Linksys Wireless Router :: E3000 Open NAT Settings For Xbox Live?
Apr 24, 2010
I just recently upgraded my router from the WRT160n V3 to the E3000. I had to port forward from my old 160n to get my NAT settings from Xbox Live set to OPEN. When I switched out the router to the new E3000, my Xbox Live settings went back to Medium (Moderate). I assumed this would happend since its a new router/setup.
setup my E3000 and Xbox Live so I can have my NAT settings to OPEN? I only need to setup 1 Xbox.
View 9 Replies
ADVERTISEMENT
Apr 7, 2011
how to open my NAT Type For my xbox.
View 3 Replies
View Related
Feb 17, 2012
I have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either. What I can possbily do or what might be the problem as to why I can't get my NAT opened?
View 1 Replies
View Related
Nov 16, 2011
I Have a WRT160Nv2 and I am trying to get my nat to become unstrict for xbox live. I have tried port fowarding that has not worked. I tried this site [URL] and that didnt work(I only have one xbox 360 btw). Nothing has worked for me and every time I mess with something it screws up the internet so I have to set it up to the previous defaults. I know how to access my router I just need to know what to enable, disable, or add to the router.
View 1 Replies
View Related
Nov 24, 2011
I have three xbox 360s (mine plus my son and my daughter)...I have my settings set to where when myself and my son are on our 360s our NAT type is open..
View 2 Replies
View Related
Jul 10, 2011
Basically sometimes I suffer from serious lag! I want to best setting to get the most out of my modem. What are the reccomended setting for this modem?
View 1 Replies
View Related
Jul 9, 2012
i recently had att u vesre installed at my house with a 2 wire 3801 router/ modem but i cant get my xbox 360 online. how to configure the router for the xbox 360 so i can play xbox live.
View 1 Replies
View Related
Jul 2, 2011
I have tried opening the ports on xboxs website. tried dmz. tried both. i have a basic understanding of changing your xboxs ip.i have disabled windows firewalls and got rid of macafee altogether.
View 10 Replies
View Related
May 23, 2012
I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies
View Related
Sep 9, 2012
More often than not, when my son wants to play on Xbox Live, the Xbox won't connect to Xbox Live. It will connect to the network and the internet but not Xbox Live. After running the connection test, the suggestion is to reboot the modem and router. It works after rebooting those two devices. Why does this happen so often?
View 8 Replies
View Related
Nov 29, 2011
I have a E1000 and already for the longest time I've been trying basically everything possible to get my NAT open from being strict.I've looked around and tried everything I came across including the port forwarding. The only thing different from what I have and from what I have seen is that my router's ip is 192.168.0.1 instead of 192.168.1.1 that everyone else seems to have. I don't know if that affects my NAT in any certain way either.
Why I can't get my NAT opened? Right out of the box, my NAT has always been strict. I'm thinking about returning all of my settings back to default and then trying everything over.
View 9 Replies
View Related
Sep 23, 2012
It worked fine for my PC's and Xbox, but I had disconnected my router for a while, plugged it back in and my xbox simply cannot receive any connection. I should also note that I use an ethernet cord (I don't use it wirelessly) and it has nothing to do with the ethernet cord (I've tried several). Using network magic, it does confirm that a connection to the game console and the router.I've looked through the forums and all of what I found, are NAT problems/issues or fixing a wireless issue, but not an issue when using an ehternet cord.
View 1 Replies
View Related
Apr 3, 2007
How I can block out Xbox Live at certain times? I want it to shut off at 9 pm cause sometimes I work late and my daughter cannot tell time. I do know which ports I need to block but when I put it in the blocked services and put it the allow time, it still blocks it all the time. I have the wireless router with speed boost but no version.
View 5 Replies
View Related
Sep 7, 2012
I have a problem when trying to connect my Xbox to the internet. When I run the Xbox Live conection test it connects to the network just fine, but when trying to connect to the internet it comes up with this message,Your console is not receiving ICMP responses properly.' The internet is working fine on other computers in the house.
