When i first set up my wireless i could see it but couldnt authenicate and connect.I was using fire fox as my browser. I could also see my neighbors network. I downloaded internet explorer and now i cant see either one. i have a program calle dconnectivity doctor and it can see both networks. Iam not a computer whiz .
View 1 RepliesI have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies View RelatedWhat changed on my Win XP wireless network connections, but I used to be able to see about 5 wireless networks in the neighborhood, including mine. Now it only shows mine. Not that I can connect to any of the others (don't have the security codes), but I find it strange that it used to show all of them, but all but my own have suddenly disappeared. Did I check some setting somewhere (that I can't find now) saying to show only the strongest connection?
View 1 Replies View RelatedI'm working off a three-year old HP notebook, dv-2000 series, running Windows 7 Professional, 32-bit.I suddenly lost wireless connectivity. I can still see wireless networks available - unsecured and secured, five-bar signals - but trying to connect to them fails. This is not a matter of connecting to the network but not having internet access, but rather being completely unable to establish any connection.Troubleshooter says Windows is unable to determine anything. It says check the access point, but I cannot connect to any network - home, starbucks, etc. I have reinstalled both network drivers (ethernet and wireless adapter).I have plugged into a wired connection and updated Windows to the most recent set of updates.I've obviously reset the machine, toggled the wireless, etc.I've reset the TCP/IP stack.I've checked that the WLAN service is running, as well as the DNS and DHCP client services. ipconfig says the wireless adapter has DHCP and Autoconfiguration enabled. Device manager says everything is working fine.
View 1 Replies View RelatedI have a Dell PC from around 2005. I have this router: [url]....All the wires are connected to my PC but I don't get the notification icon, nor is it in network connections window (just my old broadband modem). I don't want to go wireless as such but just use WIFI on my cell/mobile when in the house if I have haven't got my PC on.
View 3 Replies View Relatedi have linksys network monitoring installed on my pc but have been using windows xp to monitor the network. However, after turning on the linksys monitor yesterday, I cannot go back to windows xp. When i do, I cannot view available wireless connections.
View 1 Replies View RelatedTrying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
View 1 Replies View RelatedA friend of mine had a 802.11b netgear router and all of her computers were running just fine on it so she says. She bought and installed a 802.11n router and bought usb adapters for all her computers and all work, except one, a Dell Optiplex 330 that runs Windows XP.Some drivers were missing such as her Ethernet Controller and a chipset driver but I was able to install those from the Dell website. She had not yet bought a new USB adapter for the computer, I tried using my D-Link adapter and I can see the network in the D-Link connection manager but in Windows when I go to view a list of wireless networks, it doesn't show any. I cannot connect to the network from the D-Link connection manager.
View 3 Replies View RelatedBut I am connected to the internet somehow. There is no ethernet cord connected to my computer and the ethernet adapter is disabled. Also, when I add an SSID to my preffered networks list, it appears, but once I click OK, and bring up that same screen, it is no longer there. Yet, I am still connected to the internet. Wireless Zero Configuration is ON, The wireless adapter is ON, I am connected to the internet as I am typing this How do I get Windows to populate those two lists (the preferred wireless networks and available networks lists)?
View 1 Replies View RelatedThere are a ton of posts about this issue, and I have tried everything. I have an ASUS Eee 1040 PC with an Atheros AR5700EG wireless network adapter running on Windows XP. I've had the computer for a couple years and it has worked fine, until recently. Using inSSIDer, I can view all wireless networks within range, but using Windows, I cannot connect to any wireless networks. It gives me the message that "No wireless networks were found in range." I had a few hotspots that I would regularly use and they are not showing up in the list of preferred networks. I know for certain that some of the hotspots that are within range are indeed broadcasting their ssid. I can only connect if I manually add a hotspot as a preferred network and configure it with the correct security settings. Even then, viewing available wireless networks gives nothing, and Windows doesn't remember the hotspot. Here is what I have tried:restarted Wireless Zero Configuration service checked windows files haven't changed using sfc /scannow in a command window updated the driver for the wireless adapter rebooted the computer kicked and screamed
What else can I do short of reinstalling windows?
why does my laptop not even show any view wireless networks.In the wireless connection status box, it only says properties, disable but where it should say view wireless networks there is nothing! It is blank. Why is this? And how do I get it to view my wireless networks? I have tried a wireless usb adapter which I use for my other laptop. That usb adapter is comptabile with both WEP and WPA and the computer does not pick up the software. I don't know what else to do.
