Ethernet Cable To Phone Port On Router

Sep 24, 2012

HAVE AN ETHERNET SOCKET FOR MY INTERNET BUT WOULD LIKE TO BE WIRELESS MY ROUTER ONLY HAS AN IN PORT FOR PHONE ?

View 1 Replies


ADVERTISEMENT

How To Plug In Ethernet And Phone Cord Cable

Jan 6, 2011

This modem has only three ports. How can I plug in an Ethernet cable and a phone cord cable?

View 1 Replies View Related

Wireless Router Not Recognizing Ethernet Cable In The WAN Port?

Jul 10, 2012

I have a D-link WBR-2310 wireless router connected to a ZyXEL P-600 series modem. Everything worked fine untill a couple days ago when I had a power surge; since then the wireless router won't show on the modem that the ethernet cable is plugged in, and I get no wireless or DSL internet. I called the internet service provider, and they told me to reset both the modem and the router, which I did and it worked fine for about an hour; then it didn't recognize the cable again. I thought maybe it was the ethernet cable itself so I bought a new one, and it didn't correct the problem. When I hook any of the cables up directly from the modem to the labtop or the pc the ethernet light comes on and I have internet connection again. Why doesn't my router recognize the cable?

View 1 Replies View Related

Ethernet Port Not Recognizing Ethernet Cable?

Apr 30, 2011

I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.

View 14 Replies View Related

Linksys Cable / DSL :: WAG320N Set First Ethernet Port To WAN And Got Connection

Apr 4, 2011

Got BT Infinity installed today, thought I would ditch the Home-hub 3 and go back to my tried and tested WAG320N. Got it configured, set the first ethernet port to WAN and got a connection.Ran speed test.net and comes out at 26Mbit.using the Home-hub 3.0 I get 37.5MBit.

View 4 Replies View Related

Dell Laptop Latitude 610 Unable To Connect To Internet Via Ethernet Cable Port

Dec 9, 2012

I have a Dell Laptop Latitude 610 and I have not been able to connect to the Internet via the ethernet cable port for some four months now. I've tried downloading software from Dell's web site, I bought (and returned) and USB to Ethernet cable, only to find out that it was a model ahead of what this machine needs.I've asked local repair place (Microcenter) what it might be, but they'll only tell me after I pay $70 just to open it up.Another repair guy said that it is probably the motherboard and it wasn't worth fixing. (Yet if it was, wouldn't the entire computer decide not to work at all?) [code]

View 3 Replies View Related

Ethernet Port Splitting Options For Net-book File Sharing If No Crossover Cable?

Jul 19, 2011

I have a desktop with a "black screen", but the computer is running. I need to get files/documents off that computer. How can I get them without being able to see the monitor? I have a netbook, a portable hard drive, and regular ethernet cables, but not a cross over cable.

View 1 Replies View Related

Routers / Switches :: Difference In Ethernet Cable And Ethernet Networking Cable?

Apr 28, 2013

Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.

View 1 Replies View Related

Linksys Cable / DSL :: WAG160N Blinking With No Ethernet Cable Attached To Router

Feb 24, 2012

I have a  WAG160N  wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset  ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.

What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ? 

View 1 Replies View Related

Linksys Wireless Router :: E3000 Ethernet Port 4 And Internet Port Not Working

Jul 3, 2012

There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.

View 2 Replies View Related

Linksys E2000 Router Didn't Have A Phone Port?

Oct 30, 2011

i bought a Linksys E2000 router. When i went to set it up, i noticed that the old router has a phone line connected to it. When i looked at my E2000, I noticed that it didn't have a phone port in it (Rj11). Not sure what to do. Would it be possible to buy a Rj11 to Rj45 converter and just use that to connect the phone line to my router?

View 1 Replies View Related

Cisco Switching/Routing :: 7900 - Port Configuration With IP Phone And PC On Same Port

Jan 15, 2013

We just installed a hosted VOIP system using Cisco 7900 series IP phones.  We are having a strange issue with a few computers where they pull DHCP information from our VOIP provider's DHCP server on the Internet and not our LAN DHCP server. 
 
The switchports areconfigured as: switchport mode access
 
My rationale behind this is that the phones would use CDP to get their VLAN info from the providers Cisco router and the PCs would just ride on the default VLAN.  But this is not the case.  Computers randomly keep getting DHCP info from the provider's router.  Do I have to use voice vlan x and make the switchports trunks?

View 6 Replies View Related

Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC Won't Detect Ethernet Cable?

Aug 8, 2012

I am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.

View 9 Replies View Related

Can't Run Ethernet Cable From Router To PC

Oct 4, 2012

At the moment I cant run an ethernet cable through my house from my router to my desktop PC (Which is where I use the internet/play games etc) and connect directly that way because my parents dont want cables going through the house etc etc.For the past 2 months or more I used my old laptop to pick up the wireless connection downstairs then I bridged the connection and used my ethernet cable from the laptop into my PC/Xbox or whatever, no problems until today, I wouldnt even have to log into the laptop, i would just turn it on and leave it at the login screen and I would have internet on my desktop/Xbox.Tried to do that today and was getting unidentified network on my desktop, i dont know what the problem is, I can connect directly to my router with the ethernet (I tried it) but not the old way anymore, i'm on the laptop now on the wireless internet.In network connections there LAN network isnt there anymore, its just the 'Unidentified Network' which is the bridged connection.

View 8 Replies View Related

Cat5e Detects Phone But Not Ethernet?

Oct 19, 2011

I have a house with a Leviton Enhanced Infraestructure Platform that distributes cat5e wiring to multiple outlets throughout the house. The problem is: Some cables will not transmit the Ethernet (internet) signal, but when I connect a phone line to it, it works. So the cable integrity is fine, but somehow connecting the internet router to it will not make it work.

View 2 Replies View Related

Router Isn't Recognizing Ethernet Cable?

Dec 24, 2012

So this morning I was planning to reset my router because my internet was feeling a bit laggy. Omce i did, its lights turned on except for the ethernet light.It was working perfectly last night

Ive tried resetting the router a few times with no results

ive ran the Windows troubleshooter with it recognizing that:

The Local Area Connection adapter is disabled: Detected

Enable the wired network adapter: Not run

View 3 Replies View Related

Internet Works On Ethernet Cable But Not On Router

Oct 28, 2011

I've been using the Linksys router e1000 N type for a week now and it hasn't beeen such a great experience. The thing is when i connect the modem to my laptop via ethernet cable internet works but not when i connect the cable to the router even though this worked before. actually a few hours before. so i dont know whats happened to my router since clearly the problem is in there. the modem has lights for PC Cable DATA and POWER. The lights to all of them blink when i have connected the modem directly to laptop but the PC light is non existent when i connect it to router. hence i get no internet access. the routers power is on so i dont know what the prob is ive rebooted it a few times but to no avail.

View 1 Replies View Related

Laptop Won't Detect Ethernet Cable From Router?

Feb 14, 2011

i have a DSL connection which is established using a dial-up (PPPoE) modem. I recently bought a wifi router, and I found that when I plug the cable to one of the LAN ports and the laptop, it seems as if it wasn't connected at all (not detected on either side).I tried to format the system running on XP and I installed windows 7 but the problem persists.The only thing I can think of right now is using a crossover cable, but I somehow doubt that it should work since I tried plugging the router to my netbook (using a normal cable) and it worked like a charm. But maybe the fact that it's a quite old laptop (PB MV51-101) has something to do?

View 8 Replies View Related

Split Ethernet Cable One To Computer Other To Wifi Router

Dec 13, 2011

I have only one computer right now.Had two, and got very weak signal to laptop (since discarded) upstairs from Linksys g 54Mbits downstairs at main desktop computer desktop.I have tried three different kinds of 54Mbits wifi routers, all with no success.I'm going to get my wife a new wifi laptop for Christmas, and she wants to be able to use it all over the house.The 54Mbits will cover the downstairs, but, based on previous efforts, I am thinking of putting my modem in the garage, where the cable enters my house, and using a splitter on the cable coming out of the modem to make two IN cables, using one cable for my comp and a 54Mbits router (for downstairs coverage), and putting a second wifi router on the end of the upstairs cable, to cover the upstairs rooms.My house has cable outlets in every room, so I won't have to do any wiring.

I plan to leave the routers on all the time (at this time) subject to how much of a bandwidth drop they cause. I have a 100 Mbps connection, and I play games, so I'd like to retain as much bandwidth as possible. I assume the two "on" wifi routers will pull zero bandwidth as long as the laptop is off. (??)Or maybe I should just try an "n" wifi router, since they get twice the distance, and forget the cable splitter idea.

View 7 Replies View Related

Constant Disconnects From Internet Using An Ethernet Cable In A Router

Feb 1, 2013

I'm currently running Windows 7, and I have this issue where from time to time I am booted from my internet with the error saying either one of two things, one being; No internet access but it does show I am connected to my router, and the other being; plug in an ethernet cable. My 2 brothers on the other hand are both connected to the same router through cables as well and neither have this issue. Both issues seem to simply fix themselves by just waiting, but the disconnects are killing me.

View 2 Replies View Related

WRT54G V6 Router - Ethernet Cable Speeds Up The Transfers?

Nov 21, 2011

I have a WRT54G v6 router and I am trying to get higher speeds from a wireless network, I have set up a dish and a cantenna and is going really well about 18-22dbi gain which is very noticeable but I have a question, does an ?Ethernet cable speeds up the transfers Like the Upload and download speeds will be faster? like a high speed cat7 or cat6 cable that can transfer data at much higher frequencies? I have cat 5 and get around 13Mbps, will cat 6 get me 16 or 17? or the router can't handle it?.Also another question is how can I make the gain on the dish higher?

View 2 Replies View Related

Ethernet Cable For Connecting Computer To Router Is Not Working

Jun 13, 2011

My Ethernet cable connecting my computer to my router is not working. It was just working a few days ago and I have connected it to a different computer and it worked on that

View 1 Replies View Related

Connect Netgear Router N600 Without Using Ethernet Cable?

Dec 6, 2012

I have internet through my cable company and currently use their wireless netgear router. I purchased a Netgear Router N600 but it does not have a port for the cable connection. Can you recommend the correct wireless router

View 1 Replies View Related

Usb Cable Not Charging Phone?

Apr 15, 2011

bought a new usb cable for samsung champ to connect to hp 620 notebook and installed all necessary things and now it does not charg the phone

View 2 Replies View Related

Ethernet Port Doesn't Recognize Any Ethernet Cord

Dec 26, 2011

I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.

------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo

[code]....

View 7 Replies View Related

Huawei 521i Router - Can Connect With Ethernet Cable But Not Wifi

Oct 15, 2012

I have a huawei 521i router that I recently reset back to factory settings. I have been trying to set up my wifi but something is wrong. I can connect with my ethernet cable but not wifi. I have set up my wireless connection and I can see it in the list.

View 1 Replies View Related

Connecting PC (Windows 7) To Router (Netgear DGN2000) Via Ethernet Cable?

Oct 18, 2012

I am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:

- When connecting via wi-fi everything is fine

- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity

- When enabling my LAN and disabling wi-fi lose all internet connectivity

Here is my IP Config when both are enabled :

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:Windowssystem32>ipconfig

Windows IP Configuration[code].....

View 4 Replies View Related

Linksys Wireless Router :: WRT54G2 Ethernet Cable Not Connected

Feb 17, 2013

I'm using a refurbished WRT54G2 v1.5 router.  I've had the router for two and a half years and have never had a problem. I recently unplugged my DSL modem and this router to move them, and when I plugged them in again, the router stopped picking up the internet signal from the DSL modem. I'm able to get internet when I hardwire directly to the modem though. I tried resetting the router and setting the router up from scratch again, but now I just get error 321 Ethernet cable not connected when I try and run the setup cd.

View 6 Replies View Related

Linksys Wireless Router :: Connecting An Additional PC Via Ethernet Cable?

Oct 22, 2011

The last time I had to reconfigure the connections it took me hours!My son had to wipe his desktop clean and reinstall everything.  Now when he tried to connect to the internet we can't get a connection at all.  My desktop is still working fine as well as the wireless laptops.What do we have to do to get him reconnected?

View 6 Replies View Related

Use Switch As Router Or Any Way To Get More Ethernet Port?

Jan 15, 2011

If I can use my switch as a router or a way to get more Ethernet port? Since my router is down for the count and I need more ports!

View 4 Replies View Related

Linksys Wireless Router :: E4200 Speed Drop Using Ethernet Cable

Oct 4, 2011

I'm pretty new to networking.  Purchased a E4200 for my home line.  When i connect directly through the modem i see speeds of about 600mbps but when i connect through the router via an ethernet cable on an empty port on the back of my e4200 my speeds drop to about 180mbps.  I expected a speed loss going through wireless but why i am experiencing a speed loss by using the ethernet as a passthrough?  I thought the ethernet ports on the e4200 were gigabit and support up to 1000mbps? 

View 1 Replies View Related

Linksys Wireless Router :: WRT120N - Extend Signal Through Ethernet Cable?

Nov 11, 2012

I have a Linksys WRT120N plugged directly into my cable modem upstairs, an 8 port switch plugged into it, an ethernet cable from it run downstairs in my house to another 8 port switch and a Linksys E4200 plugged into it.  I want both routers to allow me to connect to the internet wirelessly if possible.  I cannot even access the E4200 from a browser, because the IP adress 192.168.1.1 goes directly to the WRT120N.

View 4 Replies View Related

Linksys Wireless Router :: E3200 No Ethernet Connection Or Cable Modem

Mar 6, 2013

We have a E3200 wireless router but our only connection is wireless. There is no Ethernet connection or cable modem. Presently I am unable to bring up the web page ie...10.100.x.x for entering the id/pw to login. Router is setup with default settings. Is there a setting that needs to be changed from the setup menu or this type of setup will not work with this router.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved