My son plays Xbox and asked me to investigate settings on my router that will allow him better play on his Xbox LIVE. From what I've found out I need to trigger ports in my router settings.I have a Linksys E3000 router. His Xbox is plugged directly in from the router.
View 3 Replieswe got two xbox 360 at home. the one in my room is wired to the router and the other one is in the other room wireless. Since I bought the EA4500 I been having the NAT problem.I bought it like 4-5 days ago. Before I had the E4200 and it was working fine on both consoles. Yesterday I did the Port Triggering and nothing changed, NAT type does not Open. One of the xbox sometimes has Open NAT Type and the other xbox Moderate NAT Type. I was using Cisco Connect Cloud but yesterday I went back to the classic layout.
View 9 Replies View RelatedHow to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band
View 1 Replies View RelatedI'm having trouble getting our xboxes to show up as open on Xbox Live. I was able to do it for one xbox by assigning static IP and doing port forwarding, but this doesn't work for more than one. I have now done every option I can find and get the same result of moderate NAT no matter what. I have entered the ports in port range triggering, tried UPnP both on and off, filter anonymous internet requests is disabled, filter NAT redirection disabled, and have upgraded the firmware. I don't know if there is anything that can even be done at this point. On a previous router I had this issue was very simple and just had to disable a certain NAT box but with this new one nothing seems to work.
View 7 Replies View RelatedI have a Linksys E3200 and it is connected to the internet by Ethernet cable. Like that is what my ISP gave me. No DSL line or anything like that, just straight up Ethernet cable. I went from having slow internet and connecting to everyone to fast internet and cannot connect to anyone, only when someone that has a open NAT to host it for me even to connect. I have tried DMZ, port forwarding, disabling UPnP and enabling it. Also I can't connect to any of my friends that have the same ISP as me.
View 3 Replies View Relatedhow to open my NAT Type For my xbox.
View 3 Replies View RelatedI have three xbox 360s (mine plus my son and my daughter)...I have my settings set to where when myself and my son are on our 360s our NAT type is open..
View 2 Replies View RelatedI set as the DMZ with a fiber optical setup through a 100MBps ethernet cord.
View 1 Replies View RelatedI just upgraded yesterday to the DIR-655 (ver B1, F/W Ver 2.00NA), and suddenly my sons Xbox 360 complains that the NAT is set to moderate. I'm not really sure what this means, but I've never seen it before and it wasn't an issue with my old router. It pertains to the DIR-655? I did some quick google searches and I've seen lots of different 'solutions' to this issue, but none of them seem to agree with each other and I'd rather not spend and entire afternoon trying one after another given that this router kills my internet connection for a full 20 seconds every single time I make any change.
View 4 Replies View RelatedI have router as mentioned in subject. Games i'm playing most online are assassin's creed brotherhood, assassin's creed revelations and both of them show to me i have moderate nat.Exact message in revelations is:
"Upload
Bad
Your game experience will not be satisfactory, you might will not be able to use voicechat. Try to limit the network traffic to enhance your performances.Second part of this message goes like that:
"Nat classification
Moderate
You will not be able to play or communicate with players who have strict nat."
When i connect internet to my pc directly via ethernet modem (asmax AR801MP) nat is opened.
My ISP is polish Dialog.
How should i configure this router to get in PC games nat opened? I already have firewall disabled. Router's firmware updated to latest available one v1.0.06
I have a v1 WRT54GS And I am currently fustrated. After anouther laptop coming into this house my Xbox Live Functions have locked up from the NAT turning to Moderate. Now I have tried many things to change it but nothing seems to work. I am using the Microsft Wireless Adapter for the 360.
View 9 Replies View Relatedhave one router WRT54G with firmware version v2.02.7, Feb. 27, 2004, and I'm trying to use this router to get my PS3 connected to the internet, but in the PS3 appears that I'm using NAT Type 3 and to enable some online features in my PS3 I must change it to NAT Type 2 (from the router configuration), I tried everything that I found (put my PS3 in DMZ zone, enabling TCP/UDP ports, enabling/disabling UPnP, disabling Media Server Connections in my PS3, etc.) and nothing works,
View 3 Replies View RelatedFor Xbox 360? currently, whether wired or wireless, my Xbox 360's NAT type is strict, and I am unable to do anything online whatsoever. Is there anyways to set up an exception, or anything that can open my Xbox's connection to my router so I can actually use it online?
View 2 Replies View RelatedI have an e4200 and every once in a while a few files on my USB Hard Drive will change to an empty folder. What do I do to change the file back to its original format and what do I do to keep this from happening again later? I have photos that are not replaceable and do not want to lose them?
View 5 Replies View RelatedI have a WRT120N router.it goes alright in connection wise but for my ps3 my Nat type is strict which wont let me join in some of my mate's partie's or host a game. And i REALLY wanna fix it by opening my nat. I've basically tried everything port forwarding but when you save it when port forwarding, it doesn't save like it look's like on the video's i have seen on YouTube.I've done that DMZ thing which also didn't work.I've basically done everything on YouTube and other site's.I'm just wondering if it's just the router. Or just the way i have it all setup because my router is setup in a different room with the computer which is hooked up with the modem and my ps3 is in my room which is a different room and is just connected threw WiFi my connection on the ps3 is wireless obviously.
View 7 Replies View Relatedchanging my nat type to open i have tryed so many solutions and none of them worked?
View 9 Replies View RelatedI dont know or understand how to change my nat type. I have the e3000 linksys router. My ps3 is running wireless off it. I want to change form nat 3 to 2
View 1 Replies View RelatedChanging the NAT Type to open because I can't play with some of my friends on Playstation.
View 1 Replies View Relatedchaning the NAT Type to open because I can't play with some of my friends on Playstation.
View 2 Replies View Relatedhow to change my nat from moderate to open so i can play xbox without any problems. But the weird thing is my nat used to be open but it changed to moderate and i have recently bought the linksys e2000 and it was open at first but not anymore.
View 9 Replies View RelatedChanging the NAT Type 3 to NAT Yupe 2 or 1 because I can't play with some of my friends on Playstation3
my router is: Cisco E4200
I've recently bought a Cisco WRT120N router and, like my previous router, the NAT type on my PS3 console is type 3 which means I can't connect to my friends.Does any one know how to change this? I have not port forwarded or anything, as I'm not sure how and do not want to mess up the router's settings.want to change the NAT type to Open or Type 1.
View 2 Replies View RelatedRecently Ive been having issues with connecting to games on my PS3, Ive been trying to do things like Port Forwarding like I did on my old router but the way this router is set up is extremely different. On this router it seems there is no Port Forwarding it's now Port Triggering and it seems to require more info than Forwarding does.I should mention Im using a Router from Centurylink and I have no Admin powers, I can still go in and do things with ports but how I would change my NAT type or Port Trigger
View 1 Replies View RelatedI'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet
View 4 Replies View RelatedI'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet. it down so I can understand what you're saying.
View 2 Replies View RelatedI just purchased a Linksys WRT120N and have a couple of issues, one of them may force me to return it to the point of purchase.Once WPA2 is enabled, on the Wireless-Advanced Wireless Settings screen,, the Authentication Type (which was greyed out by default) changed from Auto to Open and remained greyed out. I want to change this back to Auto.The other issue is that on the Status screen, the IP addresses of the domain name servers (DNS) are incorrect. This screen displays the DNS server addresses sent by the ISP and are not displaying the DNS addresses that are hard coded on the main Setup screen - although if I run nslookup, the DNS server address displayed in the console window, is the one that is displayed on the Setup screen.
The more important of the two is the Authentication Type being Open and greyed out. If this is something that cannot be changed, then I will be forced to return this for credit as it was the last unit on the shelf. I had reset the router back to the factory defaults and reconfigured it again, but this did not resolve either issue. I'm tempted to think that both issues may be the result of defective firmware, which shows version 1.0.06.
So currently I'm having issues with changing my nat type to open for my ps3. I've tried to use DMZ and port forwarding to change the nat type, but sadly I couldn't get this to work. Most the guides on the forums are for xbox's which wouldn't work for a ps3. Any handy guide to change my nat type to open for my ps3?
View 5 Replies View RelatedI have an E1000 that is connected to my main computer via Ethernet and have found that it crashes almost every time I run a particular type of operation.I'm testing software and running PHP scripts that invoke cUrl to fetch data from a few different web services via SSL. I would say that at least every other time one of these operations begins, the router crashes -- I am unable to ping its internal IP and I have to power-cycle it to get back up and running.
I don't experience the crashes in any other context and I use the router all day long. I'm one release behind on firmware but the release notes on the most recent version don't suggest that upgrading would make any difference -- no mention of any bugs fixed, for example.
I have an E1200 and its been doing wired things like disconnecting itself randomly and i also need to set it so that the NAT type is open
View 1 Replies View RelatedI have a WRT54G ver.5.(just did latest firmware) and a Buffalo Air Station wireless gaming adaptor.I have gone and port fowarded the UDP 88,UDP 3074,TDP 3074 I believe I have left the UPnP on (brother in law says not an issue)(?) On my XBOX 360 i have the IP & DNS set to Auto, and I get an OPEN setting on my NAT.But when I play online (Halo 3) I can't join any of my friends' parties,acting like it is STRICT. When I set up my IP & DNS to Manual and put in static IP & DNS, I run the tests and get STRICT. It seems to me that even though my NAT "says" its OPEN, it is really on STRICT.
View 4 Replies View RelatedI'm having a very difficult time getting my WRT54GS to work with my Westell 6100 modem. I've been bouncing around gathering info, and what I've learned is that the goofy way CenturyLink tech support told me to hook up my old wired router (modem line into outgoing (LAN) router port) is because the Westell 6100 is a "smart modem/router". Therefore, when I run the Linksys setup CD, it sees the modem as a router, and won't properly configure. I've also learned that the Westell modem can be "dumbed down" into simply a modem by putting it into "bridge mode", which is where I'm at right now - trying to get it reset to factory defaults and resetting the connection type from PPPoE to Bridge. In the meantime, I also reset the WRT54GS to factory defaults, and now I've got another problem: the router will not allow me to set up encryption. The default setting is "Disabled", and when I click the down arrow and try to make any selection at all (preferred selection is WPA2 Personal), it reverts to Disabled. I've also tried to change the router's IP address to 192.168.2.1 (and alternately to 192.168.1.253), so it won't conflict with the modem's IP, and it freezes up every time I try.
View 2 Replies View RelatedI cannot get my xbox to be able wrt54g . Device on comp does not read xbox yet xbox piccks up router
View 4 Replies View RelatedI have the Cisco E3200 and when I turn on my two Xbox 360's ones NAT Type is open and the other is moderate. How do I get them both open? Im constanaly getting disconected on the moderate one. I have not changed any settings in the router it is a basic auto install.
View 5 Replies View Related