Linksys Wireless Router :: E1200 Speed Is Very Slow
Oct 21, 2011
I just purchased an e1200 wireless router. Wireless speeds seem to be very slow. I'm trying to transfer 1 file to my media server, and am only getting 221kb/s. Also, internet connection seems to be slow as well (though if I plug directly into the router or the modem, I get speeds of 25Mbps, however when connecting wirelessly via the router I get speeds closer to 2Mbps (according to speedtest.com).I've played around with the settings as per other posts, and seemed to get the best speeds with the following config (however it is still very poor):
- security mode: WPA2 Personal
- network mode: B/G (have also tried N, which gave worse speeds)
- channels 1,3,6,9, and 11
View 2 Replies
ADVERTISEMENT
Jun 30, 2012
Both the router and modem are new. Connecting directly to the modem I get Mbps, but the router speed is Kbps. I upgraded the firmware and made various changes per Google searches
View 2 Replies
View Related
Mar 5, 2012
I bought a brand new Linksys E1200 v2 and I encountered a big problem.
Without the router I am able to reach over 90 Mbps doawnloading torrents on wired connection, but through the router I can't obtain more than 55 Mbps.
Is the problem in settings or that's just the maximum speed that the router can handle for wan2lan ? Do I need an upgrade?
View 2 Replies
View Related
Dec 18, 2012
I just bought a Cisco e1200 router... and the wireless connection is way too slow, when navigating through the web, but when using speed test, the connection seems fine, but still it even takes more than usual to open simple pages, lets say Google... i usually watch streams and now that i cannot do... when i connect directly i can do everything as usual...as i have read, i change channels, but still no improvement, i have the latest firmware, on my range there are only 2 more available connections... i even tried disabling/enabling the WMM... We all know that having extremely slow internet must be the real "Mayan apocalypse"
View 2 Replies
View Related
Dec 6, 2012
I'm having an issue with my new E1200 routeur : I have a 100mbit/s connection and since i installed the E1200 , the speed is cut in half : Max 50 mbit/s .. ( or if this is an hardware limitation ? )
I have a gigabit network card with my pc , everything is fine on the pc / network side as i had these speed fine ( 100mbit/s ) with my old ISP router , ( wich i switched in bridge mode to use the E1200)
View 3 Replies
View Related
Feb 17, 2012
I just bought this router and set it up using its CD. It looked like everything was fine until I connected my laptop using wireless. The wireless download speed is absolutely ridiculous. My wired desktop shows 35mbps while my laptop is 0.5mbps. Upload is same for both. Clearly something is limiting my download wireless.
Contacted Cisco support and they told me to change the mtu to 1400, change channel to 11 and reboot. Nothing worked. I have the latest software.
View 6 Replies
View Related
Jun 22, 2011
My newly installed E1200 only sends speeds of about 16 mbps wireless, but sends the ful 60 mpbs when wired. What is going on. Firmware is up to date. Changing the channels didn't do anything. Is there a way to figure out if the problem is with my laptops wireless card.
View 9 Replies
View Related
Nov 6, 2011
I have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?
View 1 Replies
View Related
Mar 25, 2012
I just got a Macbook Air and couldn't get connected at home so I went and bought a new router (our other router was old!!). We purchased the E1200. Our Dell desktop seems to have a fine connection, but my MacBook Air and my husbands laptop are really slow when on the internet.
View 1 Replies
View Related
May 1, 2012
I bought a E1200 and have it hooked up to my Comcast internet.. When I have my computer hooked up directly to the modem I get a 30mbps download speed. When I connect it to my router the download speed crashes to about .5-.75mbps.. My upload stays pretty stable at around 6-7mbps.
View 5 Replies
View Related
Apr 29, 2013
When I connect my modem directly to my computer I'm getting 27 MBPS speed. When I hook it up through my router, speed slows to 15 mbps.
View 2 Replies
View Related
May 22, 2012
why I am having a slow connection? Before purchasing Linksys E1200 wireless router, my internet speed was perfectly normal with Netgear wireless router. Everything ran smoothly but once I installed Linksys, it began to have slow connection. It also has drop connection sometimes. How do I fix my connection speed and the drop connection?
View 5 Replies
View Related
Feb 15, 2013
I have an E1200 acting soley as an AP. Everything works just fine, but when I try to copy files from one wired computer(both Windows 7) to another one on the same router(the E1200 in this case), the network utilization is only about 4%. If I take one of the computers off its wired connection and make it wireless, the utilization goes up to about 50%. Also if I take one of the compuyters off this router, and make a wired connection to my main router(which is connected via a wired connection to the E1200), the network utilization goes up to 50%.
View 3 Replies
View Related
Apr 29, 2012
I have an E1200 that will work fine for a while, then suddenly the download speed for all wireless devices will drop to between 20-30 KB/sec. It happened last night when we were watching videos on Hulu. We were blazing along fine, when all of a sudden the connection was horrible enough that we had to stop watching. We have no idea what changed - there are only two of us in the house and we were both passively watching Hulu.
This has happened before, and usually changing something like the wireless channel has fixed it, but not this time. The PCs we have that are connected to the router via Ethernet get between 1-3 MB/sec, so I know it's not the modem or the ISP.The signal strength is good (4-5 bars). I have tried repositioning the router and the wireless reciever but that hasn't worked.I have the latest firmware for the router as far as I know (v2.0.02).
I have tried every channel available (including "Auto"). I have tried switching the Channel Width between Auto and 40 MHz. I have tried resetting the router to factory settings and re-uploading my configuraiton. I have tried setting QoS.
View 9 Replies
View Related
Jun 20, 2012
I just installed a new e1200 router last night and my ethernet connection is really slow. I've been reading where people's wireless is really slow, but mine is the opposite. I'm getting around .5 mbps download wired, but around 25 mbps download when its connected wirelessly. Is there anything i can do make the ethernet faster or is the router faulty?
View 8 Replies
View Related
Nov 13, 2012
I upgraded my old router to a Linksys E1200 about 2 months ago. Like others with Comcast, I now have a lot slower internet speeds. I've updated everything, disabled WMM. I'm still getting slow speeds. My download speed is 3.12, which is not that bad for me. However, my upload is just below 1.
View 7 Replies
View Related
Aug 22, 2012
I have been having a problem with my router for the past two weeks and my ISP (RCN) has done nothing to fix it so maybe with our nerd power combined we can find a solution!My router runs fine about 60% of the time, I get 20-24Mbps down and 2Mbps up connect wirelessly. the other 40% of the time the download speed suddenly drops to 1.5-2Mbps down and 1Mbps up. There is nothing in particular that I will be doing at the moment it just suddenly dies.Things I have done that have not worked.I have changed my channel to 1,6,and 11.Updated firmware.Factory Reset (New broadcast name/password).Set up static IPs.I have tried disabling WMM Support and this just kills any connection wirelessly to the router.Is there anything else you can think of to fix the issue, or should I just be demanding a new router the next time they come
View 1 Replies
View Related
Mar 25, 2013
I have the E1200 and since I installed this router, the wireless download speed on my iPad and iPhone has been only around 4 to 5 Mbps when my other wireless devices could get to 7 Mbps and ethernet gives close to 10 (my ISP gives 10 Mbps max).I know many people experience slow download and normally disabling the WMM would solve the issue. But this doesn't work for me and I've made sure i'm on the latest firmware.
View 5 Replies
View Related
Aug 14, 2012
The wireless router, which is a linksys E1200 is completely new. I setup the entire wireless and there was no problems on that front.The problem is the wireless connection. Even when I am within a few inches of the router, I couldn't even load a youtube video properly. It buffers every 2 seconds. But when I plug the cable into my computer, it works completely fine. The signal strength is excellent all the time.
