i am unable to connect wirelessly my wireless connection is not showing under the available connections and i can onhy connect hardwired via my router i have done simple troubleshooting with no results i have also tried to go to routerlogin.com and .net and i cant access them i have also done the pinging and everything seems to be in order what are my next steps
View 9 RepliesI have a desktop PC where the only internet connection is via a 'USB mobilebroadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN (not connected to internet) and dongle (connected to internet) connections.My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless NetworkAdapter" and "Realtek PCIe FE Family Controller" are both showing without any ?
Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.
I have 3 pc's connected to the router, hard wired in using cat5. When plugging the cable into the router, the router port on front lights up. If I put it in the 3 port, the 3 lights up. If I put it in the #1 port, the port 1 lights up. I believe it means the pc is being detected by the router. If I go to the ip addy for the router (192.168.0.1), it is only showing the pc I am on. The other 2 pc's are not appearing, and they are not able to access the network. If I add a wireless item, like my Iphone, it is detected on the network right away.This only started this morning. I have restarted the pc's, restarted the router, reset the router, moved the cables to different ports, and swapped the cables from one pc to another. The only pc that gets detected in all of this is the one I am on. Regardless of port/ wire.
View 1 Replies View RelatedTwo days ago I booted my laptop and found that I'm not able to connect to the internet via LAN. It didn't detect a connection, even though my cable was plugged in. It was able to detect the wifi networks from my neighbors, but that's not an option, i need the LAN. I changed absolutely nothing,nno updates, downloads, ... It just came out of nowhere.I already eliminated a cable problem, the laptop from my roommate was able to connect without a problem.When I plug the cable in mine, the lights on the port flicker, making me believe that it's not a problem with my port either.it's definitely a computer problem, but I'm not sure if it's my computer or my network adapter that's being a PITA.When I go to the Device Manager, the network adapter (broadcom 802.11g) is fine, no red x or yellow exclamation point. i have already tried turning it on and off, and uninstalling and then rebooting, no avail.
View 6 Replies View RelatedJust bought myself a TP-Link WN722N Wirless Adapter. Currently I have a Netgear WNA3100 connected which works fine but I to use the TP-Link to connect to a second network simultaneously.Here's the problem.The drivers installed just fine for the TP-Link adapter. Windows shows that its connected as a USB device (USB2.0 WLAN) and Network & Sharing Centre shows it is being "Wireless Network Connection 4"(The Netgear one shows as "Wireless Network Connection 2")However, when i try to use the TP-Link one to connect to a network, it doesn't show up in the "Network Connections" menu on the Taskbar, and when i disconnect the Netgear one it says that it can't find any wireless connections at all; note that "Network & Sharing Centre" still shows the TP-Link Adapter as being connected to the PC).Tried Reinstalling the TP-Link Software, updating it, etc. Restarted PC. Disabled Netgear connection. Physically Disconnected Netgear Adapter and still no luck.
View 2 Replies View RelatedI have a cisco 5520 running as IPsec concentrator. On the ASDM homepage is shows like 31 VPN connected. But if I go to Monitor > VPN is show only 18. Then if I use SSH using sh crypto command it shows the same number as on the Monitor > VPN sections. I am running 8.3(1) and ASDM 6.3(1).
View 8 Replies View RelatedMy Ethernet is not showing up in device manager or Network Connections. I've checked the bios and it is enabled. I've also tried to install the drivers, but at the end of the install this error message pops up " the Realtek Network Controller was not found. If Deep sleep mode is enabled please plug the cable"
View 1 Replies View RelatedSo I just installed Windows Server 2003 64 bit on an older HP Proliant DL360 G5 and am trying to connect it to my network but neither of the 2 NIC's are showing up under Network Connections... the only option I am given is the ''Add Network Places Wizard''.
I have an ethernet cable plugged into NIC 1 and the LED's work so I know it's not a bad NIC card- do I have to download drivers for the NIC? Do I download them to a USB/CD and then just boot from that?
my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies View RelatedI've just installed windows xp pro sp 3 on my laptop and am going through installing the drivers for the problem devices. I've got everything installed minus the drivers for the sound card. I'm trying to connect to my wireless network and am not having much luck. I know the network is available because i'm on it right now sending this message. However with this new installation everytime i refresh i'm getting the "No wireless networks were found in range" message. I'm also not getting any yellow question marks in the device manager window for this device. I know the card works because it worked just fine with ubuntu before i wiped the hdd and installed xp ....
View 9 Replies View RelatedFrom last 2-3 days, my wireless icon is not showing up, neither my computer can catch any signal. The led is working fine. Previously, there was no problem. Suddenly everything stopped. Is it dead???
View 5 Replies View RelatedI have added a wireless network on my computer but it isn't visible from the networking connections drop down. Why?
View 3 Replies View RelatedI recently got a toshiba satellite laptop running win xp.. at first when i connected it had internet..but after adding avg antivirus it began showing limited or no connectivity. ran antivirus ... cleaned up system..changed the ip addresses and now it says connected.. but i cannot go to google or any other online page. it says there is no response from default gateway or dns server... not sure what else to do . I tried rolling back system to before i did anything and still the same.
View 6 Replies View Relatedi am trying to connect(internet) my laptop but its is not connecting through WIFI.diffrent ip addresss is showing on a laptop but my ip address is not showing and it is not connecting.
View 1 Replies View RelatedSome background first. Last night I went trolling around for a solution to an ip address conflict message I receive when I try to go onto Xbox live via a network bridge on my laptop. What I eventually ended up doing was going into my tp-link wireless router settings (not sure of the exact model number as I am not home right now) and reserving two different ip addresses for my laptop and my Xbox using their MAC addresses. It didn't appear to do anything ( now I think possibly because my Xbox needs the same ip as my laptop?). Anyways I tried to go onto Xbox live and it worked at the start (as it always does) and then 30 minutes in, the ip address conflict message came up (usually meaning a disconnect from Xbox live is imminent). But I actually ended up staying online for another 3 hours until the Internet crashed.
Upon further investigation I noticed that my wireless network was not even showing up on my computer, my phone, or any of my roommates computers. I went upstairs to check the wireless router and it was seemingly working correctly (i.e. no flashing lights or anything). Not quite sure what to do. I would go back and change the router settings but I don't think I can without a connection to it.
I have a wireless PC laptop and a router that works fine. When I change rooms, there's competition from my neighbor's router and I want to remove it. When I "view wireless networks" I see their connection. When I go to "change the order of preferred networks" (hoping to delete it from there) it doesn't show up. If I go to "change advanced settings" I end up in the same place not showing the neighbor's wireless.
View 4 Replies View RelatedWindows XP on an older Dell Latitude. All wireless settings appear to be on, yet "no wireless networks are found in range" All other devices in the house see the same 3 networks (mine, mifi, and next door), so this is specific to this machine.
Also, I normally keep this laptop docked, 95% of the time, and earlier in the week disabled the wireless (right click on icon, disable) as I normally do when connected to the dock, since it seems to perform faster (no testing, just my opinion)
Other factors: The computer got undocked without normal undock procedure taking place.
Don't know if this is related, but the sound wasn't working either the last few days I have redocked, rebooted, restarted, checked every possible config I can think of, checked the router to be sure that my device was still listed, etc.
I have a desktop with windows Xp and I too have no wireless networks come up in the box on the right hand side, I know the wireless Linsky cisco wifi is working as I have connected it to another laptop with Vista, but have tried everything to get it wireless and nothing works the Desktop works fine when hard wired?
View 2 Replies View RelatedI had a wireless network set up between my Dell D630 and a Del XPS M1210 with IS and worked fine. Then we sold the XPS and got a E4300. I set up a wireless network on it with IS and it also worked fine. Both laptops running XP. The E4300 has SP3 and the D630 was set up with SP2 but I upgraded to SP3. The network was difficult to connect at times so I had to bypass the firewall to connect. Once connected, IS worked fineHowever, latetly it refused wireless connection even though the connection was visible. I have now tried to set up a new wireless between the 2 but it doesn't even show when I refresh the wireless connections in range.
