i have and original xbox 360 hardwired to my linkisis router. i can use xbox live silver with all the game marketplaces and all that but when i have gold and try to go on multiplayer it says xbox liv servers are unavailible. my internet provider is xplornet and i have avg anti virus on my laptop
View 1 RepliesMore often than not, when my son wants to play on Xbox Live, the Xbox won't connect to Xbox Live. It will connect to the network and the internet but not Xbox Live. After running the connection test, the suggestion is to reboot the modem and router. It works after rebooting those two devices. Why does this happen so often?
View 8 Replies View RelatedIt worked fine for my PC's and Xbox, but I had disconnected my router for a while, plugged it back in and my xbox simply cannot receive any connection. I should also note that I use an ethernet cord (I don't use it wirelessly) and it has nothing to do with the ethernet cord (I've tried several). Using network magic, it does confirm that a connection to the game console and the router.I've looked through the forums and all of what I found, are NAT problems/issues or fixing a wireless issue, but not an issue when using an ehternet cord.
View 1 Replies View RelatedI have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
View 9 Replies View RelatedMy xbox has got a full signal but wont connect to xbox live.
View 1 Replies View RelatedI have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either. What I can possbily do or what might be the problem as to why I can't get my NAT opened?
View 1 Replies View RelatedI have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either.
Why I can't get my NAT opened? Right out of the box, my NAT has always been strict. I'm thinking about returning all of my settings back to default and then trying everything over.
How I can block out Xbox Live at certain times? I want it to shut off at 9 pm cause sometimes I work late and my daughter cannot tell time. I do know which ports I need to block but when I put it in the blocked services and put it the allow time, it still blocks it all the time. I have the wireless router with speed boost but no version.
View 5 Replies View RelatedI have a problem when trying to connect my Xbox to the internet. When I run the Xbox Live conection test it connects to the network just fine, but when trying to connect to the internet it comes up with this message,Your console is not receiving ICMP responses properly.' The internet is working fine on other computers in the house.
View 3 Replies View RelatedWhy I can't play online on xbox live. I'm set on going online but when I go on to play online for MW3(Modern Warfare 3) my NAT Type says strict,I can't join any of my friends games. It says to go on infintyward.com/Nat and when I do it doesn't show my model of linksys (WRT300N) i reset my xbox,my router and still nothing
View 3 Replies View RelatedI have a Linksys E3200 and it is connected to the internet by Ethernet cable. Like that is what my ISP gave me. No DSL line or anything like that, just straight up Ethernet cable. I went from having slow internet and connecting to everyone to fast internet and cannot connect to anyone, only when someone that has a open NAT to host it for me even to connect. I have tried DMZ, port forwarding, disabling UPnP and enabling it. Also I can't connect to any of my friends that have the same ISP as me.
View 3 Replies View Relatedhow to open my NAT Type For my xbox.
View 3 Replies View RelatedI'm not having an NAT issue, but my e2000 is constantly disconnecting from XBOX Live. About every 3-5 minutes I get disconnected. My wireless is working perfectly, this is only an issue with XBOX Live.
[code]....
and I have double checked every setting. I've set the MTU, unchecked UPnP, entered port forwarding range to XBOX's static IP address, and set the DMZ to my XBOX's MAC address. So, what is causing my router to constantly disconnect?
I just recently upgraded my router from the WRT160n V3 to the E3000. I had to port forward from my old 160n to get my NAT settings from Xbox Live set to OPEN. When I switched out the router to the new E3000, my Xbox Live settings went back to Medium (Moderate). I assumed this would happend since its a new router/setup.
setup my E3000 and Xbox Live so I can have my NAT settings to OPEN? I only need to setup 1 Xbox.
we got two xbox 360 at home. the one in my room is wired to the router and the other one is in the other room wireless. Since I bought the EA4500 I been having the NAT problem.I bought it like 4-5 days ago. Before I had the E4200 and it was working fine on both consoles. Yesterday I did the Port Triggering and nothing changed, NAT type does not Open. One of the xbox sometimes has Open NAT Type and the other xbox Moderate NAT Type. I was using Cisco Connect Cloud but yesterday I went back to the classic layout.
View 9 Replies View RelatedI Have a WRT160Nv2 and I am trying to get my nat to become unstrict for xbox live. I have tried port fowarding that has not worked. I tried this site [URL] and that didnt work(I only have one xbox 360 btw). Nothing has worked for me and every time I mess with something it screws up the internet so I have to set it up to the previous defaults. I know how to access my router I just need to know what to enable, disable, or add to the router.
View 1 Replies View RelatedI just bought a new television so thought I would finally be able to get to play xbox live in a television away from the router! But of course like always there is is problems....
I'll start off by saying I understand about bridging your pc's wireless connection to the router and the wired connection from the xbox to the pc. I did the same thing last year with my old laptop and it worked fine.
However the problem lies in that my computer isn't recognising the xbox as a network device atal! They are connected using an ethernet cable (and the orange light comes on at port when xbox is turned on) but the only thing showing up in networked connections folder on the pc is the actual internet!
I had read that sometimes an ordinary ethernet cable isn't enough and it must be a cross over cable used to connect the pc and the xbox, so went into the shop today and purchased an adaptor that changes the cable to a cross over... but still nothing is showing up.
My computer is fairly top of the range, windows 7 and uses a netgear usb network card.
