I have a desktop with a "black screen", but the computer is running. I need to get files/documents off that computer. How can I get them without being able to see the monitor? I have a netbook, a portable hard drive, and regular ethernet cables, but not a cross over cable.
View 1 Repliesmy laptop has a very annoying habit of disconnecting from the internet, on annoying ass random occasions, the network dropped. When my laptop connected back to the internet again, my pc now says that there is no internet access coming from the cable. I have reset both my laptop and my pc, the router and changed cables. I have also enabled NETBios with TCP on both computers, but nothing.
View 5 Replies View Relatedi use a home pc and i want to connect to a laptop that needs cleaning out i have a etherrnet crossover cable and i am using windows 2000 pro
View 1 Replies View RelatedI have a two computer network. Here are the network adapter details of the two computers.
-Realtek RTL8111E Gigabit Ethernet Controller
-Broadcom NetXtreme Gigabit Ethernet
I'm using a CAT5e cable. But it gives only a 10 MB/s file sharing speed. What is the reason for this? (In both the computers under "Local Area Connection Status" it shows 100 Mbps for the speed)
successfully installed Windows 7 x64 on my computer this week, but the computer sometimes loses contact with my WD 1TB Book live NAS(When trying to copy Big FILE). When this happens, I restart the computer, and the drive usually reappears. I just bought this hard drive two days agoInstead of simply failing to recognize it, I sometimes get "not responding" errors when trying to open files.My hard drive (Western Digital My Book Live WDBACG0010HCH 1TBI contacted Western Digital support, Still no reply from them. still waitingi find some hardware forum to check this out .. also not solution yeti change my router,off firewall, also the same problem.
View 1 Replies View RelatedI'm trying to connect a second desktop to my internet connection. My current setup has my primary desktop using a wireless card and getting internet from the wireless router. Then I bridged the connection from my desktop to my xbox. Everything worked perfectly.
However, I recently got a second desktop(running lubuntu if it matters) and I'm trying to get it connected so that I can use Synergy and share a mouse with it. I found an old router laying around the house and was hoping I could use it to share the bridged connection to my xbox with the second desktop. Like this:
I couldn't get that to work though. The second desktop knew it was connected, but it couldn't connect to the internet. It would also throw off my primary desktop and it would try to connect to the old router.
I also tried to set it up like this:
Using an ethernet plug in the wall that normally just went to the TV and trying to split it there. The TV still worked, but the second desktop didn't.
How I can get this all working. I'd like to do it without having to order a wireless card/usb and just use what I have.
getting near my home internet keeps shutting off and i lose the internet for half hour periods of time or more now im sure it will get worst as the storm gets closer. i run my cell phone usb tethered to the pc how do i setup my pc to share that internet from the ethernet cord so i can say run my xbox online plugged into the pc ethernet jack?
View 2 Replies View RelatedI have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.
View 14 Replies View RelatedI have Mediacom cable and internet and I was trying to hook both up in the same room.When I connect it directly from the internet cord to my modem it works fine.But when I connect it using a splitter to hook it up to my modem and tv, only the tv works.So, how would I get this to work??
View 1 Replies View RelatedI recently bought the WAG320N can I block Peer to Peer file sharing on my Network?
View 3 Replies View RelatedI bought my WAG320N, I too have the internet drop out and from reading in here is a very common problem. Cisco really should bring out a new firmware version and address this issue. Any way you can block peer to peer file sharing with the WAG320N? If so how do you go about it?
View 1 Replies View RelatedI want to directly connect two Win XP machines together to transfer large files.Both have "Gigabit Ethernet".Its been years since I last did this, and used to need a special cable called a crossover cable to accomplish this, but reading up to refresh my memory I believe I no longer need the special cable, but can use the cable that now connects my cable modem to my computer, as the Gigabit specification eliminates the need for a crossover cable.
View 3 Replies View RelatedThe business i work for uses a "Do it myself" template for their website. (this is through their webhosting company). I can not add FTP to this website, we have to completely redo it with code and whatnot in order to have access to FTP. We would like users to download a template from our website (no problem) and then send us their artwork files back to us. These can be upwards of 150mb. Is there another option that i am not aware of to do this? Can't use email, has a limit of 25mb.
View 6 Replies View RelatedI'm trying to run a CAT6 cable from my router to my PS3 in the living room downstairs. It has to make several connections along the way. I've done something wrong, because I'm not getting a signal at the last outlet, and now I'm wondering if one of these legs needed to be wired for crossover, not pass-through.
View 3 Replies View RelatedAd hoc network may created between two PCs either with, wifi or a RJ-45 Crossover cable?
View 7 Replies View RelatedI just got done running CAT 6 wire's into different rooms and placing jacks on the wall which all works correcting going into the patch panel. The problem I am having is that the Access Points on the ceiling I decided to make it a little easier and use regular network cable and cut one end off and place it into the patch panel the same way as all the jacks. The AP's are POE and they are just not getting on the network. Do I need to do something different for this cable?The way I punched all the wall jacks and all the cables to the patch panel is by using section B on the jack so because of me cutting a cable and leaving one end on, should I use A or is there something else I should do?
View 3 Replies View RelatedI have been trying to connect my laptop (Windows Vista) and my netbook (Windows 7) with a crossover cable, and I have followed every single step of the instructions I have found on the net, including disabling Windows firewall, but it won't do it and when I try to ping the failure seems to be when the netbook tries to ping the laptop (100% loss).
View 6 Replies View RelatedI'm trying to connect my two computer (XP and Win 7) using a crossover cable. I set the the IP as 192.168.0.1 and 192.168.0.2.The computers can see each each other and I can access the public folder of the win7-machine on my XP-machine. However, if I try accessing the xp-machine it says:
Quote: You don't have permission to access \PC. Contact your network administrator to request access.
Both computers can ping each other without problems.I've tried rebooting the computers, plugging the cable out and back in again, turn Internet (wifi) off but it doesn't work. Also, the File and Printer Sharing is enabled, too. Disabling the firewalls won't work and I deactivated the user/pass login so there is no password needed.
how to connect two computers for playing games?
View 1 Replies View RelatedRegarding to the connection RV110W to any Cisco router, should I use a crossover cable accordingly? Because, I heard that the crossover function is done inside of some switches and routers. So, I would like to know whthether the function is included into RV110W.
View 3 Replies View RelatedI am trying to establish a connection with an already existing IPsec VPN for file sharing. I click on the icon and get error messages when I type the correct username and password. I also entered the shared secret key correctly. I do not know where to enter the "group" name that coincides with the key I was given.
View 5 Replies View RelatedI'm in the middle of restoring a Windows XP computer after a drive failure, and on the new system, the Turn On File and Printer Sharing setting has been forcing a reboot and always resets itself to Off after the restart.
View 1 Replies View RelatedHAVE AN ETHERNET SOCKET FOR MY INTERNET BUT WOULD LIKE TO BE WIRELESS MY ROUTER ONLY HAS AN IN PORT FOR PHONE ?
View 1 Replies View Related[code] Basically, we used to use Outlook for our customer management, but after I tried to design a custom form for customers that suited our needs better than Outlook's default form (i.e. we don't need state, country, region, etc. for each customer, and we'd prefer to have spots for Roof, Shingle, Shingle color, etc. in their place), we ended up turning OneNote into our new Customer Management System.Our problem is sharing files, and the security or lack thereof that goes along with it.We used to save all the files to a single computer, and use Windows 7 Home group to access them. That worked okay, but often we couldn't see the file-holding computer, and would have to disconnect/reconnect to the internet.
We recently bought a NAS HD, which actually works a lot better than I expected. Unfortunately, we've learned recently that new employees are not always the most trustworthy. So this is what we are trying to do:We want to set up some type of way for us to save, store, and access files, which allows us to keep track of who has done what (access, save, copy, delete, print, etc.), preferably one where we can set up alerts if certain things happen (i.e. someone copies and pastes the entire thing, or attempts to delete). We've run into the problem where, yes, we want people to be able to copy and paste certain documents, yes we want people to be able to print, but no we don't want someone to be able to print out our entire customer lists, current project lists, etc.This NAS HD (MyBook Live 2TB by Western Digital) could quite possibly have the most ridiculous set up I've ever encountered. I can set up accounts and passwords, but they are completely irrelevant because from "Computer" you can just select the z:/ drive and it will still take you to our files. We just brought on a couple new people, and its like, everyone tells them to come to me in regards to the computers, and I can't even hook them up to the internet because it would give them access to our network, which in turn gives them access to our z:/ drive, which contains every file our company has.
\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions.
I have a little small network created with 6 computers. 5 of them are windows xp home and pro. jsut bought a new laptop with windows 7 64 bit home pre. All the xp laptops can share files easily but the windows 7 is giving me a really hard time.
The win xp computers can see the windows 7 folders showing up in my network places but when i try and open then it gives me this error "\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions"
I'm trying to connect my two computer (XP and Win 7) using a crossover cable. I set the the IP as 192.168.0.1 and 192.168.0.2.The computers can see each each other and I can access the public folder of the win7-machine on my XP-machine. However, if I try accessing the xp-machine it says:
View 2 Replies View RelatedAfter trying to communicate between an XP machine and Win7 using static IP and a crossover cable my wireless card stopped working. I did make the mistake of trying Homegroups prior to that.
It says Unidentified network and constantly remains in the Public Profile. Not even WiFi Sync is working...diagnostics reveal a problem with the drivers though several have been tried. From the originals to the latest version...Properties describe the device is working normally?
I have a D-link WBR-2310 wireless router connected to a ZyXEL P-600 series modem. Everything worked fine untill a couple days ago when I had a power surge; since then the wireless router won't show on the modem that the ethernet cable is plugged in, and I get no wireless or DSL internet. I called the internet service provider, and they told me to reset both the modem and the router, which I did and it worked fine for about an hour; then it didn't recognize the cable again. I thought maybe it was the ethernet cable itself so I bought a new one, and it didn't correct the problem. When I hook any of the cables up directly from the modem to the labtop or the pc the ethernet light comes on and I have internet connection again. Why doesn't my router recognize the cable?
View 1 Replies View RelatedGot BT Infinity installed today, thought I would ditch the Home-hub 3 and go back to my tried and tested WAG320N. Got it configured, set the first ethernet port to WAN and got a connection.Ran speed test.net and comes out at 26Mbit.using the Home-hub 3.0 I get 37.5MBit.
View 4 Replies View Relatedeasiest way to convert a cat 5e crossover cable to make it a straight? I have 2 PCs networked & am introducing a router & need to covert the cable without having to rewire it if possible.
View 1 Replies View RelatedI tried to bridge two wireless routers wirelessly, but after extensive research I came to the conclusion that this wasn't possible.
Now I am trying to connect these two routers through a cat5 cross-over cable and I wanted to know whether can I disable DHCP on the router which has internet, and enable the DHCP of the router which is connected to the printers, because I have a few systems that shouldn't be connected to the internet.
What I had in mind is if I switch the DHCP OFF on the internet router and turn it ON on the Huawei B683 router, I could add those devices' MAC addresses to the internet gateway router to deny them access to the internet..?
I need setting up File/Folder/Printer sharing in small office LAN and also secure Files (password protect) among users. I have attached two JPG files in which i have tried my best to show the network diagram and how i want to share the files and folders. All the PCs are connected and i have made one Windows 7 Ultimate PC acting as File Server keeping its D Drive in sharing with other five Windows 7 Ultimate PCs acting as clients. I just want to know how to protect Files as per my requirement. There are no fixed PC of any dept users. All the users or Dept Head use any PCs as per availability.
View 1 Replies View RelatedBefore I moved home I had one netgear router supplied by virgin media. On my home network I had my pc sharing it's printer and also some shared folders I.e. Music folder, my documents etc. Now I've moved I have had a new netgear box supplied by virgin media (which I call virgin media 7) which because of the shape of the building doesn't reach my bed room. To fix this I have had to connect my old netgear box (which I call virgin media 8) to the new one via 10m of CAT5e but now I can't access my shared printer or shared folders on my win xp pc which is connected to virgin media 7 via wireless if my vista laptop is connected to virgin media 8. I have tried looking in the setting for the option that makes it just act as an wireless extention to vm7 but they have removed the menu from the settings.
View 5 Replies View Related