Trying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
View 1 RepliesHave installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies View RelatedI have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies View RelatedWhen i first set up my wireless i could see it but couldnt authenicate and connect.I was using fire fox as my browser. I could also see my neighbors network. I downloaded internet explorer and now i cant see either one. i have a program calle dconnectivity doctor and it can see both networks. Iam not a computer whiz .
View 1 Replies View RelatedWhat changed on my Win XP wireless network connections, but I used to be able to see about 5 wireless networks in the neighborhood, including mine. Now it only shows mine. Not that I can connect to any of the others (don't have the security codes), but I find it strange that it used to show all of them, but all but my own have suddenly disappeared. Did I check some setting somewhere (that I can't find now) saying to show only the strongest connection?
View 1 Replies View RelatedI'm working off a three-year old HP notebook, dv-2000 series, running Windows 7 Professional, 32-bit.I suddenly lost wireless connectivity. I can still see wireless networks available - unsecured and secured, five-bar signals - but trying to connect to them fails. This is not a matter of connecting to the network but not having internet access, but rather being completely unable to establish any connection.Troubleshooter says Windows is unable to determine anything. It says check the access point, but I cannot connect to any network - home, starbucks, etc. I have reinstalled both network drivers (ethernet and wireless adapter).I have plugged into a wired connection and updated Windows to the most recent set of updates.I've obviously reset the machine, toggled the wireless, etc.I've reset the TCP/IP stack.I've checked that the WLAN service is running, as well as the DNS and DHCP client services. ipconfig says the wireless adapter has DHCP and Autoconfiguration enabled. Device manager says everything is working fine.
View 1 Replies View RelatedI have a Dell PC from around 2005. I have this router: [url]....All the wires are connected to my PC but I don't get the notification icon, nor is it in network connections window (just my old broadband modem). I don't want to go wireless as such but just use WIFI on my cell/mobile when in the house if I have haven't got my PC on.
View 3 Replies View Relatedi have linksys network monitoring installed on my pc but have been using windows xp to monitor the network. However, after turning on the linksys monitor yesterday, I cannot go back to windows xp. When i do, I cannot view available wireless connections.
View 1 Replies View RelatedA friend of mine had a 802.11b netgear router and all of her computers were running just fine on it so she says. She bought and installed a 802.11n router and bought usb adapters for all her computers and all work, except one, a Dell Optiplex 330 that runs Windows XP.Some drivers were missing such as her Ethernet Controller and a chipset driver but I was able to install those from the Dell website. She had not yet bought a new USB adapter for the computer, I tried using my D-Link adapter and I can see the network in the D-Link connection manager but in Windows when I go to view a list of wireless networks, it doesn't show any. I cannot connect to the network from the D-Link connection manager.
View 3 Replies View RelatedBut I am connected to the internet somehow. There is no ethernet cord connected to my computer and the ethernet adapter is disabled. Also, when I add an SSID to my preffered networks list, it appears, but once I click OK, and bring up that same screen, it is no longer there. Yet, I am still connected to the internet. Wireless Zero Configuration is ON, The wireless adapter is ON, I am connected to the internet as I am typing this How do I get Windows to populate those two lists (the preferred wireless networks and available networks lists)?
View 1 Replies View RelatedThere are a ton of posts about this issue, and I have tried everything. I have an ASUS Eee 1040 PC with an Atheros AR5700EG wireless network adapter running on Windows XP. I've had the computer for a couple years and it has worked fine, until recently. Using inSSIDer, I can view all wireless networks within range, but using Windows, I cannot connect to any wireless networks. It gives me the message that "No wireless networks were found in range." I had a few hotspots that I would regularly use and they are not showing up in the list of preferred networks. I know for certain that some of the hotspots that are within range are indeed broadcasting their ssid. I can only connect if I manually add a hotspot as a preferred network and configure it with the correct security settings. Even then, viewing available wireless networks gives nothing, and Windows doesn't remember the hotspot. Here is what I have tried:restarted Wireless Zero Configuration service checked windows files haven't changed using sfc /scannow in a command window updated the driver for the wireless adapter rebooted the computer kicked and screamed
What else can I do short of reinstalling windows?
why does my laptop not even show any view wireless networks.In the wireless connection status box, it only says properties, disable but where it should say view wireless networks there is nothing! It is blank. Why is this? And how do I get it to view my wireless networks? I have tried a wireless usb adapter which I use for my other laptop. That usb adapter is comptabile with both WEP and WPA and the computer does not pick up the software. I don't know what else to do.
View 5 Replies View RelatedMy laptop is not showing the option to connect wirelessly . i was using the internet wirelessly two days ago but now the only option that shows up is connect via broadband ethernet cable. if i go to the control panel and open network and sharing center and i pick connect to the internet the only option i get is broadband. and if i click show a list of options i dont have it only shows dial up connections
View 1 Replies View Relatedi m configuring a 887 router for ssl vpn. The goal is to configure full tunnel mode, so the client connect to the webpage generated by the router, it logs in, it has the "application svc" window where you can download the client and connect. Problem is everything is working except for the fact that the window with the ssl application doesn show up at all and so clients can't download the client and connect.
this is the relevant part of the configuration:
ip local pool sslvpnpool xxxxx xxxxxx
ip http server
ip http authentication local
[Code]....
I've just installed windows xp pro sp 3 on my laptop and am going through installing the drivers for the problem devices. I've got everything installed minus the drivers for the sound card. I'm trying to connect to my wireless network and am not having much luck. I know the network is available because i'm on it right now sending this message. However with this new installation everytime i refresh i'm getting the "No wireless networks were found in range" message. I'm also not getting any yellow question marks in the device manager window for this device. I know the card works because it worked just fine with ubuntu before i wiped the hdd and installed xp ....
View 9 Replies View RelatedI have added a wireless network on my computer but it isn't visible from the networking connections drop down. Why?
View 3 Replies View RelatedWindows XP on an older Dell Latitude. All wireless settings appear to be on, yet "no wireless networks are found in range" All other devices in the house see the same 3 networks (mine, mifi, and next door), so this is specific to this machine.
Also, I normally keep this laptop docked, 95% of the time, and earlier in the week disabled the wireless (right click on icon, disable) as I normally do when connected to the dock, since it seems to perform faster (no testing, just my opinion)
Other factors: The computer got undocked without normal undock procedure taking place.
Don't know if this is related, but the sound wasn't working either the last few days I have redocked, rebooted, restarted, checked every possible config I can think of, checked the router to be sure that my device was still listed, etc.
I have a desktop with windows Xp and I too have no wireless networks come up in the box on the right hand side, I know the wireless Linsky cisco wifi is working as I have connected it to another laptop with Vista, but have tried everything to get it wireless and nothing works the Desktop works fine when hard wired?
View 2 Replies View RelatedI had a wireless network set up between my Dell D630 and a Del XPS M1210 with IS and worked fine. Then we sold the XPS and got a E4300. I set up a wireless network on it with IS and it also worked fine. Both laptops running XP. The E4300 has SP3 and the D630 was set up with SP2 but I upgraded to SP3. The network was difficult to connect at times so I had to bypass the firewall to connect. Once connected, IS worked fineHowever, latetly it refused wireless connection even though the connection was visible. I have now tried to set up a new wireless between the 2 but it doesn't even show when I refresh the wireless connections in range.
View 1 Replies View RelatedHaving trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
View 4 Replies View RelatedI am trying to configure a 4507 R chassis with Dual SUP but i cannot see teh switchpot mode trunk encapsulation dot1q?
I have typed:
interface GigabitEthernet5/1
description DOWNLINK toxxxxxx
switchport mode trunk
channel-group 11 mode on
!
I have have searched all other commands and sub-commands but could only find dot1q-tunnel which I beleive is for QINQ or some QoS featues and lot for L2 encapsulations?
the puzzling is:
XXX-Core4507#sh int gi5/1 trunk
Port Mode Encapsulation Status Native vlan
Gi5/1 off 802.1q notrnk-bndl 1
(Po11)
when I connect the dostribution switch a 3507 to this int gi 5/1, both interfaces do come up?
I am having some trouble trying to connect to a different network. It seems when I click connect to a network there aren't any networks listed. Now, I know there are networks available near me because I have connected to them before it just seems that now some service or setting is disabled on my laptop that is preventing me from viewing other networks near me. Not sure what it could be but I have tried figuring it out and I couldn't.
View 3 Replies View RelatedI am having trouble viewing all the Administration logs in ACS View. I have my Local Log Target set to a Maximum log retention period of 90 days. In ACS View I can display authentications that go back 90 days + However when I try and display the "ACS_Configuration_Audit" in View and perform a Custom query that goes back 90 days it will only display about 35 days of Admin logs.I know the logs are there because when I go into CLI and do a search like "show logging | i "ObjectType=Administrator Account" the Administration logs go back over a year.why ACS View cannot display all the Admin logs?The ACS is running v5.1.0.44 Patch 6 (Also experiencing this in a v5.2 ACS as well)
View 2 Replies View RelatedI'm trying to transfer filed from my laptop to my pc but I'm having problems. First of all both comps are running on windows 7 64 bit. Its weird because out of the 4 computers I have in the house, all of them can see each other EXCEPT my laptop, which cant be seen by any other computers, and when I'm on the laptop I can't see any others.I setup a home network with pass protect off, sharing on etc... on my laptop and no other computer can see it. I think somethings up with the connection though. On this computer I'm on right now, my connection sais "network" and not my actualy connection name. On my laptop, (I have a ethernet plugged in, wireless works also, tried both) when I'm connected it sais Bell~ (my internet name). So my laptop shows my internet name even when its connected through ethernet, but my desktop sais network, not the name
View 18 Replies View RelatedI volunteer at a school who just purchased two 48 port SGE2010 managed switches. I am not a big fan of the web gui and was hoping to see the standard Cisco command prompt instead of the menu-type interface.
Is there a way to view the MAC table showing which MAC address is plugged into which port on the switch? I have been fighting with the menu and the gui for a while now and do not see this anywhere.
I have problems with my D-Link DIR 635 router. It shows up fine in list of networks on my girlfriends Mac and on my new laptop, but on my older laptop it doesnt show up at all (whereas a lot of other networks do). Seeing as my current laptop is being repaired at the moment, I need to be able to connect to the net with my old laptop too.
I run Windows XP Professional on my laptop, which is a Compaq Presario f700. why the network doesnt show up?
I bought new laptop ( inspiron N4050 ) 1 month ago, bought access point to make home wireless signal from my wired TP LINK router every thing went good that time, now I wanted to change my windows from win7 prof to win7 ultimate so I had to format the system partition, now the problem is in the drivers, everything I got it working. except the wifi .. the lap wont show any wifi networks around it .. any wifi which I can connect to, while my mobile shows about 4 wifi networks besides mine.
you may need to know that the wired internet port when I plug a wire into it , it works .. I mean the wired net is working and also the bluetooth is working, but wireless net is not showing any networks I can connect to.
my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies View RelatedI am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedI was using my little PC laptop and it fell, and suddenly the internet doesn't work.It doesn't show me any wireless option at all (in bottom right corner. or in control panel)and in "Network Connections"there isn't the wireless option as there used to be.Now it only has 'LAN or high speed internet"I've tried looking at old threads but haven't found anything suited.Is there a way to reactivate? I've tried everything I can think of! (laptop has no CD drive)
View 2 Replies View RelatedI'm looking to replace my Thomson router with a router capable of being programmed so it can turn wireless off at a certain time.
View 8 Replies View RelatedJust bought an Inspiron 620 and I'm struggling to connect to our router. When I try to 'connect to a network' I have no option of wireless connection.
View 5 Replies View RelatedI have the E4200 router, trying to change the security option to WEP to see if my WD TV live will connect to it, becuase right now with the WPA2 its not connecting.
I dont know why my WD TV live wont connect to the router, its visible in the list though!!
even my PS3 is having troubles connecting to the E4200 with the WPA2 security.