Wireless :: Upon Starting Computer It Crashes?
May 13, 2011uupon starting my computer a blue screen appears and it crashes, I shut the entire system down and restart in safe mode.
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: E2500 Crashes Windows Computer?
Feb 8, 2012DSL Modem>E4200>100' Cat6>SE2500>6' Cat6>Dell XPS 420 Windows 7 In this setup windows 7 crashes everytime about 2 mins If I go Cat6 to computer there is no issue at all The first 6' cable I used would only give a 10Mb connection The second 6' give 1Gb but still crashes everytime The E4200 has only to ports used one for the SE2500 and one for a Cisco SD2005 The SD2005 is connected to a Revue, Squeezebox, Sony BDP, and a Dish Network 722 I am also using WET610N to a trendnet 4port switch with a Dish 922 and a Sony BDP which I am tring to eliminate the WET610N by hard wiring everything. This is the purpose of the new ES2500.
View 1 Replies View RelatedLinksys Wireless Router :: SE2500 Crashes Windows 7 Dell XPS 420 Computer?
Oct 19, 2011DSL Modem>E4200>100' Cat6>SE2500>6' Cat6>Dell XPS 420 Windows 7 In this setup windows 7 crashes everytime about 2 mins If I go Cat6 to computer there is no issue at all The first 6' cable I used would only give a 10Mb connection The second 6' give 1Gb but still crashes everytime
The E4200 has only to ports used one for the SE2500 and one for a Cisco SD2005 The SD2005 is connected to a Revue, Squeezebox, Sony BDP, and a Dish Network 722 I am also using WET610N to a trendnet 4port switch with a Dish 922 and a Sony BDP which I am tring to eliminate the WET610N by hard wiring everything. This is the purpose of the new ES2500.
LAN Crashes When Computer Is Turned On / Wakes Up?
May 11, 2011If I have anything else connected to the network (anything being my Xbox 360, or my smartphone) and I turn on/wake up my computer, the entire network crashes and I have to power cycle the router and modem in order to get it to work again. What would even cause this? I often forget to turn off the wifi on my smartphone before I turn on the computer, which results in a lot of very tedious power cycling. It's also frustrating if I'm playing some vidya on the 360 and my wife gets on the computer, resulting in me getting kicked off and her unable to even do what she wanted to do in the first place.
The stranger part is that if I have my computer already on, and I turn on the 360/smartphone, it works fine. So there's something going wrong in the process of my computer connecting to the network, I guess. I have set a static IP, and I also made sure to turn off the energy saving feature of my wifi card, but neither of those things solved the problem.
Wmp54g Crashes Computer With E2000 Router?
Mar 6, 2011New Cisco E2000 (wireless N router) not compatible with WMP54G (2.4GHz) adapterCan't find new drivers. Crashes computer to blue screen. Can the two be made compatible? Windows XP Home and Pro (both computers have WMP54G and blue screen).
View 4 Replies View RelatedRouter Crashes When Specific Computer On Network Turns Off
Oct 25, 2012Essentially when my friends computer disconnects from the router, everyone elses computers cannot access the internet, even though windows says they are still connected.
View 1 Replies View RelatedWireless :: Broadcom 802.11b/g WLan Not Starting?
Jan 20, 2011device manager indicates it is disabled, but drivers are up-to-date
View 2 Replies View RelatedStarting Up A New Wireless Network With Hotspot?
Mar 6, 2011I want to set up a wireless network with hotspot for billing.I have a Cisco wireless n router.My System info is below:
OS Version: Microsoft Windows 7 Ultimate , 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2013 Mb
Graphics Card: Radeon X300/X550/X1050 Series Secondary (Microsoft Corporation - WDDM) , 3 Mb
Hard Drives: C: Total - 119899 MB, Free - 26762 MB; D: Total - 118415 MB, Free - 102992 MB; G: Total - 305242 MB, Free - 19123 MB;
Motherboard: Dell Inc., 0GM819, , ..CN1374086607G4.
Antivirus: avast! Antivirus, Updated and Enabled
Cisco Wireless :: 1142i Starting Up With WAP Bridge
Nov 28, 2012i'm new in wireless and have delegated a task to setup a wireless connection between two buildings (it should be on the same IP subnet), app. 300m apart. How to perform this task, what Cisco AP to use, antennas. I do have a WLC these APs will be connecting to. Currently have few extra 1142i AP - not sure if this can be used for bridging.
View 4 Replies View RelatedLinksys Wireless Router :: WRT160 N Not Starting / Stuck When Lights Comes On?
May 14, 2012I have a LinkSys WRT 160 N wireless router, the router just stopped starting abruptly, when i power cycle the router, all the 4 ethernet light come on, and that is where it gets stuck. I've tried using the reset button but there is no effect after i depress the button.
View 1 Replies View RelatedWireless Internet Randomly Crashes?
Aug 7, 2011I am currently picking up off a friends internet connection. Every day it seems to randomly kick off. I have tried a few troubleshoot fixes and none have worked. This has only happened with my friends connection before my wireless worked just fine. Is there a way to fix it from crashing?
View 15 Replies View RelatedCisco :: ISC 5.2 DB Not Starting
Jun 21, 2011I did the ISC 5.2 on Solaris restore successfully but when I want to start the DB by running STARTDB but it gives me this error.
View 0 Replies View RelatedWindows 7 PC Crashes On Wireless Router When Mac Connects
Nov 7, 2011I saw a thread from early 2010 which described the issue I am currently having to a T. I am on a Belkin Wireless G with Mimo router and it runs perfectly either on LAN or WLAN, until my new roommate's MacBook gets on there at the same time. As soon as the MAC connects, I get a blue screen of death and the PC restarts. I have been battling this issue for over a week now and have absolutely narrowed it down to the Mac/wireless area.
I have already uninstalled/reinstalled my wireless drivers and thought that had fixed the issue(it worked fine for 4 days), until the roommate returned from out of town and connected the Mac to the Wireless....then WAMMO, like clockwork, back came the BSoD. This seems like a very unique problem, as I have done many searches online and the one I mentioned on here is the only one I could find that accurately described my issue.
For reference, I have posted the link to the previous case below. Unfortunately, no solutions, other than reinstall drivers (which I have already done) are posted. I tried everything in that thread and my settings appear to all be the same as his. Is it possible this is just some rare Windows 7 glitch that has never been resolved?
[URL]
Sony Vaio Crashes When It Connects To Wireless
Jan 29, 2011i have a sony vaio VPC, with windows 7 home premium, just 3 weeks old. when it starts up and starts detecting the wireless, most of the time it crashes and goes to the blue screen. sometimes it tries to connect and cannot, and then when i hit connect it crashes, or it crashes when i hit repair. after 2 or 3 times of going to the blue screen, it connects to wireless and works. but if i restart it crashes again (or not). i don't know what to do! there is no authorized sony repair center in the country. i dont know what to do
View 6 Replies View RelatedWgr614 V6 Wireless Router Only Allows One Device Or It Crashes?
Feb 3, 2013I have a wgr614 V6 router, yes its old. I had 3 devices connected to it just fine before without any issues. But now It only allows my laptop, when I try to connect with my ipod touch or desktop, not only does it fail, the entire network crashes and my laptop loses it and its gone. It then takes about 2 minutes to come back up. So whenever I attempt to connect with another device the network crashes. so right now only my laptop is connected.I downloaded & updated to the newest firmware, did not work.I tried resetting the router, and made the network all over again, did NOT work.
View 7 Replies View RelatedD-Link DIR-615 :: Internet Crashes On Local And Wireless
Nov 10, 2012I have an dir-615 h2 with upgraded firmware to 8.03 instead of the default that was 8.02, now it crashes and i cant reach the router on cable or wireless. its dead and i have to restart it to work.. where can i find the h2 8.02 firmware.
View 7 Replies View RelatedPending - ICS On Service Can't Starting
Oct 2, 2011I had a problem with my laptop ICS.
1 Acer laptop with windows 7 home premium
1 MSI laptop with windows 7 ultimate
1 Hp Netbook with windows 7 starter
1 USB Broadband
First i had connect the USB Broadband using by acer laptop to make as wifi router/wifi host via ad hoc.MSI laptop and Hp Netbook was successfully connected and able to connected to the internet which share from Acer laptop.Second, after that i am trying to use MSI laptop to create as wifi router/wifi host just like the same way what i done with Acer laptop.My both Acer laptop and Hp Netbook successfully connect to MSI laptop but only the Acer laptop was unable to connect to internet and it was showing "No Internet access". and the "homegroup something it showing "Unidentified network" on the MSI laptop.I had tried to restart all the laptop and netbook to resetting it, unlucky it still unable to connecting to internet.Also i had set all to "Obtain an IP address automatically".And i found out that my laptop ICS on service didnt starting and on Firewall didnt have ICS on the list.When i try to click the start buttom it popping out this:"The Internet Connection Sharing (ICS) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"
Cisco :: LMS 3.2 Crmdmgtd Not Starting
Jul 13, 2011I have installed LMS 3.2 on win 2003 server. It was working fine for last 1 year. Due to some requirement we restarted teh server, after which the LMS services did not came up. Now if we are giving the command "net start crmdmgdt", it give the following error message.The service is not responding to the control function.While checking the application log in event viewer we are getting the error message " Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2"
If we are restarting the server then also similar kind of error message is appearing" Reporting queued error: Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2".
Cisco :: LMS 2.6 - CTMJrmServer Is Not Starting?
Jan 25, 2012Since last week, the login to CiscoWorks page comes up blank. The output of pdshow shows all the processes running except CTMJrmServer.
Process= CTMJrmServer
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 01/26/12 18:08:11
[code]....
The CTMJrmServer is not starting and the log shows:
[ Thu Jan 26 18:08:14 GMT 2012 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,242,ERROR: Could not establish connection with JRM.
These are production systems running LMS2.6 and the users are not able to login.
TP-Link ADSL2+ Wireless :: W8968 Crashes 2 To 3 Times A Day?
Jan 10, 2013Region : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Telefonica-Spain
'm having the same problem my tp-link freezes several times a day and only a hard reset will get it working again. I have no idea how to fix it, I have contacted tp-link support and they say to make sure I have all the right ADSL configuration parameters.
Linksys Wireless Router :: Firmware Ver.4.21.4 Crashes WRT54G V2
Sep 5, 2011In hopes of fixing some "flaky" connection issues with my WRT54G V2 Wireless Router, I downloaded and applied the new firmware version released on 08/18/2011, Ver.4.21.4 for my Version 2 Router. I downloaded, went through the application process using the router's firmware update process, it said it was successful and then the router restarted and didn't work. Couldn't ping the address, constant flashing Power light, no response at all from router. Tried again, same result. Performed hard reset, same result. Tried a few other recovery techniques found on the web with no success. Finally I did the process found here [URL] This reset the router and I re-uploaded this same 2011 version. Router still broken. I ran through the process again after downloading an older version of the firmware, specifically version V3.1_4.00.7, the upload ran, and the router worked again! This was proof to me that the newest version completely BRICKED my router. I'm so relieved I was able to reset the router and manually recover, but most will never try this. I recommend Cisco retest this ASAP and pull the new release for the V2 router until they get this resolved!
View 9 Replies View RelatedCisco Wireless :: WAP121 Host-pad Uses All CPU / Crashes Every 3.5 Days
Oct 8, 2012We have 4 WAP121s running 1.0.1.10. After a couple of days of operation, they all become unusably slow. The admin web interface takes several minutes to load, and wireless clients timeout before RADIUS authentication can complete. Waiting long enough allows the diag info to be downloaded, which shows hostapd using all of the CPU time available: [code]
As a workaround, we used to use a small script to reboot them every night via SSH, but someone at Cisco made a less-than-brilliant decision to remove this advertised feature.
Netlogon Service Not Starting - Moved From XP
Apr 13, 2011Actually I have a shared printer in network and when some user tries to access that printer of machine name \venus an error occurs netlogon service is not started.I have tried to start netlogon service on both machine (Printer server and client) but some machine in network can able to access that machine (\venus) but some machines gives error "NETLOGON service is not started"
View 14 Replies View RelatedDownloads Starting And Stopping Constantly?
Aug 6, 2012First, I'm running Windows7 64 bit. So whenever I download a decently sized file; my download will start and get good speed for a few minutes, then it will drop off and stop and my connection to the internet will be lost for a short time while the connection resets. This happens if I'm using a program like Steam to download a game, torrenting something, sometimes on my Xbox 360 when it needs to update itself or a game, occasionally on a large app or album off of iTunes or patching an online game. However, I have no issue watching YouTube videos or playing an online game while also having TeamSpeak running in the backround to chat. I don't lose connection when browsing the internet at all and recently I was able to stream a live event without issue but I only tried that once (I don't have Netflix or anything similar).It usally isn't a big issue because my download will pick up where it left off most of the time but its a pain in the butt to have to add on an extra hour to a download sometimes for this.
View 4 Replies View RelatedNetgear FVS318 Firewall - VPN Not Starting?
Jul 27, 2011I have Windows Server 2008 R2 set up to allow a vpn connection based on certificate verification. All traffic in my office get routed through a Netgear FVS318 Firewall in which I forwarded all the prerequisite ports to the Server. However, whenever I try to connect from outside the office Windows 7 reports that it either cannot establish a communication with the remote server or that the required Certificate is not installed. I verified the sslcert hash on the Server against the Certificate I installed at home and they match. I can ping both the dyndns and the IP of the office with no problems from home. Or does the firewall not allow vpn connections since it has the ability to host them itself.
View 2 Replies View RelatedLaptop Frozen On Starting Windows?
Jul 27, 2012laptop has frozen on "this programme cannot display the webpage". cannot access start menu, task manager or anything else. Can turn off with power button but when it comes back on it flashes on the desktop then reverts immediately to the "this programme ........." page again.
View 1 Replies View RelatedInternet Connection Does Not Work Right Away After Starting Up PC
Sep 14, 2012I do not remember exactly when this started but I think it was beginning of last week. Anyways, every time when I start up my computer and sign into my screen the internet connection does not seem to work right away. I thought first this was a problem with Google Chrome but then I tried other applications and it is the same thing. It takes about 30 seconds before I can get internet connection to do anything online even though down at the bottom right it says I am connected to the internet. The rest of the time I'm using the computer it's perfectly fine. It's only when I first start up the computer and sign into my screen. I don't know what's the problem so I'm hoping I can get an answer here from somebody.
View 2 Replies View RelatedWhole Modem Reboots When Starting Torrent?
Mar 25, 2012I recently upgraded to Docsis 3.0 Routers Homenetworking Modem.Speeds are more than I am paying for when using WirelessOnly problem is. When I start a torrent in Bitcomet my whole modem will "disconnect".Including all the computers connected via Ethernet Cable.I have had the modem exchanged, same thing.I am not using a Router. The modem has wifi which I use.The modem stays online it's just that is loses its internet connection, I have had a technician over to see for him self, he didn't know what to do, he tried swapping the modem. Same thing.
View 2 Replies View RelatedCisco VPN :: Starting Any Connect VPN Through RDP Session On 891
Nov 14, 2012I have Any Connect (ver 3.1.01065) configured on Cisco router 891. VPN is working fine from the desktop, but I also need the ability to establish a VPN connection through a RDP connection (i.e. I'm using RDP to connect to a PC which has AnyConnect installed on, then trying to establish a VPN connection). OS Windows 7 SP1 x86.I've read about changing some settings in profile file (changed the <WindowsVPNEstablishment> option to "AllowRemoteUsers". Then applied the profile to the relevant Group Policy. Connected VPN from the PC (not through RDP), so that it downloads the new profile, and then disconnected again.): url...
But this make sense to the cisco asa... I have a cisco router on the ios 15.1. I've checked the XML file on the local PC to confirm the profile has been downloaded and is has, and I can't see the AllowRemoteUsers option.So I still can't start VPN through an RDP connection. (Error is "VPN establishment capability from a remote desktop is disabled. A VPN connection will not be established".)This also happened with the previous version of AnyConnect (2.5.xxxx).The PC's local routing tables look fine, and I can't see any conflicts that would cause the RDP session to drop.In the main window of Cisco anyconnect secure mobility client Ive noticed label: Web Authentication required.
Cisco VPN :: IPSEC L2L VPN Starting From NATed IP?
Mar 22, 2012My cisco asa ar configured as show:
Cisco asa <outside int ip 192.168.1.2/30>----------------FIBER---------------------<192.168.1.1/30>Service provider------>internet
1-The network addressing between my cisco asa and the service provider is an private non routable ip addressing ( 192.168.1.0/30)
2-My lan pool are patted to 212.198.4x.xx to join the internet
3-The ip address used for pat is nat assigned to any physical interface
4-How can i configure a site to site vpn using the public ip address used for the pat.
Cisco :: LMS 4.0 Is Not Starting - Fresh Install
Oct 20, 2012I've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage
View 3 Replies View RelatedLinksys Wireless Router :: WRT54GL V1.1 Firmware 4.30.7 Crashes Browsers?
Aug 29, 2006I am attempting to setup a wireless access pointand want to deny access to a group of IP addresses. When I go to Wireless, MAC setup, Deny or Allow, and select "Edit MAC Address List" my browser crashes. I have tried this on two different Linux systems and three browsers, Firefox, Mozilla, and Seamonkey.Tech Support tells me to downgrade to Firmware version 4.30.2, the only compiled version available on the Linksys website, but with no way to go back to 4.30.5 if the problem isn't fixed or if worse problems come up I am reluctant to try this fix, The only other suggestion Tech Support offered was to replace my WRT54GL with a WRT54G.
View 3 Replies View RelatedLinksys Wireless Adapters :: WET610N Crashes And Restart After 10 Minutes?
Jan 30, 2010My WET610N crashes when I'm using it behind my PS3 while I'm watching videos in DLNA with the PS3 Media Server. Sometimes I can watch it during 1 hour without problem, somtimes it crashes and restart after 10 minutes of playing already. The restart is taking quite a long time, something like 2 or 3 minutes to get back to a Wifi connection. The router is still working properly while the WET610N is restarting.
The firmware is the latest 1.0.03, the settings are made for Video Access mode. I'm not using any encryption, only MAC address filtering.
My Wifi router is a Belkin N+ (F5D8235-4 v2000).