Configure Small Office Of About 5 Computers To Have LAN Networking?

Jun 4, 2012

How i can configure my small office of about 5 computers to have LAN Networking?

View 1 Replies


ADVERTISEMENT

Servers :: Small Office Networking With File Sharing For Certain Users?

Feb 4, 2012

Right now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?

View 1 Replies View Related

Cisco Switching/Routing :: How To Configure The 887 In Small Home Office

Apr 6, 2012

i have a cisco router 887 which i am trying to configure. but however, do i really need to use the SDM utility or i can do it through CLI?i need to replace my current router in my small home office.

View 3 Replies View Related

Setting Up A Network In A Small Office?

Oct 17, 2011

My current set-up is: my laptop connects to the coaxial outlet with a cable so I can access the internet. So I can't really bring it somewhere else since the cable is short.

Now, I am planning to buy 2 more computers and a printer. The printer will be shared by all 3 computers. what else I need to buy (modem?? wireless router??) and what type. I also request that you let me know how to set it up. Of course, I will follow the manufacturer's instructions.

View 15 Replies View Related

Small Office Network - Connect Three PCs Together?

Apr 4, 2013

I would like to connect my three pcs together so that they can all make use of the printers, scanners, internet etc in my office space. i also need to be able to access this lot from a remote laptop so that i can continue to work from home. i would like to store all my data in one place that was easily accessible from every PC and my laptop.

View 2 Replies View Related

Sharing :: Small Office Setup With 50 PCs

Jun 25, 2012

I was into IBM iSeries all these years (15 years) and just got into Microsoft Programming(.NET) I have done a program in csharp.net which gets input from the users and dump it into a database. 50 users are going to do the data entry with just one database. As I dont have much knowledge on sharing/accessing applications/database in a network environment (PC based).

View 1 Replies View Related

How To Create A Small Office Network

Jul 26, 2012

How do I create a small office network?

View 1 Replies View Related

Small Office Network Setup?

Feb 21, 2011

I have been tasked with the technology update of our office and have have MAJOR questions which I hope can be answered here, so here goes;

First a little history, I have an electronics degree and a certificate in computer technology, so computers are not something new to me, however networking IS.I have a VERY LIMITED budget to work with, which I'm sure is not unheard of before, with the following equipment already available:

1 MFP currently on lease connected via network
3 totally junk PCs running 3 different versions of Windows from XP to 7
A DSL internet connection
A wireless router
A wired 8 port switch

What I would like to do is begin with a basic server, 7 clients, shared internet on all machines (including external via login), An MFP, at least 1 NAS for data storage, 1 NAS for backup of all drives.

View 3 Replies View Related

Network Setup For Small / Medium Office?

Aug 14, 2011

What are the best network engineering practises for a small/medium sized office?Currently I have set it up like this:The top floor has all the sales people, each desk has a hub underneath which connects all computers at that desk together, and the hum is connected to a switch under the floor. There are about about 8 desks each with about 4 computers, so 8 hubs.They all go into a 10/100 switch, which is then connected to an 1gb switch on the bottom floor via a 1gb port on the top floor switch, via a cat6 cable.We then have internet > modem > router > the 1gb switch. Our main server is also connected to that switch along with all the computers for the ground floor, except these computers have 1gb switches under the desks instead of hubs. The main server is the DHCP, DC, DNS and file server. We have also setup another server which acts as a backup DC and is also a DNS server.Is there anything wrong with this configuration? We have been having problems with the router losing connection to the internet and warnings on the main DNS server.

View 6 Replies View Related

Steps Of Creating A Network In A Small Office

Jan 11, 2013

How do I go by setting up a small network in my office with 3 computer. Reason is to share files, printers, internet.

View 1 Replies View Related

Cisco VPN :: ASA 5510 - Open A Small Office?

Feb 19, 2013

for your recmmendation, on what type of equipment should I use in a Small Office probably around 50-100 users.Feature sets that I would want are: VPN - 5 VPN Peers for L2L connectivity and 50 SSL VPN connections, Firewall, Active-Standby Fail-over.

I'm on a limited budget, ASA 5510 with Security Plus License can give me this but its a bit expensive.Is there something else that you guys can recommend. ISR maybe?

View 2 Replies View Related

WRT54G2 Bridging Small Office Network

May 4, 2011

My office just moved to a bigger location, and we are having trouble with network connectivity.

Current layout: Modem --- Wired-----> 2wire 5012NV ------wired/wireless----> PCs

The 2wire is at one end of the office, and PCs at the other end experience poor wireless connectivity.I'm thinking of using a spare WRT54G2 in "bridged" mode, to extend the Ethernet, and wireless of the main router.

For wired bridging, I understand that that the WRT54G2 will do, is act as a "port multipler", where 1 port from the 2wire can be multiplied into 4. I also want the wrt54g2's wireless to extend the Ethernet connection (not extend the wireless connection).

View 4 Replies View Related

Small Office Network - NAS And Internet Access From Both Offices?

Apr 26, 2011

I have a cable modem in the basement and ethernet lines to two offices upstairs.I have a 4-port wireless router and a 5-port switch. I have a computer in each office and a NAS in one of the two offices.There is no direct wiring between the offices. I want to have internet access and access to the NAS from both offices. Will the following configuration work without having to go to Static IPs? 1) Modem01-> Router01->Switch01->Computer01; 2) Modem01->Router01->Switch01->NAS01; 3) Modem01->Router01->Computer02. If not, what needs to change?

View 3 Replies View Related

Network Setup For Small Office With Peer Or Server Based

Apr 13, 2011

XYZ Corporation currently employs eight people but plans to hire 10 more in the next four months. Users will work on multiple projects, and only those users assigned to a project should have access to the project files. You’re instructed to set up the network to make it easy to manage and back up. Would you choose a peer-to-peer network, a server-based network, or a combination of both?

View 1 Replies View Related

Cisco LAN :: 3550 Simulating Small Branch Office In Lab Network

Jun 6, 2012

I have to setup what seems to be a very basic configuration, but it doesn't work. In our lab there is a cluster of switches with a 3550 that does all the routing for vlans. I need to simulate a sort of a small branch office that has one connection to the outside world (the lab network). [code] From the router I can ping any host on vlan 230 and other vlans,I can also ping the pc connected to e0/1.However from the PC I can only ping 192.168.1.1(e0/1) and 172.26.230.150 (e0/0) [code]

View 3 Replies View Related

Security / Firewalls :: Kaspersky Small Office Or AVG File Server Edition 2012?

Aug 20, 2012

I can't seem to figure out which one I should go for. I'm thinking Kaspersky would have greater security but I'm not familiar with AVG's server level security.I don't need all the bells and whistles such as file encryption or password storage. I'm simply after a really strong AV for the server. Another one is VIPRE although I've heard it can take a while to configure it unlike Kaspersky which is pretty straight forward.

View 1 Replies View Related

SMCD3G Cable Modem / Belkin Play N600 Router - Small Office Network?

Apr 21, 2011

I'm trying to network a small office and have the following devices:

SMCD3G Cable Modem
Belkin Play N600 Router
Digi Mil-H1130 8 Port Ethernet SOHO Hub
Hubbel Cat5 Patch Panel (goes up to 12)

We're replacing our DSL line with a Cable line. Our DSL was a one piece wireless router/modem. When it was installed, it was inside our office, next to the server, and plugged into Wall Jack 1 for all the other computers to connect to. Our server plugged into this modem/router. We didn't have the Belkin Router at the time. The Patch Panel wires went into the Hub behind our office and everything was fine.

The cable modem is now next to the Hub and Patch Panel. I bought the router since we didn't have the wireless feature that the DSL had and everyone I spoke to said I need a router to set up the office. I ran one of the LAN lines from the modem into the Router where it says Modem (WAN). From the Router, I ran the line 1 (LAN) into the Hub. (Does the number matter if nothing is plugged into it in our office?) No computer is able to connect to the internet except my laptop which connects wireless. It works fine.

Another problem. We have a server computer that's Unix based. In order for anyone to connect to the server to access the office software used, the IP address of the router must be 192.9.2.1 or the computer your using won't connect via Multiview 2000 Terminal Emulator. I can't connect to the server because the IP address of the router is still 192.168.2.1. I don't know where I have to go in the router settings to change it. I've tried a few spots and it tells me the IP address is invalid. The settings I had with the DSL modem/router were:

Modem IP address - 192.9.2.1
Subnet Mask - 255.255.255.0
DHCP Start Address - 192.9.2.100
DHCP End Address - 192.9.2.150

It's not like I need to run wires. Everything is set. If something is plugged into a wrong spot, I can switch it.

Additional info:
There are 4 computers in the office and 8 numbered wall jacks.
Server computer - Wall jack 8 (IP address of this machine - 192.9.2.25)
XP Machine 1 - Wall jack 4 (can't connect to server! No internet.)
XP Machine 2 - Wall jack 1 (Is able to connect to the server! No internet.)
Win CE Machine - Wall jack 9 -

I assume. I have a wire that goes through the wall on this machine and it isn't marked. (Rarely used so not sure about server connection)

Wireless Windows7 laptop - connects to the internet fine since it bypasses all these wires. Can't connect to server.

Under the DHCP client list, only 2 computers are listed. The one that has internet is my computer. The other computer listed is wall jack 4 and that has internet now.

my computer - 192.9.2.2
wall jack 4 - 192.9.2.3

The router IP is 192.168.2.1 and the Cable Modem is 10.1.10.11. If I type either number into my web browser it will take me to the router setup page. I don't know where/how to check if it's only one device acting as DHCP. What I want to do is be able to get online with all the computers as well as have access to the software on the server through the office wall jacks. In order to do that I need the router IP address to be 192.9.2.1 and then I'd be able to connect to it.

Right now, one computer is able to connect to the server via hard wire but can't connect to the internet.Another computer is able to connect to the internet via hard wire but can't connect to the server.My laptop can connect wireless to the internet but not the server. In a perferct world, all the computers should be able to connect to both the internet and the server. Right now, it's one or the other with both hard wired machines and I don't know why. Is there a wire not in the hub right? Is a patch panel wire plugged into the wrong port of the hub? I don't know what's supposed to go where. tell me "wire X from the modem goes to Port Z of the router, and Wire Y from the the router goes to number V on the Hub, and that wire goes to number T on the patch panel for the Port number R in the office to work..." I'll try it.

Then I think all I need to do is change the router's IP address to 192.9.2.1 and everyone should be able to connect to the server through the Multiview 2000 Terminal Emulator.When I tried to change the IP address on the router it's telling me it's not valid. Under LAN settings it says 192.168.2.1 - when I try to change it to 192.9.2.1 it tells me LAN IP address is invalid. I clicked on More Info below that in the router page and a pop up gives me info. It says:

The "IP address" is the Internal IP address of the Router. To access the advanced setupinterface, type this IP address into the address bar of your browser. This address can be changed if needed. To Change the IP address, type in the new IP address and click "ApplyChanges". The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:

192.168.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)

10.y.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)

172.z.y.x (where z is anything from 16 to 31, and y is anything between 0 and 255, and x is anything between 1 and 254.)

View 4 Replies View Related

Wifi (wrt54gs) Router Woes In Office Networking?

Sep 21, 2012

I have a small office with a Desktop PC onvereted into a File server which has licenses for couple of multi user softwares residing. Further I have about 10 Laptops and 3 Desktops.My server has two NIC's. A linksys wireless (wrt54gs) router is connected to one NIC and a Netgear WL router is connected to another NIC. I have enabled MAC Address access restriction on both the routers.5 laptops get connected to the Wifi Linksys router. And to the Negear Router 5 more laptops + a Netwrok printer with static IP and a switch (unmanaged) is conneted. 3 desktops (all with static IP) in turn get connected to this switch.Iam not able to give print from a Laptop connected to the Linksys router. However the print comes out if I give a print out from a laptop connected to the negear router.The Linksys Router assigns IP starting from 192.168.0.10 to 192.168.0.25 and the netgear assigns IP from 192.168.0.101 to 192.168.0.125. Further at times the laptops connected to the Netgear routers are not able to obtain the license for the softwares from the server (in variably Iam forced to work in Educational mode on those laptops)(I created a netwrok bridge in the server between the two NICs)But by enabling a bridge there is one more problem I notice..... When I type IPCONFIG /all on a laptop connected to the Netgear ruter (having gateway 192.168.0.100), I notice that the IP number assigned is that of the one from Linksys, and the Gateway is shown as (192.168.0.75 - the Linksys router gateway)....

View 2 Replies View Related

Implement Networking In Three Floor Office By Using Routers And Switches?

Apr 24, 2011

How can i implement networking in my THREE floor office by using routers and switches?

View 1 Replies View Related

Cisco WAN :: 815 / Connect To Internet Small Office Where Docsis (internet Over Tv Cable) Is Used As WAN

Aug 12, 2011

I want to connect to the Internet small office where docsis (internet over tv cable) is used as WAN.For similar tasks but other WANs (adsl, dial-up) I used 800 series. But now I can't find anything in this series to solve my issue. There is 815 but it has no wi-fi.
 
I can use cable modem that my ISP gave to me: this modem acts as bridge so I can use router with FE-based WAN but it is better to have one device instead of two.

View 3 Replies View Related

Cisco Wireless :: WAP321 Setting Up Wireless Network For Small Office

Jan 13, 2013

I'm setting up a wireless network for a small office with 25 people with approx. 15 on wireless at any time. The office is very long and skinny so I'm looking at a cluster of WAP321's. I'm hoping these will save a ton of money versus buying a controller and more expensive access points.
 
How do these work for roaming? I tried a search but I've found descriptions of them not roaming at all and descriptions of them roaming but you have to do some kind of pre-authorization right up to they roam with no user interaction, they just roam.
 
I need the users to be able to roam around the office with no interruption. I don't want to install these and have to rip them out later and put in new ones and a controller. How to find out if the WAP321's will work for roaming.

View 4 Replies View Related

WRT54G2 - Connect Two Sets Of Computers Within Home Office?

Jan 26, 2012

I have a group of five computers at one end of my home office and another group of four computers across the same room. All are hardwired on the same internal network. These cannot be consolidate or moved into one corner or closet. There just is not the space and it's just physically not possible.There is one Internet router as provided by the local cable company. I have this connected to a LinkSys WRT54G2 broadband router. A Netgear DS108 8-port hub is connected the LinkSys. All computers either connect to the Netgear hub or to the LinkSys router. As of now, the WiFi from the LinkSys router is only ever used by my cell phone while at home.

This set up is annoying. At first I did not mind, but there are cables on the floor that I have to step over. These CAT5 cables connect one set of computers to the LinkSys or Netgear. I have to watch where visitors are walking or stepping to assure they don't trip.How can I keep these computers on the same network and eliminate just those cables crossing the floor of my home office?Should I use WiFi NICs? Would this overwhelm the WiFi on the LinkSys?

View 10 Replies View Related

Linksys Wireless Router :: Wrt54gs / Setup Local DNS Server To Manage Small Office Local-only Domain Names?

Apr 22, 2012

i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.

View 1 Replies View Related

Networking Two Home Computers Using 2 Wire Modem?

Jul 13, 2011

I am trying to establish a home network for an HP laptop running Windows 7 wirelessly to a 2wire modem for file sharing with my Vista PC. My laptop recognizes the 2wire network but Vista won't.Do I need to download drivers or adjust any firewall settings?

View 11 Replies View Related

Home Network :: Best Option For Networking Two Computers With Only Hotspot?

Oct 30, 2012

I am working with a friend who has a home office that is not in a location where DSL or Cable is available. His only option for internet is using a hotspot - in this case, the Elevate Hot Spot from AT&T.

He needs to network two computers so that he can enable QuickBooks Pro in multi user mode - i.e., data file shared on Computer A, accessed by Computer B.

I thought at first that perhaps I could just setup a wireless connection for the office network - however, whenever that connection is on, then obviously neither computer can access the hotspot.

Trying to keep this at *minimal* cost.

My best idea is to old school network - i.e., connect the two computers via crossover ethernet. Am I correct that this will work? Seems to me that then both computers *should* still be able to access the hotspot via their wifi, yet also be networked for file sharing.

My questions are:

1.) Is this a correct assessment?

2.) Are there any road blocks I should be thinking about?

3.) Any reason not to do a direct connection (i.e., any reason I should entertain connecting to a switch instead?)

4.) Is there a certain order I should do things?

View 2 Replies View Related

Small Network / Random Computers Lose Browsing At Random Times?

Dec 29, 2012

Network running about 60 computers, most of which are running windows 7 professional. Some are on a domain, some are not.At (seemingly) random times, some computer on the network will lose the ability to browse websites (including the web interfaces of networked devices). I can't identify what circumstances cause this to occur. I only find out about it when someone calls me.From the affected computer:I can ping sites I can ping our Cyberoam UTM (which acts as our DNS, DHCP, and firewall)disabling/enabling connection doesn't fix the problem releasing/renewing ip doesn't fix the problem flushing dns doesnt fix the problem uninstalled antivirus on two test machines, problem still randomly manifests.replaced the Cyberoam with newer model users have claimed that if they wait a long period of time (40+ minutes) the problem sometimes resolves.rebooting the computer resolves the issue until it randomly occurs again changing the computer's mac address also resolves the issue until it randomly occurs again.

View 3 Replies View Related

Cisco VPN :: Configure Setup With 2 Srp527 At Office And Home

Sep 2, 2012

I have recently managed to configure a setup where I have 2 srp527's one at office one at home.Have 1 fixed IP at the office and 1 fixed ip at home.I have configured the srp at work to be a vpn server and have configured the group and 2 user profiles. This allows me to have 2 concurrent sessions over the vpn to my office from desktop and laptop at the same time. Connections fire up perfectly no problems.From the desktop, I connect using vpn client with user profile 1 Once connected, I then connect to my workstation machine at the office using remote desktop.This gets me super fast access to office files and large spreadsheets without downloading the whole file over the vpn and is working perfectly.
 
If I then additionally connect from the laptop using the vpn client with user profile 2 the remote desktop connection drops.Disconnect the laptop connection, remote desktop comes back.Have isolated this to being 2 connections arriving at the srp at the office from the same external ip. If I connect my laptop to my phone as a hotspot rather than using my home LAN, both connections are made and remote desktop has no interruptions. Is there a way I can overcome this through re-configuration of the srp at the office or is this a limitation with the srp?

View 1 Replies View Related

Cisco VPN :: ASA5510 Best Place To Configure Outbound QoS From Main Office

Jun 10, 2012

We have a main office and 4 remote offices (only showing 1 remote office in the diagram). We are using GRE over IPSec VPNs to the remote offices which terminate on the 2811 router in the main office. We are using the 2811 as it is the only device that we have that can terminate GRE. The 2811 router is connected to the outside switch and is configured with a public IP address. We also have a ASA5510 in the main office which is connected in the same manner and is used for Web, e-mail traffic etc.Both the main office and remote offices have a 10Mbps Internet connection.
 
We have an issue with voice quality between sites as we are finding it difficult to control bandwidth utilization in the main office. When users in the main office download web content it can saturate the 10Mbps Internet connection causing voice quality issues. We have configured outbound shaping on the branch routers to make sure that aggregate inbound traffic from all branches to the main office does not saturate the link but we cannot control traffic from the Internet.I understand that controlling inbound traffic from the Internet is difficult without controlling QoS on the ISPs side. Is there any way that can reserve inbound bandwidth to ensure that web traffic does not impact voice? Also in this design, which is the best place to configure outbound QoS from the main office?

View 4 Replies View Related

How To Configure Two Computers Internet

Apr 7, 2012

I am having problem in configuring two computer in point to point to have internet connection on windows xp

View 2 Replies View Related

Cisco Application Networking :: Possible In ACE4710 Appliance To Configure A SIP TLS

Feb 11, 2013

Do you know if it is possible in ACE 4710 appliance to configure a SIP TLS ?The SIP probe we have in the configuration guide it is only for clear text. for Lync 2013 we need to establish first a TLS session and then within it, send an SIP request..IS it possible in any version? I tried also to configure a HTTPS probe but it fails as it sends a GET which the Lync SIP server doesn't understand.

View 1 Replies View Related

Configure Ipsec In Local Lan Between 3 Computers?

Sep 13, 2011

I need to connect 3 computers in local lan by using ipsec on win7. How can I do that? I tried to do something from windows firewall; but I see incorrect header checksum errors in wireshark.

View 4 Replies View Related

How To Configure Router To Redirect All Internal Computers

Mar 21, 2012

How to Configure Router to redirect all internal computers to redirect to a particular website..

View 1 Replies View Related

Cisco Application Networking :: ACE 4710 - How To Configure HTTP Rewrite Request / Response

Sep 18, 2011

We want to mask part of the path prefix to hide development content: For example: the site(s) are: [URL]However we don't want anything with acme showing...so we would want the loadbalanced url to be: [URL] ...for requests and responses. I think this would be an http re-write request/response scenario?Is this possible to configure this on the ACE Device? We've got the load balance configuration down...not sure how to do this re-write type scenario?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved