Trying to upgrade netgear router wndr3700v2 software. entered id and password - started upgrading but a window prompts saying Authentication required The server URL] requires a username and password. The server says NETGEAR WNDR3700v2.
View 1 RepliesI recently purchased and successfully installed a NetGear N600 dual band router (WNDR3400). My desktop has no connection issues. My iPod Touch has no issues connecting to the wireless network. However, my phone (HTC Aria), my work computer (Dell Latitude D630 Win XP) and my brand new HP Slate 500 (Win 7 Pro) cannot connect to the network. The network is discoverable by all the devices but the 3 cannot connect. I removed all security and still was not able to connect.
I reinstalled the router and still not able to connect. I restarted the router and still not able to connect. The Dell did previously connect to unsecured networks in my neighborhood but does not seem to like my newly set-up network. I am most surprised that the Slate is unable to connect to the wireless network. I would think something brand new would like that would not have an issue. If I cannot get my wireless router working properly and my other computers able to connect to it, it makes them all pretty useless.
A friend of mine had a 802.11b netgear router and all of her computers were running just fine on it so she says. She bought and installed a 802.11n router and bought usb adapters for all her computers and all work, except one, a Dell Optiplex 330 that runs Windows XP.Some drivers were missing such as her Ethernet Controller and a chipset driver but I was able to install those from the Dell website. She had not yet bought a new USB adapter for the computer, I tried using my D-Link adapter and I can see the network in the D-Link connection manager but in Windows when I go to view a list of wireless networks, it doesn't show any. I cannot connect to the network from the D-Link connection manager.
View 3 Replies View RelatedI just successfully setup my wireless Netgear router to work with my laptop and desktop. I now want to get my iPhone to connect to it as a WiFi connection. It sees the available network after I enable WiFi, but when it tries to connect, it just says "unable to connect" or something after I input the password.
My current password shows in the Netgear router (through 192.168.1.1) in the "passphrase" field under Wireless Settings, and it's cp6s-n3rb-ziav. This is what I put in the password field for my particular network in the iPhone before it tells me it can't connect.
There is an option on the left column in the router for "Set password," but it's just to change it to something else. If my iPhone won't accept the current one, I don't see why it would accept a new one, and then I'd have to go and change it in the laptop, too. Without knowing if that's the issue, I'm holding off on that for right now.
I have a pretty basic NETGEAR router right now. I have a Zyxel modem that Centurylink sent when I signed up for my DSL service. The Zyxel modem connects to my NETGEAR router. When I play online either wireless or wired from the Netgear modem I have major connection issue.However, if I disconnect from the netgear modem and connect from the Zyxel directly to the ps3 I have zero problems.
View 19 Replies View Relatedabout two days ago my main PC lost the ability to connect to the internet. I'm useing a trendnet tew-687ga adapter and a netgear n600 router. I can't ping the default gatway 192.168.1.1
View 2 Replies View Relatedi am unable to configure my netgear router with my clear modem
View 1 Replies View RelatedMy Dell Laptop is unable to access internet through my Netgear wireless router. Other equipment (Lenovo laptop, ipad, iphone, PS3) accessing internet fine through same router. I ran the onboard Dell Wireless WLAN Card Utility. Hardware diagonistics all pass. Connection diagnostics reports:
Radio Passed
Association Passed
Authentication Passed
Local IP Address Passed
[code]....
Unable to connect to the internet thru router.
Hardware:
Motorola Modem
Netgear N-300 WNR2000v3 router
Dell Vostro 470
I have Windows 7 on Dell N4110. I am unable to connect to my netgear router wirelessly. If i restart the router, it may work for some time but then again gets disconnected. However, i can connect to it through wired connection. Others in my apartment can connect to the router. They dont have windows 7 (they use vista, ubuntu). Its working fine for them. I have tried many things like updating the router, disabling firewall, changing wireless security settings, updating windows but none of them seem to work. My friend who has the same laptop also cant connect when I cant. As soon as my connection is disconnected, his also disconnects.
View 1 Replies View RelatedI'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:
Quote:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSri Guru>ipconfig /all[code]....
One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.
I have a Netgear ProSafe FVS318 wireless router whose login information I have lost. I have attempted to manually reset it using the reset button on the back, and return it to factory default settings (thus resetting the login information to admin/password).I have checked everywhere, including the documentation for the router itself. I have gotten multiple instructions on how to reset it (generally telling me to hold the button down for anywhere from 10 seconds to 30 seconds until the test light blinks or stays solid and then blinks or stays solid again, or telling me to hold down the button while turning it on). None of these methods have worked. The router still will not reset. It never reboots no matter how long I hold down the button, no matter when I release it, no matter what the orange "test" light is doing, and no matter if I begin with the router on or off. It will not reboot and I still cannot login.
The orange "test" light has behaved the same way each time; after 10 seconds, it turns solid, and then begins blinking before turning back off. After 20 seconds, it turns solid, and then turns off. It does this if I hold the reset button down for 10 seconds, regardless of whether or not I release the button after it first turns solid. If I continue to hold down the reset button, it continues this pattern indefinitely, for as long as the button is held. When I turn the router on, it turns solid before turning off, regardless of whether I am holding the rest button down. Its behavior never deviates from the observed patterns regardless of what I do. At no point has the router ever rebooted on its own.The default login should be admin/password, as this information is included on the bottom of the router, and in its documentation.
Firmware downloaded, FW_WRT120N_1.0.06.001_US after pressing APPLY nothing happens after few minutes it says. "There is an error in the Content-type field. Click the Back button to return to the previous page and re-enter the information."
View 2 Replies View RelatedI'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies View RelatedI have at&t DSL.I NEEDED to upgrade my wireless gateway from the 2wire wireless-G gate way that I had.I also have a Netgear WNDR-4000 750N Wireless Dual Band Router.
I know I needed an at&t modem to run my DSL, so I purchased (before reading reviews) a Netgear 7550 Wireless Gateway from at&t (they did not have any "N" single user modems (if there is such a thing).I have read through other posts that it is possible to connect the two and I would not need the 7550 for anything else but a modem (disabling broadcast).
The question is ... do I REALY need to do all this or can I just get away with the 7550?Or will the Netgear WNDR-4000 750N Wireless Dual Band Router, if installed and used, fix some of the issues that other 7550 users have said in other posts?
Wireless ... I have 3 gaming systems, two PC's, a tablet and 4 smartphones.I will be using 3 wired ports ... 1 gaming system, PC, and a blue-ray.
And yes, my 2wire wireless-g gateway ran all these ... not efficiently or reliably, but they all did run.
I have not received the Netgear 7550 yet, just trying to get some opinions on which setup would be better.
My Netgear DGN2200 (Name NetgearCS) won't check for firmware upgrade because it says no connection to internet so unable to connect to the Netgear Servers - Yet this laptop I am currently using (wireless connection is turned off on laptop but not router) is wire connected to this same Netgear router and I have internet connection because I am able to post this enquiry. Note the Netgear DGN2200 router gets its internet connection from my Sky Router and is connected by wire to this Sky Router. FYI my iPhone is connected wirelessly to this Netgear DGN200 router (NetgearCS) and is able to connect to the internet. Do you know why my Netgear DGN2200 cannot check for firmware updates?
View 1 Replies View RelatedIn Room 1 Computer 1 and computer 2 are connected to the Verizon box via ethernet cables using port LAN 1 & LAN 2.In Room 2 I have Computer 3 connected to the Verizon box using Wireless I then added a ethernet cable into Computer 3 that goes into a Netgear box the ethernet cable goes into the Internet port I then run a ethernet cable into port 1 in the netgear box into the Xbox 360 and on computer 3 I bridge the wireless and LAN connection this then lights up the netgear box showing Internet and Gives the Xbox internet connection but Computer 3 shows and will not connection to the internet just that it is on the LAN network.
View 6 Replies View RelatedI have a actiontec Wireless N ADSL Modem/Router Model# GT784WN & netgear n600 wndr3400v2 router that I would like to setup as a Wireless Repeater. I can not seem to get the netgear n600 setup.
View 1 Replies View RelatedMy laptop says i am connected to the netgear but i am unable to access the internet-
View 1 Replies View RelatedHave the DIR-655 Hardware Version A1. Firmware 1.00NA dated Feb 2010. When I try to upload ANY firmware update from the DLINK site, it says that it is not for that device or is corrupt.
View 5 Replies View RelatedI have a DIR-615 Ver. C1 f/w3.00. We have been having trouble with the the signal becoming weak or non-existent, so I decided to see if a firmware upgrade would solve the problem. I have attempted to upgrade to DIR615C1C2_FW301B11.bin and to DIR615C1_FW313NAB09.bin with the same result for both of them - with several attempts for each.
The message I get is: "The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this device, or the uploaded file may be corrupted.
If the uploaded file is correct, it is possible that the device may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a 'user' instead of an 'admin' - only administrators can upload new firmware.
The Gateway will not be reprogrammed."
I have disconnected all other devices to reduce traffic, I have attempted the upload multiple times for 3.01 and 3.13NA, I am logged in as the admin, and I believe the files are proper for this hardware version.
Is there something I am missing that prevents me from performing a firmware upgrade?
I'm currently running ACS 5.3 Patch 7 in a VM on VMware ESXi. I download the application upgrade bundle, and placed it in my SFTP repository, and ran "application upgrade filename repository name". It throws an error that the manifest file is not found in the bundle.
I tried putting the ACS.gz file in an FTP repository, and even in an ISO file to attach to the VM. In all cases I receive this same error.I did verify the md5sum on the file to make sure it wasn't corrupted..
Ever since I updated my wireless NETGEAR WNR1000v2 Firmware to its current Version V1.1.2.28NA I'm unable to connect to the internet with my PSP Firmware version of 6.60. I used to be able to connect up with no problems. I can scan and it sees the connection and i'm able to set the PSP network settings up however when I go to test it it will not connect up.
View 4 Replies View RelatedModem is a Netgear dgn2200
On the modem page with all the settings Under basic settings For connection it says Always Connected The box underneath says idle timeout 5 (that's in minutes)
I am unable to change that number or even get a cursor to appear in that box (I want to change it to a 0 - my internet connection has been dropping out when going idle). I can't right click or anything. That is using Firefox. When I say dropping out, I mean, the 3 computers on the network become unuseable - nothing works and things don't appear to be connected to the internet even though my green ADSL light stays on like it's connected - it is not.
I tried the same modem page in IE, and that box with the 5 in it is still showing 5, but this time it's just grayed out - again, can't be changed. The firmware updates are all upto date (apparently - according to it's check)
Not abe to upgrade the IOS image PIx7.0 from earlier version 6.3 in to my old Pix-525 FO(Secondary unit) license box .
Is it possible to upgrade without Primary unit (Unrestricted License) ?
I would like to upgrade rommon on my Cisco 2801 but this is what I get: [code]The router stops here and I am forced to power off and on again and the upgrade does not succeed.
View 10 Replies View RelatedI am trying to connect to the internet using an external wireless device (Netgear model:MA101), I have managed to install the drivers and my wireless network is coming up as an option! For some bizarre reason when I try and connect the following messages appears: "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try again"I then refresh and try to connect but the message constantly appears I have rebooted my computer in case it needs to reset after installing the driver for the wireless device.
View 2 Replies View RelatedMy dad is using a netgear router DG834G V2 and has no problem until recently. He got a new phone and wanted to connect wirelessly but couldn't remember is network key. After playing around with things he's obviuosley changed something and now has no internet what so ever.
I've tried plugging in the eternet cable and accessing 192.168.0.1 but can't see any problems there. When i am able to get a connection it's local only and Internet explorer can't display web pages. And when i unplug the ethernet cable it doesn't always find the wireless connection, and if it does find it, then i have the same problem as when the lead is plugged in.
His ISP is AOL although he doesn't always access the internet via aol, he'll use IE and i'm trying to get him to give firefox a go.
I have tried disabled both windows firewall and AVG firewall and individually but still keep getting the message internet explorer cannot display webpage.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Dave-PC
Primary Dns Suffix . . . . . . . :
[Code]....
I'm trying to resolve an issue I'm having with connecting a WLC to the access points. I've inherited a net gear WLC and access points. Having redesigned the network and moving the WLC into the data center I am unable to connect to the APs. The APs are on 192.168.0.x addresses and the WLC is on 10.2.0.x address. I am able to ping to the closest switch (the one the APs are actually attached to) but not the the APs themselves.
All other devices are Cisco devices 4006 to 2950. So it goes WLC (10.2.0.33) - 4006 (10.2.0.23, 192.168.0.99) - 2950 (192.168.0.100) - APs (192.168.0.10 - 35). I have OSPF enabled, I am able to ping from the WLC to the 2950. So from 10.2.0.33 to 192.168.0.100, no problem with that. I try and ping from 10.2.0.33 to any of the APs ie 192.168.0.15 and it cannot find it.
I have issue about Wireless controler , i have 2x WS-C3750G-24WS and 1x AIR-CT5508-50-K9 , i have max 50 access point license and i can't upgrading because WS-C3750G-24WS is and of life , can i use AIR-CT5508-50-K9 with 3750G to work together? , mobility and everything....
View 1 Replies View RelatedI just tried to upgrade my Cisco 2600XM router from 12.3-6 IOS to 12.4-25d IOS, but I was unable to start the router with this new IOS.
flash:c2600-ipbase-mz.123-6.bin (old IOS)
flash:/c2600-ipbasek9-mz.124-25d.bin (new IOS)
=================================================================
Output sh flash
=================================================================
System flash directory:
[Code].....
Currently on V1.3.0.5. Looking to upgrade to latest version, however the upgrade firmware page is greyed out. Same under Firefox 9 or IE 8. I have already rebooted router, with no change in behavior.
View 2 Replies View RelatedI have a 5508 wireless controller running version 6.0.199.4 (the image installed when the device was shipped) and I am trying to install by tftp version 7.3.112.0
The issue is when using tftpd32 gets to 82% transfered then fails with the error "% Error: Code file transfer failed - Error while writing output file"