View 1 Replies View RelatedI upgraded WCS to 7.0.22 and the WLC to 7.1.91.0 so that I could add four 3602i's. Funny thing is that they all work fine except that none of their LED's are 'lit' up. They look dead.
Is it the version of sofware?
Wireless extender showing limited connectivity
View 1 Replies View RelatedMy wireless netwok indicator on the bottom of my screen show no connection. It says I need the WEP key.
View 1 Replies View RelatedI have vista installed in my HP m/c.Earlier the 'connect to Networ' list was showing my WIFI nw but suddenly it doesn't show now n the list while other wifi n/ws are still shown in the vicinity.I tied to setip the wireless n/w using 'HP Wireless Assstant' wizard but while I select the routr as Dlonk th mdel shown in the list doesn't show Dir-300 so it gives the message as 'HP network assistant currently doesn't support te router you selected'. What can be done to get wifi in the list of availale networks.
View 1 Replies View RelatedTrying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
View 1 Replies View RelatedI got a DAP-1522 and here is my situation. I have a wireless router connected to the internet downstairs. I want to extend the range by creating a new wireless network upstairs. So I want the DAP-1522 to connect to the wireless router, and then become another access point upstairs.
I was able to connect to the wireless router in the DAP-1522 setup wizard, but nowhere was I able to configure that actual DAP-1522 WIRELESS setup. Nothing ever showed up on the "Wireless Settings". Just "Save Settings" "Do Not Save Settings" and the rest of the screen empty. On the status page it does show it is connected.
Am I doing something wrong or will the DAP-1522 not do this?
I've tried changing the settings on my DLink wireless router, resetting it and my cable modem (by unplugging them and plugging them in again), and even restoring my iPod, but I cannot find my home wireless network! Both my iPod and my PC can find other networks, but not my own.My network is WPA-2 only, which my iPod should be able to see. The cipher type is TKIP. My wireless channel is 2.437GHz (channel 6, I can't change it). I even tried resetting my network settings on my ipod, with no luck.My router is a DLink DIR 615 wireless router and my computer is a PC that runs Windows 7. The router is able to connect to the internet; it's just the wireless portion that isn't working.
View 11 Replies View RelatedWe just installed MSE with CAS (7.0.201.204 software) and everything works fine and clients are shown on WCS floor maps except for Cisco 7921 wireless phones which dont appear in the WCS map.
View 3 Replies View Relatedafter installing xp my wireless card doesnt show in device manager
View 8 Replies View RelatedHaving trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
View 4 Replies View RelatedI've come across an older IBM ThinkPad 2687 via work that was just collecting dust, and it was able to connect to a wireless network.Due to other issues with the machine, I had to do a complete refresh on it, so it only had the XP OS.
I had to update the drivers to make sure other things like connecting to a flash drive, and connecting to a local area was possible, which is how I'm able to connect now.However, I've been unable to access the wireless connection within Network connections. I've downloaded the different drivers from the Lenovo IBM ThinkPad website, but still no luck.
I recently moved and changed computers, but ive been trying to setup my Linksys WRT150N. I had one cable coming from the modem and into the port on the router labeled "internet" and then another cable coming from one of the router's ethernet ports, going into the PC.
I opened a browser and typed in 192.168.1.1 into the address bar and got to the setup page. When I search for wifi using either my laptop or my droid, it shows that there is an excellent signal and will connect to it, but when I try to perform a task that would require internet, it says that there is no internet access.
I have a Toshiba Satellite A665 Model Laptop. Which i bought 2 years back. I got a new wireless Internet connection few days back. but I am unable to use that network in my laptop. I have Windows 7 Ultimate 64 bit OS in my system.
View 2 Replies View RelatedI have a Laptop : Hp Compaq nc6220, My wireless connection is showing but not connecting
View 1 Replies View Related