802.11b Netgear Router / Unable To View Wireless Networks
Aug 15, 2012
A friend of mine had a 802.11b netgear router and all of her computers were running just fine on it so she says. She bought and installed a 802.11n router and bought usb adapters for all her computers and all work, except one, a Dell Optiplex 330 that runs Windows XP.Some drivers were missing such as her Ethernet Controller and a chipset driver but I was able to install those from the Dell website. She had not yet bought a new USB adapter for the computer, I tried using my D-Link adapter and I can see the network in the D-Link connection manager but in Windows when I go to view a list of wireless networks, it doesn't show any. I cannot connect to the network from the D-Link connection manager.
View 3 Replies
ADVERTISEMENT
Aug 23, 2012
I have a Dell PC from around 2005. I have this router: [url]....All the wires are connected to my PC but I don't get the notification icon, nor is it in network connections window (just my old broadband modem). I don't want to go wireless as such but just use WIFI on my cell/mobile when in the house if I have haven't got my PC on.
View 3 Replies
View Related
Jun 19, 2011
But I am connected to the internet somehow. There is no ethernet cord connected to my computer and the ethernet adapter is disabled. Also, when I add an SSID to my preffered networks list, it appears, but once I click OK, and bring up that same screen, it is no longer there. Yet, I am still connected to the internet. Wireless Zero Configuration is ON, The wireless adapter is ON, I am connected to the internet as I am typing this How do I get Windows to populate those two lists (the preferred wireless networks and available networks lists)?
View 1 Replies
View Related
Sep 23, 2012
There are a ton of posts about this issue, and I have tried everything. I have an ASUS Eee 1040 PC with an Atheros AR5700EG wireless network adapter running on Windows XP. I've had the computer for a couple years and it has worked fine, until recently. Using inSSIDer, I can view all wireless networks within range, but using Windows, I cannot connect to any wireless networks. It gives me the message that "No wireless networks were found in range." I had a few hotspots that I would regularly use and they are not showing up in the list of preferred networks. I know for certain that some of the hotspots that are within range are indeed broadcasting their ssid. I can only connect if I manually add a hotspot as a preferred network and configure it with the correct security settings. Even then, viewing available wireless networks gives nothing, and Windows doesn't remember the hotspot. Here is what I have tried:restarted Wireless Zero Configuration service checked windows files haven't changed using sfc /scannow in a command window updated the driver for the wireless adapter rebooted the computer kicked and screamed
What else can I do short of reinstalling windows?
View 5 Replies
View Related
Aug 22, 2011
I have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies
View Related
Feb 22, 2012
When i first set up my wireless i could see it but couldnt authenicate and connect.I was using fire fox as my browser. I could also see my neighbors network. I downloaded internet explorer and now i cant see either one. i have a program calle dconnectivity doctor and it can see both networks. Iam not a computer whiz .
View 1 Replies
View Related
Jun 24, 2012
What changed on my Win XP wireless network connections, but I used to be able to see about 5 wireless networks in the neighborhood, including mine. Now it only shows mine. Not that I can connect to any of the others (don't have the security codes), but I find it strange that it used to show all of them, but all but my own have suddenly disappeared. Did I check some setting somewhere (that I can't find now) saying to show only the strongest connection?
View 1 Replies
View Related
Aug 22, 2011
I'm working off a three-year old HP notebook, dv-2000 series, running Windows 7 Professional, 32-bit.I suddenly lost wireless connectivity. I can still see wireless networks available - unsecured and secured, five-bar signals - but trying to connect to them fails. This is not a matter of connecting to the network but not having internet access, but rather being completely unable to establish any connection.Troubleshooter says Windows is unable to determine anything. It says check the access point, but I cannot connect to any network - home, starbucks, etc. I have reinstalled both network drivers (ethernet and wireless adapter).I have plugged into a wired connection and updated Windows to the most recent set of updates.I've obviously reset the machine, toggled the wireless, etc.I've reset the TCP/IP stack.I've checked that the WLAN service is running, as well as the DNS and DHCP client services. ipconfig says the wireless adapter has DHCP and Autoconfiguration enabled. Device manager says everything is working fine.
View 1 Replies
View Related
Aug 1, 2012
i have linksys network monitoring installed on my pc but have been using windows xp to monitor the network. However, after turning on the linksys monitor yesterday, I cannot go back to windows xp. When i do, I cannot view available wireless connections.
View 1 Replies
View Related
Sep 10, 2012
Trying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
View 1 Replies
View Related
Jun 5, 2012
why does my laptop not even show any view wireless networks.In the wireless connection status box, it only says properties, disable but where it should say view wireless networks there is nothing! It is blank. Why is this? And how do I get it to view my wireless networks? I have tried a wireless usb adapter which I use for my other laptop. That usb adapter is comptabile with both WEP and WPA and the computer does not pick up the software. I don't know what else to do.
View 5 Replies
View Related
Oct 6, 2011
Have installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies
View Related
May 29, 2011
I am having some trouble trying to connect to a different network. It seems when I click connect to a network there aren't any networks listed. Now, I know there are networks available near me because I have connected to them before it just seems that now some service or setting is disabled on my laptop that is preventing me from viewing other networks near me. Not sure what it could be but I have tried figuring it out and I couldn't.
View 3 Replies
View Related
Nov 29, 2011
I'm trying to transfer filed from my laptop to my pc but I'm having problems. First of all both comps are running on windows 7 64 bit. Its weird because out of the 4 computers I have in the house, all of them can see each other EXCEPT my laptop, which cant be seen by any other computers, and when I'm on the laptop I can't see any others.I setup a home network with pass protect off, sharing on etc... on my laptop and no other computer can see it. I think somethings up with the connection though. On this computer I'm on right now, my connection sais "network" and not my actualy connection name. On my laptop, (I have a ethernet plugged in, wireless works also, tried both) when I'm connected it sais Bell~ (my internet name). So my laptop shows my internet name even when its connected through ethernet, but my desktop sais network, not the name
View 18 Replies
View Related
Sep 18, 2011
I just bought a WRT54GL which is working perfectly. I needed it to extend my home network for my kids (I have not a very fast internet connection and my kids are eating all of it... With the WRT54GL I can choose how much they can have. So my own network has a netgear modem and a netgear wifi access point which is in this network : 192.168.0.x.
This network is not blocked in any way (just password protected). For my kids network, the WRT54GL gives addresses in this network : 192.168.1.x and is limited in speed. Everything is perfect, I have internet connection on both of my network, There is just the problem that I cannot access my printers, my servers, my computers.... that are on the 192.168.0.x network from 192.168.1.x. Is there a solution ? I already tried to force the WRT54GL to go to 192.168.0.x network but no more connection. Should I "bridge" the two networks ? How can I do it ?
View 1 Replies
View Related
Nov 14, 2012
I'm having an HP laptop with windows 7 installed on it, but cannot view available wireless network. under network and settings i can see the wireless network card, which means the wireless drivers has been installed. but can't view my wireless network but other computers are viewing my wireless network.
View 1 Replies
View Related
Sep 29, 2011
I have a pretty basic NETGEAR router right now. I have a Zyxel modem that Centurylink sent when I signed up for my DSL service. The Zyxel modem connects to my NETGEAR router. When I play online either wireless or wired from the Netgear modem I have major connection issue.However, if I disconnect from the netgear modem and connect from the Zyxel directly to the ps3 I have zero problems.
View 19 Replies
View Related
Aug 25, 2012
My Dell Laptop is unable to access internet through my Netgear wireless router. Other equipment (Lenovo laptop, ipad, iphone, PS3) accessing internet fine through same router. I ran the onboard Dell Wireless WLAN Card Utility. Hardware diagonistics all pass. Connection diagnostics reports:
Radio Passed
Association Passed
Authentication Passed
Local IP Address Passed
[code]....
View 1 Replies
View Related
Jan 16, 2011
I have a laptop that won't find any networks, it did work a few days ago now it's just randomly stopped.Things I've tried;
-Changing the wireless to different channels.
-System restore to a few days before.
-Check and restarted the wzc serice mutiple times.
-Check the drivers are ok.
View 8 Replies
View Related
Nov 21, 2012
We have installed LMS 2.5.We are not able to view TOC(Table of Contents of RME(4.0.3).
View 2 Replies
View Related
Dec 1, 2011
I've been having trouble viewing some Tinypic images. In the top of the browsers it always shows 1x1, and I see nothing at all.
View 2 Replies
View Related
Dec 11, 2011
i am unable to view all the computers in my work group by which sharing is also not working. whenever i tries to open shared folder in other computer this particular message appears ( no network provider accepted the given network path)
View 6 Replies
View Related
Sep 13, 2012
I have an Alienware M17X-R3 and I’ve been experiencing several networking problems with it recently- most importantly that I can’t connect to any wireless network. It detects all the networks in the area, but when I select and try to connect to one nothing happens. I can still use a wired Internet connection, though. “Troubleshoot problems” or “Diagnose” just tells me that I have no preferred wireless networks. When I go to the Network and Sharing Center, the “Set up a new connection or network” button doesn’t do anything. When I go from there to “Manage Wireless Networks” the “Add” button doesn’t do anything.
I’ve tried disabling and enabling my DW1501 Wireless-N WLAN Half-Mini Card, and reinstalling the drivers. I’ve disabled the “Allow the computer to turn off this device to save power” option on all my network devices. I’ve used a system restore. I’ve run a scan with Malwarebytes and my computer had crashed by the time I looked at it again thirty or so minutes later; it had tried to restart but was unable to because there was “No bootable device”. I powered it off and started it up again and it worked fine. I also ran a Superantispyware scan that completed successfully without finding anything and immediately crashed, but restarted normally.
A few other things that may or may not be related:
-When I boot I get a message that says “Could not reconnect all network drives”
-When I booted I used to get a message from GoogleCrashHandler64.exe that said “C:Windowssystem32dbghelp.dll is either not designed to run on Windows or it contains an error.” When I went to msconfig and disabled all non-Microsoft processes under services and startup I no longer got the message.
View 15 Replies
View Related
May 31, 2011
I am unable to view windows 7 HP systems in my network places on a windows server 2003 domain. How do I rectify this?
View 3 Replies
View Related
Oct 14, 2011
I'm going to list out my problem, to make it faster to understand.1] My domain name is registered with a company, X.2] My webhosting is hosted by another company, Y.3] My web developer, Mr. Z is trying to do his bit and upload my website.Here's what happens:Mr. Z tells me that he's not able to upload my website and is getting the error "Connection timed out" and "Could not connect to server" on his FileZilla or something. He also tells me that there is a problem with my domain registry.Now, Company Y tells me that the domain name's A-records has to be pointed to the correct IP address [which is, of course, the webhosting IP I bought.]Company X tells me to login to my account and add an A-record pointing it to the correct IP address. I did that.But still Mr. Z tells me he's getting the same error and is not able to connect to the domain name.Now, when I ping my website on MS command prompt, I get a "Request timed out" error.
View 3 Replies
View Related
Dec 22, 2012
I have been accessing my webmail account everyday for the past 3yrs with not problem until this week. Stopped working mid week. No changes to computers. Have 3 and none will access this site any longer. Just times out. Sometimes I can ping and other times not. Can log onto other networks and access with out any problems. My ISP says it is not their problem. (Site is [URL]).
View 1 Replies
View Related
Nov 2, 2011
I have an XPS 400 Computer window xpm os. Cannot browse on the internet:Its says, unable to view webpage. My connections (modeum/router) seems to be working.Had ISP check an everthing checked out.control Panel shows internet connected.
View 14 Replies
View Related
Jul 15, 2012
My camera saves video as .avi files, but when I open them in Media Player, all I get is sound. The camera works fine, as I can view live video, but the saved files show nothing, just have sound.
View 4 Replies
View Related
Jun 2, 2011
I recently purchased and successfully installed a NetGear N600 dual band router (WNDR3400). My desktop has no connection issues. My iPod Touch has no issues connecting to the wireless network. However, my phone (HTC Aria), my work computer (Dell Latitude D630 Win XP) and my brand new HP Slate 500 (Win 7 Pro) cannot connect to the network. The network is discoverable by all the devices but the 3 cannot connect. I removed all security and still was not able to connect.
I reinstalled the router and still not able to connect. I restarted the router and still not able to connect. The Dell did previously connect to unsecured networks in my neighborhood but does not seem to like my newly set-up network. I am most surprised that the Slate is unable to connect to the wireless network. I would think something brand new would like that would not have an issue. If I cannot get my wireless router working properly and my other computers able to connect to it, it makes them all pretty useless.
View 4 Replies
View Related
Feb 24, 2013
Trying to upgrade netgear router wndr3700v2 software. entered id and password - started upgrading but a window prompts saying Authentication required The server URL] requires a username and password. The server says NETGEAR WNDR3700v2.
View 1 Replies
View Related
May 20, 2012
I am trying to veiw my PIX515e via the ASDM, but I am unable to...Can you review my config and make sure I have everything setup the way it is supposed to?
PIX Version 8.0(4)32
!
hostname pixfirewall
domain-name jkkcc.com
enable password DQucN59Njn0OjpJL encrypted
passwd DQucN59Njn0OjpJL encrypted(code)
View 1 Replies
View Related
May 20, 2012
I am trying to veiw my PIX515e via the ASDM, but I am unable to...Can you review my config and make sure I have everything setup the way it is supposed to?
PIX Version 8.0(4)32
!
hostname pixfirewall
[Code].....
View 3 Replies
View Related
Jun 20, 2011
I just successfully setup my wireless Netgear router to work with my laptop and desktop. I now want to get my iPhone to connect to it as a WiFi connection. It sees the available network after I enable WiFi, but when it tries to connect, it just says "unable to connect" or something after I input the password.
My current password shows in the Netgear router (through 192.168.1.1) in the "passphrase" field under Wireless Settings, and it's cp6s-n3rb-ziav. This is what I put in the password field for my particular network in the iPhone before it tells me it can't connect.
There is an option on the left column in the router for "Set password," but it's just to change it to something else. If my iPhone won't accept the current one, I don't see why it would accept a new one, and then I'd have to go and change it in the laptop, too. Without knowing if that's the issue, I'm holding off on that for right now.
View 2 Replies
View Related
