I own a CISCO Linksys 3500 router I use in my home. Every time there is a power outage, the router stops working. The only way I have managed to get it to restart is to remove the software, disconnect the router and then re installed and set up the router again
View 1 Replieswell, i just bought an E4200 and, by the way, was very hard to configurate. But the real problem is: if there is a power loss, both modem and e4200 lights up, but no internet connection is provided.Even the SSID desappear. I trried to disconnected everything, reconnect by parts, but no success.I wired connect the E4200 to my iMac and the router was ok, configurated.Then, i reconnect to the modem and all worked ok.Now im testing possibilities and is i reboot the router, the net desappear and i have to try possibilities till it works.
My older router connected automatically, without a problem, but i decide to buy "the best" brand and its top product". Now im disappointed..
Twice i realize that if the connections drops out, i have to disconnect and reconnect the internet cable from my E4200...
I'm using Comcast cable with a Linksys WRT4Gs wife router. I live in an older building which loses power for a little while (10 minutes or so) with every big storm. Every time the power comes back the linksys router completely resets...I have to plug into it and change the SSID, turn security back on, enter the password again, and then I'm fine...can I prevent this from happening? Before I plug into it I see both networks available (mine under my name, but I can't connect to it, and linksys as a public network), is there a step I'm missing to make my router remember it's identity?
View 1 Replies View RelatedI'm loosing about 40GB of data. If worst comes to worst i might go with another brand of router instead as i don't wanna waste a lot of money again as i currently feel i have with the E4200. Enough whining, here is my problem. The FTP and Media Server feature works nicely. I have a 2TB USB 2.0 HDD attached to the router's USB port. I use it for images and my music collection ripped there so i can play it all from my PS3 and TV. I also have many GB of video recordings and converted DVD discs for easier access. (And no, before anyone speaks of piracy, it IS legal, at least in my country, to back up your legit media) Now, everything worked fine, until one day after a few weeks, the router hanged for some reason so i decided to reboot it. To my disappointment it also wiped video and audio from my HDD which really got me pissed as i lost all track of what i had on the HDD. The Media Server was also having connection issues once in a while so i decided to update the firmware from 1.0.00 to 1.0.03. It immediately fixed the connection issues of the Media Server. Another noticeable change is that files transferred via FTP will show immediately via the Media Server without the need to update the database via the router as i needed to do in 1.0.00. Now today there was a power loss in the neighbourhood so the router went dead along with the HDD. To my big disappointment, everything was gone from the HDD when i started it up again. Images, music, video and even my application backups etc. It was just plain empty except for the root folders. I have done a few tests and figured that even if the HDD stays on, cutting the power to the router will wipe the connected HDD. What's up with that? Even a silly Windows PC wont nuke your files that much if an accessed HDD was disconnected while in use. Do i really need a UPS system for the router and safely disconnect the HDD from the router via the user interface every day? If so, the concept of having a router with these nice features is really useless and money theft in my opinion.
View 9 Replies View RelatedSo I have an WRVS4400N V2 and just got a new laptop with an Intel 6230 Wifi card in it and have an odd problem.While the laptop is on battery power the network gets massive packet loss.
I don't know what to do.Laptop manufacture says its AP but AP worked fine with old laptop and works fine when laptop is on power and all other devices seem to be fine with the exception of my Xbox 360 that wont connect if I have it on WPA2 but I will post another thread for that.
System:
HP Pavilion dv7-6135dx Ent Pc Win7 Home Prem 64
Motorola Surfboard Modem
Linksys EA3500 Router
Netgear 10/100 24 port switch
my wife bought me this EA3500 for Father's Day this year. It's only been hooked up for a couple of weeks (we were in the middle of a move during Father's Day), but now I have no wifi on either band. My wife can no longer connect to it either. We have tried completely resetting it, we have reset the modem, the switch, laptops, everything. Still no wifi. It worked out of the box, but now we have nothing. Does HP needs a certain type of driver? Our iPhones show connected and surf the brower's and FB app with no issues while in wifi mode, but then again, I can pull the ethernet from the internet port and the phone's still show connected (good job, iOS).Cable from main splitter runs to basement where the modem is located. Modem ethernet feed up a wall to a wall plate where the router is. Router then feeds back to the switch. The switch then sends the IP throughout the house for the LAN lines, and the EA3500 feeds all of the wireless devices (used to). So, Cable box, modem, router, switch. Router is currently good for LAN only. I am connected to it via LAN right now, 2 feet from my laptop.
