So i tried to update firmare for FW_WRT54G2V1.5_1.5.02.005_US_20120221
and router just lost its connection. No i cant get access not via wifi nor ethernet to 192.168.1.1
I just have power led blinking. Tried to reset for 30 sec, no luck
I am using the WRT54G2 connected to a cable modem that requires a PPPoE login. I followed the Service Providers instructions and cloned the modems MAC address to the WRT54G and setup the PPPoE user id and password. I can then plug my PC into one of the Ethernet connections on the back of the WRT54G and everything works as expected. First I connect to the WRT54G2 and then I open a PPPoE connection in my network settings and it logs into the service provider and everything works as expected. But when I connect to the WRT5G2 wirelessly I connect to the AP fine. When I open the same PPPoE connection to the service provider it fails, the message says I have the wrong userid or password or that the protocol is not supported. Of course I know the userid and password is correct because it works when connected with Ethernet cable. I have tried disabling the security on the wireless network but that did not seem to work.The modem is a HomePNA HCNA Voice Endpoint.I am at the latest firmware 1.0.04.
View 7 Replies View RelatedI bought wrt54g2 several years ago and everything worked fine until this week. I got trouble with this router now.All the computers at my home couldn't access to this router even just connect to router's setup page at 192.168.1.1. The only way go to setup page through LAN Cable .I'm afraid maybe there's interference channel with my neighbor, then I did some change to router channel already, but the result same. I still couldn't access to the router through WIFI
Fyi, I did upgrade the firmware with the latest one and all the computers distance to the router not more then 5 m and in the clear area
my router's wifi has no internet access tried hard reset and firmware upgrade. but i can used it when i connect my laptop on the lan ports.
View 3 Replies View RelatedI'm using a refurbished WRT54G2 v1.5 router. I've had the router for two and a half years and have never had a problem. I recently unplugged my DSL modem and this router to move them, and when I plugged them in again, the router stopped picking up the internet signal from the DSL modem. I'm able to get internet when I hardwire directly to the modem though. I tried resetting the router and setting the router up from scratch again, but now I just get error 321 Ethernet cable not connected when I try and run the setup cd.
View 6 Replies View RelatedIn my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
I am trying to install my router but I keep getting the error message that my ethernet cables are not connected. I have tried several times and everytime I know that the cables are in correctly. Is there anyway to solve this problem?
I am running in XP and my router is WRT54G2.
I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi. I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.I Try chatting with Cisco support and was told he was no longer under warranty.
View 6 Replies View RelatedI'm out in the middle of nowhere and just set up a few days ago a WRT54G2 V1 wireless 4-port router a family member had laying around. I had no problem getting it working and running. About an hour ago I noticed I wasn't picking up the wireless with my cell phone and went to check it on my laptop, I had no wireless connections available. It wasn't my adapter or anything since I know there are no other connections out where I am. I went to reset the router and found it had taken issue with that. Once I powered everything back on the router stopped responding and became "stuck" in an annoying state. It doesn't respond to the reset button, unplugging and replugging, nothing. Whether the internet was plugged in or not it will not move past what it's doing now.
View 5 Replies View RelatedMy router has been dropping the internet connection for years. The ethernet connection to the desktop works fine all the time. The problem is only with the wireless connection. About every 1/2 hour or so the router will drop the wireless connection and neither or my 2 laptops can find the network. Unplugging the router and replugging it in solves the problem temporarily, until it drops it again. I updated the firmware to 1.0.4 and that yielded no changes.
Router: WRT54G2 v.1 Modem: Siemens Speedster 4100 (part #060-D141-A12) My two laptops running wirelessly are Macs. The desktop is PC running Windows Vista.
We purchased a Canon MG 3100 printer but am unable to connect. Have rebooted router but still no joy.
View 5 Replies View RelatedI have bought a new WRT54G2 router since the old one broke down. When I log into the 192.168...and click wireless, it takes me to this window that says Searching for your Client Device....If you haven't clicked wi-fi protected setup button please do so now. It's stuck at 98% and I click on the bottom middle button with the 2 arrows constantly and nothing is happening.
View 5 Replies View RelatedReally not grab Router Gateway, even as did the 30-30-30 reset because I had all the lights on, and is still in trouble. I am currently connected via ethernet to the router only. And yet not grab us Links Home door. The lights now are Power, WIFI and Port 4.
View 2 Replies View RelatedI want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 5 Replies View RelatedI want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 1 Replies View RelatedI have a WRT54G2 router and when I try to connect to the internet, both wired and wirelessly, my network icon gives me a "No Internet Access" yellow sign icon. I have successfully connected to the internet by directly connecting to the modem and I have connected to other wireless networks using this computer so I have pretty much narrowed the problem down to the router. I have already perform a firmware upgrade to the latest version and did a hard reset of the router and setting it back up, to no avail. One problem I ran into while I was setting up though was that I can't even set it up with the WiFi-protected setup so I had to set up the password and stuff manually, as I have always done successfully in the past. I've never had a problem with this router in the past and so I think this router may be due for a replacement. I have contacted support through live chat and all the options they're giving me is either pay $25 to talk to someone about this or go through troubleshoot section.
View 2 Replies View RelatedI have a self-contained (not connected to the Internet) network where I have a WRT54G wireless router serving several laptops at Location A, but will need the ability to connect laptops at Location B, over 100' away. I also have a WRT54G2 laying around. Is it possible to use that to wirelessly get the laptops at Location B connected to Location A, or is that only possible using a cabled connection between both routers?
View 5 Replies View RelatedI trying to portforward on my WRT54G2 router but can't access webpage because I don't know the username or password. Is there any way to find out the password and username
View 1 Replies View Relatedi have a WRT54G2 and i have it plugged in. i want to avoid downloading things but i had this thing working a month ago, it says its connected but no internet connection.
View 3 Replies View RelatedI have a continuing problem with my WRT54G2 wireless router. I set up my network, changing the password for the router, and I change the SSID, as well as the encryption password. When I set it up, and after changing passwords etc. I always log off, go back and log on, and it works fine. Once I set up the network, over time, I'll notice a device will no longer connect via wireless. When that happens, I try to log on to the router, and can not connect to the router using either Firefox or IE. When I try, I get Internal Server Error, or just nothing. I can ping the router, and if I run an IPCONFIG at this point, the default gateway does show 192.168.1.1. Every time this starts to happen, I must do a hard reset of the router. Once I do this, I can connect, and log on using the default settings, and re-set everything. This is a HUGE pain, as it takes a lot of time, and happens way too often.
View 2 Replies View RelatedMy PC will connect just fine, but it is the only device on my network that the router will allow internet access. The router will allow other devices (DVR, laptop, nook) to connect to it, but won't allow those devices to connect to the internet. Each device will show the same error, - "connected to linksys - no internet". I've reset the router many times with no results.
View 1 Replies View RelatedI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View Relatedmy linksys e1000 router compares pretty well to my modem when the Ethernet cable is hooked up. I get fast DL speeds above 50Mbps either way when the Ethernet cable is plugged into my computer. However, when I connect wirelessly, regardless of range I can't seem to DL any faster than 20Mbps. I went ahead and restored my factory defaults so that I could use Cicsco Connect and upgrade the firmware, but beyond that I don't know what settings to tweak.
View 6 Replies View Relatedlost wireless to all wireless devices (laptop, iPhone and iPad). Still have hard wired ethernet internet access from desktop. Tried resetting router, powering off router, resetting and powering off cable modem. Nothing works. Lights on router all on.
View 1 Replies View RelatedI have a E4200 v1, connected with a few PCs by ethernet ports and various devices by wifi. Now the wireless devices work perfectly but sometimes the PC via ethernet ports cannot connect to LAN and internet.
View 2 Replies View RelatedWRT400N worked great for 18 months.
Last week the Verizon-supplied DSL modem went bad (wasn't receiving data) and was replaced.
Now I can get Internet direct out of modem, and when I connect it to router the router's Internet light is on, but it seems to stop there. Devices connected to router via Ethernet or wifi don't get Internet.
I'm able to get to the router's admin console via Ethernet and wifi, but no Internet.
I have a Linksys WRT54G2 wireless router that is used in an office setting. We have, of course, set a password to access (wireless) the internet and local file sharing network from a laptop. Occasionally, however, we have guests that want to access the internet. Is it possible to give the guest a temporary password that is different than the main one? Also, is it possible to limit the guest to only the internet and not the local file sharing network?
View 1 Replies View Relatedforgot password for Linksys WRT54G2 and can't connect wife's new Ipad; i'm not real popular at the moment. went on cisco site and they gave a technique where you input IP address and a screen is supposed to pop up with a "wireless" tab, then give access to another tab where you can view your pw.BTW, if I reset it entirely do I have to reset each of the computers now hooked up to it?
View 1 Replies View RelatedI have Comcast cable internet routed through a linksys E3000 router. My desktop is connected to my router via ethernet and my various other devices including my laptop are wifi connected. It seems almost at random that my desktop will lose its connection.Windows will show me as still being connected and my network connection will show a normal status until I atttempt to repair it then it will change to limited or no connectivity. Through all of this, my other devices all still have a wifi signal (I don't use more than 1 or 2 at the same time). I can reconnect to the internet by unplugging my ethernet cable then reuplugging it back in and my connection will start working again. I've also had several blue screens, and when I checked the dmp files it revealed my network card driver as the culprit, yet I have reinstalled and even clean installed the microsoft signed driver. I have also attempted to reboot both my modem and router to no avail.
Microsoft XP
Marvell Yukon ethernet adapter on a biostar mobo
C:Documents and SettingsMain>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : sn1
Primary Dns Suffix . . . . . . . :
[code]...
I have a Linksys WRT54G2 V1and I am trying to hook it up to my broadband modem after hooking up the connections it still does not recognize?
View 2 Replies View RelatedYesterday my wireless internet suddenly stopped working. I plugged the ethernet cable directly from the modem to the computer and everything was fine, so I reset the router, reconnected it to the modem, and went to the setup page 192.168.1.1. I reconfigured the router on the setup page, leaving all previous settings the same (except I renamed the network from linksys to our own name and reconfirmed the WPA Personal password). My computer can connect to the wireless network but I can't go online.
View 9 Replies View RelatedI have this router back in my home office for my wife's Mac laptop. I recently purchased a new Sony TV with internet access capability and was hoping to gain access through my router, however during set-up attempt it will not connect. My wife is able to use her laptop in the same area as the TV.
View 3 Replies View RelatedI have a WRT54G2 v1 (no new firmware available) with a cable-modem connection (Motorola Surfboard), every thing works perfect but when my ISP goes down and then back up I cannot get the router work, LAN or Wifi connection. I have ping response to the router and I'm also able to get into the admin page. The only way to recover is restarting the router and sometimes releasing DHCP and then Renewing it, and the Wan connection actually gets the same IP it had before.
View 3 Replies View Related