WRT54G2 Bridging Small Office Network

May 4, 2011

My office just moved to a bigger location, and we are having trouble with network connectivity.

Current layout: Modem --- Wired-----> 2wire 5012NV ------wired/wireless----> PCs

The 2wire is at one end of the office, and PCs at the other end experience poor wireless connectivity.I'm thinking of using a spare WRT54G2 in "bridged" mode, to extend the Ethernet, and wireless of the main router.

For wired bridging, I understand that that the WRT54G2 will do, is act as a "port multipler", where 1 port from the 2wire can be multiplied into 4. I also want the wrt54g2's wireless to extend the Ethernet connection (not extend the wireless connection).

View 4 Replies


ADVERTISEMENT

Setting Up A Network In A Small Office?

Oct 17, 2011

My current set-up is: my laptop connects to the coaxial outlet with a cable so I can access the internet. So I can't really bring it somewhere else since the cable is short.

Now, I am planning to buy 2 more computers and a printer. The printer will be shared by all 3 computers. what else I need to buy (modem?? wireless router??) and what type. I also request that you let me know how to set it up. Of course, I will follow the manufacturer's instructions.

View 15 Replies View Related

Small Office Network - Connect Three PCs Together?

Apr 4, 2013

I would like to connect my three pcs together so that they can all make use of the printers, scanners, internet etc in my office space. i also need to be able to access this lot from a remote laptop so that i can continue to work from home. i would like to store all my data in one place that was easily accessible from every PC and my laptop.

View 2 Replies View Related

How To Create A Small Office Network

Jul 26, 2012

How do I create a small office network?

View 1 Replies View Related

Small Office Network Setup?

Feb 21, 2011

I have been tasked with the technology update of our office and have have MAJOR questions which I hope can be answered here, so here goes;

First a little history, I have an electronics degree and a certificate in computer technology, so computers are not something new to me, however networking IS.I have a VERY LIMITED budget to work with, which I'm sure is not unheard of before, with the following equipment already available:

1 MFP currently on lease connected via network
3 totally junk PCs running 3 different versions of Windows from XP to 7
A DSL internet connection
A wireless router
A wired 8 port switch

What I would like to do is begin with a basic server, 7 clients, shared internet on all machines (including external via login), An MFP, at least 1 NAS for data storage, 1 NAS for backup of all drives.

View 3 Replies View Related

Network Setup For Small / Medium Office?

Aug 14, 2011

What are the best network engineering practises for a small/medium sized office?Currently I have set it up like this:The top floor has all the sales people, each desk has a hub underneath which connects all computers at that desk together, and the hum is connected to a switch under the floor. There are about about 8 desks each with about 4 computers, so 8 hubs.They all go into a 10/100 switch, which is then connected to an 1gb switch on the bottom floor via a 1gb port on the top floor switch, via a cat6 cable.We then have internet > modem > router > the 1gb switch. Our main server is also connected to that switch along with all the computers for the ground floor, except these computers have 1gb switches under the desks instead of hubs. The main server is the DHCP, DC, DNS and file server. We have also setup another server which acts as a backup DC and is also a DNS server.Is there anything wrong with this configuration? We have been having problems with the router losing connection to the internet and warnings on the main DNS server.

View 6 Replies View Related

Steps Of Creating A Network In A Small Office

Jan 11, 2013

How do I go by setting up a small network in my office with 3 computer. Reason is to share files, printers, internet.

View 1 Replies View Related

Small Office Network - NAS And Internet Access From Both Offices?

Apr 26, 2011

I have a cable modem in the basement and ethernet lines to two offices upstairs.I have a 4-port wireless router and a 5-port switch. I have a computer in each office and a NAS in one of the two offices.There is no direct wiring between the offices. I want to have internet access and access to the NAS from both offices. Will the following configuration work without having to go to Static IPs? 1) Modem01-> Router01->Switch01->Computer01; 2) Modem01->Router01->Switch01->NAS01; 3) Modem01->Router01->Computer02. If not, what needs to change?

View 3 Replies View Related

Network Setup For Small Office With Peer Or Server Based

Apr 13, 2011

XYZ Corporation currently employs eight people but plans to hire 10 more in the next four months. Users will work on multiple projects, and only those users assigned to a project should have access to the project files. You’re instructed to set up the network to make it easy to manage and back up. Would you choose a peer-to-peer network, a server-based network, or a combination of both?

View 1 Replies View Related

Cisco LAN :: 3550 Simulating Small Branch Office In Lab Network

Jun 6, 2012

I have to setup what seems to be a very basic configuration, but it doesn't work. In our lab there is a cluster of switches with a 3550 that does all the routing for vlans. I need to simulate a sort of a small branch office that has one connection to the outside world (the lab network). [code] From the router I can ping any host on vlan 230 and other vlans,I can also ping the pc connected to e0/1.However from the PC I can only ping 192.168.1.1(e0/1) and 172.26.230.150 (e0/0) [code]

View 3 Replies View Related

SMCD3G Cable Modem / Belkin Play N600 Router - Small Office Network?

Apr 21, 2011

I'm trying to network a small office and have the following devices:

SMCD3G Cable Modem
Belkin Play N600 Router
Digi Mil-H1130 8 Port Ethernet SOHO Hub
Hubbel Cat5 Patch Panel (goes up to 12)

We're replacing our DSL line with a Cable line. Our DSL was a one piece wireless router/modem. When it was installed, it was inside our office, next to the server, and plugged into Wall Jack 1 for all the other computers to connect to. Our server plugged into this modem/router. We didn't have the Belkin Router at the time. The Patch Panel wires went into the Hub behind our office and everything was fine.

The cable modem is now next to the Hub and Patch Panel. I bought the router since we didn't have the wireless feature that the DSL had and everyone I spoke to said I need a router to set up the office. I ran one of the LAN lines from the modem into the Router where it says Modem (WAN). From the Router, I ran the line 1 (LAN) into the Hub. (Does the number matter if nothing is plugged into it in our office?) No computer is able to connect to the internet except my laptop which connects wireless. It works fine.

Another problem. We have a server computer that's Unix based. In order for anyone to connect to the server to access the office software used, the IP address of the router must be 192.9.2.1 or the computer your using won't connect via Multiview 2000 Terminal Emulator. I can't connect to the server because the IP address of the router is still 192.168.2.1. I don't know where I have to go in the router settings to change it. I've tried a few spots and it tells me the IP address is invalid. The settings I had with the DSL modem/router were:

Modem IP address - 192.9.2.1
Subnet Mask - 255.255.255.0
DHCP Start Address - 192.9.2.100
DHCP End Address - 192.9.2.150

It's not like I need to run wires. Everything is set. If something is plugged into a wrong spot, I can switch it.

Additional info:
There are 4 computers in the office and 8 numbered wall jacks.
Server computer - Wall jack 8 (IP address of this machine - 192.9.2.25)
XP Machine 1 - Wall jack 4 (can't connect to server! No internet.)
XP Machine 2 - Wall jack 1 (Is able to connect to the server! No internet.)
Win CE Machine - Wall jack 9 -

I assume. I have a wire that goes through the wall on this machine and it isn't marked. (Rarely used so not sure about server connection)

Wireless Windows7 laptop - connects to the internet fine since it bypasses all these wires. Can't connect to server.

Under the DHCP client list, only 2 computers are listed. The one that has internet is my computer. The other computer listed is wall jack 4 and that has internet now.

my computer - 192.9.2.2
wall jack 4 - 192.9.2.3

The router IP is 192.168.2.1 and the Cable Modem is 10.1.10.11. If I type either number into my web browser it will take me to the router setup page. I don't know where/how to check if it's only one device acting as DHCP. What I want to do is be able to get online with all the computers as well as have access to the software on the server through the office wall jacks. In order to do that I need the router IP address to be 192.9.2.1 and then I'd be able to connect to it.

Right now, one computer is able to connect to the server via hard wire but can't connect to the internet.Another computer is able to connect to the internet via hard wire but can't connect to the server.My laptop can connect wireless to the internet but not the server. In a perferct world, all the computers should be able to connect to both the internet and the server. Right now, it's one or the other with both hard wired machines and I don't know why. Is there a wire not in the hub right? Is a patch panel wire plugged into the wrong port of the hub? I don't know what's supposed to go where. tell me "wire X from the modem goes to Port Z of the router, and Wire Y from the the router goes to number V on the Hub, and that wire goes to number T on the patch panel for the Port number R in the office to work..." I'll try it.

Then I think all I need to do is change the router's IP address to 192.9.2.1 and everyone should be able to connect to the server through the Multiview 2000 Terminal Emulator.When I tried to change the IP address on the router it's telling me it's not valid. Under LAN settings it says 192.168.2.1 - when I try to change it to 192.9.2.1 it tells me LAN IP address is invalid. I clicked on More Info below that in the router page and a pop up gives me info. It says:

The "IP address" is the Internal IP address of the Router. To access the advanced setupinterface, type this IP address into the address bar of your browser. This address can be changed if needed. To Change the IP address, type in the new IP address and click "ApplyChanges". The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:

192.168.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)

10.y.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)

172.z.y.x (where z is anything from 16 to 31, and y is anything between 0 and 255, and x is anything between 1 and 254.)

View 4 Replies View Related

Cisco Wireless :: WAP321 Setting Up Wireless Network For Small Office

Jan 13, 2013

I'm setting up a wireless network for a small office with 25 people with approx. 15 on wireless at any time. The office is very long and skinny so I'm looking at a cluster of WAP321's. I'm hoping these will save a ton of money versus buying a controller and more expensive access points.
 
How do these work for roaming? I tried a search but I've found descriptions of them not roaming at all and descriptions of them roaming but you have to do some kind of pre-authorization right up to they roam with no user interaction, they just roam.
 
I need the users to be able to roam around the office with no interruption. I don't want to install these and have to rip them out later and put in new ones and a controller. How to find out if the WAP321's will work for roaming.

View 4 Replies View Related

Sharing :: Small Office Setup With 50 PCs

Jun 25, 2012

I was into IBM iSeries all these years (15 years) and just got into Microsoft Programming(.NET) I have done a program in csharp.net which gets input from the users and dump it into a database. 50 users are going to do the data entry with just one database. As I dont have much knowledge on sharing/accessing applications/database in a network environment (PC based).

View 1 Replies View Related

Configure Small Office Of About 5 Computers To Have LAN Networking?

Jun 4, 2012

How i can configure my small office of about 5 computers to have LAN Networking?

View 1 Replies View Related

Cisco VPN :: ASA 5510 - Open A Small Office?

Feb 19, 2013

for your recmmendation, on what type of equipment should I use in a Small Office probably around 50-100 users.Feature sets that I would want are: VPN - 5 VPN Peers for L2L connectivity and 50 SSL VPN connections, Firewall, Active-Standby Fail-over.

I'm on a limited budget, ASA 5510 with Security Plus License can give me this but its a bit expensive.Is there something else that you guys can recommend. ISR maybe?

View 2 Replies View Related

Servers :: Small Office Networking With File Sharing For Certain Users?

Feb 4, 2012

Right now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?

View 1 Replies View Related

Cisco Switching/Routing :: How To Configure The 887 In Small Home Office

Apr 6, 2012

i have a cisco router 887 which i am trying to configure. but however, do i really need to use the SDM utility or i can do it through CLI?i need to replace my current router in my small home office.

View 3 Replies View Related

WRT54G2 - Connect Two Sets Of Computers Within Home Office?

Jan 26, 2012

I have a group of five computers at one end of my home office and another group of four computers across the same room. All are hardwired on the same internal network. These cannot be consolidate or moved into one corner or closet. There just is not the space and it's just physically not possible.There is one Internet router as provided by the local cable company. I have this connected to a LinkSys WRT54G2 broadband router. A Netgear DS108 8-port hub is connected the LinkSys. All computers either connect to the Netgear hub or to the LinkSys router. As of now, the WiFi from the LinkSys router is only ever used by my cell phone while at home.

This set up is annoying. At first I did not mind, but there are cables on the floor that I have to step over. These CAT5 cables connect one set of computers to the LinkSys or Netgear. I have to watch where visitors are walking or stepping to assure they don't trip.How can I keep these computers on the same network and eliminate just those cables crossing the floor of my home office?Should I use WiFi NICs? Would this overwhelm the WiFi on the LinkSys?

View 10 Replies View Related

Security / Firewalls :: Kaspersky Small Office Or AVG File Server Edition 2012?

Aug 20, 2012

I can't seem to figure out which one I should go for. I'm thinking Kaspersky would have greater security but I'm not familiar with AVG's server level security.I don't need all the bells and whistles such as file encryption or password storage. I'm simply after a really strong AV for the server. Another one is VIPRE although I've heard it can take a while to configure it unlike Kaspersky which is pretty straight forward.

View 1 Replies View Related

Cisco WAN :: 815 / Connect To Internet Small Office Where Docsis (internet Over Tv Cable) Is Used As WAN

Aug 12, 2011

I want to connect to the Internet small office where docsis (internet over tv cable) is used as WAN.For similar tasks but other WANs (adsl, dial-up) I used 800 series. But now I can't find anything in this series to solve my issue. There is 815 but it has no wi-fi.
 
I can use cable modem that my ISP gave to me: this modem acts as bridge so I can use router with FE-based WAN but it is better to have one device instead of two.

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gs / Setup Local DNS Server To Manage Small Office Local-only Domain Names?

Apr 22, 2012

i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.

View 1 Replies View Related

Bridging Wired And Wireless Network In XP?

Jan 13, 2013

I have a desktop connected to a wireless network. I have a router that will be used to allow open access to the internet without allowing direct access to the existing network, There is no ethernet connection in the area and this router was ree with limited features. So no Wifi as WAN I want to use the desktop's ethernet NIC to obtain a WAN connection. For now I can not setup a VLAN and must configure the two networks as poorly described. Sadly I am not familiar with bridging connections in XP and am unsure about specifics. Also, as a quick test, I bridged the connections and lost wireless connectivity.

View 14 Replies View Related

Home Network :: How To Setup Wireless Bridging

Sep 11, 2012

I have this setup at home and I can't make wireless bridging to work with two WR740N routers.I tried 3 online tutorials and none of them worked

R1,R2,R3 = routers
The main router "R1" Is setup like this :
IP Address 192.168.100.1
DHCP enabled 192.168.100.120 - 192.168.100.150
Gateway 192.168.100.1

[code]....

View 1 Replies View Related

Set Up Small Business Network?

Nov 16, 2012

I'm involved in setting up a new office for a business that's just starting out. I have some computer experience but not a whole lot in networking and security. We just have 3 people that will be working in the office and we need a way to store/backup/share files on the network as well as a way to access them remotely if need be. Our internet service is going to be providing us with a static IP. I was thinking that we could use an NAS with RAID 1 attached to the router, which is in turn connected to the cable modem, but I'm not sure if this is secure. Do we need some type of hardware firewall in between the cable modem and the router to protect us from the outside?

View 2 Replies View Related

Set Up A Small Switched Network?

Feb 16, 2012

i must admit that i have very little experience in networking and i have just started cisco CCENT.i have a problem with setting up a small switched network i have a cisco 2960 layer 2 switch,2 workstations 2 straight through(patch)cables.I have connected the above setup but still i cant verify network connectivity by using ping command, the problem is assigning ip addresses and configuring interface internet connections

View 3 Replies View Related

Home Network :: ARRIS TM822 - Bridging Cable Broadband Modem To Router

Feb 18, 2013

i have an ARRIS TM822 cable modem provided by comcast, in addition i have a linksys e3000 wireless router. what i am trying to accomplish is to bridge the cable modem over to the router. i messaged comcast about this issue and i have attempted what they told me to do, but im not getting any where.

View 1 Replies View Related

Small Business Network LAN Is Very Slow?

Sep 30, 2011

I just took a position and never had to work with networks that much before. Our lan is very slow and trying to figure out why. We have verizon business class 3 t1 lines dedicated 4 M. When I do a speed test we get about 4.05 average and 4.23 down. We have 11 computers on the network connected to a Dell power connect 2716. We have Two network printers and that is it. We are having problems with it being very slow when connecting to a share on the server or using RDP.

View 4 Replies View Related

Designing A Small Home Network

Mar 7, 2012

I need to connect 4 desktops wired 2 laptops wireless, one led TV wired.I have beam 10mbps internet and I want to share it to all devices.I want one desktop to act admin for internet sharing on all other devices.

View 1 Replies View Related

Small Business Network Is Non Responsive

Jun 3, 2011

I work for a small business of five computers. We have a wireless network for internet traffic, and a wired network for file sharing. The wireless network works great for using the internet, but we are having trouble with the wired network.The issue is being able to communicate with all of the computers on the wired network. The ability to speak with all of the computers on the network is hit or miss. Generally, computer A can speak with computer B, C, and D, but D can only speak with A.

View 4 Replies View Related

Setting Up Small Home Network

Mar 4, 2012

I am buying a router with wireless soon and i am setting up an ADSL account.I only have one computer that will connect to this router.The router will be based in the living room area where the phone line is.My room (where the computer is situated) is quite far from the living room and i am not keen to drilling holes through roofs to wire some LAN cable.My plan is to use a wireless dongle in my pc to connect to the router for internet. Will this affect the speed of my downloads off the internet at all? will it be the same as if i was using a lan cable?I know file sharing over the network via WAN is slow but will my internet be?

View 1 Replies View Related

How To Setup Small Home Network

Sep 5, 2012

How would I go about setting up a network at my house. I have two desktops and a netbook all hooked to a switch and the switch to the router.

View 2 Replies View Related

Setting Up A New Network For A Small Business?

Feb 13, 2012

He currently has 1 server, and 11 workstations, he also has a network switch that we will be replacing.We have picked out a Dell server, running Windows Server 2008 R2 that will be used as the main file server, as well as the domain controller. Where I seem to be confused is on setting up the networking component, particularly how the machines will get IP addresses. As mentioned, I will be purchasing a new Ethernet switch, in order to get the fastest LAN speed possible; I have selected the Dell PowerConnect 2816, which is a 10/100/1000Mbs switch. My question is, will I be letting the switch handle the IP's/DHCP or would I be better off, setting up the server for DHCP? If so, do I also setup the server as the DNS server? From what I am reading online using the server as the DHCP/DNS server gives us more management capabilities and is more "secure". As a test, I loaded Windows Server 2008 R2 on a home machine and played around with this. I got a bit lost on the DHCP and DNS setup and it appears that one needs a Static IP from your ISP in order to setup your serve as the DHCP/DNS server for the domain. Is this correct? I haven't been to his office yet to check out all the existing equipment, is it safe to assume that his ISP provides a router or whatever is needed to feed the switch?

View 3 Replies View Related

Cisco WAN :: C890 Bgp Small Network

Dec 21, 2011

I have a c890 switch is a default gateway for the lan behind it. The router is configured with bgp for 2 providers and local network is /24 rout able network (92.224.1.0/24). I think bgp is configured correctly because I can ping any ip from the router (92.224.1.1), for example I can ping 8.8.8.8.
 
The problem is that I can not ping anything from the local network, from example I can not ping 8.8.8.8 (Google dns) from 92.224.1.2. 

92.224.1.2 has as default gw 92.224.1.1. 
92.224.1.2 -> 92.224.1.1 -> BGP 2 ISP's

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved