Network Adapter Showing Up As Ethernet Controller?
Oct 25, 2012
my new build i installed a TP-link 300mbps wireless card, it will only however be recognised as ethernet controller and not the normal network adapter. So i put an old wireless card from another PC into mine and it works without a hitch comes up with network adapter in device manager and installs fine, and the problem card was put into an older PC and worked fine just like expected. Im really unsure on what could cause this and im not to sure about buying another card just get incase
my system info is(not sure if it matters)
ASUS M5A99X evo R2
Phenom 965 BE
8GB kingston Hyper X 1600mhz ram
OCZ 650W bronze edition
Radeon 7770 OC
View 4 Replies
ADVERTISEMENT
Nov 26, 2012
I am showing a yellow question mark on my Ethernet controller.
View 1 Replies
View Related
Mar 13, 2013
I am having vastro 460 with intel i3 and window 7 32 bit . try to install driver for network card but not working. ping is working but not showing it in device manger.
View 5 Replies
View Related
Feb 12, 2011
have had a new HP G62-234DX laptop for about 4 months now and I'm now having problems connecting to the internet via ethernet. The lights do not come up when I plug it into the port and I have already tried to download the Ethernet driver from HP but it didn't seem to install properly, tells me it only works for Windows Vista which isn't true. I checked my device manager also and saw that I only have my wireless network adapter showing which works fine because I've been connecting wireless but I need a wired connection when I do not have wifi at my university. On device manager I chose 'show hidden devices' and I saw an unnecessary amount of "Microsoft 6to4 adapters" come up which does not seem right.
View 2 Replies
View Related
Jul 21, 2012
I have a HP G62 laptop with windows 7 and a Atheros AR9285 wifi adapter. The Wireless Assistant shows the WLAN as disabled. In the device manager, the adapter is listed as enabled. When I push the F12 key that turns on and off the wireless, the wireless assistant alternates between showing the WLAN as Off or Disabled. I tried disabling the adapter and re-enabling it from the device manager, but the wireless assistant still shows it as disabled.
View 3 Replies
View Related
Mar 5, 2012
No network adapter showing in device manager
View 2 Replies
View Related
Dec 5, 2012
My attempts to connect me and my girlfriend's laptops together for some LAN gaming with an ethernet cable has had some odd problems, with my LAN connection showing up as an Unidentified, Public Network which I cannot edit in any way whatsoever. I'm at a loss. I've tried setting a static IP and it didn't appear to work at all.The network bridge is to use my laptop as a wireless adaptor for my Xbox.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersCorey>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Corey-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 5 Replies
View Related
Nov 17, 2011
When I'm home I can get online but it's slow webstar. I used to be able to get online at the local McDonalds with free wi-fi, real fast. Now, the connection list doesn't show the "FREE McDonalds" connection.
I have: Atheros AR5B97 Wireless Network Adapter, Windows 7 on ACER Aspire 7741z-4815. It has been updating until recently, don't know if it's because I haven't been online as often or what.
View 1 Replies
View Related
Sep 13, 2012
I'm trying to install my WMP600N wireless adapter. It's not showing up in my device manager. The thing is I've installed it in the past and ran into some driver issue which made me give up. But it showed up in device manager before so I know it's not a dead card. Right now, plug and play isn't working. How do I get a Wireless Connection to show up in my device manager? This is for my PC. I also have a couple drivers I could use but I don't know how to install them because they are not exe files. I can't select upgrade drivers because the network adapter isn't showing up in the first place.
I have tried unplugging and replugging, and also scanning for hardware changes in device manager.
View 1 Replies
View Related
Feb 4, 2011
My Ethernet is not showing up in device manager or Network Connections. I've checked the bios and it is enabled. I've also tried to install the drivers, but at the end of the install this error message pops up " the Realtek Network Controller was not found. If Deep sleep mode is enabled please plug the cable"
View 1 Replies
View Related
Jan 5, 2013
I have an acer M5641 desktop and i do not have a network adapter , i reinatall windows 7 basic premium and no success
View 1 Replies
View Related
Mar 15, 2012
We can not get on line with our home computer (dial-up). The computer dials out, the modem at our ISP picks up and then hangs up - Error 720.[code] The last two were installed by Avira Antivirus, a program which we have uninstalled.Can I download support files for a network adapter? Windows XP SP3
View 3 Replies
View Related
Oct 31, 2011
I just reinstalled windows 7 on my Intel i3 M380 laptop, and now I cannot connect to the internet wirelessly and I can't connect with a ethernet cable. In device manager, it says those devices aren't installed. I can't install them because the laptop has no internet. I can't seem to find the drivers for them either on intel. Seems like the reinstallation deleted my network adapter.. I can't find the correct link on intel.. I've tried like 3-4 on my laptop and none of them seem to work..
View 1 Replies
View Related
Dec 27, 2012
My hard-drive crashed, and I bought it refurbished, so I never got a Windows disc. I got a hard-drive from a friend, and I am trying to use it with my laptop, but it is missing the Ethernet Controller, Network Controller, and the PCI Controller drivers. I have searched all around, and I can not talk to Acer, for my warranty is past. They just want to repair it.
View 5 Replies
View Related
Jan 17, 2013
i need Ethernet and network controller drivers for gigabyte Q1500M
View 1 Replies
View Related
Aug 22, 2011
I cannot get network and ethernet controller drivers for HP6120 pavilion.
View 2 Replies
View Related
May 21, 2012
Where do i go to get driver for a network and ethernet controller for toshiba satellite c655d-s5200
View 1 Replies
View Related
Dec 22, 2011
i have a Dell Latitude E6400. Just reinstalled Vista Ultimate. But it say, "Update Driver Software-Ethernet Controller and Update Driver Software-Network Controller. What I need to install from Dell website?
View 1 Replies
View Related
Aug 25, 2012
I could not boot the other day so I spent a few hour pulling everything out and checking memory components,etc.m taking the battery out finally fixed the boot issue but now there is no Internet or network detected or network adapter. It is not the router because pc in the other room is working fine on same connection. Mseems like a CMOS or bios issue. There was a message before boot about reverting to default bios settings. I can't update or remove driver because it is not detected and no Internet.
View 10 Replies
View Related
Mar 19, 2011
I'm looking for Ethernet Controller and Network Controller for Toshiba Satellite L655D-S5164 running on Windows 7 32bit and 64bit on two different laptops.Also, i tried to downgrade to Windows XP and every time the cd boots it gives me blue screen of death.
View 1 Replies
View Related
May 10, 2012
I recently sent in my Inspiron M5040 laptop in to get repaired because it got severely water damaged and when i got it back i culdnt connect to the internet wirelessly so i tried pluggin in my ethernet cable an that wouldnt work either so i played around with my computer a little bit and saw that my ethernet and network controller drivers weren properly installed. How do i get those two drivers with no internet connect? Is there any way i can get a disk mailed to me with all of the up to date drivers i ned or do i need to ship my laptop back in to dell?
View 1 Replies
View Related
Nov 17, 2012
So usually I'm using my Windows 7 + USB Modem with ICS enabled to give my xbox 360 internet access and it's working fine. But after upgrading it to Windows 8, my Local Area Connection now becomes Unidentified Network so I can't give my Xbox internet connection again. In diagnose the problem it says that "Local Area Connection" doesn't have a valid IP Configuration.
View 1 Replies
View Related
Oct 14, 2011
I am working with windows xp Connected wired(ethernet) Now i am struggling with network connection problem when i checked in Control Panel-->Network Connection options i found that there is no LAN icon displayed And the "NETWORK ADAPTER ICON" is missing in Device manager.what should i do to connect to internet and to get the network adapter icon
View 1 Replies
View Related
May 9, 2011
Is it possible to use a USB to Ethernet adapter to attach a USB printer to the network?
View 3 Replies
View Related
Feb 6, 2011
I am trying to connect a sony blu-ray player to the internet using a powerline adapter but the BR player does not connect. I currently have two Satellite DVR receivers using the same powerlines and they work fine, but the Sony player does not connect to the network. I have to try a wired connection because my wireless signal to the player has trouble with netflix and other download services. Connection gets lost.
View 5 Replies
View Related
Jul 18, 2012
I got a Acer Laptop from my buddy that had windows 7 and when he had it his harddrive had crashed so he put in a older harddrive in it and installed windows Vista. Doing that caused the ethernet and network adapter to not work at all (says it need drivers) and I can't access the internet at all on it. I don't know if I can grab the drivers somewhere else or if I have to just count my losses.
View 11 Replies
View Related
Feb 29, 2012
I have several APs directly connected to a Cisco 3560 and each port is configured this way....
interface FastEthernet0/1
description Uplink To Access Point
switchport trunk encapsulation dot1q
[Code].....
The switch shows the AP under sho cdp niegh but when I go to the controller and look at AP neigh nothing shows up. I am currently running a WLC 4404 with 4.2.209 ( yes the upgrade happens tomorrow ).
why the switch shows the neigh. but not the AP when looking from the controller?
View 4 Replies
View Related
Feb 5, 2011
my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies
View Related
Jan 7, 2011
Why don't I see my wired LAN Adapter in device manager? I have an Ethernet port on my laptop, but I don't seem to have the adapter.
View 3 Replies
View Related
Mar 6, 2012
I recently installed additional licenses on my 2 WLC 5508s. Then I installed NCS on a virtual appliance. Installed the NCS license, added the controllers, refreshed configs, created templates, etc. However, when I go to look at the License Center, I can't see any controller licenses. When I log directly on to the controllers themselves, the licenses say they are installed and "in use". I've looked all over and cannot determine why the controller licenses do not show up.
NCS version: 1.1.0.58
WLC version: 7.2.103.0
View 1 Replies
View Related
Dec 31, 2012
Having trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
View 4 Replies
View Related
May 12, 2012
my sons laptop wifi is showing error 31 and i cant get it to work
View 2 Replies
View Related
Oct 6, 2011
Have installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies
View Related
