Belkin N600 DB Modem / Router (F9J1102) Dropping Connection
Feb 6, 2012
I'm trying to install a new modem/router (the above) and am having a few problems. The install seems to have gone fine and the firmware has been updated to the latest version. PCs/laptops/PS3s/phones can all connect to the router both wired and wireless. But the modem seems to be dropping its connection to the internet at regular intervals - sometimes every 15mins, other times less. The security log mentions "PPPoE disconnected" after which it reconnects.Has anyone got an idiot proof list of what I should be checking? My old Net gear DG834PN does not have this problem at all so it really has to be the router rather than the line - at least that is my guess.
View 2 Replies
ADVERTISEMENT
Jan 18, 2012
Just purchased a Belkin N600 DB N+ Wireless Router because the wireless on my Actiontec PK5000 really isn't so great. When I hook up the router to my modem and after running the install CD I couldn't get connected to the internet. So I looked at my modem and noticed the light where I had plugged in my router VIA ethernet wasn't lit up like the rest of my ethernet ports even after switching them around.
View 6 Replies
View Related
Nov 27, 2012
My roommate and I have High speed cable internet and the modem is set up in his room. I bought a n600 belkin router and a usb wireless adapter so my computer in my room will get internet. Only problem is there is only one ethernet port on the modem that the internet provider gave us and of course that is taken up by his computer. How do I hook up the router to the modem and get all this to work so I can get on the internet as soon as possible?
View 1 Replies
View Related
Apr 21, 2011
I'm trying to network a small office and have the following devices:
SMCD3G Cable Modem
Belkin Play N600 Router
Digi Mil-H1130 8 Port Ethernet SOHO Hub
Hubbel Cat5 Patch Panel (goes up to 12)
We're replacing our DSL line with a Cable line. Our DSL was a one piece wireless router/modem. When it was installed, it was inside our office, next to the server, and plugged into Wall Jack 1 for all the other computers to connect to. Our server plugged into this modem/router. We didn't have the Belkin Router at the time. The Patch Panel wires went into the Hub behind our office and everything was fine.
The cable modem is now next to the Hub and Patch Panel. I bought the router since we didn't have the wireless feature that the DSL had and everyone I spoke to said I need a router to set up the office. I ran one of the LAN lines from the modem into the Router where it says Modem (WAN). From the Router, I ran the line 1 (LAN) into the Hub. (Does the number matter if nothing is plugged into it in our office?) No computer is able to connect to the internet except my laptop which connects wireless. It works fine.
Another problem. We have a server computer that's Unix based. In order for anyone to connect to the server to access the office software used, the IP address of the router must be 192.9.2.1 or the computer your using won't connect via Multiview 2000 Terminal Emulator. I can't connect to the server because the IP address of the router is still 192.168.2.1. I don't know where I have to go in the router settings to change it. I've tried a few spots and it tells me the IP address is invalid. The settings I had with the DSL modem/router were:
Modem IP address - 192.9.2.1
Subnet Mask - 255.255.255.0
DHCP Start Address - 192.9.2.100
DHCP End Address - 192.9.2.150
It's not like I need to run wires. Everything is set. If something is plugged into a wrong spot, I can switch it.
Additional info:
There are 4 computers in the office and 8 numbered wall jacks.
Server computer - Wall jack 8 (IP address of this machine - 192.9.2.25)
XP Machine 1 - Wall jack 4 (can't connect to server! No internet.)
XP Machine 2 - Wall jack 1 (Is able to connect to the server! No internet.)
Win CE Machine - Wall jack 9 -
I assume. I have a wire that goes through the wall on this machine and it isn't marked. (Rarely used so not sure about server connection)
Wireless Windows7 laptop - connects to the internet fine since it bypasses all these wires. Can't connect to server.
Under the DHCP client list, only 2 computers are listed. The one that has internet is my computer. The other computer listed is wall jack 4 and that has internet now.
my computer - 192.9.2.2
wall jack 4 - 192.9.2.3
The router IP is 192.168.2.1 and the Cable Modem is 10.1.10.11. If I type either number into my web browser it will take me to the router setup page. I don't know where/how to check if it's only one device acting as DHCP. What I want to do is be able to get online with all the computers as well as have access to the software on the server through the office wall jacks. In order to do that I need the router IP address to be 192.9.2.1 and then I'd be able to connect to it.
Right now, one computer is able to connect to the server via hard wire but can't connect to the internet.Another computer is able to connect to the internet via hard wire but can't connect to the server.My laptop can connect wireless to the internet but not the server. In a perferct world, all the computers should be able to connect to both the internet and the server. Right now, it's one or the other with both hard wired machines and I don't know why. Is there a wire not in the hub right? Is a patch panel wire plugged into the wrong port of the hub? I don't know what's supposed to go where. tell me "wire X from the modem goes to Port Z of the router, and Wire Y from the the router goes to number V on the Hub, and that wire goes to number T on the patch panel for the Port number R in the office to work..." I'll try it.
Then I think all I need to do is change the router's IP address to 192.9.2.1 and everyone should be able to connect to the server through the Multiview 2000 Terminal Emulator.When I tried to change the IP address on the router it's telling me it's not valid. Under LAN settings it says 192.168.2.1 - when I try to change it to 192.9.2.1 it tells me LAN IP address is invalid. I clicked on More Info below that in the router page and a pop up gives me info. It says:
The "IP address" is the Internal IP address of the Router. To access the advanced setupinterface, type this IP address into the address bar of your browser. This address can be changed if needed. To Change the IP address, type in the new IP address and click "ApplyChanges". The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:
192.168.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)
10.y.y.x (where y is anything between 0 and 255, and x is anything between 1 and 254.)
172.z.y.x (where z is anything from 16 to 31, and y is anything between 0 and 255, and x is anything between 1 and 254.)
View 4 Replies
View Related
Oct 15, 2012
I have a Compaq with XP wired on a Network with a Belkin N600 Router.There are 5 computers on the Network, (4 wired, one wireless) and this is the only computer that I have problems with connectivity. It connects to the Belkin through 2 switches.Typically when I turn the system on it connects, downloads mail, etc. After a short period of time there is no connectivity to the network for printing nor the internet.I may get connectivity randomly again after a while, but you never know if or when you will get connectivity again for sure. I am using Explorer.I had loaded some Belkin software with no luck so I uninstalled it. The other computers have no special software for the router.
View 1 Replies
View Related
Nov 9, 2012
I am wanting to force the n600 to g.dmt for a more stable connection. cannot work out how to do it. am force into using old modem as far from the dslam and forcing adsl 1 improves performance.
View 4 Replies
View Related
Dec 25, 2011
I recently changed my internet connection from a very slow adsl connection (im a LONG way from the exchange) to a moderatly faster vdsl connection. With the upgrade, they force me to use a modem that looks like it was made 20 years ago (although they say its had all the internals upgraded a month ago) leaving me to use a seperate router for wireless signal. I bought a bellkin F9K1002 v3 and after a little hassle had it up and running, the network connection between all the systems is great, but the router drops the internet connection every 30-120 seconds, for 15-20 seconds each time. I have about 10 devices connecting, but problem is there with just 1 connection wired or wireless.
I've tried calling my ISP (who will not touch router settings) and belkin tech support (who sound like they touched their first computer about 22 seconds ago) with no improvement. I've connected directly to the modem and had perfect connection for 12 hours, ruling it out of the equasion. I've disconnected all systems but one at a time, trying on 3 systems, with no improvement. I've turned off firewall, WPS, tried multiple wireless settings (channels and such) updated firmware all with no improvement. Here's a sample of the system log on the router:
Jan/1/2000 00:27:59 WAN PPPoE client receive
PADS
Jan/1/2000 00:28:00 WAN PPPoE client PAP
[Code].....
View 15 Replies
View Related
Feb 13, 2013
Having an issue with my Belkin N600 router - when initially installed it was working fine but in the past week it has gtten slower - if I connect directly to my DSL modem my speed is 1.5 MBS when I use the router connection my speed drops to .1 MBS - tried resetting to factory defaults & that did not work also tried resetting my modem *& router still having the same issue.
View 9 Replies
View Related
Dec 28, 2012
I have a Belkin N600 model # F9K1102v1 i am loosing connection on all of the components connected to it wired or wireless. They all loose connection at the same time. I also noticed the clock in the router does not set to the correct time it is reading 1970 for the year and never changes.
View 1 Replies
View Related
Mar 12, 2013
I am running winsxp prodessional.I have a belkin N600 DB Wireless N+ Router and it is hooked up to a vmax 480 security syestem . this system allows me to see the cameras remotely on my ipad, i iphone amd laptop .
my problem is this the router shuts down and restarts( it must be programmed to do this ) and i lose the remote connection to the cameras. if i am home i can unplug the vmax and it will restart and find the router etc however when i am traveling i can not do this.
View 1 Replies
View Related
Nov 5, 2012
I just updated my router to a Belkin n600 hd dual band n router. anyway i set it up one band for the "family" on 2.4 gig and my gamer on 5 gig. But the problem is none of my desktops and my latptop doesn't see the 5gig at all the only thing that picks it up is my ipad.
View 5 Replies
View Related
Apr 20, 2013
I have a wi fi capable blu ray player which works on wireless g connections, and I also have 2 computers. I have the N600 Dual Band router, and want to know if it is possible to transmit on both frequencies? I am only seeing the 2.4ghz show up for a connection.
View 1 Replies
View Related
Feb 22, 2013
FSD 7632-4 Router.Have this 2006 router which has started dropping the connection and/or slowing it down intermittently. Before I replace it, would like to update the firmware. Have downloaded the update but cannot log-in on the setup utility page as I cannot remeber my password (apparently it is not set to blank!).
View 1 Replies
View Related
Dec 25, 2011
I'm trying to set up a wireless network for my parents. I have a Belkin Play N600 router (model F7D8302) that I'm trying to hook up to an Acer desktop running Vista. The modem is a Siemens Speed stream 4100. I have a cable going from the ethernet port of the modem to the modem port on the router. The pc is connected to one of the other four ports in the router. The wireless works fine, but I can't get the wired connection on the desktop working. The Internet light on the modem is not on, but the modem works fine when connected directly to the pc. I've tried power cycling and resetting everything, but it's still not working.
View 9 Replies
View Related
Apr 9, 2012
i am using torrent software in my laptop for downloading, this affecting my modem and drops connection.
View 2 Replies
View Related
Apr 12, 2012
I have a DLink D604T wireless modem. It has been working fine for the past 5 years but today the connection to my netbook computer kept dropping out.I can fix it temporarily by going into Network Connections, right clicking the modem, selecting wireless networks, clicking the modem, going to properties and retyping the network password. I then have to set the firewal to advanced connection settings and typing in my family network password, and changing the Windows firewall settings from On to Off.However, the connection drops out again after just a few minutes. If I then turn the firewall back on, it comes back on again for 5 minutes, but then drops out again. Then I have to repeat the whole process.
View 1 Replies
View Related
Aug 30, 2012
I recently purchased the Belkin PLAY N600 router to create a private network for my home theatre setup.I have a primary home network 192.168.0.x (NetGear) which I use for all my computing needs. I extended a network cable to my Home theatre area and plugged in the N600 router. After this, I attached a USB external hard drive to the router and it works great. I can see it from the 192.168.2.x home theatre network (Belkin).I would like to expose the USB hard drive hooked to the Belkin Router to my primary network so that I can copy over my music and pictures without having to physically move the hard driveonto a PC connected to the primary domain.The Belkin router has a DMZ function which exposes an IP on its internal (192.168.2.x)network to the external (192.168.0.103) network.Is it feasible to expose the USB drive to my primary home network?
View 1 Replies
View Related
Dec 31, 2012
Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?
View 1 Replies
View Related
May 1, 2012
I have a PC modem and recently purchase a netgear N600 wireless router. Do they make a splitter of some sort. So I can use both the PC and IPad? If they make a splitter?
View 5 Replies
View Related
Nov 24, 2012
I reset the f5d9321 router and no connection with modem, power cycled the modem and router and still no connection with the modem. Pc and laptop can connect to internet by connecting to modem. The router worked fine 3 days earlier.
View 1 Replies
View Related
Jun 27, 2011
I recently purchased a new Belkin Play Max N600 HD, much different to my old Billion 5100. I'm only on an ADSL connection but will be upgrading to ADSL2 soon.
Anyway I have a Netgear WG602 v3 Wireless Access Point, and I was wondering am I able to put this somewhere else in the house and have it relay the internet connection to my devices (iPhone for example).
I'm in the User Interface of my Belkin Device but I have no clue how to actually set up this Netgear device to act as an AP. I've changed one thing on the Belkin device, not sure if it'll make any difference. I changed the Wireless Band from 2.4Ghz to 5Ghz hoping that it'll strengthen the signal. I've attached a print screen of how the User Interface looks like in case any of the knowing would need some guide to where things are placed. =/
EDIT: Also whenever I'm downloading it's a bit slow. I don't have the fastest internet only 1.5Mbps (150kb/s) but now I'm downloading at about 50kb, and from my computer at about 70kb. =/ These are at separate times.
View 8 Replies
View Related
Apr 22, 2012
I just bought a Belkin N600 USB adapter for my desktop PC. However, after I installed it I only get a "limited connection". I'm a pc novice I've tried everything I can think of. My router is a Verizon Fios Actiontec.
View 1 Replies
View Related
Dec 12, 2012
N600 router will not comunicate with my desktop computer through a cisco switch. The LAN was working fine when I was using a Linksys router. Is this a compatability problem between Belkin and Linksys products?
View 1 Replies
View Related
Mar 4, 2013
Where can I get the setup software for my N600DB USB adapter, I cannot find the CD I got with my wireless adapter.
View 1 Replies
View Related
Feb 13, 2013
I have a N600dp. My printer, Brother MFC-J410W, is plugged into the router USB port. The printer function works but the scanner function doesn't. I keep getting an error message that the printer is not connected.
View 1 Replies
View Related
Mar 27, 2013
Will the N600 Belkin router is DD-WRT compatible, because I saw in a database it is not. Is there also a way to make it DD-WRT compatible, e.g. flashing it ? Do you have a download on the router support side.
View 2 Replies
View Related
Feb 2, 2012
I just installed a band new copy of xp on my system and I cannot connect to the internet! I'm connected via Ethernet to my Belkin n600 HD and whenever I go try to follow the steps via Microsoft [Go into Network Connections > Create a New Connection > Connect to the Internet > Set up my connection manually > Connect using a broadband connection that requires a user name and password] It just brings up the old school dial up vpn style thing and never connects to the net. Secondly I tried to install the Belkin software but it just has errors trying to establish a connection with it. The Internet is working fine, I have 5 laptops connected to it.
View 3 Replies
View Related
May 20, 2011
I have a belkin N600 I believe and I ran the ipconfig/all and got this
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersMichael>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Nero
Primary Dns Suffix . . . . . . . :
[code]....
also every other device I have can connect except one laptop, ipod, printer, xbox360 all connect just fine. and I have tried iprelease and renew.
View 5 Replies
View Related
Sep 1, 2011
I have a Belkin N600 HD.I'm on an Off-net ADSL2 Connection with TPG.It took 2 weeks to connect.I've connected and I'm still downloading at 1.5Mbps (150kb/s)I bought new Lie filters/splitter in case the same ones I have were faulty (C1024M) and connected them correct to both my home phone and my Modem.So I've connected to my net, I can download and do whatever but I'm going at my ADSL1 Speeds. My friend is on the same connection, same modem (he bought it cause of me) and he's hitting higher then me (500kb/s, 600kb/s) Although he's on a separate line so no filters required (I think).He lives about 5minutes away from me (car) and is about the same distance from the exchange as I am (2.5km give or take) [code]
View 1 Replies
View Related
Jul 19, 2011
I just purchased the N600 DB Wireless Router with my ISP (Road Runner) I can connect wireless thru a laptop and a tablet, but when I try to connect wired(LAN) thru desktop (XP Pro SP3) I receive the Limited or No Connectivity. If I bypass the router and plug straight into the cable modem I can connect without issue. I have tried resetting the router, modem and computer to no avail.
Here are the results for ipconfig and ipconfig /renew C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
View 13 Replies
View Related
Feb 9, 2013
One of the laptops in my home connects to the wireless network provided by my brand new Belkin (N600 Dual Band) router with no difficulty at all - the other will not connect at all (it SAYS it is connected to the network, but it says that it is a 'Local Connection Only, and will not open any web browsers or allow you to get on to the internet) why is this happening and, more importantly.
View 1 Replies
View Related
Dec 30, 2012
trying to add a media storage device (3 TB WD My Book Essentials) to my N600 DB router via USB. I have partitioned the HD 2 TB / 1 TB. I have tried several formatting scheme but the router is still not recognizing the HD. Have refreshed, reset, and done a firmware upgrade to the 600.
View 2 Replies
View Related
Jun 10, 2013
I set up an external hard drive to my router. I don't know how to see those files on other devices.
View 2 Replies
View Related