In connections:IPv4/IPv6 both "No Internet Access" (for IPv4, if you change a setting in the setup, it becomes "Internet Access" for about 3 seconds.)Media State: EnabledSpeed: Alternates between 72Mbps and 144Mbps
i've recently upgraded from E3200 as i wanted slightly faster and more reliable router, only to find out this one is more troublesome then the older model.
Upgraded to latest firmware:
EA Series Linksys Smart Wi-Fi Firmware
11/19/2012
Ver.1.1.39.145204
i've excellent WIFI reception - setup 2.4GHz and 5GHz networks (diffrent SSID). i've few apple computers on the WIFI, and ipod touch 5th gen with iOS 6.01.Seems that often when i browse web on the ipod, the WIFI drops (takes about 60s to reconnect - almost as if the router is rebooting). But it's not conclusive and unpredictable. It also happens just with the computers when browsing web.
I am using a brand new Linksys EA3500. We have 2 laptops connecting to it. One is an older XP machine which never has any problem. The other, a Vista machine, periodically drops the connection to the internet when connecting wirelessly. It never loses the connection to the Linksys EA3500 router, it just says "Access: local" and there is no internet. If I plug the Vista machine in wired to the router it works fine. I've tried my old router and I don't get this problem, which leads me to believe that my wireless adapter is functioning properly on the Vista machine.
When the vista machine drops the internet, I can still get into the router configuration at 192.168.1.1, but when I click on the tab which says wireless it sometimes says: "Router not found. You are not connected to your router." It says this despite the fact that I am connected to the router?I've tried reinstalling Windows, that didn't make any difference. I am convinced that it is a problem with the router, but I can't find any settings to adjust which remedy the situation. Of coarse, I've tried reseting my modem and Router many times...doesn't resolve the issue. I've also gone into DOS and done an ipconfig release_all and renew_all.
All of us connect effortlessly to wifi via the EA3500. All of us, however, also have iPhones, and yet none of us can get on wifi with our iPhones. Apple insists the problem is on the Cisco side, not the Apple side, and I have to agree with them because all of the iPhones connect effortlessly to wifi everywhere else it is available. I tried contacting Cisco support, but they wound up telling me that if I paid them they might be able to assist, since the router is outside the warranty period. (I tried explaining to them that I didn't know about the extent of the problem until 10 days ago My wife simply uses her mac; none of my daughters lives here and only one of them had an iPhone until ten days ago when I purchased the other ones. But that was to no avail.) Why no one can get on wifi with iPhones when they can, simply and effortlessly, with the PC, the iPad, and their macs?
View 5 Replies View RelatedOur wireless network has started to drop out periodically. If we pull power and restore, the network immediately comes back up on all our our devices. We have the WRT54G, and we have 2 PCs, 2 Macs, and 3 iPhones, and a wired home phone. Normally there are not this many devices connected, but with everyone home for Thanksgiving and all these devices on the network we have started to see this issue.
Are there simply more devices than the router can handle? Is one of the devices crashing the network for everyone? What typically will cause something like this?
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies View RelatedWith my old routeur (wrt310n) I used to be able to limit the wireless speed.I cant seem to find the option with my new routeur, EA3500.did they remove the option ?
View 1 Replies View RelatedI recently upgraded my Wi-Fi router to an EA3500 and am controlling it using Smart Wi-Fi running on a wired Windows 7 machine.So far, I have been able to add devices to the network without issue and each of those connections works fine. All, except my TV, have been Windows 7 based machines. Smart Wi-Fi Device List has been able to "see" each device and I have been able to add them to that list as well.
I am attempting to add a Windows 8 desktop computer to the network which is using a external USB wireless adapter. That computer can see and connect to the network through the EA3500 and the connection seems to work fine. The only issue is that its adapter does not show up in the Device List.
1) Does the Device List do anything else besides showing a list of devices I chosen to add to my network?
