Linksys Wireless Router :: WRT54G2 / No Internet Access
Oct 28, 2011
I have a WRT54G2 router and when I try to connect to the internet, both wired and wirelessly, my network icon gives me a "No Internet Access" yellow sign icon. I have successfully connected to the internet by directly connecting to the modem and I have connected to other wireless networks using this computer so I have pretty much narrowed the problem down to the router. I have already perform a firmware upgrade to the latest version and did a hard reset of the router and setting it back up, to no avail. One problem I ran into while I was setting up though was that I can't even set it up with the WiFi-protected setup so I had to set up the password and stuff manually, as I have always done successfully in the past. I've never had a problem with this router in the past and so I think this router may be due for a replacement. I have contacted support through live chat and all the options they're giving me is either pay $25 to talk to someone about this or go through troubleshoot section.
View 2 Replies
ADVERTISEMENT
Aug 5, 2011
i have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
View 3 Replies
View Related
Dec 25, 2011
My PC will connect just fine, but it is the only device on my network that the router will allow internet access. The router will allow other devices (DVR, laptop, nook) to connect to it, but won't allow those devices to connect to the internet. Each device will show the same error, - "connected to linksys - no internet". I've reset the router many times with no results.
View 1 Replies
View Related
Mar 31, 2012
my router's wifi has no internet access tried hard reset and firmware upgrade. but i can used it when i connect my laptop on the lan ports.
View 3 Replies
View Related
Jan 18, 2013
Really not grab Router Gateway, even as did the 30-30-30 reset because I had all the lights on, and is still in trouble. I am currently connected via ethernet to the router only. And yet not grab us Links Home door. The lights now are Power, WIFI and Port 4.
View 2 Replies
View Related
Jan 23, 2013
I have a self-contained (not connected to the Internet) network where I have a WRT54G wireless router serving several laptops at Location A, but will need the ability to connect laptops at Location B, over 100' away. I also have a WRT54G2 laying around. Is it possible to use that to wirelessly get the laptops at Location B connected to Location A, or is that only possible using a cabled connection between both routers?
View 5 Replies
View Related
Jun 17, 2012
I trying to portforward on my WRT54G2 router but can't access webpage because I don't know the username or password. Is there any way to find out the password and username
View 1 Replies
View Related
Feb 28, 2013
I have a continuing problem with my WRT54G2 wireless router. I set up my network, changing the password for the router, and I change the SSID, as well as the encryption password. When I set it up, and after changing passwords etc. I always log off, go back and log on, and it works fine. Once I set up the network, over time, I'll notice a device will no longer connect via wireless. When that happens, I try to log on to the router, and can not connect to the router using either Firefox or IE. When I try, I get Internal Server Error, or just nothing. I can ping the router, and if I run an IPCONFIG at this point, the default gateway does show 192.168.1.1. Every time this starts to happen, I must do a hard reset of the router. Once I do this, I can connect, and log on using the default settings, and re-set everything. This is a HUGE pain, as it takes a lot of time, and happens way too often.
View 2 Replies
View Related
Jul 31, 2012
So i tried to update firmare for FW_WRT54G2V1.5_1.5.02.005_US_20120221
and router just lost its connection. No i cant get access not via wifi nor ethernet to 192.168.1.1
I just have power led blinking. Tried to reset for 30 sec, no luck
View 2 Replies
View Related
Jul 4, 2011
I have this router back in my home office for my wife's Mac laptop. I recently purchased a new Sony TV with internet access capability and was hoping to gain access through my router, however during set-up attempt it will not connect. My wife is able to use her laptop in the same area as the TV.
View 3 Replies
View Related
Jul 16, 2011
I bought wrt54g2 several years ago and everything worked fine until this week. I got trouble with this router now.All the computers at my home couldn't access to this router even just connect to router's setup page at 192.168.1.1. The only way go to setup page through LAN Cable .I'm afraid maybe there's interference channel with my neighbor, then I did some change to router channel already, but the result same. I still couldn't access to the router through WIFI
Fyi, I did upgrade the firmware with the latest one and all the computers distance to the router not more then 5 m and in the clear area
View 6 Replies
View Related
Jul 8, 2011
When I connect the ethernet directly to my mac the internet works fine, but when I try to connect through my Linksys WRT54G2 V1 Wireless-G Broadband Router I can't connect to the internet. Omitting a few minor problems, my router has been working fine for the past year and a half. Recently it started giving me trouble so i have started trying a number of things to fix it, but I'm no expert in this category. The other day i tried updating the firmware which actually worked for a couple of hours, but then stopped working again.
View 3 Replies
View Related
Jan 20, 2012
Been trying to connect to the internet through the modem with ethernet cabe and it repeatedly does not connect. I've set up teh router with the linksys setup program and still nothing.
View 1 Replies
View Related
Jan 11, 2012
recently my internet got disconnected, they reconnected my internet configured my modem when i tried to connect my router ,it would connect to my comp but it said there was no internet. I reset it to factory settings via ip address and then threw the button on the router when i installed software it keeps saying that the router cannot recognize the internet and i should contact my internet provider, but my internet is working when i connect it to the comp directly?
View 4 Replies
View Related
Jul 19, 2010
I have A a linksys WRT54G2 and am trying to connect it to my wii. I had my Wii search for an access point And it found my router. I put in my password and it was accepted but I am still Not Connected to the internet.
View 3 Replies
View Related
Oct 13, 2011
I am using the WRT54G2 connected to a cable modem that requires a PPPoE login. I followed the Service Providers instructions and cloned the modems MAC address to the WRT54G and setup the PPPoE user id and password. I can then plug my PC into one of the Ethernet connections on the back of the WRT54G and everything works as expected. First I connect to the WRT54G2 and then I open a PPPoE connection in my network settings and it logs into the service provider and everything works as expected. But when I connect to the WRT5G2 wirelessly I connect to the AP fine. When I open the same PPPoE connection to the service provider it fails, the message says I have the wrong userid or password or that the protocol is not supported. Of course I know the userid and password is correct because it works when connected with Ethernet cable. I have tried disabling the security on the wireless network but that did not seem to work.The modem is a HomePNA HCNA Voice Endpoint.I am at the latest firmware 1.0.04.
View 7 Replies
View Related
Nov 3, 2011
I can connect to skype but i can't browse anything in the internet. I'm using a CISCO WRT54G2 wireless broadband router.I cannot ping also but im online in skype or chatting application.
View 5 Replies
View Related
Aug 27, 2011
My computers will not connect through to the internet. It's not the modem, because if I connect my desktop directly to the modem, it connects fine (which is how I'm typing this now), but if I plug in the router, my desktop and my laptop (wireless) will show they're connected to the network, but that there is no internet connection available. Support won't troubleshoot because I've had my router 1 year and 10 days (which I think is a crock of **bleep**) and the "Guide Me" thing is just running me around in circles. I'm so pissed off I'm about to throw the router through a window and buy another (*NON*-Linksys) router, rather than pay $30 for one time tech support (which, with my luck, the same thing would happen again in 3 months, and the same directions wouldn't work then). I've done a factory reset, and set up the router from scratch, done a firmware upgrade, everything, but it still won't connect
View 1 Replies
View Related
May 13, 2012
I recently purchased one simply because we needed a wireless router with my roommate using a new laptop. Installation went by without a hitch but when it came to actually using the internet, it was so sluggish that it was impossible to use, on either computer. In fact, I had to disconnect the router and go directly from the modem to even make this post.
I've upgraded the firmware and I thought it was fixed because the internet seemed to be moving at a decent pace (loading pages, speed tests), but then it went back to moving incredibly slow if not timing out altogether. There was a problem with random disconnects but that was something that the firmware upgrade did seem to fix outright.
View 2 Replies
View Related
Dec 19, 2009
I recently purchased one simply because we needed a wireless router with my roommate using a new laptop. Installation went by without a hitch but when it came to actually using the internet, it was so sluggish that it was impossible to use, on either computer. In fact, I had to disconnect the router and go directly from the modem to even make this post.
I've upgraded the firmware and I thought it was fixed because the internet seemed to be moving at a decent pace (loading pages, speed tests), but then it went back to moving incredibly slow if not timing out altogether. There was a problem with random disconnects but that was something that the firmware upgrade did seem to fix outright.
View 9 Replies
View Related
Nov 30, 2011
Lose internet connection at least once a day. Each time regaining by unplugging power cord for approx. 10-12 seconds. Is this a router failure and maybe needs replacing or ?
View 2 Replies
View Related
Nov 29, 2009
I'm trying to configure my Linksys WRT54G2 router as my primary router and have my Actiontec just used for the my FIOS TV (eg VOD, widgets, guide). I've googled many HOWTO's on how to do this but I just cant get it working. So setup up will look like this in th end:
(DHCP Server)
(Wireless) (Only TV)
Internet >> WRT54G2 >>> Actiontec >>> PC/Laptops
|
FIOS TV -------------
how to set this up? I understand that the STB devices configured on my Actiontec routers is actually my TV receiver and currently configured with the following IP addresses:
IP-STB1:Connection Type: Coax
192.168.1.100
IP-STB2:Connection Type: Coax
192.168.1.101
IP-STB3:Connection Type: Coax
192.168.1.103
I have COAX Ethernet setup so everything is going through ethernet per Verizon phone tech.
Actiontec Firmware Version: 4.0.16.1.56.0.10.11.6
WRT54G2 = DDWRT firmware
I've tried the following HOWTO's to no avail.[URL]
View 9 Replies
View Related
Aug 12, 2012
My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies
View Related
Sep 18, 2011
I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies
View Related
Oct 24, 2012
I have a Linksys WRT54G2 wireless router that is used in an office setting. We have, of course, set a password to access (wireless) the internet and local file sharing network from a laptop. Occasionally, however, we have guests that want to access the internet. Is it possible to give the guest a temporary password that is different than the main one? Also, is it possible to limit the guest to only the internet and not the local file sharing network?
View 1 Replies
View Related
Feb 26, 2012
forgot password for Linksys WRT54G2 and can't connect wife's new Ipad; i'm not real popular at the moment. went on cisco site and they gave a technique where you input IP address and a screen is supposed to pop up with a "wireless" tab, then give access to another tab where you can view your pw.BTW, if I reset it entirely do I have to reset each of the computers now hooked up to it?
View 1 Replies
View Related
Mar 22, 2011
So I've had this problem before and normally I solve it by simply unplugging everything from my modem and router but ive tried that this time several times to no avail. The internet suddenly cut out one day and when I did my usual unplugging thing it came back unbearably slow.Right now I'm running off a motorola SB5100 Surboard modem and a linksys WRT54G2 router and its not my computer, everyone in the house is getting terrible speed.
View 10 Replies
View Related
Oct 9, 2011
I have a Linksys WRT54G2 V1and I am trying to hook it up to my broadband modem after hooking up the connections it still does not recognize?
View 2 Replies
View Related
Mar 27, 2011
Yesterday my wireless internet suddenly stopped working. I plugged the ethernet cable directly from the modem to the computer and everything was fine, so I reset the router, reconnected it to the modem, and went to the setup page 192.168.1.1. I reconfigured the router on the setup page, leaving all previous settings the same (except I renamed the network from linksys to our own name and reconfirmed the WPA Personal password). My computer can connect to the wireless network but I can't go online.
View 9 Replies
View Related
Nov 28, 2011
I have a WRT54G2 v1 (no new firmware available) with a cable-modem connection (Motorola Surfboard), every thing works perfect but when my ISP goes down and then back up I cannot get the router work, LAN or Wifi connection. I have ping response to the router and I'm also able to get into the admin page. The only way to recover is restarting the router and sometimes releasing DHCP and then Renewing it, and the Wan connection actually gets the same IP it had before.
View 3 Replies
View Related
Nov 4, 2012
I'm not really computer savy and I have an old wireless G Broadband router model # WRT54G2 V1 .
View 1 Replies
View Related
Oct 5, 2011
Went away on vacation for a couple of weeks and when I got back my Linksys WRT54G2 has lost it's configuration. It's showing a WiFi signal, but is no longer password protected.
I've tried connecting with a desktop on the same network, to 192.168.1.11, but that address is not connecting. I tried to reach it with my iPad wirelessly, and it's giving me the login screen, but not allowing me to login. I tried to use the reset button on the back to reset it to the factory default, but then I should be able to login with no username and the password of "admin", correct? But that's not getting me in either.
I'd like to get this network password protected again and not offer a signal to all of my neighbors.
View 2 Replies
View Related
Oct 4, 2008
I've tried to connect my father's laptop and my father's girlfriend's daughter's PC to my Linksys Wireless Router, model #WRT54G2 V1. So far, I have steady and fast internet access on my PC which so far I've only gotten my father's laptop to connect through. However, I can't figure out how to get her PC to get internet access through my router. I'm mediocre at configuring computers, and I'm absolutely terrible at routers. :/ There was the possibility that her computer isn't new or advanced enough or whatever to be compatible with a wireless router, but at the same time she has a Wireless Network Setup Wizard app. in the control panel area, so wouldn't I be correct in assuming that if a computer has a wizard dedicated to it, it is compatible? I've run Wireless Network Setup Wizard as well as just plain Network Setup Wizard, and I've had them both read that it was successful connecting to my Router's network...but where do I go from there? I've never had to mess with a PC before so I'm not entirely sure. She has a modem, which can not be plugged into the phone jack at the same time as my modem otherwise we both do not have internet access, however if one of us plugs in that person is fine, so that's when I figured I'd try to get her PC into my network with my dad's laptop. Also, we have a Broadband connection setup through Verizon, if that matters at all. Does she need a modem to hook up to my network at all? If so, does that modem need to be plugged into the phone jack? If required I'll give her OS and PC specs and such, but from what I know just being on her computer she runs Windows XP as an OS and her computer is an "eMachine".
View 9 Replies
View Related
