Cisco VPN :: Configure Setup With 2 Srp527 At Office And Home
Sep 2, 2012
I have recently managed to configure a setup where I have 2 srp527's one at office one at home.Have 1 fixed IP at the office and 1 fixed ip at home.I have configured the srp at work to be a vpn server and have configured the group and 2 user profiles. This allows me to have 2 concurrent sessions over the vpn to my office from desktop and laptop at the same time. Connections fire up perfectly no problems.From the desktop, I connect using vpn client with user profile 1 Once connected, I then connect to my workstation machine at the office using remote desktop.This gets me super fast access to office files and large spreadsheets without downloading the whole file over the vpn and is working perfectly.
If I then additionally connect from the laptop using the vpn client with user profile 2 the remote desktop connection drops.Disconnect the laptop connection, remote desktop comes back.Have isolated this to being 2 connections arriving at the srp at the office from the same external ip. If I connect my laptop to my phone as a hotspot rather than using my home LAN, both connections are made and remote desktop has no interruptions. Is there a way I can overcome this through re-configuration of the srp at the office or is this a limitation with the srp?
View 1 Replies
ADVERTISEMENT
Apr 6, 2012
i have a cisco router 887 which i am trying to configure. but however, do i really need to use the SDM utility or i can do it through CLI?i need to replace my current router in my small home office.
View 3 Replies
View Related
Feb 9, 2012
I am trying to setup VPN monitoring for a srp527w Cisco.This is my first attempt at this so "easy to understand" instructions would be a great, i have done some searching and its difficult to decipher relevant and irrelevant information based on my limited exposure to this technology.
View 1 Replies
View Related
Jan 9, 2011
My home network consists of a Linksys WRT54GL router running DD-WRT supplying wired access to my desktop, a bridge to another WRT54GL (also running DD-WRT) to provide a wired connection to a XBOX upstairs, and wireless access to about 5 or 6 different devices including several laptops, an iPad, and an iPod touch. My question is this:
I am adding a 22" TV into my office so I can watch TV while working on my desktop. I only have one cable jack in my office which is currently plugged straight into my cable modem. This means I'll have to use a splitter to give both my TV and modem cable access. How much signal degradation or speed do I stand to lose or should expect to lose?
View 13 Replies
View Related
Apr 3, 2013
Would the above router be a good choise for a home office setup for use with WAN speeds upto 30Mbps and VOIP? Any other.
View 1 Replies
View Related
Oct 26, 2011
I have a very high speed connection in my dad's office, and it is over 10 mbps. and the connection in my house is worse ( 256 kbps ). So can I use the office connection in home without any problems from the ISP. just like sharing the connection from the office to home.
View 7 Replies
View Related
Oct 12, 2011
I have this strange problem the application Whatsaap connects at my office wifi perfectly but at home it does not connects,I don't know what seems to be the solution.
View 2 Replies
View Related
Jul 18, 2011
looking for opinions on a Wireless Access Point/Bridge/Repeater/Router I might buy and setup for a the home workstation, few wireless devices, and future add-ons.
Product;
EnGenius ECB9500 Wireless Access Point / Bridge / Repeater / Router with Gigabit & 802.3af PoE,
IEEE 802.11b/g/n ,
Up to 300Mbps ,
WEP Encryption 64/128bits
WPA Personal (WPA-PSK using TKIP or AES)[code].....
View 12 Replies
View Related
Jul 7, 2011
I wanna setup a small office network ? how do I setup and can I use a printer on this LAN ??
View 3 Replies
View Related
May 22, 2012
If we remove lan card from office and fix it in home machine so the ip address is same or it will be different?
View 1 Replies
View Related
Feb 22, 2011
I had an SMC router before, and I replaced it with this new D-link DIR-655, The problem I am now having is that I used to visit a web based e-mail /OWA Outlook Web Access, After I VPN to my company, but now with this new D-Link after I VPN, I lost the capability of accessing my OWA to read my e-mail
View 1 Replies
View Related
Feb 10, 2013
How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
View 7 Replies
View Related
May 9, 2013
I have a Any Connect setup and able to VPN into my office.i bought a ASA5505-SW-UL that is unlimited user (UL) software license but now the vendor tells me that: From the ASA you can saw the unlimited license is for inside hosts, instead VPN client's, by default, ASA 5505 included only 2 VPN client's and can supported up to 25 VPN client's, your license look only default 2 VPN client's. If need more VPN client's connect, you have to purchase the additional VPN client's license. I am just wondering his statement TRUE/FALSE, because i thought ASA5505-SW-UL means unlimited license
View 4 Replies
View Related
Apr 23, 2013
I have a problem with a branch office setup, and I can't for the life of me think of what the problem is.I have a remote office setup, using an ASA 5505 that is set up to establish an easy vpn connection to the central network. The connection at the branch office is a 20/5 cable modem, the central network has a 25/25 fiber connection.
The issue I have is this. Wired clients work fine at this branch office, at least 95% of the time. I have a lightweight AP there that can come up and join the controllers at the central network, no problem. I haven't done anything with H-REAP because there are really no resources locally they need that would allow them to do their work, so all traffic is tunneled back to the WLC.
Wireless clients can authenticate to the AP, and I can get 15-20ms ping responses from them all day. Latency never comes close to the 600ms proposed limit with CAPWAP. Yet, for some reason the performance of the clients is problematic. Webpages will frequently not load correctly, they experience some freezing, and with one application we use - it refuses to load completely.If we bring these same computers to an AP connected to our central network, on the same SSID, they work flawlessly.
Something about this particular location is causing a lot of grief for our users.For what it's worth, we are running WCS 7.0.230.0 and the WLCs are on 7.0.116.0. The ASA is running a pretty basic configuration, pretty much out of the box with the easy vpn configuration entered.
View 7 Replies
View Related
Jun 25, 2012
I was into IBM iSeries all these years (15 years) and just got into Microsoft Programming(.NET) I have done a program in csharp.net which gets input from the users and dump it into a database. 50 users are going to do the data entry with just one database. As I dont have much knowledge on sharing/accessing applications/database in a network environment (PC based).
View 1 Replies
View Related
Feb 21, 2011
I have been tasked with the technology update of our office and have have MAJOR questions which I hope can be answered here, so here goes;
First a little history, I have an electronics degree and a certificate in computer technology, so computers are not something new to me, however networking IS.I have a VERY LIMITED budget to work with, which I'm sure is not unheard of before, with the following equipment already available:
1 MFP currently on lease connected via network
3 totally junk PCs running 3 different versions of Windows from XP to 7
A DSL internet connection
A wireless router
A wired 8 port switch
What I would like to do is begin with a basic server, 7 clients, shared internet on all machines (including external via login), An MFP, at least 1 NAS for data storage, 1 NAS for backup of all drives.
View 3 Replies
View Related
Jun 4, 2012
How i can configure my small office of about 5 computers to have LAN Networking?
View 1 Replies
View Related
Jul 16, 2012
I am connecting to a ASA5505 at from home to the head-office using L2TP VPN.
Head-office then has a connection to other-office via a site-to-site IPSEC tunnel.
When in the head-office (192.168.100.0/24) I can ping/access remote-office (192.168.200.0/24) OK.
When connected remotely to head-office, I can ping/access head-office OK from the road-warrior laptop.
My problem is that when connected remotely from home to the head-office I cannot ping/access the other-office subnet.
On the home laptop the L2TP VPN connection is set to route all traffic to the VPN connection using the HQ as the internet gateway I can confirm this works.
I cant do traceroute (I get timeouts) as my policy doesnt allow and not sure how to enable this properly on the ASA.
names
name 192.168.200.0 othersite
!
interface Vlan1
nameif inside
security-level 100
[code]....
View 1 Replies
View Related
Apr 29, 2011
I am not sure what the problem is but my laptop wont connect to the wireless in my office, it connects fine to my wireless network at home..
View 13 Replies
View Related
Jan 26, 2011
do not have fast internet service so we must need to combine two or more different internet providers and get one speed kindly reply do you know any router/modem/switch which can do this for us.
View 2 Replies
View Related
Feb 8, 2013
I have my laptop. I need to use my broadband connection at my home. Also I need to use my laptop with wifi at my office. We do not have any dhcp servr at office. What I am doing now is changing ip configuration at office every day manually.
View 2 Replies
View Related
Jan 26, 2012
I have a group of five computers at one end of my home office and another group of four computers across the same room. All are hardwired on the same internal network. These cannot be consolidate or moved into one corner or closet. There just is not the space and it's just physically not possible.There is one Internet router as provided by the local cable company. I have this connected to a LinkSys WRT54G2 broadband router. A Netgear DS108 8-port hub is connected the LinkSys. All computers either connect to the Netgear hub or to the LinkSys router. As of now, the WiFi from the LinkSys router is only ever used by my cell phone while at home.
This set up is annoying. At first I did not mind, but there are cables on the floor that I have to step over. These CAT5 cables connect one set of computers to the LinkSys or Netgear. I have to watch where visitors are walking or stepping to assure they don't trip.How can I keep these computers on the same network and eliminate just those cables crossing the floor of my home office?Should I use WiFi NICs? Would this overwhelm the WiFi on the LinkSys?
View 10 Replies
View Related
Jul 6, 2010
I have finally got my office extend AP to connect to my companies 5508 controller by enabling NAT on the management interface and can see all the cooperate SSID's. However when I try to connect to the SSID my client either gets a local IP address from my home router or then cannot get any IP address.
View 9 Replies
View Related
Jan 21, 2013
I just joined this company and they already ad a VPN to one of their partners that provides them access to some resources. We have now added a 2nd location but the partner wouldnt allow a 2nd VPN tunnel so the decision was made to give the new location a ASA5505 to tunnel thru the main office to access the resources at the partners site.Using ASDM i believe i was able to setup the tunnel to the main office but there is no resource there to use. Now i'm stuck and i do not know what to do to get to the partner site
View 4 Replies
View Related
Jun 10, 2012
We have a main office and 4 remote offices (only showing 1 remote office in the diagram). We are using GRE over IPSec VPNs to the remote offices which terminate on the 2811 router in the main office. We are using the 2811 as it is the only device that we have that can terminate GRE. The 2811 router is connected to the outside switch and is configured with a public IP address. We also have a ASA5510 in the main office which is connected in the same manner and is used for Web, e-mail traffic etc.Both the main office and remote offices have a 10Mbps Internet connection.
We have an issue with voice quality between sites as we are finding it difficult to control bandwidth utilization in the main office. When users in the main office download web content it can saturate the 10Mbps Internet connection causing voice quality issues. We have configured outbound shaping on the branch routers to make sure that aggregate inbound traffic from all branches to the main office does not saturate the link but we cannot control traffic from the Internet.I understand that controlling inbound traffic from the Internet is difficult without controlling QoS on the ISPs side. Is there any way that can reserve inbound bandwidth to ensure that web traffic does not impact voice? Also in this design, which is the best place to configure outbound QoS from the main office?
View 4 Replies
View Related
Jun 28, 2011
I have 3 different office location and I need to set up a LAN so that all three are connected and can share info?
View 1 Replies
View Related
Aug 14, 2011
What are the best network engineering practises for a small/medium sized office?Currently I have set it up like this:The top floor has all the sales people, each desk has a hub underneath which connects all computers at that desk together, and the hum is connected to a switch under the floor. There are about about 8 desks each with about 4 computers, so 8 hubs.They all go into a 10/100 switch, which is then connected to an 1gb switch on the bottom floor via a 1gb port on the top floor switch, via a cat6 cable.We then have internet > modem > router > the 1gb switch. Our main server is also connected to that switch along with all the computers for the ground floor, except these computers have 1gb switches under the desks instead of hubs. The main server is the DHCP, DC, DNS and file server. We have also setup another server which acts as a backup DC and is also a DNS server.Is there anything wrong with this configuration? We have been having problems with the router losing connection to the internet and warnings on the main DNS server.
View 6 Replies
View Related
Nov 1, 2012
I presently have a fiber internet connection to my office with about 40 wireless users on a single AP. The connection keeps dropping. Probably due to too many users on a single AP?
1. My question is similar to aniketchitale's, can get another wireless router, create a different SSID (eg. router1 and router2), but both wireless routers still connected to the same fiber connection. In other words, I would like to segregate the first 20 users to router 1 and the next 20 users to router 2.
2. By having 2 wireless routers each with their unique SSID, will all the users still be able to access to the same printer in the office?
View 12 Replies
View Related
Apr 1, 2013
I have a home office with multiple VLANS/subnets I have many VPNs that connect only a specific subnet to a specific remote offfice. On a 5520, can I create a S2S VPN to different remote offices that have the same IP scheme, but from different home office subnets? For example at my home office let's say I have two independant, distinct VLAN/subnets: 192.168.140.0/24 and 192.168.150.0/24. Can I create an S2S from the 140 subnet to a remote office with a 10.10.10.0 addressing scheme and another S2S from the 150 subnet to a totally different office also with a 10.10.10.0 scheme?
View 1 Replies
View Related
Feb 25, 2013
I want to acccess my office computer from Home PC.I have ZTE DSL Modem + Wireless Router and got new Static IP, so how to configure Static IP From BSNL.
View 3 Replies
View Related
Dec 30, 2011
I have a Windows 7 Laptop that need to be able to join a Home Workgroup as well as an office Workgroup. How!
View 1 Replies
View Related
Mar 31, 2011
Here a have a quest that can't find the perfect solution for a half year now.I have one machine at office and one at home, both Windows XP SP3, ADSL connection with static IP.On the office machine a have an archive of about 250 GB of files.When i am at home sometimes i need to connect to my office machine, search through those files, maybe preview some, and then download some needed files to my home machine, using a download queue feature is possible.The task doesn't seem so complicated, yet, i did not find a perfect simple solution so far.
View 5 Replies
View Related
Dec 3, 2012
I setup RV042s at a clients offices for the VPN support and am now finding that multiple sip clients behind the router does not work. I found a thread on tech and it looks like there's a case open for the issue. url... How to get this working other than assigning IPs for the phones and dealing with different ports.
View 1 Replies
View Related