2) How do I get my Windows 8 wireless adapter to show up in the Device List?
I've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
I have used our home network with an apple iOS baby monitor app for a year without issues. An iPod is the transmitter and broadcasts the signal on my home network. Any other iOS device can pick up the signal when on "receiver" mode. This app worked great for over a year, but recently the app drops out after 1-3 hours. The dropped device also cannot get to the internet via Safari or communicate via the app. The WRT160Nv2 router indicates that the devices are still connected and the iOS devices indicate they are still connected, but they cannot communicate.
To fix the issue, I simply toggle the unit to/from airplane mode. This disables/enables the wifi and the unit jumps right back on the network and all is well. This is a pain though when the baby monitor drops in the middle of the night and we have to walk to the baby's room.
I have tried to recreate the issue with other video steaming (iphone video to appleTV), but I have not found the issue with any other app. Maybe I just have not run the movie long enough (3 hours+) like I do with the baby monitor app at night. Are there any wifi router timing or other settings that could cause something like this?
I continue to try to trouble shoot this:
1. wifi router issue
2. iOS issue
3. baby monitor app issue
My computer is a Toshiba Sattelite o/s win 7. My wi fi signal is excellent, yet my signal keeps dropping or saying limited access.I have tried resetting the router and resetting my default windows settings on the computer. All other lap tops and wireless devices in the house do not have an issue.I discovered the other day as long as the laptop ( not the router) is plugged in and not running on batter power that i do not have a problem staying connected.For fun i wondered if it had something to do with the power cord making some kind of connection when plugged into the lap top, (since everything is more compact in them)I tried having the power cord plugged into the lap top but not into a power source but I still lost signal.
View 1 Replies View RelatedI have a WRT310N V2 wireless router, with a WMP600N dual-band PCI card in my computer, using Vista 64x. I have had the same set-up for the past year or so, even after moving to a new apt, which I have been in now for 3 months. It has worked perfectly, up till recently. Over the past week however, my router has been dropping the connection, to the point of having to wait for it to show back up in my connections list. I made no changes to my setup, prior to the problems. I am kind of doubting it's my wireless card, as I can still see other routers. I have tried changing the MTU size, the Threshold, made sure the firmware was up to date, etc. I re-installed the drivers for my NIC and even changed ports, just to be on the safe side. I don't know what else to do, except go out and get another router. I have to use wireless, as I have nowhere to run cables at. I had this problem before with a Linksys wireless router, but figured it was due to the extreme amount of bandwidth my game uses online. Ironically, both routers are doing the same thing. They hit lag every 60 seconds almost on the money. I'm a gamer, so this is a huge inconvenience for me.
View 5 Replies View RelatedThis is another E3000 "connection drops" thread. Some background: I have two E3000's that are cascaded. The main router is in my basement connected to my cable modem and is my DHCP server. The second one is on the main floor and provides my wireless signal (no DHCP, and is hard connected to the main router).I have lots of connection drops with the wireless router on the main floor. Lately I have noticed a trend, though. My connection drops mostly when I browse my network (usually browsing pictures on another computer) or when large files or videos are being transferred. If I connect a cable, I have no problems. When wireless, I have signal drops.I have tried every trick and tip that I've seen on this forum or been provided in the Linksys FAQ. I've changed the beacon interval, fragmentation threshold to 2306 and CTS to 2307, I've tried changing channels, I've checked and unchecked boxes for NAT, Filters, etc. I've tried different combinations of WPA2 passwords. I've tried dynamic routing, static routing, blah blah blah...
When I set the 5Ghz channel to Auto(DFS) it defaults to channel 36 and 144Mbps. When I use other channels, I get 300Mbps. Either way, my connections still drops.
I have the latest firmware 1.0.04 Build 6.I even have the router sitting on top of a laptop cooling pad to keep it cool.No matter what I do, as soon as I start browsing my network the wireless connection drops.I am so frustrated! I upgraded my WRT-160N to this E-300 router to get the faster speed and dual band but have had nothing but trouble. I never had a connection drop with my 160N.
EDIT: I notice that when my signal drops, I can see the power LED blinking on the router, like it's going through a reboot cycle.
