Wireless :: Broadcom 802.11b/g WLan Not Starting?
Jan 20, 2011device manager indicates it is disabled, but drivers are up-to-date
View 2 Replies
ADVERTISEMENT
Cisco Wireless :: Setup A 2504 To Have One Guest WLAN And One Staff WLAN?
Jun 10, 2013I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.
Wireless :: Upon Starting Computer It Crashes?
May 13, 2011uupon starting my computer a blue screen appears and it crashes, I shut the entire system down and restart in safe mode.
View 1 Replies View RelatedStarting Up A New Wireless Network With Hotspot?
Mar 6, 2011I want to set up a wireless network with hotspot for billing.I have a Cisco wireless n router.My System info is below:
OS Version: Microsoft Windows 7 Ultimate , 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2013 Mb
Graphics Card: Radeon X300/X550/X1050 Series Secondary (Microsoft Corporation - WDDM) , 3 Mb
Hard Drives: C: Total - 119899 MB, Free - 26762 MB; D: Total - 118415 MB, Free - 102992 MB; G: Total - 305242 MB, Free - 19123 MB;
Motherboard: Dell Inc., 0GM819, , ..CN1374086607G4.
Antivirus: avast! Antivirus, Updated and Enabled
Cisco Wireless :: 1142i Starting Up With WAP Bridge
Nov 28, 2012i'm new in wireless and have delegated a task to setup a wireless connection between two buildings (it should be on the same IP subnet), app. 300m apart. How to perform this task, what Cisco AP to use, antennas. I do have a WLC these APs will be connecting to. Currently have few extra 1142i AP - not sure if this can be used for bridging.
View 4 Replies View RelatedNo Adapters Listed Under Broadcom Wireless?
Dec 16, 2011Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Turion(tm) 64 Mobile Technology ML-40, x86 Family 15 Model 36 Stepping 2
Processor Count: 1
RAM: 958 Mb
Graphics Card: ATI RADEON XPRESS 200M Series, 64 Mb
Hard Drives: C: Total - 69303 MB, Free - 39138 MB; D: Total - 6991 MB, Free - 3631 MB;
Motherboard: Gateway,
Antivirus: Trend Micro Titanium Internet Security, Updated: Yes, On-Demand Scanner: Enabled
My wireless stopped working. I had problems in the past, not sure how I got to work then. But the other day after handling the modem/router-combo, I guess it became unplugged. I plugged it back in and have not had wireless since. I turned off computer, restarted. My wireless network is not even listed. I can connect vie ethernet. No adapter is listed under Broadcom Wireless.
Broadcom 802.11 B/g Wireless Networks Not Found?
Jan 10, 2012I have a compaq presario V5000 with Broadcom 802.11b/g WLAN installed. I recently tried to set up Wireless connection and "No Wireless Networks are available". My roommate has no problem connecting to the Wireless Network so I don't think its a problem with the router/modem. Also, I am unable to detect ANY networks (neighbors etc.).I have installed most recent driver (Driver 5.60.350.6)
View 8 Replies View RelatedLinksys Wireless Router :: WRT160 N Not Starting / Stuck When Lights Comes On?
May 14, 2012I have a LinkSys WRT 160 N wireless router, the router just stopped starting abruptly, when i power cycle the router, all the 4 ethernet light come on, and that is where it gets stuck. I've tried using the reset button but there is no effect after i depress the button.
View 1 Replies View RelatedWireless :: Broadcom 802.11n Fails To Pick Up Internet Signals?
Apr 6, 2011My laptop will work on a wired connction just fine, however it fails to pick up wireless internet signals. It will either not find the signal, or not connect to it unless I have my laptop wired with an ethernet cable. My network adapter is a Broadcom 802.11n. I have tried updating the driver, and multiple different routers/connections.(Yes the adapter is enabled to search for connections, it just doesnt find them unless I have it wired)
View 1 Replies View RelatedWireless :: Broadcom Nic Power Saving Mode Settings?
Jan 27, 2011What do the broadcom power saving mode settings mean? If power saving mode is enabled, what is the time it takes to go into power saving mode? What does fast mean?
