How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
View 7 Replies
I run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.
View 1 Replies View RelatedI had an SMC router before, and I replaced it with this new D-link DIR-655, The problem I am now having is that I used to visit a web based e-mail /OWA Outlook Web Access, After I VPN to my company, but now with this new D-Link after I VPN, I lost the capability of accessing my OWA to read my e-mail
View 1 Replies View RelatedOne of my remote office router model is Cisco 2801. Unfortunately I forgot the telnet/vty password of that router. I am sitting 500 KM distance in between in the Head Office. I can ping the router but due to lost password I cannot login to the router. Moreover I dont have snmp enabled in that router. Is there anyway I can reset the router's password remotely from my head office. Additionaly I have a switch directly connected to the router and I can ping and login to the swtich but not the router. I am writing this about the switch or resetting the routers password anyway.
View 1 Replies View RelatedI'm the IT Manager for a Small Non-Profit Organization(facilitating build homes, giving education, health care for the poor).All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even if I'm outside the office.
View 5 Replies View RelatedI've just setup my router and dvr system. I have my DVR wired to a Linksys E1200 router. At home view by using url....it then prompts me to log in and voila I can view. I tried setting up the port forwarding although I'm not sure if I did it correctly or not. I got onto my routers webpage. Went to "applications & gaming" Named port, selected both, put in DVR's ip address and clicked save. Came to work and tried to view it and I just get the "cannot load webpage" page.
View 18 Replies View RelatedI have set up the workgroup and named each other and now i can see the file shared from my XP laptop and Windows 7 and it shows me that communicate with PC is OK.But throught the Remote I typed the computer name as mentioned on Remote and it says This computer cant connect to the Remote Computer.
I just want to remote the computer locally in the same network. when i browse for to remote PC and tried to click workgroup but the error appear as do not contain terimal servers.
I have tried to apply system image(present on local system )to a remote system using file sharing with imagex.exe , but it dint work.
View 2 Replies View RelatedMy work has a main office and a backup office which is off site. What I am trying to do is copy a folder from one computer at the backup site to another computer at the backup site, all while sitting at my computer in the main office. Let's say the two computers at the backup site are called comp1 and comp2.Whether I use Windows Explorer, or .net VB script, or XCOPY from the command prompt, if I try to copy \comp1c_drivefolder to \comp2c_drivefolder from my computer then it takes an extremely long time - around 5 hours for 2Gb of data.
However, if I Remote Desktop into comp1, and from that machine copy C:folder to \comp2c_drivefolder then it only takes 5 minutesI can only assume that when I try to copy the folder from my computer remotely that it is transferring the data from comp1 -> my computer -> comp2, and with the computers being at different sites it's very slow. What I need to know is if I can do this remote copy using VB without the data going via my computer, i.e. straight from \comp1 to \comp2.
I thought this was the way Windows handled copying between networks anyway, i.e. straight from one to the other, my only explanation for the terrible speed is that it is going via my computer. I'm writing a basic folder-backup program in VB and would REALLY like to cut that 5 hour transfer time down to the 5 minutes I know the network can do
I am trying to transfer files from Laptop A to Laptop B. I can transfer files from B to A, but I can't transfer them from A to B. When I try to, I get an error message saying "Windows cannot access Laptop A".It then gives me the option to diagnose the problem (I'm using Vista on both laptops, by the way). When I click that, it gives me the error of "Cannot communicate with Laptop A. We pinged the remote host but did not receive a response".Laptop A is connected to the network according to it, it can access the internet fine and can access other laptops on the network fine. I have disabled the firewall, shared the folders appropriately, made sure they were both on the same workgroup (they are both on the default Vista WORKGROUP), and still nothing.
View 19 Replies View RelatedMy home network consists of a Linksys WRT54GL router running DD-WRT supplying wired access to my desktop, a bridge to another WRT54GL (also running DD-WRT) to provide a wired connection to a XBOX upstairs, and wireless access to about 5 or 6 different devices including several laptops, an iPad, and an iPod touch. My question is this:
I am adding a 22" TV into my office so I can watch TV while working on my desktop. I only have one cable jack in my office which is currently plugged straight into my cable modem. This means I'll have to use a splitter to give both my TV and modem cable access. How much signal degradation or speed do I stand to lose or should expect to lose?
I was into IBM iSeries all these years (15 years) and just got into Microsoft Programming(.NET) I have done a program in csharp.net which gets input from the users and dump it into a database. 50 users are going to do the data entry with just one database. As I dont have much knowledge on sharing/accessing applications/database in a network environment (PC based).
View 1 Replies View RelatedMy workplace currently has one AD Forest. Slowly we have drifted in to two slightly separate businesses and my boss wants us to create a new AD Forest and segregate the users doing each business. Although we will all be in the same office, each side will authenticate to a different DC. The problem is, that we have some resources that still need to be shared and I would like to share them as eloquently as possible without converging the networks too much. The two networks will be in the same server rack but they will logically appear as this:Forest1.local (original)
-Cable Internet -- Router A (192.168.1.x) -- 48-port switch A -- PC/Phones/Domain Controller AForest2.local (new)
-Cable Internet -- Router B (10.1.1.x) -- 48-port switch B -- PC/Phones/Domain Controller B.
The problem I have is that the users in the "new" network need access to a shared folder, shared customer DB, and shared printers on the original Domain Controller, named "DC A" above. I have complete control over both networks but cant figure it out the best way.My main concern is physical access between the networks. How will a pc on the 10.1.1.x network know where printer 192.168.1.2 is? I thought about creating a forest trust in order to assign proper permission but how will they resolve the names on a different subnets? The two "routers" are just simple SOHO type routers so I cant do much there. I thought about connecting the two switches together but don't know if that would work. Wouldn't the data just get passed to the default gateway (router) anyway. The router would then just drop it. I also though about using the 2nd NIC in each DC and connecting them in each other's subnet. But again Im not sure if it matters if the DC's can reach each other or if the PC's would have to be able to reach the other subnet etc. I also thought about just creating some kind of VPN (hamagachi) or whatever to go out into the internet then back into the other router to the network.The problem is wouldnt every computer wanting to access the shared folder have to have this setup. I would like to limit setting things up on workstations and just limit config to the DC's if possible.I basically just want users in subnet two to be able to map a drive and access printers on DC in subnet one.
I wanted to setup a home network for primarily sharing my music, pictures and videos.I have a PS3 which can stream the video/music and display the pictures from a media server to my TV.I was wondering between NAS and a desktop computer? and wanted to know which was the better or cheaper solution? (2 much 2 ask for both)
Main Issues
--Will NAS work with PS3?
--Incase of a computer, i know i will be able to use logmein or gotomypc to Download files directly to that machine even when im not home and when i do get home its ready to go. Can the same be achieved with a NAS?What else should i consider? i.e. pros and cons of both.
Right now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?
View 1 Replies View Related if i want to run my CCTV software from my office 1- how to connect to home network ?? should i use VPN ?
if yes : kindly tell how to configure both office PC and my network at home
if no : is there another technology (free one , easy to configure....)
I have a very high speed connection in my dad's office, and it is over 10 mbps. and the connection in my house is worse ( 256 kbps ). So can I use the office connection in home without any problems from the ISP. just like sharing the connection from the office to home.
View 7 Replies View RelatedI have this strange problem the application Whatsaap connects at my office wifi perfectly but at home it does not connects,I don't know what seems to be the solution.
View 2 Replies View Relatedlooking for opinions on a Wireless Access Point/Bridge/Repeater/Router I might buy and setup for a the home workstation, few wireless devices, and future add-ons.
Product;
EnGenius ECB9500 Wireless Access Point / Bridge / Repeater / Router with Gigabit & 802.3af PoE,
IEEE 802.11b/g/n ,
Up to 300Mbps ,
WEP Encryption 64/128bits
WPA Personal (WPA-PSK using TKIP or AES)[code].....
I wanna setup a small office network ? how do I setup and can I use a printer on this LAN ??
View 3 Replies View RelatedIf we remove lan card from office and fix it in home machine so the ip address is same or it will be different?
View 1 Replies View RelatedWould the above router be a good choise for a home office setup for use with WAN speeds upto 30Mbps and VOIP? Any other.
View 1 Replies View RelatedI am not sure what the problem is but my laptop wont connect to the wireless in my office, it connects fine to my wireless network at home..
View 13 Replies View Relateddo not have fast internet service so we must need to combine two or more different internet providers and get one speed kindly reply do you know any router/modem/switch which can do this for us.
View 2 Replies View RelatedI have my laptop. I need to use my broadband connection at my home. Also I need to use my laptop with wifi at my office. We do not have any dhcp servr at office. What I am doing now is changing ip configuration at office every day manually.
View 2 Replies View RelatedI have recently managed to configure a setup where I have 2 srp527's one at office one at home.Have 1 fixed IP at the office and 1 fixed ip at home.I have configured the srp at work to be a vpn server and have configured the group and 2 user profiles. This allows me to have 2 concurrent sessions over the vpn to my office from desktop and laptop at the same time. Connections fire up perfectly no problems.From the desktop, I connect using vpn client with user profile 1 Once connected, I then connect to my workstation machine at the office using remote desktop.This gets me super fast access to office files and large spreadsheets without downloading the whole file over the vpn and is working perfectly.
If I then additionally connect from the laptop using the vpn client with user profile 2 the remote desktop connection drops.Disconnect the laptop connection, remote desktop comes back.Have isolated this to being 2 connections arriving at the srp at the office from the same external ip. If I connect my laptop to my phone as a hotspot rather than using my home LAN, both connections are made and remote desktop has no interruptions. Is there a way I can overcome this through re-configuration of the srp at the office or is this a limitation with the srp?
I have a group of five computers at one end of my home office and another group of four computers across the same room. All are hardwired on the same internal network. These cannot be consolidate or moved into one corner or closet. There just is not the space and it's just physically not possible.There is one Internet router as provided by the local cable company. I have this connected to a LinkSys WRT54G2 broadband router. A Netgear DS108 8-port hub is connected the LinkSys. All computers either connect to the Netgear hub or to the LinkSys router. As of now, the WiFi from the LinkSys router is only ever used by my cell phone while at home.
This set up is annoying. At first I did not mind, but there are cables on the floor that I have to step over. These CAT5 cables connect one set of computers to the LinkSys or Netgear. I have to watch where visitors are walking or stepping to assure they don't trip.How can I keep these computers on the same network and eliminate just those cables crossing the floor of my home office?Should I use WiFi NICs? Would this overwhelm the WiFi on the LinkSys?
I want to acccess my office computer from Home PC.I have ZTE DSL Modem + Wireless Router and got new Static IP, so how to configure Static IP From BSNL.
View 3 Replies View RelatedI have a Windows 7 Laptop that need to be able to join a Home Workgroup as well as an office Workgroup. How!
View 1 Replies View RelatedHere a have a quest that can't find the perfect solution for a half year now.I have one machine at office and one at home, both Windows XP SP3, ADSL connection with static IP.On the office machine a have an archive of about 250 GB of files.When i am at home sometimes i need to connect to my office machine, search through those files, maybe preview some, and then download some needed files to my home machine, using a download queue feature is possible.The task doesn't seem so complicated, yet, i did not find a perfect simple solution so far.
View 5 Replies View Relatedi have a cisco router 887 which i am trying to configure. but however, do i really need to use the SDM utility or i can do it through CLI?i need to replace my current router in my small home office.
View 3 Replies View RelatedI am connecting to a ASA5505 at from home to the head-office using L2TP VPN.
Head-office then has a connection to other-office via a site-to-site IPSEC tunnel.
When in the head-office (192.168.100.0/24) I can ping/access remote-office (192.168.200.0/24) OK.
When connected remotely to head-office, I can ping/access head-office OK from the road-warrior laptop.
My problem is that when connected remotely from home to the head-office I cannot ping/access the other-office subnet.
On the home laptop the L2TP VPN connection is set to route all traffic to the VPN connection using the HQ as the internet gateway I can confirm this works.
I cant do traceroute (I get timeouts) as my policy doesnt allow and not sure how to enable this properly on the ASA.
names
name 192.168.200.0 othersite
!
interface Vlan1
nameif inside
security-level 100
[code]....
I would like to ask if its possible to remotely access a WAP54G?
View 3 Replies View Related