View 5 Replies View RelatedHave installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies View RelatedI am having some trouble trying to connect to a different network. It seems when I click connect to a network there aren't any networks listed. Now, I know there are networks available near me because I have connected to them before it just seems that now some service or setting is disabled on my laptop that is preventing me from viewing other networks near me. Not sure what it could be but I have tried figuring it out and I couldn't.
View 3 Replies View RelatedI'm trying to transfer filed from my laptop to my pc but I'm having problems. First of all both comps are running on windows 7 64 bit. Its weird because out of the 4 computers I have in the house, all of them can see each other EXCEPT my laptop, which cant be seen by any other computers, and when I'm on the laptop I can't see any others.I setup a home network with pass protect off, sharing on etc... on my laptop and no other computer can see it. I think somethings up with the connection though. On this computer I'm on right now, my connection sais "network" and not my actualy connection name. On my laptop, (I have a ethernet plugged in, wireless works also, tried both) when I'm connected it sais Bell~ (my internet name). So my laptop shows my internet name even when its connected through ethernet, but my desktop sais network, not the name
View 18 Replies View RelatedI am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedI setup one location (business retail shopping center) in maryland (using swann dvr/cameras- will switch to qsee) with no internet available.I setup another location (business auto shop) in virginia (using qsee dvr/cameras) with internet through verizon fios.I have internet through cox at home in virginia which I can view cameras remotely only to one location in virginia.
View 2 Replies View RelatedTrying to get on internet in Windows 7. Have connected to wireless network. Am hardwired to router and yet cannot connect to Internet. Wireless Network Connection 2 is not connected and therefore not going to the Internet
View 2 Replies View RelatedMy laptop is an HP zv6000"Pavillion" running XP SP3. I can't veiw any wireless networks in network connections thought the laptop is sitting next to it. I have tried putting in a preferred network, both secured and unsecured changing settings on my router as I went. I tried various settings including WPA-PS2 which is in the network connections. I have the wireless turned on WLAN is on.
View 1 Replies View RelatedI'm having an HP laptop with windows 7 installed on it, but cannot view available wireless network. under network and settings i can see the wireless network card, which means the wireless drivers has been installed. but can't view my wireless network but other computers are viewing my wireless network.
View 1 Replies View RelatedI have a problem with an AP1310 which may need me to open a case for RMA. is there any way I can view the serial number using the GUI since the AP is already installed on a high mast but I didn't enable telnet on that?
View 1 Replies View RelatedI have WRT54GS I can't view the setting tab to check or change. It seem the tabs are light in color and I click on them. I did have a virius which I got rid of. I have removed the linksys software and re installed
View 1 Replies View RelatedRegion : UnitedStates
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP : at&t
Having trouble setting up router for remote viewing my Swann DVR. I've gone to Advanced Set Up( NAT)to Vertual Server and added two rules for DVR one for port 85 and one for port 9000 both with the DVR's IP Add. of 192.168.1.165 Is there something else I should do?
I have bought Linksys E 4200. I'm connected up by protocol PPPoE by my provider, but IPTV doesn't work on my computer.I use the program IP-TV Player and/or VLC Player and both don't work. I only see the list of channel, but any channel doesn't load. Before I used the router DLink Dir 300, and everything was Ok.
View 3 Replies View RelatedWe have a Cisco 4404 WLC and and about 70 Cisco 1131 APs. I am very new to the Cisco WLC and I need to know how to view its AP registration and unregistration logs. We have a AP that has unregistered and we can't seem to find what switchport it was attached to. It would be useful to know the IP address and ideally any CDP information it had. Unfortunately you can only view this information in the WLC if the AP is registered, but at this point it is not.
View 2 Replies View RelatedI've recently upgraded my home network and now my wdtv can't connect to my shared hdd's on my pc for streaming purposes. Previously I had some piece of **bleep** G router/modem combo from Verizon and I didn't have any problems accessing my network shares, I did have a streaming problem with some .mkv's because the signal was so poor. I Finally dropped some cash on a d-link modem and an linksys E3000 router. Here's the messed up part, if my wdtv is plugged, physically, into my router I can access my shares just fine. I can stream movies with out any lag what so ever. If I go wireless (as I have previously been with the old westell router/modem combo) I can no longer see my network shares. I can connect to the internet and do netflix, pandora, ect. But when I go under network shares all that shows up is my router..
View 1 Replies View RelatedI currently have 2 e4200 wireless routers. The first router is connected to 3 devices via ethernet, and the 4th port is connected to my other e4200v2 which is set as bridge mode. The main router is at one end of the house, the second bridge mode router is at the other end.My wireless devices are connected to the main e4200v2, along with all the wired clients.
When wirelessly connected to the 2nd e4200 (the bridged one) I cannot connect to or ping any wireless clients that are connected to the main router. (For example, in my bedroom I am connected with my computer to the 2nd bridged router, and I am trying to ping my other computer that is wireless connected to the main router. I am unable to ping to this computer. When I am conected wirelessIy to the mian router, than I am able to ping the other wireless computer on the same router. Note:I am able to access any hard wired devices to the main router, regardless of which router I am connected to. The issue only appears to be when trying to connect to a wireless device that is connected to a different router than the device I am connecting from.Both routers are setup on the same subnet mask with firmware Ver.2.1.39.145204
I purchased some cameras for my building. I have them set up ok on port 85 but I can't view them remotely until I set up the router to forward the port. I have a charter modem and the E2500 router.
View 1 Replies View RelatedI have a wireless lan and a USB Modem Can I use Both at the same time to download two files each file on a lan
View 1 Replies View RelatedMy PC usually shows me a list of wireless connections when i click on that icon.Today, however, it is not showing the list and displays the following message instead:'windows cant configure this wireless connection.' no list, so i am not able to connect to my network.i tried setting up a wireless network through wizard but to no avail. I dont know why this is happening. i got a new wifi modem. i cant even blame the new connection alone, because before that my pc at least used to show other inaccessible wireless networks in the list. but today it shows nothing.i have a windows xp.
View 1 Replies View Relatedi cannot connect to the available network even the homegroup.i have do troubleshoot but it cannot fix.and tell that i have problem with my adapter network..
View 1 Replies View RelatedI've just installed windows xp pro sp 3 on my laptop and am going through installing the drivers for the problem devices. I've got everything installed minus the drivers for the sound card. I'm trying to connect to my wireless network and am not having much luck. I know the network is available because i'm on it right now sending this message. However with this new installation everytime i refresh i'm getting the "No wireless networks were found in range" message. I'm also not getting any yellow question marks in the device manager window for this device. I know the card works because it worked just fine with ubuntu before i wiped the hdd and installed xp ....
View 9 Replies View RelatedMy friend uninstalled some programmes on his Toshiba laptop and now he can only connect to the router via an ethernet cable. When trying to find wireless networks the message "No wireless networks detected" appears. Other laptops and devices have no problems connecting throughout the house. I've uninstalled and reinstalled the right drivers for the wireless adapter, checked that the TCP/IP settings are on obtain ip address automatically, checked that the NIC is enabled in the BIOS and checked that the WLAN is on automatic in the services utilty and there is no other WZC running.
View 3 Replies View RelatedMy current project is to have a printer that actually works. You don't need one often, but when you do you really need one. I'd like the printer to be wireless as we all use laptops but don't want to have the printer near the router.
The simple solution is to shell out for a wireless printer, but I have access to a cheap (and good) ethernet only printer. Now, how to connect it? I have a spare old router, which I'm thinking of connecting to the printer. I'd then have to get the router to join the network (is that possible?) or somehow bridge them. The to devices to join would be this and this.