Printer To Pc Via Ethernet Cable Only?

Dec 21, 2012

With just a printer and an ethernet cable, can this be used to print without internet, modem, etc. just like using an USB to printer?

View 3 Replies


ADVERTISEMENT

How To Connect Ethernet Cable For HP Printer

Apr 1, 2012

I am trying to connect an hp printer via ethernet cable through our router and I am not able to print from my laptop

View 1 Replies View Related

Printer To Switch Via Ethernet Cable?

Mar 27, 2012

Via ethernet which cable is use between printer to switch

View 1 Replies View Related

Connect Canon MX700 Printer Via Ethernet Cable To Linksys Router - WRT54G2

Jan 8, 2013

I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.

View 5 Replies View Related

WRT54G2 - Connect Canon MX700 Printer Via Ethernet Cable To Linksys Router

Jan 8, 2013

I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.

View 1 Replies View Related

Routers / Switches :: Difference In Ethernet Cable And Ethernet Networking Cable?

Apr 28, 2013

Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.

View 1 Replies View Related

Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC Won't Detect Ethernet Cable?

Aug 8, 2012

I am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.

View 9 Replies View Related

Linksys Cable / DSL :: WAG160N Blinking With No Ethernet Cable Attached To Router

Feb 24, 2012

I have a  WAG160N  wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset  ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.

What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ? 

View 1 Replies View Related

Ethernet Port Not Recognizing Ethernet Cable?

Apr 30, 2011

I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.

View 14 Replies View Related

Dell AIO 968w - Printer Won't Connect Via Ethernet Or USB

Oct 1, 2011

I have a Dell AIO 968w. I've tried connecting it via the USB that came with the printer and a new one incase the old one broke as everytime I connected it it gave the message. USB malfunctioned please replace device. Later I connected it via Ethernet to my Linksys switch, but my computer wouldn't recognize the printer nor the IP connected. I've tried manually imputing the IP, but no luck.

View 6 Replies View Related

Use Ethernet Adapter To Attach USB Printer To Network?

May 9, 2011

Is it possible to use a USB to Ethernet adapter to attach a USB printer to the network?

View 3 Replies View Related

Home Network :: Can't Print To Wireless Printer From Ethernet Connected PC

Mar 1, 2011

I am currently having a problem connecting a hardlined (ethernet connected) PC to a wireless printer. I want to know first of all if this is even possible. If so, how can I make this work? I know just enough about networking to be dangerous, but not enough to see what I am doing wrong. My network structure is as follows:
a 2Wire wireless modem/router provided by my ISP. a win xp laptop connected wirelessly a vista laptop connected wirelessly a win xp pc connected via the 2Wire ethernet port a Lexmark 4530 printer with wireless adapter connected wirelessly wireless config is WPA-personal (TKIP)

The laptops are able to print to the printer, but that is only because I used the CD for the printer to setup the wireless printing. When I look at the network neighborhood on both laptops, the printer does not appear. This leads me to believe that the printer is not connected to the network, the laptops have just created a printer connection (the port designation leads me to believe this as it just shows Lexmark 3500_4500 and not an actual address). The hardlined PC can connect to the internet, but is not visible to either of the PC's. When I try to type in the IP address listed on the printers config page, it doesn't see it. I can ping it, but can't connect. I think my problem is in the connection of the wireless printer. I can see it in the connection screen of the 2Wire status page, but I have a funny feeling it isn't configured properly. There appears to be no way to configure the printer outside of using their "wireless connection utility wizard" on the CD.

There is one other twist to this, I have a Dlink DGL4300 wireless gaming router that I use for my XBOX and to give me additional hardline ports for other things. I don't have it connected right now (my box is out of commission waiting on parts), but I did have it connected behind the 2Wire before without any problems. I would like for it to remain this way once I have the printing problem resolved. I am using DHCP right now with auto assigned IPs, but I can reconfigure the network to whatever will allow me to get this to work properly.

View 3 Replies View Related

Routers / Switches :: Netgear Fs605 Ethernet - Wifi Printer Access In Network?

Apr 5, 2013

I use a Netgear FS605 Ethernet Switch to connect a wifi modem to my network and thus to the internet. People in that room can jump online via the wifi modem. You can also print to the wireless printer in that room via that wifi modem being local. However, I can no longer print to the wifi printer from anywhere else in my network (I could before I got a new router and wifi modem in there).Would this be a problem with this Switch or with the modem e.g.

View 1 Replies View Related

Connect Canon IP6600D Printer (USB 2.0 Interface) To An Ethernet Port On Wireless Router?

Jan 28, 2011

Can I connect my Canon iP6600D printer (USB 2.0 interface) to an Ethernet port on my wireless router so as to end up with a network printer?

View 1 Replies View Related

Network Printer And Computer Share Same Cat 5 Cable?

May 3, 2011

I have a network printer that I would like to use in a room away from the router. Can I use an RJ45 splitter so these two devices can share the same cable? It doesn't have wireless capability.

View 11 Replies View Related

Pixma Mx 439 / Wireless Printer Will Only Print If Use The Usb Cable

Dec 3, 2012

my wireless printer will only print if I use the usb cable. It does not recognize the ssid# when signing into network.

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Won't Airprint To HP Printer

Jan 24, 2011

My WAG120N does not allow airprint from ipad/ipod to HP photosmart wireless printer.  When i replace the linksys router with an old netgear one all works well and the ipad can find the printer and print.  Enable the Linksys router and the printer is no longer found on the ipad.  other forums suggest this relates to handling of the Bonjour protocol ... any resolution for this so i dont have to go back to legacy speed on my home wifi?

View 3 Replies View Related

Linksys Cable / DSL :: WAG320N USB Printer And Transmission Power?

Feb 12, 2011

1. Does Linksys WAG320N support USB printer? Can I connect a printer to USB-port and send some text to print from notebook via wi-fi?

2. The fact is that I have a cheap, simple chinese WiFi-ADSL-modem ZTE, which has 3 modes - low / medium / high for WI-FI signal. So, the signal is transmitted by ZTE at LOW-level is equivalent to signal, which now sends my WAG320N. When I  turn ZTE on high-level, then the range of wi-fi signal increases much, comparing with the range given by WAG320N. So, where can I turn on high-mode in my WAG320N?

View 1 Replies View Related

HP Officejet 4500 - Does Wireless Printer Tether To Dsl Router With Cable?

Sep 11, 2011

i just bought an HP Officejet 4500 wireless all-in-one printer. i imagined this would mean that my laptop can print to the printer without a USB cable, but also that the printer itself would not have to "cable" to anything, but rather be wireless and located anywhere in the house. was i wrong? does this printer HAVE to connect physically with the router box?

View 1 Replies View Related

Setup Cable Modem / Router With Printer Attached To One Of LAN Ports?

Jan 25, 2012

Im trying to setup a cable modem which is also a router that has a printer attached to one of its lan ports. From there it connects to another router which connects to other clients from there i have another router with a VPN connection with other clients. I would like to be able to see everyone on the network. How do I setup the routers in particular the router with the vpn which is the last router. Also the vpn router is connected through its WAN port to the router ahead of it at its lan port so it can use its VPN connection.If it makes it easier lets ignore the cable modem as router and ill find the printer another way of connecting but essentially i need the two other routers for two ip addresses. One for the first router with my regular IP and then the other is for VPN IP.

View 3 Replies View Related

Linksys Cable / DSL :: WAG120N - IPAD Not Accepting Kodak Printer

Aug 7, 2011

Trying to print from an IPAD to a KODAK ESP9 printer via the WAG 120N?

View 1 Replies View Related

Video From Mac To Pc Via Ethernet Cable?

Jul 21, 2011

I'm trying to set up a system where a lecturer can sit at home and give his (video and audio) class across the street via an ethernet cable strung across the street. The only problem is he has a mac, and we in the class running it aren't going to leave our PCs for macs!Is there any simple way to connect the mac to PC (without running through a router, as it slows down the system)?If so, what programs will work best for both PC and mac for streaming the video (and are free)[BTW I don't think a 100m cable is too long for the signal.

View 2 Replies View Related

Ethernet Cable Too Run Around My House?

Dec 15, 2012

What is the best Ethernet cable too run around my house?

View 3 Replies View Related

Ethernet Cable Isn't Being Read?

Mar 19, 2013

I'm switching from using a wireless usb adapter to a wired connection via ethernet cable.

When I plug the ethernet cable in however nothing happens, I've tried using it with a different computer and it works like a charm but this one doesn't seem to be working right.

HP Pro Small Form Factor 3010 Windows 7 32bit (Other computer was using windows vista)

Windows IP Configuration
Host Name . . . . . . . . . . . . : HPPro3010
Primary Dns Suffix . . . . . . . :

[Code]....

View 1 Replies View Related

The Ethernet Cable Isn't Recognized?

Sep 20, 2012

Yesterday I was on my computer when all of the sudden my internet stopped working. I am using windows 7 and at the bottom right I see a big "X" over the small computer icon. I already tried a computer reboot, a router+modem reboot, system restore, and I even reset the power to the room of the modem+router from the fuse box in my house. I tried everything.

I'm sure the problem must be from the actual cable or mother board itself. ( I hope it isn't ) I tried blowing out any dust from the ports and making sure that nothing was blocking the connection. I fell asleep last night with the internet not working, and woke up to it working. Every other computer in my house works except for mine. I tried all of the router ports as well. I did not attempt another ethernet cable though because my room is far and I would need to make a very long one.

View 14 Replies View Related

Can't Connect With Ethernet Cable

Jul 11, 2012

I just reinstalled Windows 7 on my computer again and appear to be having trouble connecting to the internet with my ethernet cable. I've only ever used a wired connection on this computer, but am completely unable to do so at the moment.

View 11 Replies View Related

Can Use Internet Without An Ethernet Cable

Aug 5, 2012

The Ethernet cable really gets in my way and I'm trying to find a way to use my Internet without it... What would I have to change on my computer?

View 1 Replies View Related

Ethernet Cable Not Being Recognized

Apr 25, 2013

An older post on this forum told me to remove the adapter's driver software and restart the system. I did this, and it tried to install the software on startup but it keeps failing when installing. Forcing it to look for new driver software resulted in it saying the best software is already installed.

View 4 Replies View Related

No Connection On Ethernet Cable

Aug 10, 2012

I have vista system, belkin wireless realtec ethernet cable and alice modem internet provider is o2 everything is working as i have checked but I GET NO CONNECTION everything was fine for 2 years and then suddenly after checking the system I am told that the ethernet cable is not connected,

View 5 Replies View Related

Ethernet Cable Is Not Reading?

Dec 18, 2012

My Ethernet Cable is not reading, when ever i plug in the Ethernet cable into the port into my Toshiba laptop, it doesn't read, What is the problem, My cable, Laptop or (ISP) Internet service Provider?

View 1 Replies View Related

Connect Two PCs With Ethernet Cable?

Dec 31, 2012

I am trying to connect my two laptops with one Ethernet cable without any internet to a Network. However, just one of the laptops is identifying the connection, the other doesn't recognize that it has been connected to another laptop. Obviously, the cable itself is working (because one laptop identifies the connection), but what might be the problem that the other laptop doesn't recognize any connections?

View 6 Replies View Related

Difference Between LAN And Ethernet Cable

Jul 4, 2012

I would like to know what is the difference between LAN cable and ethernet cable? Is both cable is same? can we use CAT 6 and CAT 5 cable as LAN CABLE?

View 4 Replies View Related

Can't Connect Through Ethernet Cable

Sep 13, 2011

I'm trying to connect to the internet via the ethernet cable available in my office at the university but it won't work. I'm able to see other computers connected to the network, share printers and have access to shared files but have no internet access. I know that the problem is not the cable or socket because my old XP computer connects to the internet just fine.

I had a similar problem back at home but I just restarted the modem and was able to connect.

Setup:
Lenovo x220 tablet
Network card: Intel 82579LM Gigabit Network Connection

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved