Suddenly Lost The Wireless Option?
Jan 27, 2011
I was using my little PC laptop and it fell, and suddenly the internet doesn't work.It doesn't show me any wireless option at all (in bottom right corner. or in control panel)and in "Network Connections"there isn't the wireless option as there used to be.Now it only has 'LAN or high speed internet"I've tried looking at old threads but haven't found anything suited.Is there a way to reactivate? I've tried everything I can think of! (laptop has no CD drive)
View 2 Replies
ADVERTISEMENT
Jul 19, 2012
A couple hours ago, I set up a temporary AdHoc to share or "tether" the internet connection from a laptop (which got its internet from a router), to my iPod Touch. It worked fine and everything, in fact I was pleasantly surprised by the speed of it. Since it was a temporary AdHoc, I disconnected, and the network was deleted as expected. After a while I wanted to do it again, but when I tried to make the AdHoc, the option to "Share Internet Connection" has disappeared. I'm really puzzled as it worked just a while back, and now even the option is gone. Did some research on it and found out that it's some weird bug that had never been addressed. It had to do with the LAN and Wireless network adapters apparently and one of them had to have the ICS option checked and the other one didn't (something like that). Here are the screenshots of those settings on both my network adapters. Both adapters are enabled, except the LAN isn't "connected" since my primary way of getting internet is through a router connected to another computer.
View 2 Replies
View Related
May 26, 2012
Packard bell alp ajaxc3 notebook has suddenly lost wireless,it has been working for about 18 months with no problems,the system is windows 7.first tried system restore about three times,no luck the toolbar shows the icon with a red cross but check the device manager and it shows the atheros adapter as working properly.tried ip config and it says everything is disconnected and the adapter as switched off.there is no external switch and I can't find any info on the net as to a software switch.the router is ok because my granddaughter dell works ok and I have two others with wired connects.even tried a windows repair via the install disc without luck,tried another adapter which it recognized and installed with the same result have been through the forum and tried everything that remotely resembled my problem,same result.
View 4 Replies
View Related
Sep 5, 2011
I use a D-Link DWA-552 Xtreme Wireless-N PCI adapter on my Windows XP Home SP3 desktop computer that has been working flawlessly for months, until last night when it suddenly stopped being able to connect.I was just on the web last night doing what I normally do, and all of a sudden out of no where I lost internet connection and I couldn't get it back. I've tried resetting the router downstairs, I've tried restarting and shutting down the computer, and did three system restores (that all failed anyway), and none of these things are getting my connection back. Now also for some reason I can't even open up my network adapter's wireless network manager anymore because it closes itself not even a second after I boot it up.The modem and router downstairs look perfectly fine and all the other computers in the house, even the laptops, can all connect but mine, so something must be up with my network adapter.
View 14 Replies
View Related
Mar 6, 2013
Up until 2 days ago I've had no problems with my v1 running 1.0.05. I was copying something to my drive and the connection became non-existent. Going into the menus it shows my drive as having full capacity available. Well i konw thats not true. i unplugged it and directly connected it to a PC. All of my info was there. I connected it back to the router and nothing. No shares of any sorts. It shows it detected the drive. Does not show USB speed and does not allow you to create new shares.
View 1 Replies
View Related
Jan 29, 2013
I have an HP EliteBook 6930p with windows 7 installed and everything was working fine until i did a recent windows upgrade (might just be a coincidence) and i suddenly lost internet connection. My laptop picks up the router, shows full strength but i cannot connect to the internet wireless or Ethernet cable. I restored to a previous date and it worked fine, and all my other devices work fine (iPad, iPhone, other laptops). The trouble is when i connected to the internet again it up dated windows and i cant restore back to the original date anymore as it has gone from the list.
View 5 Replies
View Related
Nov 15, 2012
i buy my dell laptop inspiration n 5050 from 3 months it works fine till the last week i lost my wifi connection .i install anew windows but the same problem also i format all partitions without fixed>also i download fix it from microsoft but nothing happen
View 3 Replies
View Related
Mar 20, 2011
Ok i have a dell inspiron m5030 running windows 7. The wifi card that came with it is the atheros 9285. It was working then out of know where i logged off and logged back in when i changed classes and it doesnt work anymore. In the device manager it says it is installed but cannot start.
(Before this I was able to connect with wifi almost instantly without a problem.)
View 19 Replies
View Related
Jan 15, 2013
RV220W worked good with QuickVPN, but suddenly lost such ability and doesn't allow connection from any Windows machine (Xp,Win7 32/64 bit)
QuickVPN is ver. 1.4.2.1
Cisco RV220W firmware is ver. 1.0.4.17
Client error on Windows XP in Log.txt :
[STATUS]OS Version: Windows XP
[STATUS]Windows Firewall is OFF
[STATUS]One network interface detected with IP address 10.1.1.165
[STATUS]Connecting...
[DEBUG]Input VPN Server Address = x.x.x.x
[code]...
View 4 Replies
View Related
Mar 4, 2013
I'm looking to replace my Thomson router with a router capable of being programmed so it can turn wireless off at a certain time.
View 8 Replies
View Related
Sep 10, 2012
Trying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
View 1 Replies
View Related
May 5, 2012
Just bought an Inspiron 620 and I'm struggling to connect to our router. When I try to 'connect to a network' I have no option of wireless connection.
View 5 Replies
View Related
Feb 28, 2012
I have the E4200 router, trying to change the security option to WEP to see if my WD TV live will connect to it, becuase right now with the WPA2 its not connecting.
I dont know why my WD TV live wont connect to the router, its visible in the list though!!
even my PS3 is having troubles connecting to the E4200 with the WPA2 security.
View 1 Replies
View Related
May 31, 2012
I recently bought dell n5110. It is not giving me wireless option. I go to Network and sharing center -> set up a new connection -> connect to the internet.. and it shows me only dial up and broadband option.
I did Fn+F2 to switch on my wireless.
View 8 Replies
View Related
Feb 20, 2013
Region : Malaysia
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : V5
ISP : Streamyx
TD-W8951ND V5 No longer have Mac Spoofing support.i just bought this modem since my old one is faulty. and i realize that my modem is V5 my previous modem is V4 and there is Mac Spoofing support there.
View 1 Replies
View Related
Feb 23, 2011
I was wondering if the AE1000 is the best option for the the E4200 wireless router? Ultimately I want an adapter that can take advantage of the full potential of the router (as in the 450 Mbps wireless speed).
View 1 Replies
View Related
Dec 11, 2011
I have configured a cisco UC520 with inbound called coming in on FXO port 0 and have configured it as a co-line. I have 4 phones set up on the system including the wireless 7921 phone, the problem is that if i answer the call on the 7921 it does not give me the option to hold or transfer the call however the other phones do (7931).
View 1 Replies
View Related
Jul 2, 2012
While configuring a 5500 wireless controller, i came across this option of DHCP proxy under Advanced tab of Controller Option.It asks for the dhcp option 82 remote id format & the dhcp timeout.
1. What is the significance of this & when do we use it?
2. Also, under each wlan ssid that we create, there is an option of dhcp address required under the advanced tab. Do we need to use this option, if we are defining a normal dhcp pool in our controller for that ssid.
View 3 Replies
View Related
Jun 14, 2012
Access Restrictions option does not exist on my WRT160Nv3 Broadband Router Setup Page and I need to use that option.
View 2 Replies
View Related
Mar 7, 2012
Just fired up an e4200 router and was realy easy and everything working great HOWEVER I can a Canon MP490 printer that I have connected to the router via USB and Cisco Connect is only showing Wireless Printers as a connection option!!
I am on a MAC using OS X 10.7, have Cisco Connect Version 1.4 (12005.2) and the firmware updated today.
View 1 Replies
View Related
Jul 14, 2011
I'm interested how to enable or use the "SpeedBurst" option on Linksys WRT54GH router?
View 1 Replies
View Related
Apr 6, 2013
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I have a question regarding the admin page on the router. Default it seems to accept only http access and I cannot find the option to switch this to ssl over https. Now the admin password goes across the WLAN in clear text which is not secure and not what I want. Is there any way to change the setting so the page is only accessible through https?
View 1 Replies
View Related
May 26, 2010
I recently purchased the E3000.I thought i had read that this devices can act as an access point. There is no clear "access point" mode option so i configured it as best as i could to work with our radius server. I can connect to the wireless with radius credentials just fine but i don't get assigned a ip address from dhcp. I tried using an old blekin that does have ap mode and it works just fine.
View 1 Replies
View Related
Dec 7, 2011
I have Verizon FiOs and their provided wireless router does not cover my entire house. There are plenty of dead spots throughout the house (house is 3500sq. ft.)
The FiOS comes into the basement so currently I have their router is set up in the basement. I wanted to shut off their FiOS wireless router and use my new E4200 router for wireless coverage. I am pretty sure the E4200 alone will not be able to handle my house. Most of the rooms of the house are already prewired with Ethernet cables. All those wires converge in the same closet in the basement, therefore moving the router is not an option. I was thinking of putting whichever product you experts recommend in my office which is on the 2nd floor on one side of the house. This room does have Ethernet access. However it is currently at 50-60% signal (with FiOS). My bedroom which is on the opposite side of the house is at 10-20% signal (with FiOS).
I am looking to buy something to reach all the deadspots and have WIRED LAN access (if need be in the future). What is my best option? I have researched the RE1000, the WAP610N, and even some of the other routers (E2500 or E3200) for hours. I am not an expert, and frankly after hours of reading, these technical terms of "range expanding" and "access points" are all sounding synonymous to me. I guess what I need is the range expansion on the same WiFi SSID my E4200 will provide (to cover all areas of my house), as well as an access point for connecting TVs, Xbox, or PCs in the future.
1) RE1000
2) WAP610N
3) or a router to use as an access point/range expansion combo? E2500 or E3200?
Naturally, is the range capability better for Routers or the WAP610N or RE1000?
View 1 Replies
View Related
Sep 17, 2012
Using CCC with EA4500, where do I find the control for enable/disable broadcast of the SSID?
View 5 Replies
View Related
Dec 2, 2012
With my old routeur (wrt310n) I used to be able to limit the wireless speed.I cant seem to find the option with my new routeur, EA3500.did they remove the option ?
View 1 Replies
View Related
Oct 31, 2012
I know this is a "home" router, but there are a lot of common vulnerabilities that can be detected.
1. Is there any intent to offer a firmware update for the Non Cloud Connect option.
2. Does Cisco intend to make the Cloud Connect Firmware "feature complete" compared to the Non Cloud Connect?
3. Is there going to be support for Stateful DHCPv6?
View 1 Replies
View Related
Mar 8, 2012
When accessing the E3200 router using then ERROR 501.Not Implemented.That method is not implemented. The error occured after enabling the "Local Management Access, Access via: HTTPS" option on the Administration > Management tab.I tried different browsers FireFox (version 10), Internet Explorer (version 8,9), the same error was displayed and no acces granted to the E3200 router. I reseted the router and tried the latest firmware 1.0.03 build 9 Feb 1, 2012, but after enablib the option the issue occured again and it is not possible to connect to the router.
View 9 Replies
View Related
May 7, 2012
I am using a WLC 5508 and its internal DHCP server. I cant find anywhere I can setup option 43. However, the access points are connected in just fine. Do I need to worry about setting up a seperate DHCP server to get option 43 setup properly?
View 7 Replies
View Related
Mar 14, 2013
I have Cisco 1131 & 1300 Light Weight Acces Points and I have 5508 WLAN controller. If i enable the wlan controller internal DHCP Server can this access points will work with this internal DHCP server or do i need to configure DHCP option 43 for these access points? Can these access points works with LWAPP or do i need to configure CAPWAP?
View 4 Replies
View Related
Oct 4, 2011
Using netgear wnr2000 for home network. All fine until one day no access for one computer. Router appears unable to assign ip address. Even if address is assigned no connection to Internet is made.Was working well previously and all other computers on network still have access.
View 3 Replies
View Related
Feb 8, 2013
I have a laptop which has always connected to this wireless network fine until yesterday. The wireless network seemed to suddenly just disappear. There are three other laptops in the house which can still detect that wireless network and connect to it except that one now. I have restarted that laptop and the network reappeared and it connected. But when it was restarted again, the network showed just for a minute or so and the laptop cannot connect and then the network disappears. I've restarted it many times now and it just shows the network for a brief moment, trys to connect and then the network disappearsThis is the info for the laptop:ech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bitProcessor: Intel(R) Pentium(R) CPU P6100 @ 2.00GHz, x64 Family 6 Model 37 Stepping 5Processor Count: 2RAM: 2998 MbGraphics Card: Intel(R) HD Graphics, 1275 MbHard Drives: C: Total - 293422 MB, Free - 248128 MB;Motherboard: TOSHIBA, Portable PCAntivirus: Trend Micro Titanium Maximum Security, Updated: Yes, On-Demand Scanner: Enabled
View 5 Replies
View Related
Jul 24, 2012
So, first of all, I have two PCs in my home, one connected directly to the router, the other connected through the wireless network. I use the wireless connected PC. In the past I've had some issues of my connection cutting out on random occasions for about a minute then reconnecting back. This happened to every single user connected to the network, including the one connected directly to the router. It was just a minor nuisance so I just put up with it. However, one day my internet just slowed down to a crawl and I don't think any hardware/software changes were made to cause this, but I may be wrong. What confuses me is that, now the internet has slowed down, the disconnecting issue is a very rare occurrence. It happens probably once a day, where as before it was much more frequent. I assume it has something to do with my network not being so strained. The PC connected directly to the router does not seem to have this issue, in the speed test below, it has a higher download rate, around 6-7mbps I think (it's pretty bad in this area, but it's usable).I have done some research as to why this is happening, but there are so many different diagnoses for a slow internet that finding the one I'm having is really difficult. I thought it was just my ISP performing maintenance but it's lasted for about 4-5 days now.
View 3 Replies
View Related
