Linksys Wireless Router :: EA4500 And PS3 Drops Connection
Jan 28, 2013
I had a WRT54G2 router and began having trouble with my PS3. It would connect for a few minutes then it would lose the internet connection. I thought maybe it was the router so I have the EA4500 now. The same problem is still happening. I connected all of my other wireless devices to the EA4500 with no problems. The PS3 connects and signs me in and then two or three minutes I'm disconnected. I called Sony and Cisco for assistance but in vain. The PS3 is showing my network has nearly 100% signal strength so that isn't a problem
View 4 Replies
ADVERTISEMENT
Nov 5, 2012
I just installed my EA4500 and my connection speed dropped from 20 mbits/s to around 3 or 4 mbs/s.When i connect directly with the modem, the speed gets back to normal.
View 2 Replies
View Related
May 14, 2013
Just installed a refurb EA4500 this past weekend after testing it for a week. The regular wireless network is very stable, but not much faster than my single-band DLink DIR655. Guest network seems to drop out from two connected iPhones, and when the connection drops, you have to re-login and type in the guest password everytime. The linksys firmware is up-to-date( Linksys smart wifi)and so are the iOS on the 2 iPhones. Just to add, on my old DLink, the guest network comes up secured also, so when you type in the passcode, it remembers it next it comes in range unlike the Cisco, which requires login at a web interface.
View 3 Replies
View Related
Jul 4, 2012
I got an E3200-RM (refurbished).
I did not do a MAC Address Clone, when I connected it I just called my ISP and they enabled it. Internet connection with all devices right there, no problem.
Problem started next day, every day I have to do a hard reset because when I wake up I have no connection with all devices (1 Ipad, 2 Iphones, 2 PCs, 1 Xbox 360, 1 PS3): My SSID is seen on the network but no device can connect to it.
I changed the Channels to manual as said on other threads, but didn't work.
In addition to that, when I try connecting my PC with the ethernet cable to the router -instead of wireless-, I have no internet connection on the PC and any other device that I try to reconnect to the router wirelessly can't connect anymore (have to do a hard reset again and unplug the ethernet cable).
the WRT54G worked perfectly for me...
View 6 Replies
View Related
Nov 30, 2012
My macbook keeps loosing it's wireless connection after being idle, when I start up I have to find my router and highlight it and connect and if it's idle it losers it's connection all the time.I tried resetting the router to default and started over I also tried every imaginable way of saving my password and connection but I can't find a way I've been into the routers security,trouble shooting,wireless, what's not holding it's connection to my MACBOOK? my iphone 5, ipad, and roku all hold
View 2 Replies
View Related
May 12, 2013
I have a Cisco EA4500 wireless router. The only issue I have had with this router is when power gets disconnected or if I have a power outage, I have to go through some loops to get it to work again usually taking upwards of 45 minutes to fix.
View 1 Replies
View Related
Jul 3, 2012
I have a problem with my new router. I connected't my iMac (27" 2010) and NAS Synology 1511. My problem is the slow connection between mac and router - only 100Mbit (ethernet port on mac is 1Gbit), strange thing... my NAS have 1Gbit with no problem, and the mac is not. I trying manual configure - forcing speed to 1Gbit, but then is no connection at all. I'm also trying changing wires, but no change. Im buying special ethernet cable cat 6 - also no change. Changing ports on router - result the same.
View 7 Replies
View Related
Jun 14, 2012
I recently upgraded my Wild blue internet service to the "Exede" system. When I kept losing the connection to my Mac Air book, the Wild blue service tech suggested that my wireless router (Linksys Wireless G 2.4 GHz router) was not robust enough to handle the increased "speed". They recommended I purchase a new router so I purchased the Linksys EA4500.
Now, after three weeks, the Linksys EA4500 router has stopped working. I am able to hook one of our Mac Books directly to the satellite modem to access the internet through an Ethernet connection. Finally, I finally reconnected my old Linksys Wireless G router to the modem to check to see if it would work and it does.
So, I'm wondering about the failure rate of the new Linksys EA4500 routers? Is there anything else I might try to get my new router to work??? I have unplugged it for an hour and then re connected it. I have pushed the reset button..My wireless indicator on the Mac Book Air shows full signal strength, but I can't connect to the internet with my new (less than 3 weeks old) router.
View 3 Replies
View Related
Apr 16, 2013
Purchased an EA4500 router. I'm using an old HP 4L laserjet and have it connected to the router via the USB port. I have 2 Mac's and installed vusb on both. I can successfully print from both Mac's, however I have to manually disconnect and connect the printer in the vusb client. I can't get the auto-connect and auto-disconnect settings to work by themselves. Any guidance on the proper settings here?Additionally, do I need to configure the printer driver though the vusb client? When I click "configure", I get an error saying"Cannot connect to Prolific Technology Inc. IEEE-1284 Controller.
View 3 Replies
View Related
May 17, 2012
My VPN connection is dropping every few minutes for a few seconds at a time over VPN on the E3000. It wreaks havoc with the applications that require a constant connection.
View 3 Replies
View Related
Jan 23, 2011
I have a WRT120N router .It has something to do with turning on or re-introducing certain wireless devices into the area. When I come home with my iPhone & my wife is on her computer, suddenly the wifi stops. And vice-versa. It's ridiculous. I'm not a computer programmer but if I was I'm pretty sure this would be a no-brainer to fix. Especially if the company that paid me took pride in their products.
View 8 Replies
View Related
Jan 13, 2012
I have a couple incredibly annoying problems with my E4200v2. I have one Win7 laptop that connects wirelessly and has been slowed to a CRAWL connected to this new router.3 of the 4 Android powered devices I have experience random and unexplained drops in Internet access. It seems they stay connected to the router itself but they lose Internet. Happens at random times and intervals.
View 9 Replies
View Related
Apr 9, 2012
my router drops connection several times a day. I have to unplug the router every day so that my devices can stay connected. I hate when this happens late at night when i'am upstairs and have to go 2 stairs down to get internet on my devices. For example if i want to connect my iPhone to my Wireless network it gives me an error with: 'No connection can be astablished with this network'.
View 1 Replies
View Related
Dec 18, 2012
I'm fairly new to setting up hardware. I have WRT54G2 router and drops internet connection with ATT DSL. When I go to repair the connection, the wireless connection disappears and I have to reboot the computer several times to get the connection to reappear. [code]
View 2 Replies
View Related
Aug 26, 2012
I have the latest version firmware
I am constantly getting dropped and timeouts accross all of my devices this has been hapening for several months now I think ever since I upgraded to 1.0.04
It says no internet access when the wired computers have it fine. Android phones, windows 7 pc, and chromebook.
View 6 Replies
View Related
Oct 19, 2011
Ive had the WRT160Nv3 for a while and its all been great but recently ive had some issues.Im not sure if this is my ISP but the connection to the router drops out or i lose connection to the internet.I thought the firmware was out of date so i updated to 3.03 from 3.02 and it doesnt seem to fix the problem. what it did was create new problem. now when you edit settings it says >> JAVASCRIPT; true or if i try to edit port forwording it wont save the data i enter.This was all brought to my attention when I tried to connect to my wireless and my SSID was not what i set it as, the router had some way been reset. could something of happened to the router for it to be acting all crazy.
View 1 Replies
View Related
Sep 8, 2011
Wired computer runs XP sp3. Wireless runs Ubuntu 10.04. Hooked to Embarq DSL modem. Setup worked flawlessly for a year or more. Now the router is sporadically dropping the internet connection for both PCs. I haven't discovered how to guarantee an immediate reconnection so the desktop is now connected directly to the modem. The modem is apparently stable as I'm not losing the internet connection. When the router is in the circuit, the internet connection may or may not appear shortly.
View 7 Replies
View Related
Aug 30, 2012
My ISP (OTEnet, Greece) offers IPv6 connectivity in the form of dual-stack IPv4/IPv6 with the requirement that the router supports DHCPv6 Prefix Delegation for establishing an IPv6 connection.Using other routers (Cisco 887W, DrayTek Vigor2130n), I have established an IPv4/IPv6 connection but I am unable to do so with the EA4500. As a matter of fact, when I have the "IPv6 - Automatic" option enabled the router not only cannot obtain an IPv6 prefix from the ISP but it gets stuck in the connection attempt and never obtains an IPv4 or an IPv6 address. I have to disable the IPv6 option in order to simply establish an IPv4-only connection without problems.So, my questions are:
1. Does the latest (2.1.38.38880) firmware support dual-stack IPv6 and DHCPv6 Prefix Delegation?
2. If the router cannot negotiate an IPv6 connection why is it not establishing an IPv4 connection only but gets stuck in the process?
View 9 Replies
View Related
Sep 19, 2012
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
View 2 Replies
View Related
Apr 11, 2012
I set up my new EA4500 last night, and configured the 5Ghz and 2.4Ghz bands with separate SSIDs (as recommended). While I can see the 2.4Ghz band with all of my devices, I cannot see the 5Ghz band with any of them.I followed the advice given (including the settings shown) on the EA4500 FAQ.Title: Personalizing and connecting to the 5 GHz wireless band on a Linksys Wireless-N routerArticle ID: 21466.Did that *multiple* times, and still nothing. I do have a dual-band capable adapter (Netgear RangeMax WNDA3100 Dual Band Wireless-N Adapter) that I know works on 5Ghz (because I had it working on my old dual-band WDNR3700v1). Similarly, I have PCs sitting less than 20 feet away that were previously able to see the 5Ghz band on my old router, but are now unable to see it on the EA4500.
View 9 Replies
View Related
Feb 1, 2013
I've set up PPPoE on my EA4500 router with a Vigor 120 modem in bridged mode and it says an internet connection is established, but the connection is extremely slow on all my devices. When I run the speed test within the EA4500 firmware it appears fine, but I cannot load any web pages on my laptop or other decives because the connection is so slow. The connection is slow with both wired and wireless connections. I've tried changing the MTU settings with no success. I've also tried using a different router and connecting the modem directly to my laptop and using PPPoE within the laptop and these both work fine, so I think it's clear there is a problem with the EA4500 router itself.
I'm just using the Vigor 120 to authenticate and connect to the internet itself, with the router in DHCP automatic configuration mode. I think this is causing a double NAT.
View 9 Replies
View Related
Nov 29, 2011
I have a brand new E4200 with two desktop computers using it with no problems. I also have a work Thinkpad laptop that I use a couple of times a week from home. Since day one of installing the new router, I have experienced the blue screen of death numerous times during the day (the number of times varies from 1 to 6 on a really bad day). I believe this is happening when I lose my connection to the router. I can see it trying to reestablish itself but the VPN will drop the connrection before it has a chance. I never lost my VPN connection until the day I installed the new router. Yesterday, at least one time it was unable to reestablish connectivity with the router and I had to reboot the laptop to get it connected. Could this have something to do with the IP address? I do not have any issues with the laptop when I am at work using a docking station.
So, I am wondering why I am constantly losing connectivity on the laptop only. The laptop has Windows XP and I am using AT&T Global Network Client to access the work network. Is there a setting somewhere that will fix this? Our IT folks rebuilt my laptop and I am still experiencing the same problem. I checked and I have the current version of the firmware for the router.
View 1 Replies
View Related
Aug 1, 2011
When we stream movies in two different rooms at the same time we drop our netflix or vudu connections. Can I enable or disable any settings on my router that would work. I love this router have 35 Mbps on internet speed so I don't think that is the problem. Range runs from 35 up to 45 Mbps all the time. I know how to access my router settings and navigate where to go and what to change if I can. I have 3 laptops, 1 wireless printer, two blue-ray devices attached.
View 7 Replies
View Related
Dec 27, 2011
I have an E2500 with the latest firmware upgrade (1.0.03). My configuration is simple, I have a fixed IP from my ISP with fixed DNS servers. I have one computer connected via cable and one connected via wireless and a laptop that gets connected on occasion wirelessly as well. I also have an android phone that I sometimes have the networking turned on and sometimes not. That doesn't seem to be affecting the router either as I've lost connections under both circumstances. The only thing I have different is I clone the MAC address as the ISP has my IP linked to my old Linksys MAC.
The problem is I randomly lose connection to the internet, the home network is still up it's just the internet goes down. I could be on the computer or not, sometimes while browsing sometimes after I browse for a while sometimes before I get started. Fortunately its not happened during one of my online games but it has happened just after I log off the game. It usually happens a couple of times a day.
View 6 Replies
View Related
Apr 13, 2012
I'm using a refurbished E4200 that's connected to a SpeedStream 5360 modem to establish an Internet Connection over PPoE (ATT DSL). Connected to Ethernet ports I also have a NAS and an Airtport Express (with wireless off - it's only there for AirTunes/AirPlay).I'm getting Internet drop offs and then completely lose the WiFi, about every other day.E4200 drops Interaction Connection (PPoE)
View 4 Replies
View Related
Jan 6, 2012
my E2500 drops the internet connection randomly. I have no issues with wired or wireless access to the home network (sharing files, sharing printers etc...). To fix the problem I log into the router and do a soft reboot from the status page.
I posted this earlier and the only response I received was a cut and paste answer to make some changes to my wireless settings. Seriously doubting the relevance of the post I made the changes anyway and as expected nothing changed, the router still loses access to the internet without any warning. When I replied that I hadn't thought that that was the problem but that I HAD made the changes mentioned and as I expected it DIDN'T work I get no response.
View 9 Replies
View Related
Jan 13, 2012
Often my router drops connection to all my devices. Multiple times a day. It's only for a minute or so, but it's annoying. I'm using a Linksys Wireless-N router (WRT160N) with WEP encryption. I'm running two Windows 7 laptops, LG BluRay player, Apple TV, Xbox 360 (Wired) iPhone 4, and a iPad 2. It doesn't matter if I'm browsing the web, watching Netflix, or playing a game, the connection gets lost. As we speak it happened again. I have no clue on what to do. I've reconfigured it multiple times. Firmware has been updated months ago.
View 6 Replies
View Related
Feb 28, 2011
I have the WRT400N router and using windows 7 (on this computer). It works perfectly with any computer I use in the house (there's 3). As soon as I open a laptop, its connected. My iPhone (we have 2) and an iTouch, are a different story. They connect, stay connected sometimes for 5 minutes, sometimes 5 hours, then will drop the connection out of nowhere. It doesn't matter how close or far I am from the router. Sometimes I'll get a message that I have an incorrect password (which it's not, which is why it DOES work). Sometimes I don't get a message at all (on the phones I'll just notice its on E/3G). Now, looking through the database I noticed there is a program for the valet routers that lets you add the phones, yet this doesn't apply to mine.
The tech in live chat told me it was the phones. I know its not as I had a wireless modem before this, and I never once lost a signal or had it ask me for an incorrect password.
View 5 Replies
View Related
Oct 15, 2011
2 days ago my e1000 died, so I went big and bought the e4200 (due to newness, its already loaded with Firmware 1.0.03 build 14) to aleviate my networking woes. I'm running into an issue where I'm utilizing both the 2.4Ghz bands and the 5Ghz band. My desktop as an AE1000, and I'm utilizing that on the 5Ghz band. Everything else in the house (Dell laptop, 2x iPhone 4 and an HP printer) are all connecting to the network wirelessly.
I have had 0 network issues with regards to my wired connections, or my 5Ghz connection. But my 2.4Ghz connection will continuously be unavailable. I have both bands set to brodcast, they have different names so my AE1000 can connect via 5Ghz band. Both yesterday evening, and this morning, my phones, laptop and printer cannot connect, and for the most part, the network doesn't show up on available networks. When it does show up, the devices can't connect.I'm proficient enough to do the general home networking, but I'm at a loss as to how to fix this, without a daily reboot of the router (which seems excessive and unwarranted for a 2 day old e4200 [or any router to be honest]).
View 2 Replies
View Related
Apr 20, 2012
I get frequest Airport Express wireless connection drop and reconnect with my replacement e4200v2 running the latest firmware. I have it connected the 5Ghz band and set to channel 161.
View 9 Replies
View Related
Aug 4, 2012
I haven't changed anything apart from the SSID names so I can choose which device has access to which band 2.4 or 5ghz.I've come across an issue with the wireless and it drops connection randomly. I have to then disable and enable wireless adaptor on my laptop to connect again.I have read reports of allot of people having this issue however the majority of the issues were over a year ago (2011). Am I to assume this issue was resolved with a firmware upgrade somewhere which I may of missed? My current firmware is 2.1.38.138880. Is this the most up to date?
View 5 Replies
View Related
Nov 19, 2011
I got the AE2500 Dual-Band Wireless-N USB Adapter. It connects just fine but it seems to like to disconnect on me. Mainly seems to do it when playing online games and testing out speed test.net It does "Download" test fine, "Upload" test is iffy. Sometimes I can run the test 1-2 times sometimes three times, but seems to always drop connection on one of the "upload" tests.
View 1 Replies
View Related
Nov 12, 2011
I have a brand new dir-655 of the B1 / 2.00NA version. It seems to keep a connection alive, but the wireless signal will suddenly and randomly disappear from all of my devices. I have reviewed this forum for hours and have made many changes to my settings, but nothing seems to keep the wireless signal from dropping.
Deleted the B mode, made sure the DNS entries were present, stick on one channel, etc. There are no other routers here and all of my phones operate on the 5 Ghz frequencies.
I never, not even once in three years, had this problem with the A version of the same router, but now it's a constant problem at least once a day. Nothing has changed by the router same brand and model but the newer hardware version.
The only remedy I have found is to reboot the router -- my devices will reconnect automatically once the router reboots, but there is no connection discovered once the connection drops regardless of how long the router sits doing its thing.
I've also notices that there are no wireless clients showing under status/wireless...they were there earlier today, but since the latest reboot, gone.
View 14 Replies
View Related
