Setting Vlan Password For Modem / Router?
Apr 26, 2011I have a siemens gigaset567 unit.I suspect others are accessing via vlan.
View 1 Replies
ADVERTISEMENT
Setting Up A Modem / Router Combo (D-Link DSL2730-B) As A Dedicated Modem?
Feb 28, 2013i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
Setting Up A Password For Belkin Router?
Mar 4, 2012I bought a N150 belkin router from a friend without the quick installation guide that was supposed to be incuded. I tried to set it up myself using the CD-Rom but wasn't able to so my roomate did it with the CD-rom she had. She didn't know how to put in a password so I was able to connect my laptop by pressing the WPS button on the router. Now I want to connect another laptop but I need the security key. How do I set one up?
View 2 Replies View RelatedSetting Password For Wifi Router
Oct 15, 2012How to put password on my router wifi
View 3 Replies View RelatedDLink DI524 - Setting Password To Router
Feb 26, 2011I have a d-link DI-524, Im using a modem Xyzel P600 series, my ethernet card is Realtek RTL8101E Family PCI-E.
I already set-up my router and modem. Most of my wireless devices can connect. My problem is it is not secured. When I tried to add WEP or WPA, D-Link restarts but then it cannot connect to my DSL. it says DHCP disconnected and when i try to renew, nothing happened. It just kept on reconnecting. My Desktop has no internet connection.
I connect to my d-link via 192.168.0.1
Setting Up Router In Dorm - No Modem
Jan 24, 2011I am trying to setup a wireless router in my dorm but I cant seem to find any solid guide on how to do it. Simply plugging it in to the ethernet port provided in my room doesnt do it. It seems I have to configure it, but I dont know where to begin.
View 6 Replies View RelatedLinksys - Setting Up Router With DSL Modem
Jan 15, 2013Setting up a linksys router with dsl Modem.laptop direct to modem works router connected dhcp to laptop Eth. port 1 OK router to modem dhcp does not generate DNS but appears to give IP address. Result: can't connect to internet / diagnosis says cannot resolve ( google.com or yahoo.com etc.)
View 2 Replies View RelatedCisco Switching/Routing :: ISA570 Router / G500-52P Switch - Setting Up VLan
Apr 15, 2013I am trying to set up a network that has 1 internet connection, requires a local LAN for the business, and another LAN for public wireless access. Here is what I have and details on what we want to do.
1- Cisco ISA570 Router no WIFI
1- SG500-52P switch
6 - WAP321 Access Points
We have the main LAN set up and all is working well, internet access, 6 WAP's connecting and all is working like a charm. Internal IP range is 192. 168. 0.0/24.We have all 6 WAPs on the internal network, with 2 SSID's on each WAP and each SSID is assigned to a VLAN. One SSID is internal for staff, the other is for guest access for members. The internal staff wireless access is working fine.
We want the guests to be able to access the internet, but not the internal network, but we need to access them for administration from the internal network.
We created a second VLAN on the switch and added the 6 WAP ports to it as tagged for VLAN2. These 6 ports are also on VLAN1 (default). We have a second VLAN on the router, have it handing out DHCP addresses for the 192.168.25.0/24 range with DNS servers.
Where we are having trouble is with getting the guests wireless access to work. Guests can see the wireless, log onto the access point but that's it. They don't appear to get a 192.168.25.0/24 IP, or any IP actually, and thus cannot do anything.
D-Link WBR 1310 - Setting Up Router / No Access To Modem
Dec 12, 2012The wireless is just beyond my computer's ability to detect. I have a D-Link WBR 1310 Router hooked up to a high gain wireless antenna-yes, clear line of sight. I have no direct access to our community modem or ISP.
View 10 Replies View RelatedSetting Up Belkin Router Wireless With Clear Modem?
May 1, 2012I have a CLEAR modem want to know how to setup my Belkin router so I surf the internet for my laptop and tablet pc. The subsection is the router.
View 1 Replies View RelatedLinksys Wireless Router :: Setting Up EA6500 Without A Modem?
Apr 8, 2013I recently purchased an EA6500 router to replace the crappy Westell 7550 AT&T provided me with. The 7550 was easily hooked up with two cords: the Ethernet cord into the computer and the Internet/data cable hooked into the DSL filter. I thought the EA6500 would have an easy installation, but it has not gone so smoothly. I hypothesize it's one of two problems - either the Internet/data cable is incompatible with the EA6500 (the cable works; I've re-tested it on the 7550), or it is because all instructions mention plugging the Internet/data cable into a modem's port while I do not have a modem. My Internet comes from a DSL filter attached to a telephone jack in the wall.
View 1 Replies View RelatedLinksys Cable / DSL :: Wag120n Modem Router Wireless Security Setting?
Jan 14, 2012I am using wag120n modem router but is confused abt how to setup it's wireless security.The wireless securit setting recommended in tutorial given here is very different from what is given in my routrs setting up page.
I don't know how to handle the key renewal option.If i leave it as 3600 seconds does that mean i have to enter a new key in my wireless device connected to the router after every 1 hour?
Wireless :: Need New Password For Modem / Router
Dec 27, 2011lost password on modum/wireless router
View 2 Replies View RelatedTP-Link ADSL2+ Wireless :: Lan Setting In ADSL Modem Router TD-W8968 Failed
Jan 2, 2013Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP : Streamyx
In the process of Lan setting my new wireless adsl modem router TD-W8968, an error message shown when I press save. Error Code: 1, Internal error.
Lost Internet Connection When Setting Westell 6100 Modem To Simply Bridge To Router?
Aug 1, 2011Earlier today I attempted to change the setting on my Westell 6100 modem such that it would simply bridge the connection to my Linksys WRT54GS router, basically involving setting the router to bridge only and turning DHCP off. Now I no longer get an internet connection through my router when previously the connection had worked perfectly fine before. I following the steps of cloning the MAC address to the router and have done the proper resetting steps (computer, them router, then modem) but I simply can't get an internet connection through my router. The process to set up simple bridging from the modem what supposed to end up with the internet light no longer turning on but the light turned back on following one of the resets.
Currently, I can connect to the internet through the modem just fine but I get nothing when I include the router. I'm not sure if there are some other settings I'm supposed to be changing as I can't seem to find anything past what I've already done when researching online. At this point I would just be happy reverting the settings I've changed but I don't know how to access the modem now that DHCP is off.Basically, I'd prefer to be able to get the router working with these new settings but if that proves too difficult (as I've heard it can be when trying to get Westell modems to work with Linksys routers) I'd like to learn how to access the modem and change the settings back to what they were (preferably in as simple terms as possible as I don't particularly understand what a lot of these settings/configurations do).(And a bit of an aside, but I had attempted to do this modem bridging to "fix" perceived internet speed problems. I've been averaging around 300Kbps download rates ever since I've had this internet connection from Verizon when the supposed download rates should be between 1MB and 1.3MB. Doing this modem bridging had been reported to fix some modem/router conflicts and improved connection speeds for some.)
Cisco WAN :: C2950 Vlan From Switch To Router For Cable Modem
Jun 25, 2012The current setup is as follows: Virginmedia Superhub in modem mode connected to one Cisco C2950 on port fa 0/23. The 2950 is connected to a Cisco C3550 over fa 0/24 via normal Cat 5e.Port fa 0/23 on the 3550 have a Astaro/Sophos UTM connected to it that acts as a Firewall/Wireless controller etc. The hitch, or maybe one of them, is that the 3550 and the UTM is on another floor from the 2950 and cannot be moved. The Virginmedia superhub can't be moved to the other floor either due to limitations in the cabling.What I'd like to achieve is for the UTM to pick up the public IP from the Virginmedia cable modem whilst no other devices on the Lan should be able to connect to the cable modem. All inbound/outbound internet traffic should go through the UTM for security reasons. The UTM have a number of available nic's that can be set to dhcp, static etc. I already have a number of VLANS on the router/switch and have half a suspicion that using another VLAN for this purpose might be the way forward but I'm not sure..
View 3 Replies View RelatedWag200g - Change Password In A Linksys Modem / Router?
Aug 4, 2011I have a Linksys wag200g Modem/router and I need to change my Emails registered password.
View 4 Replies View RelatedReconnect Cisco Wireless Router With 2wire Modem After Password Change?
Feb 8, 2011I have a 2wire Modem connected to a Cisco Wireless N Router, that is connected to another Cisco Wireless N Router. All was working well. In my absence sbc (AT&T) changed the pass word of the 2wire Modem. The 2wire has stoped communication with the Cisco Wireless N Routers. I connected am Ethernet wire to one of the ports of the 2wire, and connected it to the 2nd Cisco Wireless N Router. The signal gets to the 2nd Cisco Router. However, when I attempt to access the Internet on the CPU connected to the 2 Cisco Router, I get an error Message saying that there is a problem with the Modem and/or Router. On the available Networks selection screen I can see the connections that I want. The selection info shows connected. But when I try to connect, the I can't.
View 3 Replies View RelatedLinksys Wireless Router :: Wrt160nvv3 / Change Password Of Wifi Modem
Mar 1, 2013change password of my wifi modem.model cisco linksys: WRT160nVv3.
View 6 Replies View RelatedBelkin Routers :: Lost Admin Security Password Of N300 Share Modem / Router?
Feb 28, 2013i lost the admin security password of my N300 Share modem-router. How can i return to the factory settings ?
View 1 Replies View RelatedSetting Up Separate Networks With VLAN
Oct 3, 2012I'm new at this stuff and very stumped. I have one WAP with multiple SSIDs that support VLAN ID (for a private and guest wireless network) and a managed switch that supports tag or port based VLAN ID. How do I set up the switch so that the networks are separate, but can still reach their own routers to get on the Internet? In case details are necessary, the WAP is a Cisco Aironet 1130AG and the switch is a Netgear FS750T2
View 14 Replies View RelatedWS-C3548-XL-EN / Setting Up VLAN On Old Switch
Aug 26, 2012I have to admit I've never written my own Cisco configuration and I probably know just enough to break things. The last time I configured a Cisco was a few years ago, and the Wachovia people just told me what to type.
I have a Cisco WS-C3548-XL-EN and a Cisco WS-C3524-PWR-XL-EN "Inline Power" with default configurations and I want to setup VLANs. Basically, would this work?
SWITCH 1:Router on port 39, Wifi on Port 47, Uplink to 2nd switch's port 24 on port 48
Code:
en
conf t
interface VLAN10
no ip directed-broadcast
no ip route-cache
[code]....
And then I would test that it works, if it does issue #write memory, and it it doesn't powercycle and try again?
Cisco WAN :: Setting Up VLAN On RV082?
Feb 3, 2011I purchased a RV082 router because it said it would support VLANs, but I cant seem to get it set up how I want.
I would like the first internet port on the router to feed one VLAN with an IP address. I would like the second internet port (DMZ / Internet) to feed a second VLAN with a different IP address. These two VLANs should be completely separate. I can see how to set up VLANs but I can seem to find how to separate the feeds and assign them different IP addresses.
Can I set up the RV082 to do this?
Cisco :: 4500 - Setting Up VLAN With Motorola AP?
Jan 17, 2013We have a Cisco 4500 core switch and 2 Motorola AP 6532 access points. From the Motorola side the goal is to allow my corporate users access to network resources meanwhile offering my guest users only internet connectivity. My thought is to create two separate VLAN’s on my Cisco switch ex: vlan 10 (Business) 192.168.50.x and create another vlan 20 (guest) 192.168.2.x, also I made the proper configuration changes inside my Motorola AP device as well. From the Motorola I can ping myself but not my switch?
View 2 Replies View RelatedCisco Switches :: Setting Up Guest VLAN On SG 300-28
Nov 27, 2011I am primarely enquiring whether the setup I have explained below is actually possible, and if so then how I can set this up. I know it isn't the easiest configuration and I need to set this up without purchasing any more equipment if at all possible.I have a Cisco SG 300-28 setup with three VLAN's. [code] Default Gateway is 192.168.10.1 (Netgear Router)I have a Wireless network setup (Netgear WMS and 2 WAP's) configured with the TWO VLAN's (1 and 3). These go into ports on the Cisco SG 300-28 which are tagged on both VLAN's. The Business wireless worked fine but the guest network didn't reout out to the internet.After some troubleshooting I realised the reason the guest wasn't working was because there was no route back from the internet to the router.
The router I have isn't really ideal, it is a Netgear DGN2200, but I managed to create a static route to 192.168.30.1 with a metric of 2, with 192,168,10.254 being the hop. Success, the connection worked, the only problem is that now my guest network can see my business network because the business network is using the static route on my router to route back over to the guest network (due to the limitations of this device I can't do anything about that)Guest network can connect to Business VLAN via switch. I am assuming this is because the router is on the Business VLAN and the default gateway is the router. As they are on the same network the Guest network can inevetably see the business server and network.The Business network can get back to the Guest network via the router using my static route I created. The static route is really basic and I can't create a firewall rule on the router to prevent the Business network speaking to guest network because it only has a LAN - WAN firewall and this connection is LAN - LAN.
What I need is...to somehow stop any traffic from the 192.168.30.0 network routing to anything on the 192.168.10.0 network, appart from the router on 192.168.10.1.Is this possible? I have this setup on a number of different site, the only difference is I have a CIsco Security Router on these with the VLAN's configured so I don't have this problem. Because I have a rather limited Netgear DGN2200 I am unable to setup the VLAN's correctly and as such I need to see if I can do this on the switch in any way.
Cisco Switches :: Setting Up Routed VLAN On SG 300-20
Mar 24, 2011I got the SG 300-20 small business L2/L3 switch. I've read through the 325 page pdf manual and I still can't figure out how to do what I need to do. Here is my setup using example ips.[code]
I want to be able to have any workstation I put on the workstations vlan to use 69.30.44.2.34 as a gw and from there route to 170.4.5.5 and from there to the outside. Basiclly, I want to be able to route ips from two different subnets on two different vlans. I've read through the docs and so far I have vlan1 setup and vlan 2 setup fine but I have no clue how to get the routing to cross vlans. The docs say the only way to have vlans talk to each other is by routing through the vlans ip interfaces but I have no clue how. There isn't a simple step 1,2,3 chapter that gets you to route between two vlans. What am I doing wrong? I put in some IP route entries but nothing seems to work.
GS105E Setting Up VLAN On Netgear Switch
Feb 23, 2012I am trying to set up a VLAN on my Netgear switch (GS105E). I want to create two separate networks and I want both of them have internet access.
I have configured port 1 and port 5 as vlan1 and port 2 to port 4 as vlan2. I plugged a cable from the router to port 5, and the computer on port 1 has internet access. However, the computers on port 2 to port 4 have no internet access.I had tried to create VLANs with the router but had no luck.
DIR615 Password Setting From Mac OX?
Jul 5, 2012Though connection between DIR615 and Mac OX was successful, I cannot set password , I don't know how for Mac OX user.
View 1 Replies View RelatedRouters / Switches :: Setting Up A VLAN -GE-DSS-244 Layer 2 + Switch?
Mar 22, 2011I am migrating an a group of workstations that run a fire system from one software to another. The current workstations run the following info:123.123.123.xxx 255.255.255.0The new workstations run:100.100.100.xxx 255.255.255.0There is a central switch location using a GE-DSG-244 Layer 2+ Managed switch. There are two remote location using GE-DS-82 Managed Switches.The two networks must remain isolated, yet use the same fiber communications. The central switch connects to the two location using MM Fiber. From my research I believe I need to use the 802.1q standard to allow port trunking between the two switches.
View 7 Replies View RelatedCisco LAN :: 2950 / Can't Ping From One Vlan To Another After Setting Up Trunk
Apr 15, 2013I have been though the setup a couple of time with no luck pinging one pc to another from vlan 10 to vlan 20. I posted the running configs and some other information from my router and switch. I am relatively new to all of this so if you need me to post more information from the hardware let me know and Ill put it up. There are no firewalls in place and I know the cables are good because I switched them around to make sure. Also when I change the ip on my second machine for vlan 10 I can ping from one pc to the other but when I try the same for vlan 20 I get nothing.
**From my 2950 switch**
Current configuration : 2825 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
[code]...
Belkin F5d7230-4 Setting Password?
Jan 28, 2013Im trying to setup my wireless router I've had for a while to have a password.It has been unsecured since I've had it.I have the manual but not the install wizard.I tried probably a hundred times but cant seen to get it right.The model is F5D7230-4.I called the support number. The router works excellent but I just cant get the security password to setup.I reset it a few times and tried and tried with user manual directions
View 1 Replies View RelatedCan't Change Setting Of Modem
May 30, 2012I have read many guides about how to forwarding some port in routers, and i did exactly the same as tutorial,after trying many time i just noticed there is something wrong with my router well here the informations.my router model/name UTStarcom AR7RD im using Windows xp SP3 86x my firewall is disable (But i already added the ports i need to open in my firewall)my Upnp are disable in my router well my computer takes a ip from ISP soo i dont need static IP there is no option that let me delete the old useless ports,i searched almost all the sections of my router and i failed to find a thing that let me delete some port.i went to DMZ setting to Active it cuz its the last thing for me to able open some port, i went to DMZ SETTING and tried to enable the check mark for this section i noticed it wont enable, i got no error there just it wont be enable.im watching around its 2 weeks i search any where in different forums and googles.
View 14 Replies View RelatedSetting Up A Second Adsl Modem?
Jul 9, 2012I have a modem/router at one end of my house, but the WiFi doesn't reach the other end of the house (where I have my other PC). If I bought a second modem/router and plugged it in next to my computer, would that work?and if so, would I have to turn one modem off to use the other?
View 1 Replies View Related