View 1 Replies View RelatedBroadcom Driver / Wireless Disconnects When Watching Video
Aug 18, 2011I have my wireless connection set up and everytime I open a video file, my wireless connection disconnects and then re-connects after 30 odd seconds. It also happens when trying to stream video through Veetle or Sopcast. I have spent hours on google trying to find the solution to this and can't find anything. I have tried switching my firewall off, changing tons of settings of my wireless connection. I also updated my Broadcom wireless driver to the most recent one.
View 3 Replies View RelatedThe Broadcom Wireless LAN Adapter Shows Media Disconnected
Aug 22, 2011I'm trying to create an Ad-hoc network for use with my Android phone, however the phone does not discover the network.I've browsed various forums and tried a few things, but with no success.My laptop is able to detect other wireless networks. Wired Ethernet connection works fine.ipconfig /all results are below. The broadcom wireless LAN adapter shows Media Disconnected.I'm running Norton Internet Security and HP Wireless Assistant.
View 1 Replies View RelatedDell :: Latitude E6530 Broadcom And Wireless Connectivity
Jun 29, 2013So I bought Dell Latitude E6530. I noticed they were a lot of things missing, since I went to see in the Device Manager. After fixing so many, I have ended up with these. When I connect my laptop through A wire cable, it does connect but when I slide the wireless switch, it enables the Bluetooth but not the wireless, I have enabled Wireless in BIOS and yet nothing.
View 4 Replies View RelatedBroadcom 590x 10 / 100 Wireless Not Working On Acer Aspire 5315
Jan 25, 2012We have an Acer Aspire 5315 running a Broadcom 590x 10/100 Wireless card.The card was working wirelessly & with a direct connection. We upgraded the Hard Drive and the system now has Windows Vista on it.The computer will connect to the network via cable but it will no longer connect wirelessly.
View 5 Replies View RelatedCisco Wireless :: Roaming With Broadcom Thin Client On 5508
Jun 3, 2013Since two months they work full time with the new Dutch Electronic Patient Dossier.We installed 3 Cisco 5508 controllers, version 7.0.230.0 last year on a HP-switched network on a layer 2 mobility domain.Cisco 1041 AP are
The personnel works woth thin clients url... The one with the double antenna.This client has a Broadcom BCM943228HM4L 802.11 a.b.g.n (2x2) adapter.
On the client they have a connected RDP session to a server with the documents.Now they are walking from one patient to another patient. The problem they experience is a very late roaming. At the beginning of the corridor, the client will associate, but is going to roam at the end of the corridor. We installed 4 AP's on each corridor, so they signal is very well, maybe to well?
I disabled client loadbalancing and band select.The lowest data rates are also disabled. Mandatory begins at 12 Mbps. I can increase this to 18 Mbps.These clients work with PSK, with both methods (WPA-TKIP and WPA2-AES) enabled.We did this because of many old and new clients.
The customer tried to find out the problem with a smartphone, same issue. Very late roaming.I can upgrade the WLC to 7.0.240.0. The only problem I have is the WCS. When upgrading to 7.2 and higher I need to have NCS.
Linksys Wireless Router :: E1500 What Is Best Notebook Card To Replace Broadcom
Jul 13, 2012I own an HP Pavilion dv6 Notebook PC and recently purchased a Cisco E1500 to replace my aging WRTG54 wireless router. Since installation of the new router I keep getting dropped from my LAN and the internet with "connectivity issues" ... this only occurs on my notebook PC and not the other wireless devices I have in my home. I’ve done some searching on the internet and this seems to be a generic problem with the Broadcom 802.11b/g/n card the notebook uses. I have 2 questions:
1) Is there an easy way to adjust either the card or the router to deal with these issues and if not then
2) what is the best notebook card to replace the Broadcom with to assure these issues go away.
Dell :: Getting Connection With Broadcom BCM43222 Dual Band N Wireless Card In D600n?
Aug 4, 2012My wifes Dell D600n with with Intel 2200BG wireless G card was Extremely difficult to get access to internet at first @ 54Mbps, but achieved it after 3 weeks of trying, after I had replaced motherboard, to fix battery charging issue.
The current problem, that i cannot seem to surmount is: I replaced the wireless card with a newer Broadcom BCM43222, Dual band N wireless card, that should be capable of connecting at almost 6 times the speed of the older G card. Unfortunately, the new card seems unable to connect at all.
ADDITIONAL INFORMATION: The wireless switch via keyboard Fn & F2, has been on the entire time. I've tried a couple of different drivers, to no avail. Ive uninstalled/ reinstalled both the card and drivers several times, still no connection. The device manager reports the card is off, at all times, and i cannot find any way to alter this, but, despite the fact that this sounds like it could definitely cause no connection, this is unlikely to be the reason, because it has reported that the wireless card is off at all times since the new Motherboard was installed, and the Wireless G card worked perfectly for the past 2 months, and still does, while the device manager was all the while reporting it was off.
Also the wired broadband connection, via cat 5, had never worked after changing MOBO, Nor did the Dial up modem, til both modem and Ethernet came to life, last night after reinstalling drivers for both the modem and Ethernet. unfortunately doing the same thing for wireless had no effect. All this time the Intel wireless G card has, and still does work perfectly every time i remove the Broadcom Wireless N card and plug the G card back in. Until lastnight, The device manager reported the wireless card had no driver installed. now it recognizes the driver is installed but still cannot connect wirelessly One wireless card driver I tried was called: BROADCOM_ABGN_DD-WRT.zip. I lost track of the name of the other driver that i've been trying. Someone on another forum said after installing BROADCOM_ABGN... That one must go to device manager advanced properties and select US from choices of US, Japan, or Germany, To get this driver to work. I've tried this too. Again, No improvement.
Ive built my own computers for the past 30 years, and repair them all the time, for hardware problems, but I fear software is not my forte. My son, who is better at software. Usually, together, we can solve any mechanical electronic or software malfunction, but we're both stumped by this one. Admittedly, we all sometimes overlook a simple solution while seeking a very difficult one. Whenever I face a difficult malfunction like this, I think of when as a 5 year old I was privileged to accompany my Engineer big brother to a local Airport to repair what i would later learn was a Automatic Direction Finder System, needed before flight. As I sat beside my on the tarmac, watching him sweat bullets trying to effect a quick fix, I noticed something that looked out of place to me, and started chanting his name, Ronnie, Ronnie, Ronnie... ad infinitum, as kids are like to do, til in desperation he finally dropped his screwdriver withwhich he aws about to dismantle the entire mechanism, and fairly yelled what?, to which I asked timidly, Ronnie are all those lightbulb things (electron tubes) supposed to be lit. he said of course!, and continued working, ignoring me for another hour. Finally when he stopped to scratch his head, I said "If they're all supposed to be lit why is one of them not lit? he insisted they all were, but was adamant that they weren't. when he asked which one, and i pointed to it. He tested it verifying the filament was, indeed, open, and demanded to know why id watched for 4 hours and hadn't said that before.
Dell :: Latitude D600 Wireless - Broadcom 570x Gigabit Integrated Controller
Oct 13, 2012I recently got a Dell Latitude D600. I know, it's outdated. I'm running Windows XP SP3.
My problem is that after installing all of the drivers for the Broadcom 570x Gigabit Intergrated Controller, I can't get the wireless to pop up in the bottom right hand corner. I can only connect with an Ethernet cable directly from my router. I have tried many things, even support packages, but I can't seem to get it to work. I've also tried Fn+F2. Also, in the Device Manager I see a "Network Controller" but it has a question mark that is yellow beside it, and I can't seem to install it.
Cabling / Cards :: Broadcom NeXtreme Gigabit Ethernet Card Won't Make Wireless Connection From HP Desktop?
Oct 13, 2012Have just acquired new used HP desktop running Windows Vista. System has a Broadcom NeXtreme Gigabit Ethernet card installed, which gets me to the internet OK when using a LAN cable from wireless router. But I can't make wireless connection. Vista tells me that I need a wireless network adapter.Am I missing something? Is it possible to change some settings to get the Broadcom card to go wireless? If not, what sort of adapter is needed, and is such adapter external or will it have to be installed in the system box?
View 3 Replies View RelatedCisco :: ISC 5.2 DB Not Starting
Jun 21, 2011I did the ISC 5.2 on Solaris restore successfully but when I want to start the DB by running STARTDB but it gives me this error.
View 0 Replies View RelatedPending - ICS On Service Can't Starting
Oct 2, 2011I had a problem with my laptop ICS.
1 Acer laptop with windows 7 home premium
1 MSI laptop with windows 7 ultimate
1 Hp Netbook with windows 7 starter
1 USB Broadband
First i had connect the USB Broadband using by acer laptop to make as wifi router/wifi host via ad hoc.MSI laptop and Hp Netbook was successfully connected and able to connected to the internet which share from Acer laptop.Second, after that i am trying to use MSI laptop to create as wifi router/wifi host just like the same way what i done with Acer laptop.My both Acer laptop and Hp Netbook successfully connect to MSI laptop but only the Acer laptop was unable to connect to internet and it was showing "No Internet access". and the "homegroup something it showing "Unidentified network" on the MSI laptop.I had tried to restart all the laptop and netbook to resetting it, unlucky it still unable to connecting to internet.Also i had set all to "Obtain an IP address automatically".And i found out that my laptop ICS on service didnt starting and on Firewall didnt have ICS on the list.When i try to click the start buttom it popping out this:"The Internet Connection Sharing (ICS) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"
Cisco :: LMS 3.2 Crmdmgtd Not Starting
Jul 13, 2011I have installed LMS 3.2 on win 2003 server. It was working fine for last 1 year. Due to some requirement we restarted teh server, after which the LMS services did not came up. Now if we are giving the command "net start crmdmgdt", it give the following error message.The service is not responding to the control function.While checking the application log in event viewer we are getting the error message " Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2"
If we are restarting the server then also similar kind of error message is appearing" Reporting queued error: Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2".
Cisco :: LMS 2.6 - CTMJrmServer Is Not Starting?
Jan 25, 2012Since last week, the login to CiscoWorks page comes up blank. The output of pdshow shows all the processes running except CTMJrmServer.
Process= CTMJrmServer
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 01/26/12 18:08:11
[code]....
The CTMJrmServer is not starting and the log shows:
[ Thu Jan 26 18:08:14 GMT 2012 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,242,ERROR: Could not establish connection with JRM.
These are production systems running LMS2.6 and the users are not able to login.
Netlogon Service Not Starting - Moved From XP
Apr 13, 2011Actually I have a shared printer in network and when some user tries to access that printer of machine name \venus an error occurs netlogon service is not started.I have tried to start netlogon service on both machine (Printer server and client) but some machine in network can able to access that machine (\venus) but some machines gives error "NETLOGON service is not started"
View 14 Replies View RelatedDownloads Starting And Stopping Constantly?
Aug 6, 2012First, I'm running Windows7 64 bit. So whenever I download a decently sized file; my download will start and get good speed for a few minutes, then it will drop off and stop and my connection to the internet will be lost for a short time while the connection resets. This happens if I'm using a program like Steam to download a game, torrenting something, sometimes on my Xbox 360 when it needs to update itself or a game, occasionally on a large app or album off of iTunes or patching an online game. However, I have no issue watching YouTube videos or playing an online game while also having TeamSpeak running in the backround to chat. I don't lose connection when browsing the internet at all and recently I was able to stream a live event without issue but I only tried that once (I don't have Netflix or anything similar).It usally isn't a big issue because my download will pick up where it left off most of the time but its a pain in the butt to have to add on an extra hour to a download sometimes for this.
View 4 Replies View RelatedNetgear FVS318 Firewall - VPN Not Starting?
Jul 27, 2011I have Windows Server 2008 R2 set up to allow a vpn connection based on certificate verification. All traffic in my office get routed through a Netgear FVS318 Firewall in which I forwarded all the prerequisite ports to the Server. However, whenever I try to connect from outside the office Windows 7 reports that it either cannot establish a communication with the remote server or that the required Certificate is not installed. I verified the sslcert hash on the Server against the Certificate I installed at home and they match. I can ping both the dyndns and the IP of the office with no problems from home. Or does the firewall not allow vpn connections since it has the ability to host them itself.
View 2 Replies View RelatedLaptop Frozen On Starting Windows?
Jul 27, 2012laptop has frozen on "this programme cannot display the webpage". cannot access start menu, task manager or anything else. Can turn off with power button but when it comes back on it flashes on the desktop then reverts immediately to the "this programme ........." page again.
View 1 Replies View RelatedInternet Connection Does Not Work Right Away After Starting Up PC
Sep 14, 2012I do not remember exactly when this started but I think it was beginning of last week. Anyways, every time when I start up my computer and sign into my screen the internet connection does not seem to work right away. I thought first this was a problem with Google Chrome but then I tried other applications and it is the same thing. It takes about 30 seconds before I can get internet connection to do anything online even though down at the bottom right it says I am connected to the internet. The rest of the time I'm using the computer it's perfectly fine. It's only when I first start up the computer and sign into my screen. I don't know what's the problem so I'm hoping I can get an answer here from somebody.
View 2 Replies View RelatedWhole Modem Reboots When Starting Torrent?
Mar 25, 2012I recently upgraded to Docsis 3.0 Routers Homenetworking Modem.Speeds are more than I am paying for when using WirelessOnly problem is. When I start a torrent in Bitcomet my whole modem will "disconnect".Including all the computers connected via Ethernet Cable.I have had the modem exchanged, same thing.I am not using a Router. The modem has wifi which I use.The modem stays online it's just that is loses its internet connection, I have had a technician over to see for him self, he didn't know what to do, he tried swapping the modem. Same thing.
View 2 Replies View RelatedCisco VPN :: Starting Any Connect VPN Through RDP Session On 891
Nov 14, 2012I have Any Connect (ver 3.1.01065) configured on Cisco router 891. VPN is working fine from the desktop, but I also need the ability to establish a VPN connection through a RDP connection (i.e. I'm using RDP to connect to a PC which has AnyConnect installed on, then trying to establish a VPN connection). OS Windows 7 SP1 x86.I've read about changing some settings in profile file (changed the <WindowsVPNEstablishment> option to "AllowRemoteUsers". Then applied the profile to the relevant Group Policy. Connected VPN from the PC (not through RDP), so that it downloads the new profile, and then disconnected again.): url...
But this make sense to the cisco asa... I have a cisco router on the ios 15.1. I've checked the XML file on the local PC to confirm the profile has been downloaded and is has, and I can't see the AllowRemoteUsers option.So I still can't start VPN through an RDP connection. (Error is "VPN establishment capability from a remote desktop is disabled. A VPN connection will not be established".)This also happened with the previous version of AnyConnect (2.5.xxxx).The PC's local routing tables look fine, and I can't see any conflicts that would cause the RDP session to drop.In the main window of Cisco anyconnect secure mobility client Ive noticed label: Web Authentication required.
Cisco VPN :: IPSEC L2L VPN Starting From NATed IP?
Mar 22, 2012My cisco asa ar configured as show:
Cisco asa <outside int ip 192.168.1.2/30>----------------FIBER---------------------<192.168.1.1/30>Service provider------>internet
1-The network addressing between my cisco asa and the service provider is an private non routable ip addressing ( 192.168.1.0/30)
2-My lan pool are patted to 212.198.4x.xx to join the internet
3-The ip address used for pat is nat assigned to any physical interface
4-How can i configure a site to site vpn using the public ip address used for the pat.
Cisco :: LMS 4.0 Is Not Starting - Fresh Install
Oct 20, 2012I've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage
View 3 Replies View RelatedDell :: Wi-Fi Card Not Starting Atheros AR5007EG
Nov 30, 2012I am having long withstanding problem that I couldn't resolved till date. I am using My DELL VOSTRO A860 for more than 3 years.
My Wifi is not starting for any reason, I've installed the driver from your CD, manually downloaded from atheros site and I did all I could do to resolve the problem, but still the problem persists.
All other things are fine but still I am not able to use my wifi.