Internet Connection Does Not Work Right Away After Starting Up PC

Sep 14, 2012

I do not remember exactly when this started but I think it was beginning of last week. Anyways, every time when I start up my computer and sign into my screen the internet connection does not seem to work right away. I thought first this was a problem with Google Chrome but then I tried other applications and it is the same thing. It takes about 30 seconds before I can get internet connection to do anything online even though down at the bottom right it says I am connected to the internet. The rest of the time I'm using the computer it's perfectly fine. It's only when I first start up the computer and sign into my screen. I don't know what's the problem so I'm hoping I can get an answer here from somebody.

View 2 Replies


ADVERTISEMENT

Virtual PC Internet Connection No Longer Work?

Apr 15, 2011

I installed virtual pc 2007 that has winXP and my host is Windows vista. I was able to make my virtual pc to connect to host internet using NAT for adapter 1 long time ago without any problems but it is not working anymore since last month! Although it works when I try it on another host. I believe the problem is in my host so what to check excatly in my host.

View 1 Replies View Related

Internet Won't Work - Connection Bars Display Yellow Triangle With Exclamation Point

Jul 11, 2012

Just bought a new Cisco e1200 router last week. When i first hooked it up, it was giving me extremely low (significantly lower than my old router) downloading speeds. After switching the networking mode from "mixed' to "Wireless-G only", the speeds went back to normal. I tried "Wireless-N only", but it didn't work after that. Seemingly, my computer does not work with Wirless-N?

It's been running okay now, but 2 things happen occasionally: When playing a game, I experience lag for a period of 5 minutes, or sometimes 20 minutes. It goes away on its own. Never happened with my old router. When surfing the internet, pages will refuse to load. The connection bars shown at the bottom right hand corner of my computer display a yellow triangle with an exclamation point. This goes away on its own after about 4-5 minutes. These problems come randomly every 3-4 or days, maybe a bit longer.

View 4 Replies View Related

Cisco :: ISC 5.2 DB Not Starting

Jun 21, 2011

I did the ISC 5.2 on Solaris restore successfully but when I want to start the DB by running STARTDB but it gives me this error.

View 0 Replies View Related

Pending - ICS On Service Can't Starting

Oct 2, 2011

I had a problem with my laptop ICS.

1 Acer laptop with windows 7 home premium
1 MSI laptop with windows 7 ultimate
1 Hp Netbook with windows 7 starter
1 USB Broadband

First i had connect the USB Broadband using by acer laptop to make as wifi router/wifi host via ad hoc.MSI laptop and Hp Netbook was successfully connected and able to connected to the internet which share from Acer laptop.Second, after that i am trying to use MSI laptop to create as wifi router/wifi host just like the same way what i done with Acer laptop.My both Acer laptop and Hp Netbook successfully connect to MSI laptop but only the Acer laptop was unable to connect to internet and it was showing "No Internet access". and the "homegroup something it showing "Unidentified network" on the MSI laptop.I had tried to restart all the laptop and netbook to resetting it, unlucky it still unable to connecting to internet.Also i had set all to "Obtain an IP address automatically".And i found out that my laptop ICS on service didnt starting and on Firewall didnt have ICS on the list.When i try to click the start buttom it popping out this:"The Internet Connection Sharing (ICS) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"

View 4 Replies View Related

Cisco :: LMS 3.2 Crmdmgtd Not Starting

Jul 13, 2011

I have installed LMS 3.2 on win 2003 server. It was working fine for last 1 year. Due to some requirement we restarted teh server, after which the LMS services did not came up. Now if we are giving the command "net start crmdmgdt", it give the following error message.The service is not responding to the control function.While checking the application log in event viewer we are getting the error message " Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2"
 
If we are restarting the server then also similar kind of error message is appearing" Reporting queued error: Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2".

View 7 Replies View Related

Cisco :: LMS 2.6 - CTMJrmServer Is Not Starting?

Jan 25, 2012

Since last week, the login to CiscoWorks page comes up blank.  The output of pdshow shows all the processes running except CTMJrmServer.
 
Process= CTMJrmServer
State  = Administrator has shut down this server
Pid    = 0
RC     = 0
Signo  = 0
Start  = 01/26/12 18:08:11

[code]....
 
The CTMJrmServer is not starting and the log shows:

[ Thu Jan 26  18:08:14 GMT 2012 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,242,ERROR: Could not establish connection with JRM.
 
These are production systems running LMS2.6 and the users are not able to login.

View 0 Replies View Related

Wireless :: Broadcom 802.11b/g WLan Not Starting?

Jan 20, 2011

device manager indicates it is disabled, but drivers are up-to-date

View 2 Replies View Related

Wireless :: Upon Starting Computer It Crashes?