I tried using inSSIDer to look for the number of connections within my area for the one with the least inteference and found that I'm already on the good one, or actually, all of them looked more or less the same. But I tried changing anyways from 1 to 6 to 11, and none of them made a difference.I then tried changing my Wireless Security to WPA2 Personal. Then I tried changing the Wireless Network Mode to Wireless-G Only instead of Mixed and the wireless speed increased.
View 5 Replies
View Related
Apr 15, 2012
I recently purchased an E1200 to replace a broken router. I have had good experiences with this model in the past which is why I bought it. However this has not been so pleasant. For some reason the internet connection over wifi is INCREDIBLY slow. I don't know why. It is fast when connected via ethernet to the router. I changed the MTU on the router to 1400, I set the wireless width to 20MHz and the channel to 11. I set security to WPA2. And yet it is still very very slow. It's not a matter of how many users are on the network; I live in a house with five other people and it's slow regardless of whether everybody's home or nobody is home. It's like this on Macs, PCs, phones and even the Xbox 360. I just did a speed test. Wired was about 14MBps down, wireless was around .7MBps down. I simply cannot comprehend this discrepancy. The old router was very unreliable in terms of connectivity but at least it was always fast. And my laptop is fast at my mom's house where she has an E1200. I use a MacBook Pro from 2009 but like I said,this seems to be affecting everybody in the house regardless of hardware.The modem is a Ubee modem from Comcast. I'd upgrade it to a SURFBoard but my landlord controls all the utilities and I'd rather not have to explain to him how to call Comcast and tell them to register the modem's serial number to the account or whatever.
View 2 Replies
View Related
May 9, 2013
I recently set up a new E1200 router to replace my old one. We are having problems with very slow download speeds (often <0.10 Mbps) even while the upload speeds are OK (8-10 Mbps). Our previous download speed over wifi was 10-15 Mbps.When I first set it up, the download speed was very poor on the initial computer. After fooling around, it was fine. I don't know what I did that made it speed up. However, my wife's computer has had very poor download speeds. After rebooting my computer, the download speed has also dropped bak to <0.10. I was able to stream Hulu on my Wii just fine an hour ago.
View 1 Replies
View Related
Feb 28, 2013
i recently switched from a wrt54g to a Cisco e1200 and my average torrent download and upload speeds went to 1200/kbps 100/kbps to around 200/kbs 0-1/kbps i got the latest firmware tried different channels disabled the wmm I've also tried wireless n only and wireless g only. I have no way to test the wired speed. I have a n adapter.what do i do.
View 9 Replies
View Related
Jan 25, 2013
I have a year old E1200 router. I just updated the firmware today, made adjustments to the MTU range to suit cable service and selected a different channel (9) as the neighbors were mostly on channels 2 and 6.My question is really in regard to the speed results of the router. In the immediate room where the router is located I am getting 17.6 Mbs download speed/ 3.53 upload speeds but if I move to my living room - less than 20 feet away and a few walls - the upload speed drops sharply to 3.21 Mbs download/3.21Mbs uploas.I have read where the router placement can be key. My router is sitting on the desktop. If I elevate the router will it improve performance 20 feet away or should I invest in upgraded router like a E3200 or look into a plug in type repeater?
View 2 Replies
View Related
Jul 24, 2012
I just set up my new e1200 wireless router. The wireless connection works great but on my desktop (which is plugged in through the ethernet), has a painfully slow connection. Half the time it times out while loading a website!
View 3 Replies
View Related
Dec 25, 2012
I currently have a Linksys E1200 router and I am getting anywhere from .3-.5 of a megabit per second download speed while upload speed ranges from 2-5 Mbps. This is very strange to me as I have never seen a connection this slow or one that had a higher upload speed than download speed.
View 7 Replies
View Related
Jul 5, 2013
I was wondering if theres a program or something that I could use for my router to limit the bandwidth that it gives on wifi? I currently have about a 20down/2up connection from time warner with a linksys E1200 router.
I just want to limit the wifi speeds to about 70% because recently someone moved in that does a lot of downloads and makes my games go from 40 ping to 300+ and also my phone is through the internet, which becomes unusable.
just some simple setting to set the max wifi data to 13megabits/s down 1mbit up or something.
View 10 Replies
View Related
Dec 3, 2012
I installed an E1200 router today. It automatically upgraded the firmware to the latest when I did this. Everything went smoothly.
I connected my desktop wired and my laptop wireless. I ran three different speed tests: Xfinity, speedtest, and cnet. All three showed 25-35 Mbps download and 4-5 Mbps upload. That is what my old router had too. So far, so good.
I ran the speed test that came with the E1200 router. It showed 0.30- 0.66 Mbps download and 0.58 - 2.09 Mbps upload. Note the decimal points!
Bottom line: The E1200 seems to be working fine, except that its internal speed test seems to be broken, at least when testing from a wired machine.
View 2 Replies
View Related
Feb 25, 2011
I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.
1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?
2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?
View 2 Replies
View Related
Apr 10, 2013
I bought the new E2500 Router about 5 months ago and it was great until one day the wilreless part would not give me any speed at all. I ran a wired test of the router and I would get full 30Mbps speed that I'm supposed to get. So after firmware updates and everything else I took it back and got another one.It has worked great for a month and today it's now doing the same wilress slow down issue. I can run a lan connected test and get full speed. But wireless is bouncing around at 5Mbps~13Mbps. No where near the 30Mbps I'm supposed to be getting. What is causing the wireless to bomb like this?
View 1 Replies
View Related
Dec 6, 2011
I have a problem with new E4200 WAN speed. I have 1Gb connection from my ISP, and my old Netgear router gives me about 350 Mbps WAN speed, but with new E4200 I only got 110 Mbps max download speed.Cisco live support tried suggested to change MTU from Auto to 1400 (and try different wlan channels, even that I don't use wlan). This MTU size change makes no difference with WAN speed. I have latest firmaware installed, router reseted several times, tried different cables etc. Also with same cable sets my old Netgear still gives about 3 times better WAN speed.WAN port (and all LAN ports) seems to negotiated at 1000 Mbps at both ONT (optical network terminal) and Linksys settings page, but unfortanately there is no way to change the setting from auto to manual at E4200 settings (and it is not possible to change any settings of ONT by user). I was thinking that if somehow it won't auto negotiate properly (even if the setting page says its ok) but maybe it actually negotiated 100 Mbps port to WAN.
View 9 Replies
View Related
Jan 2, 2013
I am using WRT54G linksys router. When connwcted through the router my download speed is very slow(~700K). If i plug in the LAN calble directly to my laptop the speed is ~4M
View 2 Replies
View Related
Jan 25, 2013
I bought a EA 3500 router and my speed is going only half the speed it was without the router.I have charter 100 meg internet, and a alienware Pc with a gigabit card.I wa going 100 megs and now I am at 38-50.I have tried hard reset with the bottom button, I have turned off all firewalls, I have changed my MTU to 1400 and 1500, I have went to speedguide.net and ran a optimizer., I have tried just about everything I can think of. firmware is up to date.
Is there anything I am missing, or am I not going to get these speeds with this router, I was told when I bought it, it was what I needed, Was I duped?, or is there just some setting i need to fix i am not aware of?
View 1 Replies
View Related
Nov 6, 2011
The smile was big when I bought my new Linksys E2000 Wireless Router.
Unfortunately the smiled stiffened when I realised that the network speed did not meet the expected up to 300 Mbps for Wireless and x10 for a Giganet connection. What to do to improve the LAN speed to an acceptable level ?
Network:
* Linksys E2000 ; WPA2 (Personal)
* x2 Windows7 Laptop ; x1 Linux Laptop ; x1 Qnap TS-409 Pro
* Download speed WiFi (between laptops as well as from NAS) <2MB/Sec
* Download Speed Cable (between laptops as well as from NAS) <8MB/Sec
* Download speed with direct connection to NAS (without switch) ~13 MB/sec
View 9 Replies
View Related