View 3 Replies
View Related
Jan 15, 2012
Why I can't play online on xbox live. I'm set on going online but when I go on to play online for MW3(Modern Warfare 3) my NAT Type says strict,I can't join any of my friends games. It says to go on infintyward.com/Nat and when I do it doesn't show my model of linksys (WRT300N) i reset my xbox,my router and still nothing
View 3 Replies
View Related
Mar 5, 2012
I have a Linksys E3200 and it is connected to the internet by Ethernet cable. Like that is what my ISP gave me. No DSL line or anything like that, just straight up Ethernet cable. I went from having slow internet and connecting to everyone to fast internet and cannot connect to anyone, only when someone that has a open NAT to host it for me even to connect. I have tried DMZ, port forwarding, disabling UPnP and enabling it. Also I can't connect to any of my friends that have the same ISP as me.
View 3 Replies
View Related
Jan 5, 2012
I'm not having an NAT issue, but my e2000 is constantly disconnecting from XBOX Live. About every 3-5 minutes I get disconnected. My wireless is working perfectly, this is only an issue with XBOX Live.
[code]....
and I have double checked every setting. I've set the MTU, unchecked UPnP, entered port forwarding range to XBOX's static IP address, and set the DMZ to my XBOX's MAC address. So, what is causing my router to constantly disconnect?
View 6 Replies
View Related
Jul 30, 2012
we got two xbox 360 at home. the one in my room is wired to the router and the other one is in the other room wireless. Since I bought the EA4500 I been having the NAT problem.I bought it like 4-5 days ago. Before I had the E4200 and it was working fine on both consoles. Yesterday I did the Port Triggering and nothing changed, NAT type does not Open. One of the xbox sometimes has Open NAT Type and the other xbox Moderate NAT Type. I was using Cisco Connect Cloud but yesterday I went back to the classic layout.
View 9 Replies
View Related
Nov 29, 2007
I have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
View 9 Replies
View Related
May 24, 2011
i have and original xbox 360 hardwired to my linkisis router. i can use xbox live silver with all the game marketplaces and all that but when i have gold and try to go on multiplayer it says xbox liv servers are unavailible. my internet provider is xplornet and i have avg anti virus on my laptop
View 1 Replies
View Related
Nov 7, 2007
I have a WRT54G ver.5.(just did latest firmware) and a Buffalo Air Station wireless gaming adaptor.I have gone and port fowarded the UDP 88,UDP 3074,TDP 3074 I believe I have left the UPnP on (brother in law says not an issue)(?) On my XBOX 360 i have the IP & DNS set to Auto, and I get an OPEN setting on my NAT.But when I play online (Halo 3) I can't join any of my friends' parties,acting like it is STRICT. When I set up my IP & DNS to Manual and put in static IP & DNS, I run the tests and get STRICT. It seems to me that even though my NAT "says" its OPEN, it is really on STRICT.
View 4 Replies
View Related
Jul 15, 2011
I bought the E3000 last year and have no problems until recently. My room is about 25-30 feet away from my router and I've been getting a low wifi connection in the last month. I get an average connection on my laptop and a very low connection on my Xbox, both of which are in my room. My question is, what could I do to increase the reception in my room? Could I do anything to my router? Is it overheating(I don't think it is)?
View 4 Replies
View Related
Aug 31, 2010
So I just setup my new E3000, upgrading from a WRT54G. The uPnP worked great on that router and my last three routers before that. Xbox never required I setup anything -- I can prove this simply by swapping routers and putting one of the old ones in place of the E3000.However, the E3000 (Firmware Version: 1.0.02) is not working with uPnP. Xbox connectivity test comes back and says that my NAT type is "Moderate". Most stuff works fine, but I'd like to get it all working. I worked with a Linksys tech who got NAT to "Open" by configuring triggered port forwarding. I am happy to have my issue resolved, but confused why uPnP didn't work? I mean it was easy for me to configure port forwarding, but for my less technical friends, should I simply not recommend this router because it can't do basic uPnP?
View 2 Replies
View Related
Jan 28, 2011
I got a new Xbox 360 Slim and he has it connected through wireless, and His older Xbox 360 connected through Ethernet. And well we would like to play some games online without some major lag. So is it possible to have an Open NAT with two Xbox's within the same network?He has a Linksys Wireless-N Broadband Router WRT160Nv3.
View 5 Replies
View Related
Aug 13, 2012
I'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.
View 1 Replies
View Related
Oct 31, 2011
I¨ve got an E3000 linksys (Sisco) router, but have some problem with the ICMP. I know this because I can not get access to the ports I'm opening from LAN pos. in the NAT setting. I'm running a windows 2008 server with my own homepage on and a FTP server.
View 4 Replies
View Related
Apr 9, 2010
I am at my wits end with cisco and linksys. I have had three different linksys routers over the years.I have a WRT160N, and now I think I made the mistake of buying cisco's latest product E3000. I thought by now their Upnp would be worked out for 180 dollars. But sadly no even their most expensive latest product doesn't do what I want. All I want is to hook up two xbox 360s and have open NAT which is what NAT is supposed to do. Still the NAT does not open up for both systems simultaneously which is absurd. I have a sb6120 for a modem. Both xboxes are hardwired to the router. Upnp should be enabled as this is part of the router. Also its job should be able to handle the two xboxes properly with one ip address that is its sole purpose.
I've tried one in dmz the other with static ip with forwarded ports that equals one open one strict.I've tried upnp enabled alone that equals one open one moderate.I've tried everything else the plan and simple fact is that it should work with upnp on and the nat in the e3000 will take care of the allocation of renaming ports to the single external ip address. By definition.
View 9 Replies
View Related
Dec 9, 2012
I have been using Linksys routers for quite some time now, and recently made a big upgrade from the WRT54G to the E3000. I am familiar with the 192.168.1.1 interface and its functionality. However, I recently noticed a problem: when I set a port to forward traffic to any IP address on my network and then check whether or not it is actually open (url...), I am told that the port is still closed. More interestingly still, the first port that I forwarded when I first got the router is listed as open, but the other half dozen or so are still considered closed. I have been trying to set up a file transfer protocol (FTP) server, but can't even get traffic to forward from port 21! I even tried using the pre-configured FTP drop down on the Applications & Gaming tab, but to no avail. Has anyone had similar issues, or perhaps an idea as to why only one port is forwarded when I have followed the same steps that I have been using for years?
I tried to get in touch with Technical Support about this issue, but was told that I needed to purchase a $30 subscription in order to qualify for assistance. I don't think that I should have to pay $30 to know why the same steps work with some ports but not with others.
View 9 Replies
View Related
Jan 27, 2012
I have the E3000 and have attched a WD 1TB USB drive. I set it up for FTP and Media sharing and it worked fine but somehow recently I could not connect anymore. I checked the router and all of my setting for the FTP and Media server were gone. The disk drive still shows avaiable but now it shows the entire 1TB free (it was at least half used). This is the second time this has happened, first I tjhought it was a bad disk and replaced it but now it happened again. I did do a power cycle some time ago but I remember it still work after that. Not sure why I am losing my settings. This does not give me a comfort level as to storing anything valuable on that drive.
View 1 Replies
View Related
Nov 15, 2012
Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
View 4 Replies
View Related
Nov 28, 2011
i am trying to port forward my router so that i can run a minecraft server. When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't. I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds. None of this works.
View 2 Replies
View Related
Dec 25, 2012
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies
View Related
Mar 10, 2011
My xbox has got a full signal but wont connect to xbox live.
View 1 Replies
View Related
