With my old routeur (wrt310n) I used to be able to limit the wireless speed.I cant seem to find the option with my new routeur, EA3500.did they remove the option ?
View 1 RepliesI bought a EA 3500 router and my speed is going only half the speed it was without the router.I have charter 100 meg internet, and a alienware Pc with a gigabit card.I wa going 100 megs and now I am at 38-50.I have tried hard reset with the bottom button, I have turned off all firewalls, I have changed my MTU to 1400 and 1500, I have went to speedguide.net and ran a optimizer., I have tried just about everything I can think of. firmware is up to date.
Is there anything I am missing, or am I not going to get these speeds with this router, I was told when I bought it, it was what I needed, Was I duped?, or is there just some setting i need to fix i am not aware of?
I have had a EA3500 router in front of a 3Mb ADSL connection for about 6 months. This delivered essentially the same WAN performance as the WRT54G (v5) I replaced with it. Either router would get 2.4-2.8Mbps through a variety of speed test sites, inlcuding the CCC builtin speed test.I upgraded to a 10Mbps cable internet connection today, but the EA3500 won't deliver any more speed than with the old ADSL connection. The reason I am blaming the EA3500 is that if I plug my computer directly into the cable modem, I get a solid 9.9Mbps down/0.99Mbps up, which is exactly how my line is provisioned. With the router in place and active, I get the same slow WAN connection, 2.8-2.9MBps, whether using a PC connected with GigE, a PC connected via Wireless-N, or with an iPhone. This all implicates the EA3500's WAN connection.
Is there anything that can be done do let the EA3500 work properly? I upgraded my firmware today in hopes that that would change something. But, I get the same speed with the latest firmware (1.1.39.145204) as I did with the previous version. Speed across my wired LAN is excellent; I can sustain 70MB/sec from my PC to my NAS. It's only the WAN connection that is performing poorly.I can downgrade to the non-CCC firmware if that would make a difference; would it?
I did a simple speed test comparing my EA3500 and Linksys WRT54GL. I used DSL Reports for the test. I was quite shocked and am wondering if the difference is due to the poor wireless driver in the Classic firmware that was updated in the Cloud firmware. Here are my numbers: EA3500, Classic firmware Download average 475 kb/s Upload average 725 kb/sLinksys WRT54GL Ver 1.1 (latest firmware) Download average 3250 kb/s Upload 725 kb/s
Needless to say I have gone back to my trusty WRT54GL until Cisco decides if it will update the Classic firmware and give us 2nd class Cisco customers the same hardware the 1st class Cloud customers have. Time will tell.
I'm interested how to enable or use the "SpeedBurst" option on Linksys WRT54GH router?
View 1 Replies View RelatedI just set up a new EA3500. I added my HP Photosmart C4680 printer, however, my computer can not find. In other words, the router could see it to add it, but my computer can not find the printer at the router. MacBook Pro OS 10.6.8
View 3 Replies View RelatedI have tried using my router name and password when you 1st connect and got nothing.I have held the reset button for a minute straight to try and restore default settings and have got nothing. I'm trying to enter my ISP into the web browser
View 2 Replies View RelatedI have an EA3500, I have 30 Mbps download when I connect my pc directly to the modem. When I add in the EA3500 router it drops to only 10 Mbps download on both wired and wireless devices.
View 9 Replies View RelatedSystem:
HP Pavilion dv7-6135dx Ent Pc Win7 Home Prem 64
Motorola Surfboard Modem
Linksys EA3500 Router
Netgear 10/100 24 port switch
my wife bought me this EA3500 for Father's Day this year. It's only been hooked up for a couple of weeks (we were in the middle of a move during Father's Day), but now I have no wifi on either band. My wife can no longer connect to it either. We have tried completely resetting it, we have reset the modem, the switch, laptops, everything. Still no wifi. It worked out of the box, but now we have nothing. Does HP needs a certain type of driver? Our iPhones show connected and surf the brower's and FB app with no issues while in wifi mode, but then again, I can pull the ethernet from the internet port and the phone's still show connected (good job, iOS).Cable from main splitter runs to basement where the modem is located. Modem ethernet feed up a wall to a wall plate where the router is. Router then feeds back to the switch. The switch then sends the IP throughout the house for the LAN lines, and the EA3500 feeds all of the wireless devices (used to). So, Cable box, modem, router, switch. Router is currently good for LAN only. I am connected to it via LAN right now, 2 feet from my laptop.
In connections:IPv4/IPv6 both "No Internet Access" (for IPv4, if you change a setting in the setup, it becomes "Internet Access" for about 3 seconds.)Media State: EnabledSpeed: Alternates between 72Mbps and 144Mbps
i've recently upgraded from E3200 as i wanted slightly faster and more reliable router, only to find out this one is more troublesome then the older model.
Upgraded to latest firmware:
EA Series Linksys Smart Wi-Fi Firmware
11/19/2012
Ver.1.1.39.145204
i've excellent WIFI reception - setup 2.4GHz and 5GHz networks (diffrent SSID). i've few apple computers on the WIFI, and ipod touch 5th gen with iOS 6.01.Seems that often when i browse web on the ipod, the WIFI drops (takes about 60s to reconnect - almost as if the router is rebooting). But it's not conclusive and unpredictable. It also happens just with the computers when browsing web.
I am using a brand new Linksys EA3500. We have 2 laptops connecting to it. One is an older XP machine which never has any problem. The other, a Vista machine, periodically drops the connection to the internet when connecting wirelessly. It never loses the connection to the Linksys EA3500 router, it just says "Access: local" and there is no internet. If I plug the Vista machine in wired to the router it works fine. I've tried my old router and I don't get this problem, which leads me to believe that my wireless adapter is functioning properly on the Vista machine.
When the vista machine drops the internet, I can still get into the router configuration at 192.168.1.1, but when I click on the tab which says wireless it sometimes says: "Router not found. You are not connected to your router." It says this despite the fact that I am connected to the router?I've tried reinstalling Windows, that didn't make any difference. I am convinced that it is a problem with the router, but I can't find any settings to adjust which remedy the situation. Of coarse, I've tried reseting my modem and Router many times...doesn't resolve the issue. I've also gone into DOS and done an ipconfig release_all and renew_all.
All of us connect effortlessly to wifi via the EA3500. All of us, however, also have iPhones, and yet none of us can get on wifi with our iPhones. Apple insists the problem is on the Cisco side, not the Apple side, and I have to agree with them because all of the iPhones connect effortlessly to wifi everywhere else it is available. I tried contacting Cisco support, but they wound up telling me that if I paid them they might be able to assist, since the router is outside the warranty period. (I tried explaining to them that I didn't know about the extent of the problem until 10 days ago My wife simply uses her mac; none of my daughters lives here and only one of them had an iPhone until ten days ago when I purchased the other ones. But that was to no avail.) Why no one can get on wifi with iPhones when they can, simply and effortlessly, with the PC, the iPad, and their macs?
View 5 Replies View RelatedHow can I limit bandwidth speed of guest accounts? Or are there free softwares available to do something like that? It's kinda like the hotspot softwares - where we can set hourly, daily, monthly allowances and see a report on their connectivity.
View 3 Replies View RelatedI own a CISCO Linksys 3500 router I use in my home. Every time there is a power outage, the router stops working. The only way I have managed to get it to restart is to remove the software, disconnect the router and then re installed and set up the router again
View 1 Replies View RelatedI just discovered that my wireless download speeds are 5Mbps, compared to 16Mbps if my laptop is connected directly to the modem or wired through the router. Uploads are 2Mbps either way. I have a WRT54GS v.6 with firmware version v1.52.8 which I updated today, completed by setting factory default through the router webpage after I discovered this discrepancy. The firmware update did not improve the download speed appreciably, if at all.Should the wireless connection be that much slower than the wired connection through the router? If not, what sort of issues could I be having to account for this?
I did just replace my modem when I discovered I was having erratic speedtests and that corrected that problem. That is when I became aware of the wireless issue, so not sure how long that has been the case. I have Charter's 16/2 HSI, living in a sparsely populated area with solid internet service. There is no external nor internal interference on this 2.4Ghz band.
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies View RelatedRegion : Italy
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 67406
ISP :
I have problem on router td-w8960n v4 internet speed download is limited a 4 mb in device android e ios wifi connected for test i use application speedtest.net on ipad 3 and samsung galaxy s
I recently upgraded my Wi-Fi router to an EA3500 and am controlling it using Smart Wi-Fi running on a wired Windows 7 machine.So far, I have been able to add devices to the network without issue and each of those connections works fine. All, except my TV, have been Windows 7 based machines. Smart Wi-Fi Device List has been able to "see" each device and I have been able to add them to that list as well.
I am attempting to add a Windows 8 desktop computer to the network which is using a external USB wireless adapter. That computer can see and connect to the network through the EA3500 and the connection seems to work fine. The only issue is that its adapter does not show up in the Device List.
1) Does the Device List do anything else besides showing a list of devices I chosen to add to my network?
2) How do I get my Windows 8 wireless adapter to show up in the Device List?
I was wondering if theres a program or something that I could use for my router to limit the bandwidth that it gives on wifi? I currently have about a 20down/2up connection from time warner with a linksys E1200 router.
I just want to limit the wifi speeds to about 70% because recently someone moved in that does a lot of downloads and makes my games go from 40 ping to 300+ and also my phone is through the internet, which becomes unusable.
just some simple setting to set the max wifi data to 13megabits/s down 1mbit up or something.
I have a Cisco e2500 dual band router.I have a cable modem pulling down 55mps.When I put it through my router I get 22mps wireless and 55mps wired. I want my wireless speed as fast as it can go!I have changed channels, I have gone with just wireless N I have done just Mixed. I contacted customer support and they won't talk to me since I am out of warranty (I just not got internet this fast).One small caveat - when I take the channel selection off auto and change to a preffered channel my one laptop drops connection a lot. We have two laptops and both get the same speed. (No I am not running speed tests with a bunch of other things running etc)
View 6 Replies View RelatedSo I went out and bought a brand new EA4500, because I thought my old router was bad due to horrific wifi Speeds on my Wireless devices like my laptop and Samsung Galaxy S3. Well now I have the same issue with this new router.My speed from comcast straight from the modem is 25mbps down and 5mbps up, on the routers through a wired connection I get the same thing. As soon as a switch over to Wireless my connection goes from 25mpbs/5mpbs to less then 2mbps down. I've reduced the MTU, and I've tried turning off QoS. Nothing seems to work
View 9 Replies View RelatedI recently bought an E4200 and noticed that the wireless speed keeps dropping as it stays connected.As soon as I power it on, my iPhone and notebook connect at 54Mb, but as they remain connected, the speed keeps dropping to 48, 36 and one morning, my phone was oscillating between 5 and 11. The iPhone was almost at the same spot, and the signal was around 85~95%. On my 3 year old DIR-300, the speed don't change at all, and it's in a place where I can see around 15 connections. On the E4200 I can only see 2 other networks.I've already tried switching channels, fixed and auto channel, updating firmware and a few other common configurations. At first, I thought it was my repeater, but I turned it off and it didn't work. Turn my cordless phone off didn't change it also.
View 3 Replies View RelatedRouter: WRT54GL v1.1
Firmware: Tomato 1.28.1816
OS: Windows 7 Professional
Wireless adapter: Atheros AR9285 Wireless Network Adapter
I upgraded my Internet speed with my ISP to 60Mbit/s and I get following download results at speedtest.net:Is there a way to speed up my wireless connection with this router? On the sticker it says 54Mbps, so I would guess it should be possible.
I just picked up a EA6500 wireless router today and I am a bit disappointed. I paid $199 for this router because I was hoping to take advantage of of fast N speeds and the advanced features it offers.When I first logged in to set up the router, I saw an amber exclamation point with a note that read "Updating Linksys Smart Wi-Fi Service". When I put my password in I was met with a "Unexpected Error" message.Also, the firmware updater doesn't work. Now on to the more bothersome issue. Wireless speed is poor. I replaced a WRT160NL router with this one. On my old router using WPA2-Personal (AES) I would see speeds of ~300 Mbps. On my EA6500, I see 120 Mbps. I have checked and double checked all wireless and security settings and don't see anything that looks wrong.
View 9 Replies View RelatedI own a ea4500 wireless router, I have tested the speed at speedtest.net and wirelessly I get around 9 mbps. My speed is 23 mbps when I hard wired the pc. I have check the speed on a tablet ( android ), pc and a mac to about 5 feet away from the router with no walls or anything between the two devices.I have checked all the settings but I don't see anything wrong, I have changed to N mode only to make sure I use top speed.All my devices are able to use N.
View 3 Replies View RelatedMy internetprovider increased speed from 25 Mbps to 40 Mbps. Providermodem direct to pc via LAN gives indeed speed 40 Mbps. However through router lanport or wireless no higher speed. How comes?
View 2 Replies View RelatedI've got a 2 month old e3000 with the latest firmware. (1.04 i believe) I have run speedtests from wired and wireless machines on my network. All of the wired connections show a speed of around 15Mps (which is consistent with my providers guaranteed speed) but when I test any of the wireless connections I get somewhere between 3 and 7 Mps. I get the same degradation in speed when I stand directly next to the e3000.
Other then SSID and Passphrases I have everything set to the default settings. I have rebooted multiple times with no change. The e3000 is mounted on a 2x4 with several feet of clearance all around and is also located in the coolest part of the house. I am using Speedtest.Net for all the tests.
I am running an E3000 router with 1.0.04 build 6 Dec 6, 2010 firmware. I have two computers on a wired Gigabit LAN and others on WiFi (802.11g). At first, all works well and I get normal throughput via the WiFi computers.However, after about a week, WiFi speeds crawl to a fraction of what I normally get (from 12-13 Mbps down to 1-2 Mbps and from 4.8 Mbps up to less than 1 Mbps). My cable modem service is 40 Mbps down and 5 Mbps up (I get 38.9 down and 4.9 up via the LAN based computers)
How I resolve this? I need to reboot the router! Once it comes back on-line, my throughput on WiFi is restored UNTIL the following week where speeds are back to a crawl. While WiFi crawls, the LAN based computers still enjoy maximum throughput.
I updated the Firmware...then the WRT54GC can't work now,it's power led green and red always,I can't ping 192.168.1.1 via wired or wireless.wireless led shutdown.my laptop can't find any wireless network.
View 9 Replies View RelatedI recently bought myself the E4200v1 router, and have had several issues with it. One issue I cannot seem to find a workaround for is the wifi bandwidth problem.I have a 100/10 mbitl internet connection. The router claims to support 300/450 mbit speeds over wifi, so that should be plenty. in reality however, that isnt so.Even though my N-standard wifi adapter on my machine states it has a 130 mbit connection to the router, I consistently test the internet throughput when using wifi and speedtest.net to around 20-21 mbit. If I put in a cable, I instantly get full speed, 100/10 mbit.
Have to add; I am not new to the networking game, I have a CCNA and a degree in computer sciences, and work with hosting web sites using cloud tech every day. At this point, I have tried everything related to settings on the router, so I can only conclude that there's some kind of bug in the firmware. I would expect the standard firmware to work, and not having to install DDWRT or other custom firmware.
My newly installed E1200 only sends speeds of about 16 mbps wireless, but sends the ful 60 mpbs when wired. What is going on. Firmware is up to date. Changing the channels didn't do anything. Is there a way to figure out if the problem is with my laptops wireless card.
View 9 Replies View RelatedI bought a Sonos multiroom-system, and connected the first player to my E2000 router through Ethernet. It then gets a dynamic address through DHCP, I can see the Sonos within the network when looking in the admin tool of the router.When I start the Sonos controller software on my PC (XP), the software can not find the Sonos when my PC is connected through Wifi.As soon as I connect PC to the router with ethernet cable the Sonos is found immediately and can be initialised. After that, I can disconnect the cable and control the Sonos wirelessly. (as long as I don't close down the controller software for too long)
From what I understood from the sonos.com website, the Sonos sends an UPnP multicast signal on port for SSDP on port 1900 for initial connection. Further communications port are described below.Somehow, this multicast package seems not to be transferred into the wireless LAN, only into the wired LAN. Do I have to open some ports, filter some ports?Forward them?
I have recently purchased a Cisco E4200 to replace my D-LINK DIR-655, which I thought was defective because I was getting slow wirless file transfer speed, regardless of setting, location and client.Using the E4200, when I transfer a file from a PC to another, both connected at 300mb on the 2.4ghz band, the file transfer rate reported by windows 7 and networx is from 2MB/s to 3.5MB/s. I think those transfer rates are not acceptable. Is that a good assumption ? I would expect something in the range of 10MB/s (which is what I get with a cheap dlink router, wired)
I also had great difficulty finding a channel. I had to try them all one-by-one as the auto channel selection made my PCs connect at 130mb.The E4200 is setup as follows:
-WPA-Personal
-Channel 5
-802.11n only
I have tried 3 different computers with different network adapters and they all underperform (IMO..).There are no other wireless networks in my area.I also took the E4200 to my office which is very crowed. Every single channel is occupied by several wireless networks. I get a file transfer speed PC to PC of about 2MB.I basically could have kept my DIR-655 as the speeds are identical.