I've been having a strange intermitent problem with my E1500 wireless router. When we first bought and installed it everything was working well with no known problems. After several months no one using the router was able to access certain websites as well as a game server that we play on. No one had made any changes to the router settings and I assumed at first that it was an ISP problem. After talking with our ISP tech support they finally suggested plugging my PC directly into the modem rather then the router. I did and found that the websites and servers that previously wouldn't connect while using the router were now reachable. Any changes to the router settings since installation.I decided that just in case someone unauthorized had made changes to simply revert the router to factory settings and reinstall the software. After doing this I found that I could again reach the websites and servers that I previously could not. So time went on with no problems until a few months later when the same websites and servers were again unreachable by anyone on our router. I again reset the router to factory settings and changed passwords as a precaution, but this time the websites and servers were unreachable even though I had just reset the router.
View 7 Replies View RelatedI currently cannot connect to any game servers or sync my internet time or anything of the sort. I also cannot seem to P2P.
View 3 Replies View RelatedI've got an Open NAT but there's still some people i can't connect to (Xbox Live), i know theres a UPNP but it doesn't seem like it's doing anything.
View 1 Replies View Relatedmy laptop was used by my Mother, So when i got back The anti virus guard got unknown error Avira free vers, and i had services.exe infected, and i had already found a way to clean it it, by renaming services.exe to services.bak and putting another computers services.exe.
[code]...
Living in a student house in the UK, under Orange ISP in central Manchester. My 5 housemates are connected wirelessly to the same router, and are all receiving much faster download speeds (2 megabytes per second etc), and consistant connections than mine (which goes up to 2 megabytes per second, to under 1 kilobyte), yet they may be further away in the house etc.My wireless connection speed varies, changing every second between parameters 54.0mbps, to 1mbps, and ping on ventrillo VoIP software going between 16 and believe it or not, 16,000. I've tried changing the wireless channels, but still no luck, as for connections to game servers, my internet is so bad I can't tell if I've got to do port forwarding/triggering (something along those lines), or if it's just too awful to connect full stop. I'll get to a log in screen, some games like HoN, it will say connecting to server, and appear to time out, nothing happens. Guild wars 2 however logs in, however the second I appear in-game it freezes and lags out.I've contemplated getting a powerline adapter, however if everyone else is getting better wireless speeds and having no issues what-so-ever, it may be on my PC's end, and I'll have wasted £30. A 20M ethernet cable isn't practical either, as student houses have forced closure fire doors which would chew the cable to bits in days, and if a drunk housemate tripped over it on the stairs, they'd rip the back of my PC out...
View 1 Replies View RelatedSo our last router (Linksys) quit on us the other day so we got this one. We plug it in and it works most of the time, but the connection drops out periodically. Also, for some reason, I am now unable to connect to Xbox Live using my laptop as a router (plugging the ethernet cable from my xbox to my laptop). Also, when I plag it in, the internet stops working on my laptop and I have to restart it to get it to work again.
View 1 Replies View RelatedIve been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
Basically sometimes I suffer from serious lag! I want to best setting to get the most out of my modem. What are the reccomended setting for this modem?
View 1 Replies View Relatedi recently had att u vesre installed at my house with a 2 wire 3801 router/ modem but i cant get my xbox 360 online. how to configure the router for the xbox 360 so i can play xbox live.
View 1 Replies View RelatedI have tried everything, port forwarding, switching wires, and resetting my router. NOTHING WORKS! I get disconnected every 15 minutes and i can even send messages to people.
View 1 Replies View RelatedI got threatened by a few people for being good and my xbox live has been disconnecting a lot today and i've been unable to finish a game. then I looked into my router settings and saw this... 79 TCP- or UDP-based Port Scan So that means 79 times it did that, which is weird when you look at the rest of the router numbers.
View 1 Replies View Relatedhow do i find my WEP/WPA/Security Key for my wireless router to set up XBOX Live?
View 1 Replies View Relatedblocking the ports and all that but that only works if the person is not connected and then attempts to connect.Looking for a way to disconnect while connected and blocking ports does not do that.I had a way where if I paired blocking ports with blocking certain websites xbox live uses it would kick xbox live off right away. Unfortunately I lost those sites.
View 7 Replies View RelatedI have CISCO DPC3825 router and theres about 3 computers and 2 wireless devices using internet through it. When i connect to a online video game I get these mini-disconnects. It happens periodically and frequently I'm not sure what is causing it.
View 1 Replies View RelatedWhen someone goes into a game (e.g. Minecraft) instead of typing an IP to join a game they simply type in [URL] and then the server gets added just the same as if you typed in an IP (123.456.789 sorta thing)
My friend used to do this on his website and it worked across multiple games, so people only entered his website and didnt need to remember the IP. if you type in [URL] in minecraft then u can add that server without the IP, thats what i mean.
I'm having an issue with my wireless connection.I was connected fine to my wireless internet on my desktop perfectly fine. I then attempted to connect to Xbox live at this time and that also worked fine.The connection began to get a little flaky (kept losing connection) so I reset my modem while they were both still connected.When the modem came back neither was able to connect.My other laptop, iPhone, and iPad also can no longer connect to the wireless.Windows troubleshooting tells me my DNS server is no longer responding. I'm assuming the desktop connection and Xbox connection are trying to connect to the same thing due to my reset, but I can't figure out how to fix it.
View 3 Replies View Related