I had a wireless network set up between my Dell D630 and a Del XPS M1210 with IS and worked fine. Then we sold the XPS and got a E4300. I set up a wireless network on it with IS and it also worked fine. Both laptops running XP. The E4300 has SP3 and the D630 was set up with SP2 but I upgraded to SP3. The network was difficult to connect at times so I had to bypass the firewall to connect. Once connected, IS worked fineHowever, latetly it refused wireless connection even though the connection was visible. I have now tried to set up a new wireless between the 2 but it doesn't even show when I refresh the wireless connections in range.
I've just installed windows xp pro sp 3 on my laptop and am going through installing the drivers for the problem devices. I've got everything installed minus the drivers for the sound card. I'm trying to connect to my wireless network and am not having much luck. I know the network is available because i'm on it right now sending this message. However with this new installation everytime i refresh i'm getting the "No wireless networks were found in range" message. I'm also not getting any yellow question marks in the device manager window for this device. I know the card works because it worked just fine with ubuntu before i wiped the hdd and installed xp ....
Windows XP on an older Dell Latitude. All wireless settings appear to be on, yet "no wireless networks are found in range" All other devices in the house see the same 3 networks (mine, mifi, and next door), so this is specific to this machine.
Also, I normally keep this laptop docked, 95% of the time, and earlier in the week disabled the wireless (right click on icon, disable) as I normally do when connected to the dock, since it seems to perform faster (no testing, just my opinion)
Other factors: The computer got undocked without normal undock procedure taking place.
Don't know if this is related, but the sound wasn't working either the last few days I have redocked, rebooted, restarted, checked every possible config I can think of, checked the router to be sure that my device was still listed, etc.
I have a desktop with windows Xp and I too have no wireless networks come up in the box on the right hand side, I know the wireless Linsky cisco wifi is working as I have connected it to another laptop with Vista, but have tried everything to get it wireless and nothing works the Desktop works fine when hard wired?
Trying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
Having trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
Have installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
I have problems with my D-Link DIR 635 router. It shows up fine in list of networks on my girlfriends Mac and on my new laptop, but on my older laptop it doesnt show up at all (whereas a lot of other networks do). Seeing as my current laptop is being repaired at the moment, I need to be able to connect to the net with my old laptop too.
I run Windows XP Professional on my laptop, which is a Compaq Presario f700. why the network doesnt show up?
I bought new laptop ( inspiron N4050 ) 1 month ago, bought access point to make home wireless signal from my wired TP LINK router every thing went good that time, now I wanted to change my windows from win7 prof to win7 ultimate so I had to format the system partition, now the problem is in the drivers, everything I got it working. except the wifi .. the lap wont show any wifi networks around it .. any wifi which I can connect to, while my mobile shows about 4 wifi networks besides mine.
you may need to know that the wired internet port when I plug a wire into it , it works .. I mean the wired net is working and also the bluetooth is working, but wireless net is not showing any networks I can connect to.
I recently moved my computer upstairs to my room, so I have no connection to the internet at the moment. It can't seem to find any of the wireless networks I create, nothing shows up.
We just got our router fixed and everything was working fine till after. Everyone elses computers and my iPod connect just fine. I have done a system restore already and that did nothing. I have no experience with computers. I cannot call tech support cause I am in a foreign country and don't know the language. What else can I try doing to make this work?
My son is at college and his roommates can connect to wireless, but his computer does not recognize a network. It says the settings saved on the computer do not match the requirements of the network
I am having trouble keeping my computer connected to the internet...even though it says my signal strength from my wireless internet is excellent. every time i get online i put in my url and it loads the page but if i click on anything on that page it asks me to connect again even though my computer says im still connected.
I have a Studio 1555 64bit running on Windows 7, within the past few weeks, my wireless connection sporadically turns off, the wireless router is ok, I can connect wifi to my phone. My computer does not recognize any wireless networks, although there are several in the neighborhood. Sometimes it randomly comes on.
Today when I tried to add a network printer,list of browsed printers in network is shown as pc1/hplaser1, pc1/hplaser2, pc2/hplaser1, pc7/hplaser1 and so on. They are all network printers, not local printers.Then why it is not showing the printers alone, why they show the pcs in the network and the same printer is shown in different pcs as they are installed in all of them.
Have an older laptop running XP Home, Desktop running XP Pro with printer on it. Wireless network setup and doing fine for bidirectional file share and print share from old lappie to desktop. All worked great.Bought a brand new high end laptop with Win 7 (not impressed). Finally got the Win 7 new one to recognize both older computers on the Win 7 computer and was able to access file share and print on the desktop. Thought I was doneNope, now while I can see the old lappie and it can see it in the Win7 computer both directions give me cannot access the drive or specific files even though it "sees" themAll files and disks are set to full share. No password is required or any homegroup is setup on the win 7 system. I've been in the bus. a long time so you know I'm at the end of the rope. All searches through knowledge base and the web have yielded no results to this.I did find an absolute to this in insuring that both systems have the same workgroup. Changed the old lappie to the right name. Made no difference in access (after several reboots). Obviously can't run Easy Transfer with this situation.
Now problem #2. I changed the old lappies workgroup to the same as the Win7 computer in the hopes of fixing this. Made no difference but now I have two iterations my XP laptop in the Win 7 system.When selected, the info for one has the old workgroup and selecting the other shows the new workgroup (matching the Win7 workgroup).Anyway, throwing up my hands in frustration and disgust. Find no way to even dump the old workgroup map listing. Jeez. Sure glad they (M/S) made this better?
I got a static ip from my isp. I set up my static ip manually through my linksy router. I need the static ip to connect to a private network for my new job but cant connect to that network. I went to whatsmyip and found that my old dynamic ip is still showing up externally, it looks like my ip4 is using the dynamic as a preferred. My question is do i need to manually change the network connection on my LAN and wireless connection under ipv4 to change it from automatically obtain TO use the following address and put in my static? And do I have to change the DNS also? I am on a home network with one desktop on vista home premium and laptop windows 7.
I just started having this problem yesterday. I was experiencing weird downloading/internet browsing issues and couldn't figure out what the problem was. I started looking around my router settings and noticed that in my DHCP Client list, my computer isn't in it. The router is hooked up to the computer, so it's not wireless. My phone and my girlfriend's laptop are listed, but the main computer isn't. It's especially causing problems with port forwarding. Downloads will stop because the port isn't showing as open. I'm running 64 bit Windows 7 and a Belkin N+ Wireless Router, model F5D8235-4.Firmware is up to date.
I just configured a 2 computers into a routers and and connected them to each other. My computer is them connected to one of the routers(configured PCs). The computer uses the default gateway of the router interface it is connected to. A ping to the default gateway repplies positively. A ping to the second interface to the same router goes successful but a ping to the first interface of the second router gives the "request time out" respond and a ping to the second interface of the second router gives the "destination host unreachable" respond.
My laptop is a Toshiba Satellite, and two days ago it was connecting to the wireless internet just fine. Then it spontaneously disconnected. I went to re-connect and it told me there were no wireless networks in the area at all. I know there are at least 15 in our area my laptop picks up. It was not dropped or shaken in any way, so it is not a hardware problem, I don't think. Hardlining it failed; it said it was connected to "unknown network" and could not connect to the internet.
n someone pleI have a compaq 2000 with a built in wireless button. I could find and connect to my network 2 days ago but now my computer will not find any networks. I have been poking around trying to figure out what is wrong and im scared if i continue im going to really mess up my computer. At first it told me that i needed to fix the wzc service so i found and fixed that so that windows could configure my connection
my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
I have a toshiba 2010 windows 7 laptop, and like two days ago it wouldnt connect to my wifi. i keep going to network and sharing but my network wont come up everyone elses does though. ive tried to fix problem but it just keeps saying connect to a network..or plug in ethernet.
I am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
I have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.
i am unable to connect wirelessly my wireless connection is not showing under the available connections and i can onhy connect hardwired via my router i have done simple troubleshooting with no results i have also tried to go to routerlogin.com and .net and i cant access them i have also done the pinging and everything seems to be in order what are my next steps
From last 2-3 days, my wireless icon is not showing up, neither my computer can catch any signal. The led is working fine. Previously, there was no problem. Suddenly everything stopped. Is it dead???
I recently got a toshiba satellite laptop running win xp.. at first when i connected it had internet..but after adding avg antivirus it began showing limited or no connectivity. ran antivirus ... cleaned up system..changed the ip addresses and now it says connected.. but i cannot go to google or any other online page. it says there is no response from default gateway or dns server... not sure what else to do . I tried rolling back system to before i did anything and still the same.
i am trying to connect(internet) my laptop but its is not connecting through WIFI.diffrent ip addresss is showing on a laptop but my ip address is not showing and it is not connecting.
Some background first. Last night I went trolling around for a solution to an ip address conflict message I receive when I try to go onto Xbox live via a network bridge on my laptop. What I eventually ended up doing was going into my tp-link wireless router settings (not sure of the exact model number as I am not home right now) and reserving two different ip addresses for my laptop and my Xbox using their MAC addresses. It didn't appear to do anything ( now I think possibly because my Xbox needs the same ip as my laptop?). Anyways I tried to go onto Xbox live and it worked at the start (as it always does) and then 30 minutes in, the ip address conflict message came up (usually meaning a disconnect from Xbox live is imminent). But I actually ended up staying online for another 3 hours until the Internet crashed.
Upon further investigation I noticed that my wireless network was not even showing up on my computer, my phone, or any of my roommates computers. I went upstairs to check the wireless router and it was seemingly working correctly (i.e. no flashing lights or anything). Not quite sure what to do. I would go back and change the router settings but I don't think I can without a connection to it.