May 13, 2011

uupon starting my computer a blue screen appears and it crashes, I shut the entire system down and restart in safe mode.

View 1 Replies View Related

Starting Up A New Wireless Network With Hotspot?

Mar 6, 2011

I want to set up a wireless network with hotspot for billing.I have a Cisco wireless n router.My System info is below:

OS Version: Microsoft Windows 7 Ultimate , 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2013 Mb
Graphics Card: Radeon X300/X550/X1050 Series Secondary (Microsoft Corporation - WDDM) , 3 Mb
Hard Drives: C: Total - 119899 MB, Free - 26762 MB; D: Total - 118415 MB, Free - 102992 MB; G: Total - 305242 MB, Free - 19123 MB;
Motherboard: Dell Inc., 0GM819, , ..CN1374086607G4.
Antivirus: avast! Antivirus, Updated and Enabled

View 2 Replies View Related

Netlogon Service Not Starting - Moved From XP

Apr 13, 2011

Actually I have a shared printer in network and when some user tries to access that printer of machine name \venus an error occurs netlogon service is not started.I have tried to start netlogon service on both machine (Printer server and client) but some machine in network can able to access that machine (\venus) but some machines gives error "NETLOGON service is not started"

View 14 Replies View Related

Downloads Starting And Stopping Constantly?

Aug 6, 2012

First, I'm running Windows7 64 bit. So whenever I download a decently sized file; my download will start and get good speed for a few minutes, then it will drop off and stop and my connection to the internet will be lost for a short time while the connection resets. This happens if I'm using a program like Steam to download a game, torrenting something, sometimes on my Xbox 360 when it needs to update itself or a game, occasionally on a large app or album off of iTunes or patching an online game. However, I have no issue watching YouTube videos or playing an online game while also having TeamSpeak running in the backround to chat. I don't lose connection when browsing the internet at all and recently I was able to stream a live event without issue but I only tried that once (I don't have Netflix or anything similar).It usally isn't a big issue because my download will pick up where it left off most of the time but its a pain in the butt to have to add on an extra hour to a download sometimes for this.

View 4 Replies View Related

Netgear FVS318 Firewall - VPN Not Starting?

Jul 27, 2011

I have Windows Server 2008 R2 set up to allow a vpn connection based on certificate verification. All traffic in my office get routed through a Netgear FVS318 Firewall in which I forwarded all the prerequisite ports to the Server. However, whenever I try to connect from outside the office Windows 7 reports that it either cannot establish a communication with the remote server or that the required Certificate is not installed. I verified the sslcert hash on the Server against the Certificate I installed at home and they match. I can ping both the dyndns and the IP of the office with no problems from home. Or does the firewall not allow vpn connections since it has the ability to host them itself.

View 2 Replies View Related

Laptop Frozen On Starting Windows?

Jul 27, 2012

laptop has frozen on "this programme cannot display the webpage". cannot access start menu, task manager or anything else. Can turn off with power button but when it comes back on it flashes on the desktop then reverts immediately to the "this programme ........." page again.

View 1 Replies View Related

Whole Modem Reboots When Starting Torrent?

Mar 25, 2012

I recently upgraded to Docsis 3.0 Routers Homenetworking Modem.Speeds are more than I am paying for when using WirelessOnly problem is. When I start a torrent in Bitcomet my whole modem will "disconnect".Including all the computers connected via Ethernet Cable.I have had the modem exchanged, same thing.I am not using a Router. The modem has wifi which I use.The modem stays online it's just that is loses its internet connection, I have had a technician over to see for him self, he didn't know what to do, he tried swapping the modem. Same thing.

View 2 Replies View Related

Cisco VPN :: Starting Any Connect VPN Through RDP Session On 891

Nov 14, 2012

I have Any Connect (ver 3.1.01065) configured on Cisco router 891. VPN is working fine from the desktop, but I also need the ability to establish a VPN connection through a RDP connection (i.e. I'm using RDP to connect to a PC which has AnyConnect installed on, then trying to establish a VPN connection). OS Windows 7 SP1 x86.I've read about changing some settings in profile file (changed the <WindowsVPNEstablishment> option to "AllowRemoteUsers". Then applied the profile to the relevant Group Policy. Connected VPN from the PC (not through RDP), so that it downloads the new profile, and then disconnected again.): url...
 
But this make sense to the cisco asa... I have a cisco router on the ios 15.1. I've checked the XML file on the local PC to confirm the profile has been downloaded and is has, and I can't see the AllowRemoteUsers option.So I still can't start VPN through an RDP connection. (Error is "VPN establishment capability from a remote desktop is disabled. A VPN connection will not be established".)This also happened with the previous version of AnyConnect (2.5.xxxx).The PC's local routing tables look fine, and I can't see any conflicts that would cause the RDP session to drop.In the main window of Cisco anyconnect secure mobility client Ive noticed label: Web Authentication required.

View 1 Replies View Related

Cisco VPN :: IPSEC L2L VPN Starting From NATed IP?

Mar 22, 2012

My cisco asa ar configured as show:
 
Cisco asa <outside int ip 192.168.1.2/30>----------------FIBER---------------------<192.168.1.1/30>Service provider------>internet
 
1-The network addressing between my cisco asa and the service provider is an private non routable ip addressing ( 192.168.1.0/30)

2-My lan pool are patted to 212.198.4x.xx to join the internet

3-The ip address used for pat is nat assigned to any physical interface
  
4-How can i configure a site to site vpn using  the public ip address used for the pat.

View 2 Replies View Related

Cisco :: LMS 4.0 Is Not Starting - Fresh Install

Oct 20, 2012

I've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage 

View 3 Replies View Related

Dell :: Wi-Fi Card Not Starting Atheros AR5007EG

Nov 30, 2012

I am having long withstanding problem that I couldn't resolved till date. I am using My DELL VOSTRO A860 for more than 3 years.

My Wifi is not starting for any reason, I've installed the driver from your CD, manually downloaded from atheros site and I did all I could do to resolve the problem, but still the problem persists.

All other things are fine but still I am not able to use my wifi.

View 16 Replies View Related

Cisco Wireless :: 1142i Starting Up With WAP Bridge

Nov 28, 2012

i'm new in wireless and have delegated a task to setup a wireless connection between two buildings (it should be on the same IP subnet), app. 300m apart. How to perform this task, what Cisco AP to use, antennas. I do have a WLC these APs will be connecting to. Currently have few extra 1142i AP - not sure if this can be used for bridging.

View 4 Replies View Related

Cisco Firewall :: Starting ASA 5515-x Configuration

Apr 14, 2013

I'm starting my configuration and i created a test environment side by side with my production.  i just run startup config and connected my ad-test.com AD host to it. i can ping ad-test.com from console, ok.  but it can't get internet from inside environment
 
here's the config..............................
 
: Saved
: Written by enable_15 at 07:56:40.638 UTC Mon Apr 15 2013
!
ASA Version 8.6(1)2

[Code].....

View 8 Replies View Related

Linksys Router - Stops Working When A Wired PC Is Starting?

Mar 14, 2012

I have the same problems with the Cisco EPC3925?Everytime a wired pc reboots/boots everyone on the network losses internet, also wireless is disconnected. Also everyone get unidentified network and later its set to public network.We are using a Sitecom switch LN-120. I have to unplug this switch, then restart the router to fix the problem each time. Then I can plug it in again and everything is fine.The router will not restart (does not go further then 2nd blinking LED.) if I do not unplug the switch.

View 8 Replies View Related

DHCP Server Service - Error 1075 - Not Starting

Oct 8, 2011

I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work. Points to note: 1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)

I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.

View 3 Replies View Related

Dell Inspiron 1521 Network Adapter Not Starting

Oct 26, 2011

Dell Inspiron 1521 w/Vista Home Premium, wlan dell 1390. Adapter does not start at any time if I don't remove battery for a long period, or a shorter period if I depress the on/off button for 15-20 seconds. Works fine if it starts, but when it does not start it does not appear in Device Manager. If I close the lid (sleep) for even a split second the wifi will not come back on because the adapter is not active. The computer does not wake from sleep normally either, but that's been going on from the beginning and the wlan adapter is a new issue (in a long line of issues with this laptop.)

View 4 Replies View Related

Kodak ESP C310 Printer Spooler Not Starting - Error 1068?

Jan 16, 2012

I have had same printer installed previously and tried to install new printer Kodak ESP C310, and now my pc states print spooler not running, went to admin tools, found print spooler, clicked on start and I get error 1068.

View 1 Replies View Related

Cisco :: Setup Translation Rule That Takes Any Three Numbers Starting With 4

Jan 3, 2012

I am trying to setup a translation rule that takes any three numbers that start with a 4.. and translate it to 14.. I have tried a few ways of what I thought would work but nothing is working.

Examples of what I have tried:

rule 2 /(...)/ /1.../
rule 2 /4../ /1.../
rule 2 /4../ /11/

This is the rule that I use to delete the 1 when traffic flows out of my voip system.

rule 1 /^1(...$)/ /1/

View 2 Replies View Related

Linksys Wireless Router :: WRT160 N Not Starting / Stuck When Lights Comes On?

May 14, 2012

I have a LinkSys WRT 160 N wireless router, the router just stopped starting abruptly, when i power cycle the router, all the 4 ethernet light come on, and that is where it gets stuck. I've tried using the reset button but there is no effect after i depress the button.

View 1 Replies View Related

Cisco Switching/Routing :: 2955 Switch Not Starting After IOS Upgrade?

Jan 21, 2013

I have installed Cisco 2955 Switch which already have x.x.x.x EA12 IOS and I copied x.x.x.x.EA13 into the flash: with intention to have EA13 enabled for IOS. I set the Global config for boot system by 'boot system (no falsh)x.x.EA13;x.x.EA12' but then also no luck and was showing EA12 in 'sh ver'. I then deleted the EA12 IOS and set the 'boot system flash:x.x.EA13'. I also had varified IOS EA13 by 'verify flash:IOS Filename', it verified the IOS.
 
But when I reloaded my switch, I'm unable to login and its in 'switch:' prompt (ROMmon mode - I believe). I then tried for flash_init, load_helper, dir flash: (showing me EA13 there) and finally boot flash:IOS Image file but no good news here... Output like this
 
Error loading "flash:IOS Image File EA13" Interrupt within 5 seconds to abort boot process. Error loading "flash:c2950-i6q4l2-mz.121-12c.EA1.bin"Interrupt within 5 seconds to abort boot process.

My guessing is that the IOS is corrupted (but its not showing me Error loading Image blabla...) I'm trying with EA14 of 4MB and I have 3 MB free spare and decided to remove EA13 first then through XModem try to upload EA14.
 
Any useful way and recommend me deleting EA13 and upgrading EA14... Also option to set boot image with having two IOS at the same time for permanent use.

View 5 Replies View Related

Cisco AAA/Identity/Nac :: CSlog Service Not Starting On ACS 4.2 Running On Windows 2003?

Jul 5, 2010

I just upgraded my ACS v4.0 to the latest available version v4.2(1) build 15 patch 2 and I've got some trouble with the CSLog service. I performed a successive upgrade first to v4.2 then to v4.2.1 and finally applied the two patches. Everything is working fine, I'm using both radius and tacacs services and they doing great like they were in v4.0. The only problem I have is with Cslog service which doesn't start. To be accurate, it starts but stops just after. I've uploaded some logs from cslog.log in cslog/logs directory.

View 6 Replies View Related

Cisco :: WLC 2106 WPA2 Enterprise Using Free Radius Starting Point

Mar 2, 2013

I have a WLC 2106 with two AP's connected, But have not set up any authentication. I don't have CSACS at my disposal, so I thought I would try FreeRadius on my Linux Server. I am looking for User/Password auth, and for now I would expect to have those accounts local to the FreeRadius engine. (baby steps before I try PAM/LDAP/AD/Certs )
 
I have seen a number of posts asking final step questions. I was looking for more of a where to begin How To.
 
I have read the docs on Free Radius, and believe I have the method worked out on how to make a small change, run in debug mod to observe my change, to verify that I don't spend too much time pulling out my hair. I am fairly adept at CSACS 5.3 but it hides the magic of Radius from me.

View 4 Replies View Related

Cisco Switching/Routing :: 3560Gs / 4900Ms / Starting SSH Session From Console Port?

Dec 29, 2011

I console into switch 1 (or router, it doesn't matter) and everything is fine.  From that session I SSH to switch 2 (or router).  The session on the second device has a noticable delay when I type.Next I SSH to switch 1, then SSH to switch 2 from that session.  Everything works fine.Finally, I console to switch 1, and telnet to switch 2.  There is no delay.So it appears the delay only occurs when I open an SSH session while consoled into a device.  It didn't matter what switch 1 and switch 2 were - I had 3560Gs, 4900Ms and a 3845 router.  There's no special configuration on the console or vty ports - when I do a "show line console" and "show line vty 0" the output is basically the same.

View 2 Replies View Related

Dell :: 3520 DHCP Client Not Starting With System Error 5 Access Denied Message

Feb 7, 2013

I have Dell Inspiron 15 3520 laptop bought in December 2012 with Windows 8 Pro. It was working fine until two days ago. I am unable to obtain DHCP lease either through wireless or wired network. After troubleshooting, I found DHCP service is not running and try to restart but of no avail.I ran sfc /scannow and the results are OK.

View 2 Replies View Related

Two Home Routers To Access Internet From Work / Internet Cafes

Feb 22, 2012

I have a laptop that I take to work, and would like to set things up to use my home internet connection from elsewhere. I don't have another computer to function as a server for me at home, so would like to do it so that my router alone provides this access (log into it from the internet anywhere and use my internet as if I am using it from home). How would I go about doing this? Would it require installing new firmware?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved