Router Is On But Wireless Network Is Not Showing Up?

Oct 21, 2011

Some background first. Last night I went trolling around for a solution to an ip address conflict message I receive when I try to go onto Xbox live via a network bridge on my laptop. What I eventually ended up doing was going into my tp-link wireless router settings (not sure of the exact model number as I am not home right now) and reserving two different ip addresses for my laptop and my Xbox using their MAC addresses. It didn't appear to do anything ( now I think possibly because my Xbox needs the same ip as my laptop?). Anyways I tried to go onto Xbox live and it worked at the start (as it always does) and then 30 minutes in, the ip address conflict message came up (usually meaning a disconnect from Xbox live is imminent). But I actually ended up staying online for another 3 hours until the Internet crashed.

Upon further investigation I noticed that my wireless network was not even showing up on my computer, my phone, or any of my roommates computers. I went upstairs to check the wireless router and it was seemingly working correctly (i.e. no flashing lights or anything). Not quite sure what to do. I would go back and change the router settings but I don't think I can without a connection to it.

View 3 Replies


ADVERTISEMENT

Vista Showing Normal Wireless SSID Plus Showing Second Unidentified Network

Feb 5, 2011

my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.

View 13 Replies View Related

Linksys Wireless Router :: Secure Network With WRT54g2 V1 Not Showing Up

May 15, 2012

Had a secure network with my model wrt54g2 v1 router, then suddenly it's not showing up.  All I have is a unsecured Linksys way on to the Internet.  How can I get this back to my secure network? 

View 7 Replies View Related

Linksys Wireless Router :: EA3500 Guest Network Not Showing Up As Available On Device

Sep 26, 2012

Experienced problems with guest network not showing up as an available network on a device (laptop, iPad, etc)?I double checked if guest network is enabled on a EA3500 router. What other steps can I take?

View 5 Replies View Related

Linksys Wireless Router :: E1000 Is Showing Different Named Wifi Network?

Jun 29, 2012

I have a strange problem with my Linksys E1000. When I try to connect wireless, there is a network with an excellent signal, but it has the name "CiscoI1593" and it asks for a password which I don't know. My original network does not appear for some reason when I try to connect wirelessly. I do see my original network name when I use an ethernet cable through the E1000.
 
It's not possible, where I live, for this "CiscoI1593" network to belong to someone else, it just seemed like it renamed my network to this and also wants some different password. 
 
I think this may be due to something I did. My internet occasionally cuts out and it's usually something wrong with the modem or router, so I typically unplug and press the reset button on both until it begins to work again. This is the first time i've had this problem though, and I have unplugged and pressed the reset button on my router many times.
 
There is also a button in the middle of the front of the router that looks like a refresh symbol, but I don't really know what it is, pushing it doesn't seem to do anything but make a solidly-on light become blinky.

View 6 Replies View Related

Linksys Wrt160nv2 - Extra Router Showing Up Under Network Infrastructure

Jan 29, 2012

i was looking at my network settings today on my pc and noticed a router (linksys wrt160nv2) that wasn't mine. i can right click on it and see its mac address but when i double click it asks me for a pin number. the device shows up with both a wired and wireless connection. i'm using windows 7 64-bit.

View 3 Replies View Related

Linksys BEFW11S4 Router Showing Network Key Doesn't Match

Mar 24, 2011

My linksysBEFW11S4 router shows a NetWork Key of let's say "mister", when I try to connect a new laptop using this key it comes up with Invalid Key.

View 2 Replies View Related

Wireless Network Indicator Showing No Connection?

Jan 31, 2012

My wireless netwok indicator on the bottom of my screen show no connection. It says I need the WEP key.

View 1 Replies View Related

Connect To Network Vista Wireless Not Showing

Jan 6, 2013

I have vista installed in my HP m/c.Earlier the 'connect to Networ' list was showing my WIFI nw but suddenly it doesn't show now n the list while other wifi n/ws are still shown in the vicinity.I tied to setip the wireless n/w using 'HP Wireless Assstant' wizard but while I select the routr as Dlonk th mdel shown in the list doesn't show Dir-300 so it gives the message as 'HP network assistant currently doesn't support te router you selected'. What can be done to get wifi in the list of availale networks.

View 1 Replies View Related

D-Link DIR-615 :: Wireless Network Not Showing Up Anymore

May 24, 2011

I've tried changing the settings on my DLink wireless router, resetting it and my cable modem (by unplugging them and plugging them in again), and even restoring my iPod, but I cannot find my home wireless network! Both my iPod and my PC can find other networks, but not my own.My network is WPA-2 only, which my iPod should be able to see. The cipher type is TKIP. My wireless channel is 2.437GHz (channel 6, I can't change it). I even tried resetting my network settings on my ipod, with no luck.My router is a DLink DIR 615 wireless router and my computer is a PC that runs Windows 7. The router is able to connect to the internet; it's just the wireless portion that isn't working.

View 11 Replies View Related

Wireless Network Not Showing On IBM Thinkpad Running Windows XP?

Aug 12, 2012

I've come across an older IBM ThinkPad 2687 via work that was just collecting dust, and it was able to connect to a wireless network.Due to other issues with the machine, I had to do a complete refresh on it, so it only had the XP OS.

I had to update the drivers to make sure other things like connecting to a flash drive, and connecting to a local area was possible, which is how I'm able to connect now.However, I've been unable to access the wireless connection within Network connections. I've downloaded the different drivers from the Lenovo IBM ThinkPad website, but still no luck.

View 7 Replies View Related

My Laptop Is Not Detecting / Showing Wireless Network Connection

Nov 21, 2012

I have a Toshiba Satellite A665 Model Laptop. Which i bought 2 years back. I got a new wireless Internet connection few days back. but I am unable to use that network in my laptop. I have Windows 7 Ultimate 64 bit OS in my system.

View 2 Replies View Related

Cisco Wireless :: 2504 - Network Computers Not Showing Up

Jun 16, 2013

Cisco 2504 wlc, 1142n ap, windows radius server.
 
When I click on Network, the only computer that shows up is mine. If I am hardwired then everything shows up (Servers, other workstations). Is this a problem with the radius server or something on the controller?

View 2 Replies View Related

Atheros AR5B97 Adapter - Wireless Network Not Showing On List

Nov 17, 2011

When I'm home I can get online but it's slow webstar. I used to be able to get online at the local McDonalds with free wi-fi, real fast. Now, the connection list doesn't show the "FREE McDonalds" connection.

I have: Atheros AR5B97 Wireless Network Adapter, Windows 7 on ACER Aspire 7741z-4815. It has been updating until recently, don't know if it's because I haven't been online as often or what.

View 1 Replies View Related

WMP600N - Wireless Network Adapter Not Showing Up In Device Manager For PC

Sep 13, 2012

I'm trying to install my WMP600N wireless adapter. It's not showing up in my device manager. The thing is I've installed it in the past and ran into some driver issue which made me give up. But it showed up in device manager before so I know it's not a dead card. Right now, plug and play isn't working. How do I get a Wireless Connection to show up in my device manager? This is for my PC. I also have a couple drivers I could use but I don't know how to install them because they are not exe files. I can't select upgrade drivers because the network adapter isn't showing up in the first place.

I have tried unplugging and replugging, and also scanning for hardware changes in device manager.

View 1 Replies View Related

Cisco Wireless :: 1142 AP Showing Maximum Of Only 54mbps In Network Info Dialogue Box

Mar 18, 2013

I have encountering a problem with a new installation at my clients side recently.We have a 5508 wlc and a bunch of Laps connected to it.Recently we associated a 1142ap to the same controller.The issue we are facing is that , the client laptops that are connected to THIS ap are showing maximum of only 54mbps in their network information dialogue box.Initially i couldn't understand why this could happen.But after a bit of research , i came to know that this could happen because of ``unticked`` data rates in the controller , or because of not using wpa2 with aes as the security standard for N-series access points.Now i have enabled all data rates in the High Throughput section as well as enabled the correct encryption standard.But still the issue persists.We have checked with multiple laptops , to rule out the possibility of a faulty n/w card

View 3 Replies View Related

Network Not Showing Up?

Aug 2, 2011

I can connect to internet only while wired. my wireless is no longer working. I have a network set up, named with my last name but it does not appear as a network i can connect to in the system tray. Instead there is the name of a network i did not establish (neighbors network??)I cannot connect to that without a security key whihc makes sense. I went into Manage Wireless Networks and mine islisted and marked as connect automatically.

View 1 Replies View Related

TP-Link 150Mbps Wireless :: Router WR642G Ver 3.6 Not Showing QOS

Jan 26, 2013

Region : Australia
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :

I am posting this in the wrong place but thats only because I cant find the forum for the TL-WR642G ver 3.6 device.Basically I am unable to see any QOS configuration and I wanted to know if this is available to this model ?I know the ver 4.0 firmware update states that QOS is added but can I update a 3.6 device using a ver 4.0 firmware ?

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Showing 2 Devices With Same IP

Sep 3, 2012

I'm using the EA4500 router with Cisco Cloud Connect.  I've noticed under Devices I'll see devices named "Network Device".  They have a generic MAC address with something like "00:00:00:00:2F".  They will have an IP that's already assigned to another device.

View 9 Replies View Related

Network Showing 100mbps?

Jun 21, 2011

i have gigabit cards on 3 pc linked by a gigabit router but all machine showing connection speed of only 100mbps

View 6 Replies View Related

No LAN Showing In Network Connections?

Aug 19, 2012

I have a desktop PC where the only internet connection is via a 'USB mobilebroadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN (not connected to internet) and dongle (connected to internet) connections.My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless NetworkAdapter" and "Realtek PCIe FE Family Controller" are both showing without any ?

Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.

View 6 Replies View Related

Wifi Network Not Showing Up?

Mar 4, 2012

Couple of weeks ago, I bought a net gear n600 dual band router. It's worked perfectly until last night. The network won't show up on any wireless devices in the house. I have restarted and reset it and my modem which is a westell. Sometimes the computer plugged in to the Internet with the Ethernet cord can connect and sometimes it cannot. What is the next step to figuring this out

View 1 Replies View Related

Network Is Showing Up As Encrypted?

Sep 23, 2011

I reloaded XP on an old laptop I have, a Toshiba Satellite, and it works fine. Problem is when I try to connect to my wireless network, it comes up as being security protected...and it isn't...and never has been. I have other computers connecting just fine, but I can't seem to figure this one out. I don't have a key to enter as there isn't one! I installed a USB wireless adapter, and it works fine, but I don't want to use the adapter on the laptop.

View 6 Replies View Related

Linksys Wireless Router :: E4200 - DHCP Reservation Not Showing Anything

Jun 9, 2011

When I'm in Setup -> Basic Setup -> click on DHCP Reservation, I don't see all entries I've created earlier but computers that connect still have the correct IP address on the network; I don't know if I can create additional entries if nothing appears
 
When I go to Status -> Local Network -> DHCP Client Table the list is blank but some computers are connected to the networkI'm using firmware 1.0.01 build 10  Feb 21, 2011, language = English, Firefox 4.0.1.Rebooting the router doesn't change anything, I can't see connected LAN equipment and DHCP Reservation is empty despite the fact I've created entries.Together with the "Access Restriction" which doesn't allow to block a computer from 10pm => 8am unless you create 2 rules + various issues with attached USB + 2.4Ghz signal that is far from optimal (never able to achieve more than 144-N-Mbps) and I ask myself if I will not contact the store where I purchased this unit and ask a refund (and buy something else from another brand...)

View 9 Replies View Related

Linksys Wireless Router :: EA4500 Not Showing Up In Device List?

Nov 27, 2012

I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however..
 
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
 
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.

View 7 Replies View Related

Linksys Wireless Router :: E4200 Storage Not Showing New Videos?

Mar 13, 2012

My router usb storege was working fine with my old videos and streaming fine too but now im putting some new videos on the usb storage my router its not showing the new videos on the usb storage.

View 2 Replies View Related

Linksys Wireless Router :: Cisco EA4500 Showing Up In Finder

Oct 30, 2012

Never seen that before so why is it there and is there a way to get rid of it showing..... tried a couple of "apple" forums with no luck.

View 4 Replies View Related

Linksys Wireless Router :: Why WRT54g Only Showing 1st LED Port In List

Dec 18, 2012

Why is my WRT54g router only showing the 1st LED port is lit, and not the rest when I have changed or added a device to the 2nd,3rd,4th port? It is also stopping my ability to stream,view youtube etc. When I disconnect the router from my cable provided modem, everything works fine?

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Showing As WRT54GL In Setup

Dec 4, 2011

I have a Linksys Router that shows WRT54G Ver 3 on its base, but when I go in the settings I realized it says WRT54GL over there.

View 1 Replies View Related

Linksys Wireless Router :: Wrt120n Showing Access Restriction Tab?

Oct 29, 2011

All the documentation for this router shows the Access Restriction tab in the router configuration menu.   It's the same as other linksys routers.  The current version of the firmware doesn't have this functionality.  Was it removed?  

View 5 Replies View Related

Linksys Wireless Router ::WRT54GS2 - Ports Are Not Showing Activity

Mar 23, 2012

I have a Linksys model WRT54GS2 with 4 ports, with Ethernet cables connected to ports 1 and 2.  I have a laptop connected by wireless connection, with only an Xbox connected using Port 1 and occasionally port 2.  Just recently, port 1 shows no activity.  When connected to Xbox it doesn't display a check mark showing connection but does with port 2.  I've connected it to port 3 and 4, which shows a check mark but won't connect to Xbox live.  It's like port 2 only works, what I can do to "fix" ports 1, 3, and 4?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wi-Fi - Only Showing Speed Of 65Mbps

Oct 19, 2011

Just got my E4200, setup and working with my laptop, But its only showing a speed of 65Mbps, How to get it up to the advertised 300Mbps?

View 6 Replies View Related

Network Is Not Showing Up On Only Two Windows 7 Computers?

Dec 6, 2012

My Macbook Pro connects and mom's Windows 7 laptop connects, and (though having done it manually) and my iPhone connects as well. But my Windows 7 desktop and my dad's Windows 7 laptop don't detect the network.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved