I have a two computer network. Here are the network adapter details of the two computers.
-Realtek RTL8111E Gigabit Ethernet Controller
-Broadcom NetXtreme Gigabit Ethernet
I'm using a CAT5e cable. But it gives only a 10 MB/s file sharing speed. What is the reason for this? (In both the computers under "Local Area Connection Status" it shows 100 Mbps for the speed)
I have two ASUS UL80 laptops and trying to copy files from one to another. I also have a Linksys router with WiFI on.
The speed of a file transfer via router + LAN cable (or only the LAN cable) is about 600KB/s. I tried to turn off firewalls on both PC's, but it increases the speed by only 100KB/s.
I have a desktop with a "black screen", but the computer is running. I need to get files/documents off that computer. How can I get them without being able to see the monitor? I have a netbook, a portable hard drive, and regular ethernet cables, but not a cross over cable.
View 1 Replies View RelatedI have an Ethernet Loopback Plug (4 Pairs) made and trying to test the Gigabit Interface on a 3845 Router with a fail result. The interface will show up/up only if I set the interface to 100M/Full Duplex when I plug-in the Ethernet Loopback Plug (4 Pairs). I don't see this Gigabit Interface @ 3845 router has any option to set it to internal or external loopback.
View 2 Replies View RelatedI am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.
View 9 Replies View RelatedI am trying to establish a connection with an already existing IPsec VPN for file sharing. I click on the icon and get error messages when I type the correct username and password. I also entered the shared secret key correctly. I do not know where to enter the "group" name that coincides with the key I was given.
View 5 Replies View RelatedI'm in the middle of restoring a Windows XP computer after a drive failure, and on the new system, the Turn On File and Printer Sharing setting has been forcing a reboot and always resets itself to Off after the restart.
View 1 Replies View Related[code] Basically, we used to use Outlook for our customer management, but after I tried to design a custom form for customers that suited our needs better than Outlook's default form (i.e. we don't need state, country, region, etc. for each customer, and we'd prefer to have spots for Roof, Shingle, Shingle color, etc. in their place), we ended up turning OneNote into our new Customer Management System.Our problem is sharing files, and the security or lack thereof that goes along with it.We used to save all the files to a single computer, and use Windows 7 Home group to access them. That worked okay, but often we couldn't see the file-holding computer, and would have to disconnect/reconnect to the internet.
We recently bought a NAS HD, which actually works a lot better than I expected. Unfortunately, we've learned recently that new employees are not always the most trustworthy. So this is what we are trying to do:We want to set up some type of way for us to save, store, and access files, which allows us to keep track of who has done what (access, save, copy, delete, print, etc.), preferably one where we can set up alerts if certain things happen (i.e. someone copies and pastes the entire thing, or attempts to delete). We've run into the problem where, yes, we want people to be able to copy and paste certain documents, yes we want people to be able to print, but no we don't want someone to be able to print out our entire customer lists, current project lists, etc.This NAS HD (MyBook Live 2TB by Western Digital) could quite possibly have the most ridiculous set up I've ever encountered. I can set up accounts and passwords, but they are completely irrelevant because from "Computer" you can just select the z:/ drive and it will still take you to our files. We just brought on a couple new people, and its like, everyone tells them to come to me in regards to the computers, and I can't even hook them up to the internet because it would give them access to our network, which in turn gives them access to our z:/ drive, which contains every file our company has.
\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions.
I have a little small network created with 6 computers. 5 of them are windows xp home and pro. jsut bought a new laptop with windows 7 64 bit home pre. All the xp laptops can share files easily but the windows 7 is giving me a really hard time.
The win xp computers can see the windows 7 folders showing up in my network places but when i try and open then it gives me this error "\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions"
I need setting up File/Folder/Printer sharing in small office LAN and also secure Files (password protect) among users. I have attached two JPG files in which i have tried my best to show the network diagram and how i want to share the files and folders. All the PCs are connected and i have made one Windows 7 Ultimate PC acting as File Server keeping its D Drive in sharing with other five Windows 7 Ultimate PCs acting as clients. I just want to know how to protect Files as per my requirement. There are no fixed PC of any dept users. All the users or Dept Head use any PCs as per availability.
View 1 Replies View RelatedBefore I moved home I had one netgear router supplied by virgin media. On my home network I had my pc sharing it's printer and also some shared folders I.e. Music folder, my documents etc. Now I've moved I have had a new netgear box supplied by virgin media (which I call virgin media 7) which because of the shape of the building doesn't reach my bed room. To fix this I have had to connect my old netgear box (which I call virgin media 8) to the new one via 10m of CAT5e but now I can't access my shared printer or shared folders on my win xp pc which is connected to virgin media 7 via wireless if my vista laptop is connected to virgin media 8. I have tried looking in the setting for the option that makes it just act as an wireless extention to vm7 but they have removed the menu from the settings.
View 5 Replies View Relatedour workstations provide data (files) to this network by using RDP. RDP allows a user to share the entire contents of one's C drive. I dislike this and many others in my organization also dislike this (from a security threat point of view). I am looking for an alternative and more secure approach.
View 5 Replies View Relatedrecently i was trying to share files between two computers using a networking switch.(windows xp) I tried using network setup wizard on the host computer it only gave me two drive options f drive and the floppy disc drive. so i selected f drive to copy files. I inserted a cd and clicked next but nothing happened. i tried clicking format button and it asked me to 'insert a cd to f drive' so I avoided the format button.My computer has a backup system which someone installed and im not too sure about it so I was wondering if f drive was referring to the backup system (sort of looks like an external hard drive with lights on it connected to modem) or maybe referring to usb port. I did not try using my usb yet. The second pc I noticed did not have network setup wizard on control panel and was not sure if i needed it. I heard that a router has a firewall and is more safer than using a networking switch. at this stage i dont need internet connection for the second pc
View 1 Replies View RelatedOk, I have a new win 7 pc and my old win xp pc has all my video and picture files. On both of my xp pc's i can transfer files via my network places. Can I and if so how do I do that from the xp pc to the win 7 pc? I can stream the videos from the xp on the win 7 but not transfer them.
View 17 Replies View RelatedI installed windows server 2008 in another country with active directory - DNS server - file services Roles. with public IP.I can RDC the server - I can ping IP local and WAN - I can ping computer name from Local only not WAN.I can access the shared files locally using \IPaddresssharedmy problem is that I can't access \IPaddressshared from outside the network.[CODE]
View 3 Replies View RelatedI've recently had an issue where when I turn on File and Printer Sharing, and click apply, I go straight back to the advanced setting menu and its switched back to off despite me changing it.I cheked my services menu and I'm not sure what file and printer sharing has a dependancy on, but Workstation, Netlogon, and Computer Browser will not turn on with the error "windows could not start *** service on the local computer. Error 1068: The dependency service or group failed to start"I network printers and servers for a living, so this is an issue when I'm troubleshooting problems.I cant really name everything thats been installed on this laptop, it changes pretty consistently, but no programs should have interfered with my network
View 1 Replies View RelatedSo I finally got all my parts delivered to setup a home file/backup server this week.
It's currently running Ubuntu Server and I'm using Samba to share files on my network.
The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M
This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D).
My home desktop is then also connected to this switch and again also through CAT6a cable.
Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s.
I know this drive is capable is faster speeds.
I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware
According to Cisco's site the WS-X6748-GE-TX is a "10/100/1000" module.URL
View 7 Replies View RelatedI've got a Buffalo LS-WXL5BF connected directly to one of my PC's gigabit ethernet ports. The link in the Win7 network and connections is showing it connected at 1Gbit but the actual transfer speed tops out around 150-200 Mbit or roughly 15-25MB/s (which is well under what the unit is advertised to perform at.)
I'll be swapping out the cable that came with it for a good CAT5E I got from monoprice but other than that I'm not sure what to try.
I have an issue that I'm not quite sure how to deal with. I had a media server die on me, so I built another one. It is built on Asrock A75 pro4 mobo. I am using the built in lan adapter from the mobo Realtek RTL8111E. At first I had a problem when no other PC could download anything from shares from the server. I could browse the files just fine, but when I tried download anything It would not start for a while and sometimes it would show speed of 16kb/s or something like that and would not budge after that. I re installed the driver did system restore and that partially solved the problem. Now all the pc's except one can download files fine. It is thru wireless network (server is connected with cable to router tho). The media server is running win7 ultimate the laptop that can't download the files is running vista. I tried using different wireless adapters with laptop and standing right by the router and it still wouldn't work. My old server ran also win7 and I had no problems transferring anything from it. I have another pc that runs vista and it doesn't have any issues. Internet works fine on that laptop and also it can download files from other pc's on network fine. The router I'm using is linksys e3000, though i don't think it has anything to do with the problem.
Actually the other pc's can't transfer anything either as of right now, so I would have assume the server is the issue
to what extent gigabit lan port affect speed of internet?
View 1 Replies View RelatedI have a desktop and a laptop computer. both equipped with Gigabit Lan port... I connect them with Straight cable by assigning both computers IP address. I havnt use any switch or router between computers.... The problem is that my transfer speed is about= ~10MB/s..... As far i know the transfer speed should be around 70-80MB/s (125MB/s for Gigabit Lan).....
View 5 Replies View RelatedMy laptop will not connect at full speed whilst on a wired connection. All my other laptops connect at full gigabit speed OK using the same cable. My XPS will only connect at 100Mbps.I have the Realtek PCIe GBE Family Controller.
I am using Win 7 64Bit but I have also tried Ubuntu 12 with the same result. Is this a known problem ?I think this may have been like this since new, My most expensive laptop is the slowest on my network.
Is there a PCI Express 2.0 Gigabit ethernet card [NIC] which i can install in this motherboard where usually one installs NVIDIA graphic cards?
View 4 Replies View RelatedI currently have 2 PCs that are directly connected to each other via a 1Gbs Cat6 connection.I don't currently have a 1Gbs router so what I am doing right now is unhooking this connection and reconnecting both machines to my router when I need internet access. I have ordered some USB Wi-Fi adapters so I can have both machines access the internet that way whilst still use FTP between them on the 1Gbs line.If I were to scrap that idea and get a 1Gbs hub, connect both PCs straight into that, and then also connect the hub to my 100mbits router, would the 2 computers be able to communicate with each other at 1Gbs and then talk to the router at 100mbits, or would the whole network run at 100mbits.I don't really want to have to shell out on a 1Gbs router as I don't need anything else on the network to run at that speed.
View 6 Replies View RelatedI am currently connected to my router via a 100 megabit cable (the router port itself is either 100M or 1G, I can't remember). There are no free ports on the router, but I want to connect additional computers to the network. If I get a gigabit switch and connect two of my PCs to it using gigabit cable, can they communicate at gigabit speeds, or will they be limited by the 100M connection back to the router? (In other words, does traffic between two computers on the switch have to be sent through the router, or not?)
View 2 Replies View Relatedmy problem is that i have a computer connected via gigabit lan with a cat5e cable.i have a notebook with a d-link dwa-140 usb wifi adapter connected.and the max transfer speed i get is 14 mbps. d-link dir-655 firmware 1.34eu.in windows it reports 300mbps.in the router it reports 270 mbps sometimes 300. the settings in the router is 40mhz only,. ch 13. wpa2 aes. as described in the sticky.the devices are within 3 ft of each other.
View 2 Replies View RelatedI cant figure it out and can not find a solution. All three computers have gigabit nics, I have gigabit router and switch, my d-link 321 is set to gigabit, the only thing on my network that is not gigabit is my printer. I'm not getting gigabit transfer speed from my computer to dlink 321. I rarely do computer to computer transfers, so I dont know what the speed is of that. The best tranfer rate is from 7-12mb. I am also using cat 5e wires on all connections. What am I missing?
View 12 Replies View RelatedI'm going to be upgrading my network (router and network cards etc). I was wondering if there will be any performance difference with the Belkin Fastcat 5e I currently have and CAT6 cables?
View 7 Replies View RelatedI have a Dell Studio running windows 7 sp1. yesterday i was on the internet as normal. Today i was able to connect via my schools wifi, but not my ethernet cable. Device manager shows that my ethernet port should be available.
View 3 Replies View RelatedSo my old router needed replacement and my dad bought a Netgear gigabit ethernet switch instead of a router. It said that it gets 1Gbps when I look inside the local area connection speed. The problem was we tried to use it like a router but only 2 computers could connect to the internet at one time but it was indeed noticeably faster when it came to video streaming speed. We since returned it and bought a Netgear N600 router that says the speed is 300mbps but like my old router it shows the speed is actually 100mbps and the streaming is good for the most part but every now and then slows down. Would using the ethernet switch with our new router work with streaming speeds and connection stability and of course let more computers connect and also use the routers wireless.
View 13 Replies View RelatedI have the following problem. I bought two TP-LINK TG-3269 gigabit cards, placed them in two computers and connected them directly. On my Ubuntu system I used iperf tool and measured only 95 Mbit/s. It wont go any faster, I tried many times with different settings.
The indicator lamp shows 1000 Mbit/s.
i have a cisco 1921 router and it has ge0/0 (LAN) and ge(0/1) WAN. ge 0/0 is well connected and i can ping it and the LED light is on but ge 0/1 has failed to come up.Ge0/1 is connected to an IDU and has a public IP address. The LED light also does not light on ge 0/1.Where could the problem be?
View 5 Replies View Related