I was into IBM iSeries all these years (15 years) and just got into Microsoft Programming(.NET) I have done a program in csharp.net which gets input from the users and dump it into a database. 50 users are going to do the data entry with just one database. As I dont have much knowledge on sharing/accessing applications/database in a network environment (PC based).
View 1 RepliesRight now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?
View 1 Replies View RelatedI have been tasked with the technology update of our office and have have MAJOR questions which I hope can be answered here, so here goes;
First a little history, I have an electronics degree and a certificate in computer technology, so computers are not something new to me, however networking IS.I have a VERY LIMITED budget to work with, which I'm sure is not unheard of before, with the following equipment already available:
1 MFP currently on lease connected via network
3 totally junk PCs running 3 different versions of Windows from XP to 7
A DSL internet connection
A wireless router
A wired 8 port switch
What I would like to do is begin with a basic server, 7 clients, shared internet on all machines (including external via login), An MFP, at least 1 NAS for data storage, 1 NAS for backup of all drives.
What are the best network engineering practises for a small/medium sized office?Currently I have set it up like this:The top floor has all the sales people, each desk has a hub underneath which connects all computers at that desk together, and the hum is connected to a switch under the floor. There are about about 8 desks each with about 4 computers, so 8 hubs.They all go into a 10/100 switch, which is then connected to an 1gb switch on the bottom floor via a 1gb port on the top floor switch, via a cat6 cable.We then have internet > modem > router > the 1gb switch. Our main server is also connected to that switch along with all the computers for the ground floor, except these computers have 1gb switches under the desks instead of hubs. The main server is the DHCP, DC, DNS and file server. We have also setup another server which acts as a backup DC and is also a DNS server.Is there anything wrong with this configuration? We have been having problems with the router losing connection to the internet and warnings on the main DNS server.
View 6 Replies View RelatedXYZ Corporation currently employs eight people but plans to hire 10 more in the next four months. Users will work on multiple projects, and only those users assigned to a project should have access to the project files. You’re instructed to set up the network to make it easy to manage and back up. Would you choose a peer-to-peer network, a server-based network, or a combination of both?
View 1 Replies View RelatedI am trying to setup a small audience internet radio.An I have been looking around for decent software to do this.I like to use it in conjunction with Winamp 5.0 And also I like it to stream to a radio server preferably Caster.FM An I would like to slipstream an microphone channel into that.I did try EdCast, but no microphone option.Apart from that its the best I came across.
View 2 Replies View Relatedi'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View Related[code] Basically, we used to use Outlook for our customer management, but after I tried to design a custom form for customers that suited our needs better than Outlook's default form (i.e. we don't need state, country, region, etc. for each customer, and we'd prefer to have spots for Roof, Shingle, Shingle color, etc. in their place), we ended up turning OneNote into our new Customer Management System.Our problem is sharing files, and the security or lack thereof that goes along with it.We used to save all the files to a single computer, and use Windows 7 Home group to access them. That worked okay, but often we couldn't see the file-holding computer, and would have to disconnect/reconnect to the internet.
We recently bought a NAS HD, which actually works a lot better than I expected. Unfortunately, we've learned recently that new employees are not always the most trustworthy. So this is what we are trying to do:We want to set up some type of way for us to save, store, and access files, which allows us to keep track of who has done what (access, save, copy, delete, print, etc.), preferably one where we can set up alerts if certain things happen (i.e. someone copies and pastes the entire thing, or attempts to delete). We've run into the problem where, yes, we want people to be able to copy and paste certain documents, yes we want people to be able to print, but no we don't want someone to be able to print out our entire customer lists, current project lists, etc.This NAS HD (MyBook Live 2TB by Western Digital) could quite possibly have the most ridiculous set up I've ever encountered. I can set up accounts and passwords, but they are completely irrelevant because from "Computer" you can just select the z:/ drive and it will still take you to our files. We just brought on a couple new people, and its like, everyone tells them to come to me in regards to the computers, and I can't even hook them up to the internet because it would give them access to our network, which in turn gives them access to our z:/ drive, which contains every file our company has.
My current set-up is: my laptop connects to the coaxial outlet with a cable so I can access the internet. So I can't really bring it somewhere else since the cable is short.
Now, I am planning to buy 2 more computers and a printer. The printer will be shared by all 3 computers. what else I need to buy (modem?? wireless router??) and what type. I also request that you let me know how to set it up. Of course, I will follow the manufacturer's instructions.
I would like to connect my three pcs together so that they can all make use of the printers, scanners, internet etc in my office space. i also need to be able to access this lot from a remote laptop so that i can continue to work from home. i would like to store all my data in one place that was easily accessible from every PC and my laptop.
View 2 Replies View RelatedHow do I create a small office network?
View 1 Replies View RelatedHow do I go by setting up a small network in my office with 3 computer. Reason is to share files, printers, internet.
View 1 Replies View RelatedHow i can configure my small office of about 5 computers to have LAN Networking?
View 1 Replies View Related for your recmmendation, on what type of equipment should I use in a Small Office probably around 50-100 users.Feature sets that I would want are: VPN - 5 VPN Peers for L2L connectivity and 50 SSL VPN connections, Firewall, Active-Standby Fail-over.
I'm on a limited budget, ASA 5510 with Security Plus License can give me this but its a bit expensive.Is there something else that you guys can recommend. ISR maybe?
My office just moved to a bigger location, and we are having trouble with network connectivity.
Current layout: Modem --- Wired-----> 2wire 5012NV ------wired/wireless----> PCs
The 2wire is at one end of the office, and PCs at the other end experience poor wireless connectivity.I'm thinking of using a spare WRT54G2 in "bridged" mode, to extend the Ethernet, and wireless of the main router.
For wired bridging, I understand that that the WRT54G2 will do, is act as a "port multipler", where 1 port from the 2wire can be multiplied into 4. I also want the wrt54g2's wireless to extend the Ethernet connection (not extend the wireless connection).
I have a cable modem in the basement and ethernet lines to two offices upstairs.I have a 4-port wireless router and a 5-port switch. I have a computer in each office and a NAS in one of the two offices.There is no direct wiring between the offices. I want to have internet access and access to the NAS from both offices. Will the following configuration work without having to go to Static IPs? 1) Modem01-> Router01->Switch01->Computer01; 2) Modem01->Router01->Switch01->NAS01; 3) Modem01->Router01->Computer02. If not, what needs to change?
View 3 Replies View RelatedI have to setup what seems to be a very basic configuration, but it doesn't work. In our lab there is a cluster of switches with a 3550 that does all the routing for vlans. I need to simulate a sort of a small branch office that has one connection to the outside world (the lab network). [code] From the router I can ping any host on vlan 230 and other vlans,I can also ping the pc connected to e0/1.However from the PC I can only ping 192.168.1.1(e0/1) and 172.26.230.150 (e0/0) [code]
View 3 Replies View Relatedi have a cisco router 887 which i am trying to configure. but however, do i really need to use the SDM utility or i can do it through CLI?i need to replace my current router in my small home office.
View 3 Replies View RelatedI can't seem to figure out which one I should go for. I'm thinking Kaspersky would have greater security but I'm not familiar with AVG's server level security.I don't need all the bells and whistles such as file encryption or password storage. I'm simply after a really strong AV for the server. Another one is VIPRE although I've heard it can take a while to configure it unlike Kaspersky which is pretty straight forward.
View 1 Replies View RelatedI'm trying to network a small office and have the following devices:
SMCD3G Cable Modem
Belkin Play N600 Router
Digi Mil-H1130 8 Port Ethernet SOHO Hub
Hubbel Cat5 Patch Panel (goes up to 12)
We're replacing our DSL line with a Cable line. Our DSL was a one piece wireless router/modem. When it was installed, it was inside our office, next to the server, and plugged into Wall Jack 1 for all the other computers to connect to. Our server plugged into this modem/router. We didn't have the Belkin Router at the time. The Patch Panel wires went into the Hub behind our office and everything was fine.
The cable modem is now next to the Hub and Patch Panel. I bought the router since we didn't have the wireless feature that the DSL had and everyone I spoke to said I need a router to set up the office. I ran one of the LAN lines from the modem into the Router where it says Modem (WAN). From the Router, I ran the line 1 (LAN) into the Hub. (Does the number matter if nothing is plugged into it in our office?) No computer is able to connect to the internet except my laptop which connects wireless. It works fine.
Another problem. We have a server computer that's Unix based. In order for anyone to connect to the server to access the office software used, the IP address of the router must be 192.9.2.1 or the computer your using won't connect via Multiview 2000 Terminal Emulator. I can't connect to the server because the IP address of the router is still 192.168.2.1. I don't know where I have to go in the router settings to change it. I've tried a few spots and it tells me the IP address is invalid. The settings I had with the DSL modem/router were:
Modem IP address - 192.9.2.1
Subnet Mask - 255.255.255.0
DHCP Start Address - 192.9.2.100
DHCP End Address - 192.9.2.150
It's not like I need to run wires. Everything is set. If something is plugged into a wrong spot, I can switch it.
Additional info:
There are 4 computers in the office and 8 numbered wall jacks.
Server computer - Wall jack 8 (IP address of this machine - 192.9.2.25)
XP Machine 1 - Wall jack 4 (can't connect to server! No internet.)
XP Machine 2 - Wall jack 1 (Is able to connect to the server! No internet.)
Win CE Machine - Wall jack 9 -
I assume. I have a wire that goes through the wall on this machine and it isn't marked. (Rarely used so not sure about server connection)
Wireless Windows7 laptop - connects to the internet fine since it bypasses all these wires. Can't connect to server.
Under the DHCP client list, only 2 computers are listed. The one that has internet is my computer. The other computer listed is wall jack 4 and that has internet now.
my computer - 192.9.2.2
wall jack 4 - 192.9.2.3
The router IP is 192.168.2.1 and the Cable Modem is 10.1.10.11. If I type either number into my web browser it will take me to the router setup page. I don't know where/how to check if it's only one device acting as DHCP. What I want to do is be able to get online with all the computers as well as have access to the software on the server through the office wall jacks. In order to do that I need the router IP address to be 192.9.2.1 and then I'd be able to connect to it.
Right now, one computer is able to connect to the server via hard wire but can't connect to the internet.Another computer is able to connect to the internet via hard wire but can't connect to the server.My laptop can connect wireless to the internet but not the server. In a perferct world, all the computers should be able to connect to both the internet and the server. Right now, it's one or the other with both hard wired machines and I don't know why. Is there a wire not in the hub right? Is a patch panel wire plugged into the wrong port of the hub? I don't know what's supposed to go where. tell me "wire X from the modem goes to Port Z of the router, and Wire Y from the the router goes to number V on the Hub, and that wire goes to number T on the patch panel for the Port number R in the office to work..." I'll try it.
Then I think all I need to do is change the router's IP address to 192.9.2.1 and everyone should be able to connect to the server through the Multiview 2000 Terminal Emulator.When I tried to change the IP address on the router it's telling me it's not valid. Under LAN settings it says 192.168.2.1 - when I try to change it to 192.9.2.1 it tells me LAN IP address is invalid. I clicked on More Info below that in the router page and a pop up gives me info. It says:
The "IP address" is the Internal IP address of the Router. To access the advanced setupinterface, type this IP address into the address bar of your browser. This address can be changed if needed. To Change the IP address, type in the new IP address and click "ApplyChanges". The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:
192.168.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)
10.y.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)
172.z.y.x (where z is anything from 16 to 31, and y is anything between 0 and 255, and x is anything between 1 and 254.)
I want to connect to the Internet small office where docsis (internet over tv cable) is used as WAN.For similar tasks but other WANs (adsl, dial-up) I used 800 series. But now I can't find anything in this series to solve my issue. There is 815 but it has no wi-fi.
I can use cable modem that my ISP gave to me: this modem acts as bridge so I can use router with FE-based WAN but it is better to have one device instead of two.
I'm setting up a wireless network for a small office with 25 people with approx. 15 on wireless at any time. The office is very long and skinny so I'm looking at a cluster of WAP321's. I'm hoping these will save a ton of money versus buying a controller and more expensive access points.
How do these work for roaming? I tried a search but I've found descriptions of them not roaming at all and descriptions of them roaming but you have to do some kind of pre-authorization right up to they roam with no user interaction, they just roam.
I need the users to be able to roam around the office with no interruption. I don't want to install these and have to rip them out later and put in new ones and a controller. How to find out if the WAP321's will work for roaming.
I m connected to a LAN With about 1500-2000 other clients. My network has been subnetted into several small networks according to the hostels (i study in a university). Most effective way to implement INTER-hostel file sharing.Each hostel has typically about 200 clients.
View 2 Replies View RelatedI am taking a camera class, everyone sits a desk with a fairly new Optiplex 780, with Windows 7 pro on them and 20 inch Dell Professional monitors.I want to be able to setup something easily so the teacher can share his screen on all of the computers in the class, the projector is terrible.Net Meeting does not exist. Vista had Windows MeetingSpace which would have been absolutely perfect. Windows 7 has SharedView, which is discontinued, is a separate download, and has to be used over the internet with a windows live login.Is there some VNC, free app out there that the teacher can put on his laptop, and have everyone connect to? Over the lan? There are many web-based options, but that probably be slow.
I can use the Bomgar and work and host a presentation, which is what I will probably do, but I have a feeling it is going to suck up a ton of bandwidth and run like crap. We want to display examples of photography in full color.He of course doesn't even know of these plans. But I want to utilize these computers we are sitting at.Could I bring in a Vista laptop, start a MeetingSpace, and have the Windows 7 computers connect to it?
My workplace currently has one AD Forest. Slowly we have drifted in to two slightly separate businesses and my boss wants us to create a new AD Forest and segregate the users doing each business. Although we will all be in the same office, each side will authenticate to a different DC. The problem is, that we have some resources that still need to be shared and I would like to share them as eloquently as possible without converging the networks too much. The two networks will be in the same server rack but they will logically appear as this:Forest1.local (original)
-Cable Internet -- Router A (192.168.1.x) -- 48-port switch A -- PC/Phones/Domain Controller AForest2.local (new)
-Cable Internet -- Router B (10.1.1.x) -- 48-port switch B -- PC/Phones/Domain Controller B.
The problem I have is that the users in the "new" network need access to a shared folder, shared customer DB, and shared printers on the original Domain Controller, named "DC A" above. I have complete control over both networks but cant figure it out the best way.My main concern is physical access between the networks. How will a pc on the 10.1.1.x network know where printer 192.168.1.2 is? I thought about creating a forest trust in order to assign proper permission but how will they resolve the names on a different subnets? The two "routers" are just simple SOHO type routers so I cant do much there. I thought about connecting the two switches together but don't know if that would work. Wouldn't the data just get passed to the default gateway (router) anyway. The router would then just drop it. I also though about using the 2nd NIC in each DC and connecting them in each other's subnet. But again Im not sure if it matters if the DC's can reach each other or if the PC's would have to be able to reach the other subnet etc. I also thought about just creating some kind of VPN (hamagachi) or whatever to go out into the internet then back into the other router to the network.The problem is wouldnt every computer wanting to access the shared folder have to have this setup. I would like to limit setting things up on workstations and just limit config to the DC's if possible.I basically just want users in subnet two to be able to map a drive and access printers on DC in subnet one.
How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
View 7 Replies View RelatedI wanted to setup a home network for primarily sharing my music, pictures and videos.I have a PS3 which can stream the video/music and display the pictures from a media server to my TV.I was wondering between NAS and a desktop computer? and wanted to know which was the better or cheaper solution? (2 much 2 ask for both)
Main Issues
--Will NAS work with PS3?
--Incase of a computer, i know i will be able to use logmein or gotomypc to Download files directly to that machine even when im not home and when i do get home its ready to go. Can the same be achieved with a NAS?What else should i consider? i.e. pros and cons of both.
I run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.
View 1 Replies View Related if i want to run my CCTV software from my office 1- how to connect to home network ?? should i use VPN ?
if yes : kindly tell how to configure both office PC and my network at home
if no : is there another technology (free one , easy to configure....)
My problem is that I have a Cisco 300 series small business switch with multiple VLANS each one with an IP address and two or three ports assigned to each VLAN. I have an E3200 wireless router that I want to use to use to share internet on the switch. All of the VLANs are reachable from the other VLANs and I've put a static route on the E3200 so that I can reach the VLANs from a machine connected only to the router. But I can't reach machines on the otherside of the router or get to the internet from the switch.
View 3 Replies View RelatedHow would I go about setting up a network at my house. I have two desktops and a netbook all hooked to a switch and the switch to the router.
View 2 Replies View RelatedHow to setup a 20 -30 computer network.
Requirement:
- All systems can be accessed from network and should be connected.
- Data storage in a centralized device and accessible from all device.
- Should be connected to internet.
setup of 20 users small network description
View 1 Replies View Related