VGN-SR490 Missing Eth0 Ethernet Interface In Ubuntu / Can't Connect To Router
Aug 26, 2011
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router.
I'm able to connect to the Internet using this same cable using a Windows machine, way Linux is configured. [code] It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
View 4 Replies
ADVERTISEMENT
May 6, 2012
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router. I'm able to connect to the Internet using this same cable using a Windows machine, so there's something wrong with the way Linux is configured.
Here are my network settings on Linux:
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[code]....
It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
View 3 Replies
View Related
Feb 15, 2012
I have my wan connection on the eth0. The bandwidth is 2mbps. I am running qos on that interface saying 192.168.200.0/24 can use 80% of the bandwidth and 192.168.201.0/24 can use 20% of the bandwidth. I Also have vtun VPN inteface to our branch office. I also wan to run some qos on that interface. How do i go about allocating the bandwidth on this interface? it is actually going via the eth0 interface, but the system actually see's it a an independent interface on its own right, so it requires it's own qos policy.
View 3 Replies
View Related
Sep 23, 2012
My e4200 freezes and not connect in any interface not Ethernet not wireless, i connect reset in any way ( push the reset button, push the reset button an unplug the power.
View 9 Replies
View Related
Jan 28, 2011
Can I connect my Canon iP6600D printer (USB 2.0 interface) to an Ethernet port on my wireless router so as to end up with a network printer?
View 1 Replies
View Related
Apr 9, 2011
Is it possible to set up a WAN interface on a FastEthernet interface of a Cisco 877 Adsl Router ?Due to my ISP, i've to use an external VDSL modem and must connect it to my cisco 877 router (and leave it's adsl interface unused).But i don't know how to set up a wan port, other than the adsl interface itself (dialer0), on my cisco.
View 7 Replies
View Related
Jun 27, 2012
I am wondering how to share my mac desktop's wifi to an ubuntu 12.04 box via ethernet. I know how to share the internet from the mac but don't know how to connect to it on the ubuntu box. I have made ipv4 connection but internet doesnt work on both.
View 6 Replies
View Related
Nov 22, 2012
I have a machine with two ethernet cards and internet connection, on which Ubuntu 12.04 is installed.Both ethernet cards can take ip adress automatically say,
eth0:47.168.137.14 and eth1:47.168.137.15
I can ping eth0 but can not ping eth1.
Is there a special setting for gettting both ethernet interface active and reachable at the same time.
View 1 Replies
View Related
Oct 13, 2012
I want to connect two laptops for experiment purpose. I do not want to use the internet on any of them , just be able to ping from one pc to another and SSH into them. The use is basically for a mobile robot , one pc on the robot and another one to control and see the processes using SSH. How do I use a wireless router to create such a network? I am using Ubuntu on both system (I tried ad-hoc but its not working).
View 1 Replies
View Related
Jan 8, 2013
Made a big mistake - Installed 64 bit Win7 professional on new HP that had 64 bit Win7 Home premium on it. Computer was a gift, bought as the last one available and was a demo model from Sam's club. Had no idea the ethernet card driver and the wireless software drivers would be lost, but they were, as was the driver for the USB hub. (Used an HP OEM disk purchased on line from Mountain software.)Where to get these drivers, and which ones do I need?
View 1 Replies
View Related
Oct 14, 2011
I am working with windows xp Connected wired(ethernet) Now i am struggling with network connection problem when i checked in Control Panel-->Network Connection options i found that there is no LAN icon displayed And the "NETWORK ADAPTER ICON" is missing in Device manager.what should i do to connect to internet and to get the network adapter icon
View 1 Replies
View Related
Dec 5, 2011
I have a HP Compaq NC4000 with windows Home Edition XP and and under Network connections I no longer have my ethernet connection icon.My LAN (the wireless conection is fine)I have reinstalled the ethernet driver from the HP support and reboted the system yet the icon still does not show.Under Device mangaer only the Wireless is showing (right click my computer, properties, Hardware, devicemanager, network adapters)When i disconect from the wirless There is no conection to ethernet
View 12 Replies
View Related
Dec 27, 2012
My hard-drive crashed, and I bought it refurbished, so I never got a Windows disc. I got a hard-drive from a friend, and I am trying to use it with my laptop, but it is missing the Ethernet Controller, Network Controller, and the PCI Controller drivers. I have searched all around, and I can not talk to Acer, for my warranty is past. They just want to repair it.
View 5 Replies
View Related
Nov 25, 2011
I just formatted my hard drive and installed Windows XP from scratch. I have a Dimension E310. When I looked at the Device driver menu I saw that I didn't have an Ethernet Driver installed. I have looked all over Dells site for the correct one but, can't seem to find it on the list for my Service Tag model. Possibly I don't recognize the drivers terminology as far as the list is concerned?
I have the original Dell Resource instalation disks with various drivers on them but, I can't seem to work out how to use them.
View 1 Replies
View Related
Apr 22, 2012
Needing to bridge from my wic interface to an ethernet interface on a 2900 series router so that I can pass through the ip address given to the WIC, to my ASA so that I don't have to give my ASA a private range address. (Just like a service provider might do when bringing a T1 with managed router in to my prem)
View 1 Replies
View Related
Jun 3, 2012
I just loaded the web interface IOS on a C3750X. The first thing I noticed was there was basically no web interface. I can look at things, and do default configurations on ports, but it doesn't appear I can configure VLANs or QoS or anything like that.
Am I missing something, or is this just how the web interface functions?
View 1 Replies
View Related
Jul 6, 2012
So my grandpas Dell insperon 6000 crashed and now he cant connect threw a wired connection but he can connect threw a wireless it says the drivers missing i tryed to just reinstall but windows couldnt find it and now idk how to get it to install and also the video controller and vga whatever them are also are missing im not worried about them but i would like the wired connection to work
View 1 Replies
View Related
Sep 2, 2012
Whenever I plug in an ethernet cord into the integrated ethernet port in my laptop, I do not get a connection and the "Local Area Connection" icon doesn't show up in the Network and Sharing Center or the Device Manager. When I do plug it in, the "Local Area Connection" icon shows up for a second saying it's unplugged and disappears. I have tried different ethernet cables as well as an ethernet adapter (which does show up in the Network and Sharing Center, but I still don't get a connection).
My laptop is a Dell Inspiron N2010, I'm running Windows 7 Home Premium 64bit, and my ethernet port "RealTek PCIe GBE Family Controller".
View 5 Replies
View Related
Feb 25, 2011
I have cisco 1721 router so I installed an ethernet interface card so when I make show run I found that there is a fast ethernet 0 and ethernet 0 (which I installed) so i wand to make subinfaces of the etheernet 0 but I can't. I tried to make encapsulation dot.1q but it doesn't accept it.
Is Ethernet0 supported to generate subinterfaces?
View 3 Replies
View Related
Nov 28, 2012
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120213 Rel.30335
ISP : ETAPA
I am writing in from Cuenca, Ecuador. I have a TD-W8901G Wireless ADSL2+ Modem Router. I have accessed the interface using the default ip address:192.168.1.1.When I select Interface Setup from the menu, it only shows Internet and LAN as the only 2 options. Wireless is no longer there. It just disappeared! The LED indicator light for WLAN is also "OFF." When you try the Quick Start wizard guide, it cannot complete the setup because there is an IP address error.
I have changed the firmware 2x since, trying to remedy this, I have also tried factory resets at least 3x. Nothing has worked up to this point.
View 1 Replies
View Related
Apr 9, 2013
I keep getting disconnected from the game "Vindictus". I'm not sure what protocols it uses, but it shouldn't require any configuration on the Router, since it was working fine before. I upgraded the firmware to 4.13 in an attempt to fix the issue, but it didn't work. Some people have suggested "Endpoint filtering" to be set to independent, but I cannot find such an option. Where is the option? I was told it was on the Firewall page, but it is not there (Advanced->Firewall/DMZ). The router is supplied by Virgin Media (ISP) but I'm not sure if that matters.
View 6 Replies
View Related
Jun 12, 2010
I have recently acquired a Dell Dimension 8100, and installed Windows 7 on it.
The Ethernet Controller in Device Manager is flaged (/!) not allowing me to use the internet.
I need a driver for it thats compatible with the onborad controller and Windows 7
View 16 Replies
View Related
Jan 2, 2011
I have a new PC with the Windows XP 64-bit OS. When I attempt to connect it to my home network, it doesn't see the network, and other computers can't see it. The network card driver is a 1394 Net Adapter. The driver appears to be working correctly, but it's not getting packets in or out. The setup seems to be missing the required Q0S Packet Adapter, but Windows won't let me install it.
View 8 Replies
View Related
Dec 19, 2010
We want to terminate new 10M link via Ethernet interface on Cisco 1841 router. We have free Gig port on the router. We also have HWIC-FE module inserted in the router. However, our implementation team said that Cisco 1841 doesn't support 10M link. It is not designed to cater to such high Bandwidth.
View 14 Replies
View Related
Feb 12, 2012
I have a Cisco 4402-25 WLC with the below information that is having an interesting issue. When you log into the GUI interface with the local account and click on WIRELESS, then choose a accesspoint it brings up a menu where you have three buttons below for the following options (Hardware Reset - Reset AP Now), (Set to Factory Defaults - Clear All Config), and (Set to Factory Defaults - Clear Config Except Static IP). The problem I am having is we access all of our WLC's using Radius and when you enter your AD username and password and go to bounce a access point the GUI interface is missing the buttons, they however appear fine when logged in with the local account.
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
RTOS Version..................................... 7.0.220.0
Bootloader Version............................... 4.0.206.0
Emergency Image Version.......................... 5.2.157.0
View 2 Replies
View Related
Apr 1, 2012
I've finally made the jump into Ubuntu and put it on my laptop. I have never used Linux before so it will be a bit of a learning curve although it does look quite user friendly.
I have already connected my Ubuntu laptop to my wireless router so I have internet. I would just like to be able to access files on my PC and vice versa similar to Windows Homegroup but I have no idea how.
PC = Windows 7 Ultimate - Laptop = Latest version of Ubuntu (I think it's 11?)
View 8 Replies
View Related
Oct 31, 2011
if i want to connect d-link router to system it asking for password i enter admin /password it is not accepting
View 1 Replies
View Related
Mar 10, 2011
I just installed ubuntu 10.10 and I'm unable to connect to the internet. I checked for device recognition and the output is DISABLED which apparently means that my network device may be turned off. How can I turn it on. Windows is no longer installed. By the way I'm an ubuntu newbie. Hence, I wiped my hard drive during installation.
View 1 Replies
View Related
Jan 21, 2011
I have installed Ubuntu on my HP laptop within Vista, because I am using the wireless adopter TP-LINK TL-WN721N to connect, I am not able to find the correct driver and install it.
View 1 Replies
View Related
Apr 12, 2011
We are having a network of 7 computers and a server (Ubuntu server). The problem is, two of them are not connecting to the network. When i check the network card of these two systems, it seems working (the green light is blinking). When i replace these systems with a laptop, it connecting to the network and there is not problem at all.
View 4 Replies
View Related
Jun 13, 2011
I have a Sony Viao PCG-71312L laptop that has Windows 7, 64-bit as OS. I loaded on Ubuntu as want to learn more about Linux. The wireless locator finds the signal but won't connect.It says "ethos" and then when you click from there I don't get through. Just seems to keep looking forever, then says after 3 minutes can't connect.It could be I need a specific driver for the Ethernos wireless device, I am not sure. Further I am had a hacking where I had to change wireless settings so I may have done it myself. I am able to connect on my Windows 7 wireless network account but not the Linux one. I tried deleting the account on the Linux Ubuntu that shows up but this didn't work.May have made worse.Is this on my wireless device side, meaning I need to change/get password ect or the Ubuntu side where it's some type of common problem. Do I need to access through the router web page? Incidentally that's blocked for me too.
View 2 Replies
View Related
Apr 23, 2011
I have 2 PCs, an Acer H340 and a network printer wired to the WAG320N; two other PCs are connected wireless. On every PC I have Windows 7 and Ubuntu (except the NAS with WHS).When I boot with Ubuntu on every PC, I can print, I can connect to intenet, open the Web interface of the WAG320N at 192.168.1.1 but I CAN'T see the NAS and the other PCs: this with the wired PCs and the WiFi connected ones. A Galaxy Tab can browse the NAS content and the Web.I didn't had this problem with the modem router I had from the ADSL supplier and the Huawei D100 I used before.On the network map of the Cisco Network Magic the Linux PCs are showed connected to the WAG320N with a dotted line, when the W7 ones are connected with a solid line.
View 3 Replies
View Related
Feb 17, 2011
I have installed Ubuntu 10.10 on Virtual PC 2007 on my desktop Windows machine. The internet connection has failed.
View 2 Replies
View Related
