I have a Dell PC from around 2005. I have this router: [url]....All the wires are connected to my PC but I don't get the notification icon, nor is it in network connections window (just my old broadband modem). I don't want to go wireless as such but just use WIFI on my cell/mobile when in the house if I have haven't got my PC on.
View 3 Replies
A friend of mine had a 802.11b netgear router and all of her computers were running just fine on it so she says. She bought and installed a 802.11n router and bought usb adapters for all her computers and all work, except one, a Dell Optiplex 330 that runs Windows XP.Some drivers were missing such as her Ethernet Controller and a chipset driver but I was able to install those from the Dell website. She had not yet bought a new USB adapter for the computer, I tried using my D-Link adapter and I can see the network in the D-Link connection manager but in Windows when I go to view a list of wireless networks, it doesn't show any. I cannot connect to the network from the D-Link connection manager.
View 3 Replies View RelatedBut I am connected to the internet somehow. There is no ethernet cord connected to my computer and the ethernet adapter is disabled. Also, when I add an SSID to my preffered networks list, it appears, but once I click OK, and bring up that same screen, it is no longer there. Yet, I am still connected to the internet. Wireless Zero Configuration is ON, The wireless adapter is ON, I am connected to the internet as I am typing this How do I get Windows to populate those two lists (the preferred wireless networks and available networks lists)?
View 1 Replies View RelatedThere are a ton of posts about this issue, and I have tried everything. I have an ASUS Eee 1040 PC with an Atheros AR5700EG wireless network adapter running on Windows XP. I've had the computer for a couple years and it has worked fine, until recently. Using inSSIDer, I can view all wireless networks within range, but using Windows, I cannot connect to any wireless networks. It gives me the message that "No wireless networks were found in range." I had a few hotspots that I would regularly use and they are not showing up in the list of preferred networks. I know for certain that some of the hotspots that are within range are indeed broadcasting their ssid. I can only connect if I manually add a hotspot as a preferred network and configure it with the correct security settings. Even then, viewing available wireless networks gives nothing, and Windows doesn't remember the hotspot. Here is what I have tried:restarted Wireless Zero Configuration service checked windows files haven't changed using sfc /scannow in a command window updated the driver for the wireless adapter rebooted the computer kicked and screamed
What else can I do short of reinstalling windows?
I have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies View RelatedWhen i first set up my wireless i could see it but couldnt authenicate and connect.I was using fire fox as my browser. I could also see my neighbors network. I downloaded internet explorer and now i cant see either one. i have a program calle dconnectivity doctor and it can see both networks. Iam not a computer whiz .
View 1 Replies View RelatedWhat changed on my Win XP wireless network connections, but I used to be able to see about 5 wireless networks in the neighborhood, including mine. Now it only shows mine. Not that I can connect to any of the others (don't have the security codes), but I find it strange that it used to show all of them, but all but my own have suddenly disappeared. Did I check some setting somewhere (that I can't find now) saying to show only the strongest connection?
View 1 Replies View RelatedI'm working off a three-year old HP notebook, dv-2000 series, running Windows 7 Professional, 32-bit.I suddenly lost wireless connectivity. I can still see wireless networks available - unsecured and secured, five-bar signals - but trying to connect to them fails. This is not a matter of connecting to the network but not having internet access, but rather being completely unable to establish any connection.Troubleshooter says Windows is unable to determine anything. It says check the access point, but I cannot connect to any network - home, starbucks, etc. I have reinstalled both network drivers (ethernet and wireless adapter).I have plugged into a wired connection and updated Windows to the most recent set of updates.I've obviously reset the machine, toggled the wireless, etc.I've reset the TCP/IP stack.I've checked that the WLAN service is running, as well as the DNS and DHCP client services. ipconfig says the wireless adapter has DHCP and Autoconfiguration enabled. Device manager says everything is working fine.
View 1 Replies View Relatedi have linksys network monitoring installed on my pc but have been using windows xp to monitor the network. However, after turning on the linksys monitor yesterday, I cannot go back to windows xp. When i do, I cannot view available wireless connections.
View 1 Replies View RelatedTrying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
View 1 Replies View Relatedwhy does my laptop not even show any view wireless networks.In the wireless connection status box, it only says properties, disable but where it should say view wireless networks there is nothing! It is blank. Why is this? And how do I get it to view my wireless networks? I have tried a wireless usb adapter which I use for my other laptop. That usb adapter is comptabile with both WEP and WPA and the computer does not pick up the software. I don't know what else to do.
View 5 Replies View RelatedHave installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies View RelatedI am having some trouble trying to connect to a different network. It seems when I click connect to a network there aren't any networks listed. Now, I know there are networks available near me because I have connected to them before it just seems that now some service or setting is disabled on my laptop that is preventing me from viewing other networks near me. Not sure what it could be but I have tried figuring it out and I couldn't.
View 3 Replies View RelatedI'm trying to transfer filed from my laptop to my pc but I'm having problems. First of all both comps are running on windows 7 64 bit. Its weird because out of the 4 computers I have in the house, all of them can see each other EXCEPT my laptop, which cant be seen by any other computers, and when I'm on the laptop I can't see any others.I setup a home network with pass protect off, sharing on etc... on my laptop and no other computer can see it. I think somethings up with the connection though. On this computer I'm on right now, my connection sais "network" and not my actualy connection name. On my laptop, (I have a ethernet plugged in, wireless works also, tried both) when I'm connected it sais Bell~ (my internet name). So my laptop shows my internet name even when its connected through ethernet, but my desktop sais network, not the name
View 18 Replies View RelatedI'm having an HP laptop with windows 7 installed on it, but cannot view available wireless network. under network and settings i can see the wireless network card, which means the wireless drivers has been installed. but can't view my wireless network but other computers are viewing my wireless network.
View 1 Replies View RelatedI have a laptop that won't find any networks, it did work a few days ago now it's just randomly stopped.Things I've tried;
-Changing the wireless to different channels.
-System restore to a few days before.
-Check and restarted the wzc serice mutiple times.
-Check the drivers are ok.
We have installed LMS 2.5.We are not able to view TOC(Table of Contents of RME(4.0.3).
View 2 Replies View RelatedI've been having trouble viewing some Tinypic images. In the top of the browsers it always shows 1x1, and I see nothing at all.
View 2 Replies View Relatedi am unable to view all the computers in my work group by which sharing is also not working. whenever i tries to open shared folder in other computer this particular message appears ( no network provider accepted the given network path)
View 6 Replies View RelatedI have an Alienware M17X-R3 and I’ve been experiencing several networking problems with it recently- most importantly that I can’t connect to any wireless network. It detects all the networks in the area, but when I select and try to connect to one nothing happens. I can still use a wired Internet connection, though. “Troubleshoot problems” or “Diagnose” just tells me that I have no preferred wireless networks. When I go to the Network and Sharing Center, the “Set up a new connection or network” button doesn’t do anything. When I go from there to “Manage Wireless Networks” the “Add” button doesn’t do anything.
I’ve tried disabling and enabling my DW1501 Wireless-N WLAN Half-Mini Card, and reinstalling the drivers. I’ve disabled the “Allow the computer to turn off this device to save power” option on all my network devices. I’ve used a system restore. I’ve run a scan with Malwarebytes and my computer had crashed by the time I looked at it again thirty or so minutes later; it had tried to restart but was unable to because there was “No bootable device”. I powered it off and started it up again and it worked fine. I also ran a Superantispyware scan that completed successfully without finding anything and immediately crashed, but restarted normally.
A few other things that may or may not be related:
-When I boot I get a message that says “Could not reconnect all network drives”
-When I booted I used to get a message from GoogleCrashHandler64.exe that said “C:Windowssystem32dbghelp.dll is either not designed to run on Windows or it contains an error.” When I went to msconfig and disabled all non-Microsoft processes under services and startup I no longer got the message.
I am unable to view windows 7 HP systems in my network places on a windows server 2003 domain. How do I rectify this?
View 3 Replies View RelatedI'm going to list out my problem, to make it faster to understand.1] My domain name is registered with a company, X.2] My webhosting is hosted by another company, Y.3] My web developer, Mr. Z is trying to do his bit and upload my website.Here's what happens:Mr. Z tells me that he's not able to upload my website and is getting the error "Connection timed out" and "Could not connect to server" on his FileZilla or something. He also tells me that there is a problem with my domain registry.Now, Company Y tells me that the domain name's A-records has to be pointed to the correct IP address [which is, of course, the webhosting IP I bought.]Company X tells me to login to my account and add an A-record pointing it to the correct IP address. I did that.But still Mr. Z tells me he's getting the same error and is not able to connect to the domain name.Now, when I ping my website on MS command prompt, I get a "Request timed out" error.
View 3 Replies View RelatedI have been accessing my webmail account everyday for the past 3yrs with not problem until this week. Stopped working mid week. No changes to computers. Have 3 and none will access this site any longer. Just times out. Sometimes I can ping and other times not. Can log onto other networks and access with out any problems. My ISP says it is not their problem. (Site is [URL]).
View 1 Replies View RelatedI have an XPS 400 Computer window xpm os. Cannot browse on the internet:Its says, unable to view webpage. My connections (modeum/router) seems to be working.Had ISP check an everthing checked out.control Panel shows internet connected.
View 14 Replies View RelatedMy camera saves video as .avi files, but when I open them in Media Player, all I get is sound. The camera works fine, as I can view live video, but the saved files show nothing, just have sound.
View 4 Replies View RelatedI am trying to veiw my PIX515e via the ASDM, but I am unable to...Can you review my config and make sure I have everything setup the way it is supposed to?
PIX Version 8.0(4)32
!
hostname pixfirewall
domain-name jkkcc.com
enable password DQucN59Njn0OjpJL encrypted
passwd DQucN59Njn0OjpJL encrypted(code)
I am trying to veiw my PIX515e via the ASDM, but I am unable to...Can you review my config and make sure I have everything setup the way it is supposed to?
PIX Version 8.0(4)32
!
hostname pixfirewall
[Code].....
I just bought a WRT54GL which is working perfectly. I needed it to extend my home network for my kids (I have not a very fast internet connection and my kids are eating all of it... With the WRT54GL I can choose how much they can have. So my own network has a netgear modem and a netgear wifi access point which is in this network : 192.168.0.x.
This network is not blocked in any way (just password protected). For my kids network, the WRT54GL gives addresses in this network : 192.168.1.x and is limited in speed. Everything is perfect, I have internet connection on both of my network, There is just the problem that I cannot access my printers, my servers, my computers.... that are on the 192.168.0.x network from 192.168.1.x. Is there a solution ? I already tried to force the WRT54GL to go to 192.168.0.x network but no more connection. Should I "bridge" the two networks ? How can I do it ?
Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
Setup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
We are facing problem with cisco 6506 switch while configuring when we try to save it, we are not able to save the config, neither we are able to view running and startup config.
View 2 Replies View RelatedI am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedRecently, I have found out that my laptop is unable to find any networks. I started using what I believe to be an ethernet cable to connect my laptop to the internet because it was faster than wireless. But when I removed the cable and try to connect wirelessly, the computer states that there are no wireless networks in range. I know the wireless adapter is broadcasting because my sister can connect wirelessly to the internet. My WiFi is on, but I can't find any networks.
View 10 Replies View Related