Router: E1200 2.0.02 build 3 Feb 15, 2012
These symptoms are stumping me:
WiFi drops 80% packets from new computers (Win7, IPv4 andIPv6 enabled) to reliable internet hosts. WiFi is OK (0% loss) from new computers to E1200 itself (ping E1200 IP address).Old computers, mobile devices, and wired are OK to reliable internet hosts.Basic Wireless Settings are Mixed, Auto Channel Width. Wireless Security is set to WPA2/WPA Mixed Mode. Guest Access enabled.
I've been experiencing a strange, repeatable behavior with my Linksys E1000. I have several wireless and wired devices connected to my E1000:
Wired: TivoHD, Sony BluRay Player, Sony TV, Windows XP Wireless: Lenovo Laptop (Windows 7), HP Laptop (Windows 7), 3 iPods, 2 iPhones
When I try to copy large files (~ 4GB) from my (wired) Windows XP box to either of my (wireless) laptops, the Linksys drops my WiFi network -- but the wired connections continue to work (including internet access). Copying the same/similar file from a WiFi device to a wired device appears to work correctly, as does copying from WiFi to WiFi.
To be clear, my WiFi network "disappears" -- it is no longer listed as an available network (as opposed to just dropping internet connectivity for WiFi). Unplugging the router and plugging it back in brings my WiFi network back up.
I have been able to repeat this issue with multiple files over the course of several weeks, and it happens about 75% of the time (i.e., I am occassionally able to complete a file copy from wired LAN to WiFi).
A little bit of background: I resurrected an old Windows XP box and am using it for shared network storage. I copied about 400 GB of files from my laptops to the XP box (WiFi to wired) with no issues at all. Pulling the same files back from XP to my laptops (wired to WiFi) has been causing the issue described above.
Immediately after a power outage, my internet connection predictably drops after a set period of time or usage. It is either after about 30 min or 5-15 mins of watching Netflix. I have a modem hooked up to a wireless router and use the network on my iPhone, laptop and Roku. Since the problem, I have dropped to just having my laptop connected but this has not worked. The wireless network will disappear after the 5 - 20 mins, the light on the modem and router will show no internet (all other lights are normal). Internet connection will be reestablished if I either unplug both the modem and the router (not just one or the other) OR if I unplug the ethernet line from the modem to the router and plug it directly into my laptop (the internet light on the modem will go from "off" to "on"). Despite internet connection working from transferring from the router to the laptop if I connect it back to the router, the internet lights goes off again (resolves upon unplugging and plugging modem and router back in). The internet has not yet dropped when it is physically plugged into my laptop.
I have tried the following:
-Powercycling (temp fix until it crashes again)
-Plugging into a different outlet (I cannot connect it to a different phone line, only have 1 with DSL. Also, I do not have phone service or cable, just internet via DSL)
-Resetting modem
-Resetting 2 different routers
-Calling ISP, their test of the modem was inconclusive
Again, my wifi does not see my network whenever the internet is dropped or the ethernet cord is unplugged from the modem. The outlets I have it plugged into has some type of electrical issue, two electrical devices have shorted out in the room they are in. I do not think this issue is electrical, everything seems to have constant power (unless the power outage shorted out something in the modem). Below are some details of my modem and router. I will provide any additional info requested. I will gladly buy a new modem but I want to see if it can be fixed first.
My modem: Westell
WireSpeed Dual Connect
Model: A90-210030-04
DSL Statistics
Line State: Up
Modulation: G.DMT-Mode
Data Path: Interleaved
[code].....
Router: Linksys E2000 Internet Connection Type: Automatic Config - DHCP (I tried PPPoE and it never got a valid IP address from my ISP)
we have two WLC model 5508 with software version 7.0.116.0 (25 ap supported for each), i tried to add a new access point air-lap1131ag-e-k9 but after five minuts (maximum) the ap reboot, i replaced :
- power injector
- AC/DC adapter
- patch ethernet
- switch port
- switch
- ip of the access point
- reset a default of all access point i tried
- reboot of both wlc
I took the ap and connected directly to the switch (with or without power injector), but the access point reset with this reason.
I have 3 WAP321, all set to uk time zone, all the settings restore apart from the time, on reboot that defaults back to 1999 despite NTP server listed, interestingly have to manually reset time to present before NTP will update it.
View 1 Replies View Relatedsetup an external hard drive with music on on the usb port on my EA3500 and actvated ftp but I cant access it from the net.
View 1 Replies View RelatedFor hours i tried to find info online of how to access QoS on EA3500 router. I cannot find it on the cisco connect cloud page.
View 1 Replies View RelatedIn my home network, I have a Synology. It has 10.0.123.123 as local IP address on my local network and it can be accessed by internet with the dynamic domain name.So when I'm home, I have to use 10.0.123.123 to access it, and when I'm away, I have to use trucmuche.diskstation.me.Would it be possible to configure the EA3500 to redirect the domain name "trucmuche.diskstation.me" to 10.0.123.123 when I use the domain name inside my home ?A friend told me that I had to configure "loopback" but I don't know how..
View 3 Replies View RelatedI have a switch stack with three WS-C3750X-48 switches running 12.2(55)SE. Recently, stack member 3 went offline for a few minutes, after being online for over a year. A show version on member 3 reports that the system returned to ROM by power-on.
Stack member 3 shares a UPS with a router that did not lose power and all three stack members have stack power with four 350 WATT power supplies between the three of them. There are no crashinfo files on any of the switches, log files show the stack ports on the other switches going offline then switch 3 being removed from the stack.
Surveillance recordings show there was no one near the switch during the time and AAA accounting shows no clues. Is it possible the switch crashed without leaving a trace in the logs, a crashinfo file and report that it returned to ROM by power-on?
I've read before that loose stack cables can cause stack member reboots. Would such an event generate log messages other than the stack ports changing states to down?
We have 2 of the SG200-26 switchs. When ever we loss power all the settings are reset to default. Even if we loss power for 1 min. This includes the IP, user, password, etc. How can I change this so the settings are saved?
View 1 Replies View RelatedI just recently purchased a Cisco ASA 5505 ASA ver 8.2. I run a teamspeak server/ssh/dns and domain on the same server on the network. Before I switched to the asa, I have a regular DGL-4100 that ran with no issues. I have noticed that the connections are very unstable and disconnect frequently and when they do they take 1 to 5 minutes to be able to reconnect. I have done some cisco IOS but am fairly new to this. [code]
View 4 Replies View RelatedThe guest network on the router keeps going down. It can be seen but it cannot be connected to. Sometimes it works for a day or 2 and then it doesn't. I have to constantly babysit the network and it is entirely frustrating because the only fix is to reboot the router.I have tried factory resetting several times.I have tried re-flashing the fw.I'm using the non-CCC fw because CCC had way, way too many issues.These routers have been out for months and many people have been having issues and somehow Cisco doesn't see fit to work on firmware that stabilizes them at all? It's like, they release a router and then forget about it - the next batch comes along, often the same guts with a different shell and it's the same thing over again. I had a WRT610N and I said I'd never buy another Cisco after that but I broke my rule because of being lured by these "App enabled" features, which mind you have nothing at all over the competition since the CCC doesn't even work for most people.
View 9 Replies View RelatedI have a EA3500 wireless router with the new style (smartwifi) firmware. I've scoured the web admin interface and can't find any sort of 'status' page that would tell me the external IP. I've looked through the support docs but they only show how to find internal/local IP.
View 2 Replies View RelatedI have an EA3500. PPPoE connection. Can't seem to choose my DNS server (use Unblock-US) since the router insistently forces me to use the DNS from ISP.How can i work this around? I'm kinda tired of people asking me why i am changing the DNS. I want to change the DNS and that's final. It's a resource like any other and i want to use it.P.S: i tried most of the basic troubleshooting. I tried my old router back on and the DNS's works fine. I tried even conecting the old router re-routing the new one, and the other router manages the selected DNS's servers fine.
View 9 Replies View RelatedIf someone has the original firmware for the EA3500 to copy. I need to downgrade my router after Cisco sabotaged it with their Cloud Connect. This will be the firmware you have right out of the box. Be sure you go into the Admin. section and Save a Copy before you ever connect to the Internet. Also Uncheck the Auto Updates box or you will be fed the Cloud Connect (and its amazing Terms Of Service).
View 6 Replies View Related