D-Link DIR-615 :: Game Keeps Disconnecting - Suggested Settings Missing From Web Interface
Apr 9, 2013
I keep getting disconnected from the game "Vindictus". I'm not sure what protocols it uses, but it shouldn't require any configuration on the Router, since it was working fine before. I upgraded the firmware to 4.13 in an attempt to fix the issue, but it didn't work. Some people have suggested "Endpoint filtering" to be set to independent, but I cannot find such an option. Where is the option? I was told it was on the Firewall page, but it is not there (Advanced->Firewall/DMZ). The router is supplied by Virgin Media (ISP) but I'm not sure if that matters.
View 6 Replies
ADVERTISEMENT
Feb 4, 2013
I have had a DIR-655 for years, and this is a treat - channeling everything from IPTV, to a fast fiber connection, transfers - no sweats.
Then I had to setup a router for a friend, and recommended the DIR-615.
Setup the router, and max it would connect with was 150mb - I changed the settings accordingly: auto channel scan channel width: auto 20/40mhz
So this "opened" up the 300mb speed - however only for 5 mins, then it falls down to 150mb.
My laptop (lenovo) connects to the dir-655 just fine at full speed, and this is also the machine I used for testing the dir-615.
It's ax Hx firmware, FW: 8.04
What I can conclude by using inssider, and xirrus wifi inspector is that it generates 2 channels - and then after 5mins of connectivity looses a channel, and then the speed drops.
I got a new router from the dealer, same issue. Then a friend of mine lent me an ancient dir-615, and interestingly enough this had the same configuration option of "Transmission rate" in the wireless settings page! Just like the dir-655. and also connects at 300mb...
View 5 Replies
View Related
Nov 28, 2012
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120213 Rel.30335
ISP : ETAPA
I am writing in from Cuenca, Ecuador. I have a TD-W8901G Wireless ADSL2+ Modem Router. I have accessed the interface using the default ip address:192.168.1.1.When I select Interface Setup from the menu, it only shows Internet and LAN as the only 2 options. Wireless is no longer there. It just disappeared! The LED indicator light for WLAN is also "OFF." When you try the Quick Start wizard guide, it cannot complete the setup because there is an IP address error.
I have changed the firmware 2x since, trying to remedy this, I have also tried factory resets at least 3x. Nothing has worked up to this point.
View 1 Replies
View Related
Apr 17, 2012
Today I got a new modem, which gave me internet on the computer. I still can't get online on my PS3 or IPOD. How to create a new wireless connection. Also the World icon on the router is red but everything else is green.
View 5 Replies
View Related
May 13, 2011
i cant connect to most of my friends through xbox and computer, i also cant connect to some games servers. it also says that i have a nat strict. i don't care if my router has no security. i just want my internet to be fast and i can connect to people.
View 1 Replies
View Related
Jan 22, 2011
i have a DIR-601. Basic settings, port forwarded for Xbox live and Wolfenstein enemy territory.I have a home PC with a wired connection and a laptop which is set up through wireless. I installed the game Wolfenstein: Enemy Territory on my laptop and every time I start the game and attempt to fetch a server list, my router resets itself. The game works fine when I connect directly to my modem, but not when I connect to my router
View 1 Replies
View Related
Oct 24, 2011
I am new to these forums and I have upgraded from firmware 1.00 on the DIR-815 to the 1.01 firmware and once I upgraded, I can log into Xbox, but can't host party chats or host game rooms. I also noticed that any and all messages sent from friends didnt show until I rebooted my console. Something is SERIOUSLY WRONG here and would like a MOD to comment on this.
View 12 Replies
View Related
May 1, 2011
I have a dlink cable modem and dlink dir-655 router. When the router is first turned on or a setting is changed any/all of the computers here can connect to the Ultima Online game server for login but within a few minutes most will not be able to. Its as if they are being refused a connection to login.owo.com (I think that is where they connect to). 1 maybe 2 computers can still connect but its fickle and can't know which 1 or 2 it will be or for how long.any computers already connected to a game server are fine its just the ones trying to login after the router has been running for a few minutes. My first assumption 2 days ago when this happened with my dlink gaming router was that the router developed a problem but now with a new router its still happening. The problem started when I re-enabled the wireless on my gaming router and when I noticed the problem I re-disabled the wireless but the problem persists. A new modem (the DIR-655) did not work...
View 10 Replies
View Related
Mar 8, 2011
I have (2) WLC-4404's with one in standby. I noticed this controller has been up for 300+ days and i was just wondering if it will be useful to reboot these once in a while? Any benefits or should i just leave them running?
View 4 Replies
View Related
Jun 3, 2012
I just loaded the web interface IOS on a C3750X. The first thing I noticed was there was basically no web interface. I can look at things, and do default configurations on ports, but it doesn't appear I can configure VLANs or QoS or anything like that.
Am I missing something, or is this just how the web interface functions?
View 1 Replies
View Related
Feb 12, 2012
I have a Cisco 4402-25 WLC with the below information that is having an interesting issue. When you log into the GUI interface with the local account and click on WIRELESS, then choose a accesspoint it brings up a menu where you have three buttons below for the following options (Hardware Reset - Reset AP Now), (Set to Factory Defaults - Clear All Config), and (Set to Factory Defaults - Clear Config Except Static IP). The problem I am having is we access all of our WLC's using Radius and when you enter your AD username and password and go to bounce a access point the GUI interface is missing the buttons, they however appear fine when logged in with the local account.
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
RTOS Version..................................... 7.0.220.0
Bootloader Version............................... 4.0.206.0
Emergency Image Version.......................... 5.2.157.0
View 2 Replies
View Related
Aug 26, 2011
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router.
I'm able to connect to the Internet using this same cable using a Windows machine, way Linux is configured. [code] It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
View 4 Replies
View Related
Mar 25, 2013
Is there any suggested upper limit to a single EIGRP hub-and-spoke design (i.e. with a single central router)?Router is a 2900 ISR,I'm vaguely aware of a similar design limitation with OSPF areas where no single area should contain more than 40 - 80 routers.
View 8 Replies
View Related
May 6, 2012
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router. I'm able to connect to the Internet using this same cable using a Windows machine, so there's something wrong with the way Linux is configured.
Here are my network settings on Linux:
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[code]....
It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
View 3 Replies
View Related
Mar 3, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
View 1 Replies
View Related
Feb 6, 2012
I have attached setup like this :- This is the same scenarios as ASA with Dual WAN setup. But my requirement is different. I have added in ASA and configure sla is asa, all working fine. When one link goes down traffic pass through backup route. my sal config is below:-
sla monitor 100 type echo protocol ipIcmpEcho 10.5.5.120 interface Link1
num-packets 3 frequency 10
sla monitor schedule 100 life forever start-time now
show runn routes are :-
route Link1 10.5.5.0 255.255.255.0 10.4.4.5 1 track 10
route Link2 10.5.5.0 255.255.255.0 10.6.6.5 254
Is there any way that i can implement track on 2nd link to destination? because may be after Link1 failure when backup route was it would be able pass traffic to destination, may be link failure between Link router and Destination. Can i monitor backup link if that is active and traffic can pass to destination when 1st Link1 will fail.
View 1 Replies
View Related
Jan 27, 2013
we have connected gig interface Ethernet on Cisco 2900 series router to mpls link connected to our corporate network ,the issue here is our router interface speed and duplex settings are set to auto negotiation.The interface is negotiating speed and duplex at 10 and half where the provider side interface is hard coded to 100 and full duplex.when we tried to hard code the settings on our router to match the provider the interface never come up.
View 4 Replies
View Related
Jun 10, 2012
I'm based in the UK and am using a DIR-655 router but I have no record of its serial number (there is no sticker on the item, and the original box is now missing) - is there any way I can ascertain which version of the router I have? As I understand matters, I need to know this so that I can apply the correct firmware upgrade, which is what I wish to do.
View 1 Replies
View Related
Sep 7, 2012
About 2 weeks ago my router began acting up. It disconnects when I'm just browsing, downloading or streaming a video. I tried everything! I changed the channel on the router, resetted the router numerous times. I connected the ethernet cable from my pc directly to the modem to see if it was in fact my router and not the modem. My pc never disconnected once while connected to the modem. In order for me to download something or stream a video I have to connect my pc to the modem and it is becoming a pain!
View 5 Replies
View Related
Feb 13, 2013
I have installed a DIR-655 and it all works at home, my brother accesses my slingbox to get his fix of english tv. This has all worked no problem in the past with the old box (Technicolor TG582n). However it now only connects for approx 5 mins and then it loses the connection. Replacing the old box all is well so it has to be something on the router. I have changed various settings inc changing the MTU size, pointing the gateway to the external gateway address, upgrading the firmware (now on Hardware Version B1, Firmware Version 2.05).
View 3 Replies
View Related
Jun 4, 2011
I bought a Dlink Dir 655 router a couple weeks and i seem to having a trouble. Every between 30min to a couple hours the connection dropps for no apparent reason. I tried a couple things like resetting to factory config, giving myself a static adress (since the logg was spamming the dhcp over my PC) Unfortuantly, none seem to work. so far it does a great job but the connection dropps are really annoying. Here are the log files if when it last occured.
May 31 23:38:22 using nameserver 195.130.131.1#53
May 31 23:38:22 using nameserver 195.130.130.129#53
May 31 23:38:22 reading /etc/resolv.conf
May 31 23:38:21 Lease of 94.225.102.94 obtained, lease time 7200
May 31 23:35:09 [84747.720000] module arch cleanup sch_ubicom_streamengine: OCM instruction memory free of 0 @00000000
May 31 23:34:15 [84694.340000] module arch cleanup nf_conntrack_ftp: OCM instruction memory free of 0 @00000000
May 31 23:34:15 [84694.170000] module arch cleanup nf_nat_ftp: OCM instruction memory free of 0 @00000000
View 1 Replies
View Related
Apr 8, 2012
My router was working fine. Then 1 day I started having slow internet. My ping in games would jump up from ~60 to about 400-800. Did some troubleshooting with my ISP. Seemed like my modem was to blame. So I bought a Netgear one from BestBuy.
Everything was fine. Then 1 day the internet stated disconnecting. None of the computers could see the router in the wireless networks. I found the only way to solve the problem is to unplug the power and plug it back in. Strangely it seems to happen a lot late at night like around 11PM or 12 midnight EST.
Before with my old modem I just had automatic settings and DHCP. With the new modem it wouldn't work so I called DLink and the tech guy walked me through some steps, one of which was changing the ip address from 192.256.0.1 to 10.10.10.1. Whenever I reboot the router after a disconnect the computers say "there was an IP address conflict." Maybe this has something to do with it?
I saw in another topic someone said their router's time was wrong. Mine said it was 2010 so I updated it to automatically sync with ntp1.dlink.com and now it shows 2012. Let's see if it fixes now. My mom's laptop had a similar problem with Skype. For some reason the clock kept resetting to 2000 and Skype would not work (everything else did). When she resets the time to 2012 it starts working again.
View 1 Replies
View Related
Jan 15, 2013
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : AT&T
Everything seems to work fine except that there is no Wireless option in the menu. I updated the firmware and reset to factory defaults, but the wireless option still does not appear in the menu.
View 1 Replies
View Related
Apr 9, 2013
I've been trying to connect two DCS-942L to some netgear WNHD3004 (wireless access points a/n WPA2 personal) that I use as access point but I can't find them in the site survey (advanced settings then wireless setup in the camera page).I think I could set manually the network name, security mode and key but since I'm working remotly on these camera, I'm pretty sure it won't work and I'll loose connection (actually they are connected to other access points and work ok).An ipad and macbook pro is able to see and connect to these access points so I don't think they are the problem.I've updated the camera to the latest firmware (1.12 build 1608 agent version : 2.0.15-b11)
View 2 Replies
View Related
Aug 6, 2011
It's a D-Link Wireless N 150.I constantly get an "Excellent" signal from the router, but my HP Mini netbook keeps disconnecting and re-connecting. It happens three to ten times in each hour, and it re-connects quickly, but the hiccup is annoying. Once in a blue moon, it'll disconnect and refuse to re-connect for a while.Other items that use the router--our iPhones, our Nintendo 3DS's, our Wii, our Xbox--don't have an issue.My netbook doesn't have a problem if I use wireless somewhere else, like in a coffee shop or McDonalds or wherever.I've tried updating my drivers, without much luck.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsNadia>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Caillou
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[code]...
View 9 Replies
View Related
Aug 12, 2011
Sometimes when I leave my D-Link DSL-2680 router on for a long time it keeps disconnecting and the internet and DSL light turn red or they are blank. sometimes happens randomly as well. My ISP is TalkTalk but their customer service is crap and they're too slow to respond.
View 12 Replies
View Related
Apr 29, 2011
I log in to work from home and if I am inactive for 5-10 minutes, I lose connection to my work server. If I bypass the router, this problem doesn't happen. How I can change settings to keep my session alive?
View 15 Replies
View Related
Jan 9, 2011
For the past few months my router has been randomly disconnecting me and everyone who is connected to the router from the internet from anywhere between 10 seconds and 1 min and i can't seem to figure out what has been causing this. It can happen multiple times a day or it can go for a week without happening. it makes playing online games extremely annoying.
Hardware Version: A4
Firmware Version: 1.32NA
View 3 Replies
View Related
Aug 11, 2011
DIR-655 D-link router
My internet connection with 3 computer was gong strong for three years until this week. About every twenty minutes, the connection drops for someone and reconnects in 20 seconds.
I am getting this message in the browser.
View 5 Replies
View Related
May 24, 2011
I am pretty new to networking and I have been working on things for over a week and have made some progress which has lead me here. My basic problem is that my network (media shares) is disconnecting from WDTVLIVE while steaming shows through playon. However, I can stream 1080p movies that are stored on my PC all day with no problems. Even when the media shares disconnect, network shares (stuff stores on my PC_) are still available and stream fine.
View 8 Replies
View Related
Mar 19, 2011
I get this at random times. My internet disconnects until I reset my modem and I don't think it has anything to do with the modem because I had it replaced by my ISP and they did a few line tests and nothing was wrong. What can I do to avoid having this problem anymore? It's been doing it for almost 2 weeks now and when it decides to do it is random.
View 1 Replies
View Related
Jun 23, 2012
I'm no good with computers, or anything like that; but this since about two days ago, my internet has been cutting in and out. One minute it will work fine, then a few minutes later it will disconnect, and then reconnect a few minutes later.I noticed that the globe symbol on my router either flashes when this occurs, or the power button turns orange. Why this is happening, and why it is happening all of a sudden ?
View 6 Replies
View Related
Aug 30, 2012
Is it possible to de-auth a client, and then make sure they have to enter the passphrase if they want to connect again?
I just cant seem to find this option anywhere in my routers configuration page.
View 1 Replies
View Related
