Been trying to connect to the internet through the modem with ethernet cabe and it repeatedly does not connect. I've set up teh router with the linksys setup program and still nothing.
View 1 Replies
When I connect the ethernet directly to my mac the internet works fine, but when I try to connect through my Linksys WRT54G2 V1 Wireless-G Broadband Router I can't connect to the internet. Omitting a few minor problems, my router has been working fine for the past year and a half. Recently it started giving me trouble so i have started trying a number of things to fix it, but I'm no expert in this category. The other day i tried updating the firmware which actually worked for a couple of hours, but then stopped working again.
View 3 Replies View RelatedMy WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies View RelatedI'm not really computer savy and I have an old wireless G Broadband router model # WRT54G2 V1 .
View 1 Replies View RelatedWent away on vacation for a couple of weeks and when I got back my Linksys WRT54G2 has lost it's configuration. It's showing a WiFi signal, but is no longer password protected.
I've tried connecting with a desktop on the same network, to 192.168.1.11, but that address is not connecting. I tried to reach it with my iPad wirelessly, and it's giving me the login screen, but not allowing me to login. I tried to use the reset button on the back to reset it to the factory default, but then I should be able to login with no username and the password of "admin", correct? But that's not getting me in either.
I'd like to get this network password protected again and not offer a signal to all of my neighbors.
I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi. I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.I Try chatting with Cisco support and was told he was no longer under warranty.
View 6 Replies View RelatedMy laptop connects fine, so I know it is working, but I cannot get my IPhone to connect. I keep getting an error message stating "Incorrect Password" but I know the password entered is correct.
View 9 Replies View RelatedI have a WRT54G2 router with a desktop wired to it. The desktop is mine and my roommate wirelessly connects with her laptop and has been doing so no problem for about 6 months (ever since we got the router). On Christmas Eve, she was connected, went out, came home and found she'd lost her wireless connection. Now she can't get it back.I can still get online on the desktop.i've power cycled to no avail. What is weird is sometimes she will click on the list of available networks (so she can choose which she wants to connect to) and mine WILL be there, other times it will NOT. If she does happen to catch it at a moment when my network is there, and she tries to connect using the passphrase, it says "Trying to connect" or something to that effect, for like 3 minutes and then nothing happens. Also, not that I would need to, but if I go to "connect to" on my PC (as if I were looking to choose a network to connect to), my network name doesn't always show. It is random. Sometimes it does not even show when I go to "Networks" on my desktop.
View 9 Replies View RelatedI have this router back in my home office for my wife's Mac laptop. I recently purchased a new Sony TV with internet access capability and was hoping to gain access through my router, however during set-up attempt it will not connect. My wife is able to use her laptop in the same area as the TV.
View 3 Replies View RelatedI cannot establish a local connection between my new WRT54G2 v1 and my Slingbox Classic. I have reset the Slingbox to factory default settings and run the Sling setup wizard but keep getting told that "No Slingoxes Exist on network". The link light is on on both the router and the Slingbox. Slingbox does not show up in the DHCP host table.
View 4 Replies View RelatedI recently purchased a smart phone that can use my wireless access to get to the internet, however the phone cannot connect. I have verified that I am using the correct password and it is finding the network just fine, it just can't connect. I have had this problem with my laptops as well, but with them I just copied the key to a USB key and used that to get them going. I don't have that ability with the smart phone.
how to best troubleshoot this issue and resolve it? I have also reset the router to allow anonymous internet access with no positive result there either.
I cannot get my JE200 reader to connect. I keep getting an error message stating "No networks available". I have been able to connect my e-reader to other wireless networks so I know it works.
View 3 Replies View Relatedrecently my internet got disconnected, they reconnected my internet configured my modem when i tried to connect my router ,it would connect to my comp but it said there was no internet. I reset it to factory settings via ip address and then threw the button on the router when i installed software it keeps saying that the router cannot recognize the internet and i should contact my internet provider, but my internet is working when i connect it to the comp directly?
View 4 Replies View RelatedI have a WRT54G2 router and when I try to connect to the internet, both wired and wirelessly, my network icon gives me a "No Internet Access" yellow sign icon. I have successfully connected to the internet by directly connecting to the modem and I have connected to other wireless networks using this computer so I have pretty much narrowed the problem down to the router. I have already perform a firmware upgrade to the latest version and did a hard reset of the router and setting it back up, to no avail. One problem I ran into while I was setting up though was that I can't even set it up with the WiFi-protected setup so I had to set up the password and stuff manually, as I have always done successfully in the past. I've never had a problem with this router in the past and so I think this router may be due for a replacement. I have contacted support through live chat and all the options they're giving me is either pay $25 to talk to someone about this or go through troubleshoot section.
View 2 Replies View RelatedI have A a linksys WRT54G2 and am trying to connect it to my wii. I had my Wii search for an access point And it found my router. I put in my password and it was accepted but I am still Not Connected to the internet.
View 3 Replies View RelatedWe purchased a Canon MG 3100 printer but am unable to connect. Have rebooted router but still no joy.
View 5 Replies View RelatedI recently (~month ago) switched to a new computer after my old one (which I had configured the router on previously with no problems) died.Since then, I have been unable to access my router's config page (entering in the ip address simply results in a blank page with no prompt for username/password). Switching browsers (I've tried Firefox 5 and IE 8) does not solve the problem, nor does disabling AdBlockPlus/NoScript on Firefox. Any way to access my router so I can begin forwarding ports again?
View 1 Replies View Relatedi have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
View 3 Replies View RelatedI can connect to skype but i can't browse anything in the internet. I'm using a CISCO WRT54G2 wireless broadband router.I cannot ping also but im online in skype or chatting application.
View 5 Replies View RelatedMy computers will not connect through to the internet. It's not the modem, because if I connect my desktop directly to the modem, it connects fine (which is how I'm typing this now), but if I plug in the router, my desktop and my laptop (wireless) will show they're connected to the network, but that there is no internet connection available. Support won't troubleshoot because I've had my router 1 year and 10 days (which I think is a crock of **bleep**) and the "Guide Me" thing is just running me around in circles. I'm so pissed off I'm about to throw the router through a window and buy another (*NON*-Linksys) router, rather than pay $30 for one time tech support (which, with my luck, the same thing would happen again in 3 months, and the same directions wouldn't work then). I've done a factory reset, and set up the router from scratch, done a firmware upgrade, everything, but it still won't connect
View 1 Replies View RelatedI recently purchased one simply because we needed a wireless router with my roommate using a new laptop. Installation went by without a hitch but when it came to actually using the internet, it was so sluggish that it was impossible to use, on either computer. In fact, I had to disconnect the router and go directly from the modem to even make this post.
I've upgraded the firmware and I thought it was fixed because the internet seemed to be moving at a decent pace (loading pages, speed tests), but then it went back to moving incredibly slow if not timing out altogether. There was a problem with random disconnects but that was something that the firmware upgrade did seem to fix outright.
I recently purchased one simply because we needed a wireless router with my roommate using a new laptop. Installation went by without a hitch but when it came to actually using the internet, it was so sluggish that it was impossible to use, on either computer. In fact, I had to disconnect the router and go directly from the modem to even make this post.
I've upgraded the firmware and I thought it was fixed because the internet seemed to be moving at a decent pace (loading pages, speed tests), but then it went back to moving incredibly slow if not timing out altogether. There was a problem with random disconnects but that was something that the firmware upgrade did seem to fix outright.
Lose internet connection at least once a day. Each time regaining by unplugging power cord for approx. 10-12 seconds. Is this a router failure and maybe needs replacing or ?
View 2 Replies View RelatedIn my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
My PC will connect just fine, but it is the only device on my network that the router will allow internet access. The router will allow other devices (DVR, laptop, nook) to connect to it, but won't allow those devices to connect to the internet. Each device will show the same error, - "connected to linksys - no internet". I've reset the router many times with no results.
View 1 Replies View Relatedmy router's wifi has no internet access tried hard reset and firmware upgrade. but i can used it when i connect my laptop on the lan ports.
View 3 Replies View RelatedI'm trying to configure my Linksys WRT54G2 router as my primary router and have my Actiontec just used for the my FIOS TV (eg VOD, widgets, guide). I've googled many HOWTO's on how to do this but I just cant get it working. So setup up will look like this in th end:
(DHCP Server)
(Wireless) (Only TV)
Internet >> WRT54G2 >>> Actiontec >>> PC/Laptops
|
FIOS TV -------------
how to set this up? I understand that the STB devices configured on my Actiontec routers is actually my TV receiver and currently configured with the following IP addresses:
IP-STB1:Connection Type: Coax
192.168.1.100
IP-STB2:Connection Type: Coax
192.168.1.101
IP-STB3:Connection Type: Coax
192.168.1.103
I have COAX Ethernet setup so everything is going through ethernet per Verizon phone tech.
Actiontec Firmware Version: 4.0.16.1.56.0.10.11.6
WRT54G2 = DDWRT firmware
I've tried the following HOWTO's to no avail.[URL]
I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies View RelatedI lost my installation cd for my Linksys devise. How can I find free instructions to connect manually?
View 1 Replies View Related- How can I connect an old 2600 router to a linksys WRT54G2. to access the internet. I think it is not possible
- What device do i need to be able to do it
Just got the WRT54G2 and setup it fine with or without encrytion and passwords - however when I setup the other 2 pcs on my network - the only way I can get them setup and going is WITHOUT encryption and password protection - setiing up without encryption on those works fine, but it defeats the purpose of what I'm trying to do. I was on the phone with Linksys for over an hour and they can't seem to get it to work either - guess they got stumped and after an hour - I was put on hold and then cut off.
View 9 Replies View RelatedI want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 5 Replies View RelatedI want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 1 Replies View Related
