Cisco VPN :: Connecting To ASA5505 From Home To Head-office Using L2TP VPN
Jul 16, 2012
I am connecting to a ASA5505 at from home to the head-office using L2TP VPN.
Head-office then has a connection to other-office via a site-to-site IPSEC tunnel.
When in the head-office (192.168.100.0/24) I can ping/access remote-office (192.168.200.0/24) OK.
When connected remotely to head-office, I can ping/access head-office OK from the road-warrior laptop.
My problem is that when connected remotely from home to the head-office I cannot ping/access the other-office subnet.
On the home laptop the L2TP VPN connection is set to route all traffic to the VPN connection using the HQ as the internet gateway I can confirm this works.
I cant do traceroute (I get timeouts) as my policy doesnt allow and not sure how to enable this properly on the ASA.
names
name 192.168.200.0 othersite
!
interface Vlan1
nameif inside
security-level 100
[code]....
View 1 Replies
ADVERTISEMENT
Apr 17, 2012
I have 3 AIR-CAP3502I-E-K9 AP’s on my network now. Its connected directly to a cisco L3 switch now. and through a WAN link it communicates to a cisco 5505 WLC at remote head office (flexconnect).I want to install a low end WLC on my office, so that incase of the WLC fails at head office, still the clients on my end able to connect to the AP .So which of the following models are support for the AIR-CAP3502I-E-K9 APs ? and can that’s WLC talk with the other one at head office(WLC 5505) ?
View 1 Replies
View Related
Jan 8, 2012
One of my remote office router model is Cisco 2801. Unfortunately I forgot the telnet/vty password of that router. I am sitting 500 KM distance in between in the Head Office. I can ping the router but due to lost password I cannot login to the router. Moreover I dont have snmp enabled in that router. Is there anyway I can reset the router's password remotely from my head office. Additionaly I have a switch directly connected to the router and I can ping and login to the swtich but not the router. I am writing this about the switch or resetting the routers password anyway.
View 1 Replies
View Related
Jul 23, 2012
I want to implement site to site vpn among our Head Office and Barnch routers (300 Sites).Head Office Site I have a cisco 7200 Router Im going to terminate the VPN conection on that.Branches we are having cisco 1841 series routers. They all are capable of working with VPN.In the present it is act like a EazyVPN Server for selected sites(30 sites).Is there any license limitations in Cisco 7200 Router ?Can I run both Site to site VPN and Eazy VPN Server together ?
View 1 Replies
View Related
May 25, 2011
I have a Windows 2003 server running a L2TP VPN server on it. I'm putting theASA5505 in replacement of an open source firewall.
My question is that, I can't seem to forward the ports correctly for L2TP to the internal address of the 2k3 VPN server. It seems to me that the ASA is trying to negotiate the VPN connection rather than forward it internally.
Cisco ASA5505
WAN 216.136.1.2
LAN 10.1.1.1/24
Windows server - 10.1.1.14
I've added the NAT and ACL and still nothing.
View 2 Replies
View Related
May 9, 2013
I have a Any Connect setup and able to VPN into my office.i bought a ASA5505-SW-UL that is unlimited user (UL) software license but now the vendor tells me that: From the ASA you can saw the unlimited license is for inside hosts, instead VPN client's, by default, ASA 5505 included only 2 VPN client's and can supported up to 25 VPN client's, your license look only default 2 VPN client's. If need more VPN client's connect, you have to purchase the additional VPN client's license. I am just wondering his statement TRUE/FALSE, because i thought ASA5505-SW-UL means unlimited license
View 4 Replies
View Related
Jan 21, 2013
I just joined this company and they already ad a VPN to one of their partners that provides them access to some resources. We have now added a 2nd location but the partner wouldnt allow a 2nd VPN tunnel so the decision was made to give the new location a ASA5505 to tunnel thru the main office to access the resources at the partners site.Using ASDM i believe i was able to setup the tunnel to the main office but there is no resource there to use. Now i'm stuck and i do not know what to do to get to the partner site
View 4 Replies
View Related
Jan 9, 2011
My home network consists of a Linksys WRT54GL router running DD-WRT supplying wired access to my desktop, a bridge to another WRT54GL (also running DD-WRT) to provide a wired connection to a XBOX upstairs, and wireless access to about 5 or 6 different devices including several laptops, an iPad, and an iPod touch. My question is this:
I am adding a 22" TV into my office so I can watch TV while working on my desktop. I only have one cable jack in my office which is currently plugged straight into my cable modem. This means I'll have to use a splitter to give both my TV and modem cable access. How much signal degradation or speed do I stand to lose or should expect to lose?
View 13 Replies
View Related
Apr 3, 2013
Would the above router be a good choise for a home office setup for use with WAN speeds upto 30Mbps and VOIP? Any other.
View 1 Replies
View Related
Oct 26, 2011
I have a very high speed connection in my dad's office, and it is over 10 mbps. and the connection in my house is worse ( 256 kbps ). So can I use the office connection in home without any problems from the ISP. just like sharing the connection from the office to home.
View 7 Replies
View Related
Oct 12, 2011
I have this strange problem the application Whatsaap connects at my office wifi perfectly but at home it does not connects,I don't know what seems to be the solution.
View 2 Replies
View Related
Jul 18, 2011
looking for opinions on a Wireless Access Point/Bridge/Repeater/Router I might buy and setup for a the home workstation, few wireless devices, and future add-ons.
Product;
EnGenius ECB9500 Wireless Access Point / Bridge / Repeater / Router with Gigabit & 802.3af PoE,
IEEE 802.11b/g/n ,
Up to 300Mbps ,
WEP Encryption 64/128bits
WPA Personal (WPA-PSK using TKIP or AES)[code].....
View 12 Replies
View Related
Jul 7, 2011
I wanna setup a small office network ? how do I setup and can I use a printer on this LAN ??
View 3 Replies
View Related
May 22, 2012
If we remove lan card from office and fix it in home machine so the ip address is same or it will be different?
View 1 Replies
View Related
Feb 22, 2011
I had an SMC router before, and I replaced it with this new D-link DIR-655, The problem I am now having is that I used to visit a web based e-mail /OWA Outlook Web Access, After I VPN to my company, but now with this new D-Link after I VPN, I lost the capability of accessing my OWA to read my e-mail
View 1 Replies
View Related
Sep 2, 2012
I have recently managed to configure a setup where I have 2 srp527's one at office one at home.Have 1 fixed IP at the office and 1 fixed ip at home.I have configured the srp at work to be a vpn server and have configured the group and 2 user profiles. This allows me to have 2 concurrent sessions over the vpn to my office from desktop and laptop at the same time. Connections fire up perfectly no problems.From the desktop, I connect using vpn client with user profile 1 Once connected, I then connect to my workstation machine at the office using remote desktop.This gets me super fast access to office files and large spreadsheets without downloading the whole file over the vpn and is working perfectly.
If I then additionally connect from the laptop using the vpn client with user profile 2 the remote desktop connection drops.Disconnect the laptop connection, remote desktop comes back.Have isolated this to being 2 connections arriving at the srp at the office from the same external ip. If I connect my laptop to my phone as a hotspot rather than using my home LAN, both connections are made and remote desktop has no interruptions. Is there a way I can overcome this through re-configuration of the srp at the office or is this a limitation with the srp?
View 1 Replies
View Related
Feb 10, 2013
How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
View 7 Replies
View Related
Apr 6, 2012
i have a cisco router 887 which i am trying to configure. but however, do i really need to use the SDM utility or i can do it through CLI?i need to replace my current router in my small home office.
View 3 Replies
View Related
Apr 29, 2011
I am not sure what the problem is but my laptop wont connect to the wireless in my office, it connects fine to my wireless network at home..
View 13 Replies
View Related
Jan 26, 2011
do not have fast internet service so we must need to combine two or more different internet providers and get one speed kindly reply do you know any router/modem/switch which can do this for us.
View 2 Replies
View Related
Feb 8, 2013
I have my laptop. I need to use my broadband connection at my home. Also I need to use my laptop with wifi at my office. We do not have any dhcp servr at office. What I am doing now is changing ip configuration at office every day manually.
View 2 Replies
View Related
Jan 26, 2012
I have a group of five computers at one end of my home office and another group of four computers across the same room. All are hardwired on the same internal network. These cannot be consolidate or moved into one corner or closet. There just is not the space and it's just physically not possible.There is one Internet router as provided by the local cable company. I have this connected to a LinkSys WRT54G2 broadband router. A Netgear DS108 8-port hub is connected the LinkSys. All computers either connect to the Netgear hub or to the LinkSys router. As of now, the WiFi from the LinkSys router is only ever used by my cell phone while at home.
This set up is annoying. At first I did not mind, but there are cables on the floor that I have to step over. These CAT5 cables connect one set of computers to the LinkSys or Netgear. I have to watch where visitors are walking or stepping to assure they don't trip.How can I keep these computers on the same network and eliminate just those cables crossing the floor of my home office?Should I use WiFi NICs? Would this overwhelm the WiFi on the LinkSys?
View 10 Replies
View Related
Apr 1, 2013
I have a home office with multiple VLANS/subnets I have many VPNs that connect only a specific subnet to a specific remote offfice. On a 5520, can I create a S2S VPN to different remote offices that have the same IP scheme, but from different home office subnets? For example at my home office let's say I have two independant, distinct VLAN/subnets: 192.168.140.0/24 and 192.168.150.0/24. Can I create an S2S from the 140 subnet to a remote office with a 10.10.10.0 addressing scheme and another S2S from the 150 subnet to a totally different office also with a 10.10.10.0 scheme?
View 1 Replies
View Related
Feb 25, 2013
I want to acccess my office computer from Home PC.I have ZTE DSL Modem + Wireless Router and got new Static IP, so how to configure Static IP From BSNL.
View 3 Replies
View Related
Dec 30, 2011
I have a Windows 7 Laptop that need to be able to join a Home Workgroup as well as an office Workgroup. How!
View 1 Replies
View Related
Mar 31, 2011
Here a have a quest that can't find the perfect solution for a half year now.I have one machine at office and one at home, both Windows XP SP3, ADSL connection with static IP.On the office machine a have an archive of about 250 GB of files.When i am at home sometimes i need to connect to my office machine, search through those files, maybe preview some, and then download some needed files to my home machine, using a download queue feature is possible.The task doesn't seem so complicated, yet, i did not find a perfect simple solution so far.
View 5 Replies
View Related
Nov 10, 2011
I just installed a 10 port Cisco SG300-10MP in my office, 9 of the ports are already in use. Connected to it are
PC
Laptop
Notebook
WIFI AP
B&W laser printer
Color inkjet printer
IP camera
Squeezebox SB3
Cat5e connection to basement HP 1810G-24 switch All of these devices are connected via a single Cat5e cable that was installed when the house was built. I had to re-terminate both ends of it when I moved in because the existing terminations were done very poorly. I have no idea how or where the cable is routed, nor what the quality of this Cat5e cable is. It did pass a test using my cable tester.
This single Cat5e is connected to my main HP switch in the basement equipment rack. Both of these switches have mini-GBIC ports that can utilize SFP transceivers and fiber. I priced out 2 MGBSX1 compatible modules along with a 30M multimode fiber patch 'cable' online at under $150. Although it would require at least a couple hours of work (including digging around in the attic and crawl space and drilling some holes), but running the fiber to the basement is very doable.
My question to my far more experienced forum members is if the performance gains would be worth the effort?My server is in the basement, and despite having an Intel GB NIC in my PC I am seeing read speeds of ~23MBs and writes of ~49MBs to/from my it. My server has teamed GB NICs (802.3ad LACP Layer 2) connected to trunked (LACP) ports on my HP switch.
View 7 Replies
View Related
Mar 4, 2012
I have a cisco asa 5505 firewall, and I have a normal home ADSL broadband router, the router currently connects via wireless to my pc.What I would like to do is basically connect the asa to my pc, then my router to my firewall.what the best thing to do here, run the aa in transparent mode, OR routed mode and do NAT on the firewall to the private ip address range of my router.
OR, would it be possible to get the outside interface of my asa to get DHCP from my broadband router so it will use a 192.168.1.x address on the outside, and then turn NAT off?
View 2 Replies
View Related
Mar 2, 2012
I am having all sorts of trouble connecting a Cisco RVS4000 to a Cisco ASA5505 over IPSec... I have used the "site to site" vpn wizard, I have a fress "factory reset" on my asa 5505...
View 11 Replies
View Related
Feb 5, 2013
New to Cisco but learning some. Needing to know what I should code into CLI on my ASA5505 to make it work with comcast modem which uses DHCP for it's addressing from Comcast proper.
View 2 Replies
View Related
Oct 25, 2012
I have several locations with time clocks (a Kronos application) on a small home network with outgoing traffic wide open.I have a server in my office behind an ASA5505 router/firewall, also with outging traffic wide open. I have tried taking the device off of the remote network and giving the it a public, static ip address so it is actually on the internet, yet the server cannot see the device, but it can ping it. I was advised to put the device on the remote private network and set up a virtual server using port 8080 at the remote location. The server is still unable to see the device. I also set up a virtual server for VNC. When I am on my server on my work network behind the ASA5505, I can start my VNC viewer and attach to the device at the remote site using the IP of the router (apparently the device has a build in VNC server).
I have also tried to NAT my server to a public IP, I have set up incoming and outgoing rules on the firewalls at both ends.this should be a fairly straight forward connection.
View 7 Replies
View Related
Oct 6, 2011
I have an ASA 5505 with Base license and a vpn client. The scenario is like this: LAN -- ASA 5505 -- ISP DSL Router---( Internet ) -- Home DSL Router --- LAN -- VPN CLient, The ISP DSL Router gets a public IP address and the ASA gets a private IP address (ISP DSL router doing NAT) and I cant reach the internet with no problem from the LAN´s ASA side but I cant make the vpn tunnel connection from the LAN´s Home side so I told the provider to bridge the ISP DSL Router, to the ASA so the ASA could get the public IP but in order to do that the provider told me to do MAC clonning on the ASA 5505 which I did putting the ISP DSL Router MAC on the ASA. Now the ASA gets the public IP on the outside vlan by DHCP but when I try to make the VPN tunnel I just cannt. I can reach the public IP by ping on the ASA and I can see the pings coming in using debug but I just cant make the vpn client work.
View 2 Replies
View Related
Feb 25, 2013
I have been asked to install a ASA5505 on a home network. The home network has a home broadband connection which the ISP provider supplies with an IP address. This is only for 6 weeks until the new line comes in. I know this is going to cause problems but we have no choice but to impletment this.
My questions are below.
1, We have a home hub supplied by the ISP which is configured by an IP address which is NOT static. Can we not use the ASA 5505 instead. I know that if our ISP change the IP address we have to change the IP address on the 5505.
2, Will we be able to use the home network broadband to create a secure connection?
View 1 Replies
View Related
