our laptops are connected on other networks. But both home laptops take about a minute to go through the "receiving mail" process with GMAIL pop3 accounts when connecting through the new E4200. Everything is factory default, and I reinstalled Outlook. This problem does not occur with the roadrunner email accounts also set up in Outlook
View 7 Replies View RelatedIs there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510?
View 2 Replies View RelatedI have installed 4 virtual machines using virtualbox on a windows 7 host and i'm searching how i could connect them so as they can communicate each other.
View 2 Replies View RelatedWe have a Cisco secure VPN site to site tunnel between the 2 locations.Which ports are need to open on tunnel so that users can successfully use OCS over the site to site VPN tunnel.All the users are havning the main brach AD account.Using Wireshark captured the packets, found only port TCP 5060, after allowing this port over tunnel I can see the authentication window.The user authentication fails. Already port 3389, 80, 443 are allowed.The main requirement is to only have the Chat, Group Chat and file transfer. Not require AV traffic.OCS is using TCP. no TLS is configured.
View 1 Replies View RelatedI wish to access my virtual pc remotely, As i have downloaded OTRS ticketing system on a virtual machine and i wish to access it remotely. The physical server IP is 62.84.xx.xx the Virtual server IP is 10.0......"check link below please"
View 2 Replies View RelatedRunning a Windows 7 laptop plugged into a LAN using ethernet cable with internet.The built-in wireless nic on the laptop connects to a totally different internet network. I set up an XP Mode Virtual PC on the laptop with the intention that it would use the wireless internet connection.I set this up by installing Microsoft Loopback Adapter, then sharing the wireless nic to it. The Virtual PC is set to use the Microsoft Loopback Adapter as its network connection.My problem is that only the hard wired internet connection works.The wireless is connected and has an ip address, however no traffic flows through it until i either disable the cabled network or physcially unplug the cable. Is it possible to have my host laptop use the cabled internet connection and my virtual pc use the 2nd wireless internet?
View 1 Replies View RelatedI installed virtual pc 2007 that has winXP and my host is Windows vista. I was able to make my virtual pc to connect to host internet using NAT for adapter 1 long time ago without any problems but it is not working anymore since last month! Although it works when I try it on another host. I believe the problem is in my host so what to check excatly in my host.
View 1 Replies View RelatedImplement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
I followed this guide [TUT] Setting a static internal IP (Windows and Linux)but what has happened is that now the two machines can't connect to the internet.
So I'm trying to set up my computer to act as a virtual router so I can connect another device to the network.I can successfully create the network but it doesn't seem to be sharing my internet. I believe the problem may be that on the sharing tab for the initial internet connection there is no drop down menu like the one below.
View 5 Replies View RelatedImplement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly. I followed this guide http:[URL]....tid=210 but what has happened is that now the two machines can't connect to the internet. How can I fix this?
Here is a links to the ipconfig/ all on the XP virtual machine http:[URL]....the default gate way here is the same as on my actual working machine.