Whole Modem Reboots When Starting Torrent?
Mar 25, 2012
I recently upgraded to Docsis 3.0 Routers Homenetworking Modem.Speeds are more than I am paying for when using WirelessOnly problem is. When I start a torrent in Bitcomet my whole modem will "disconnect".Including all the computers connected via Ethernet Cable.I have had the modem exchanged, same thing.I am not using a Router. The modem has wifi which I use.The modem stays online it's just that is loses its internet connection, I have had a technician over to see for him self, he didn't know what to do, he tried swapping the modem. Same thing.
View 2 Replies
ADVERTISEMENT
Apr 9, 2012
i am using torrent software in my laptop for downloading, this affecting my modem and drops connection.
View 2 Replies
View Related
Dec 28, 2012
Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631v1_0.6.0_1.0_up(121214)
ISP : TPG
I've noticed the modem becomes unresponsive under use with torrents and only thing that works is to turn it off & on from power button then works for a few more minutes then crashes again on the latest firmware.
View 8 Replies
View Related
Dec 27, 2012
Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : TD-VG3631v1_0.6.0_1.0_up(121214)
ISP : TPG
I've noticed the modem becomes unresponsive under use with torrents and only thing that works is to turn it off & on from power button then works for a few more minutes then crashes again on the latest firmware.
View 1 Replies
View Related
Feb 5, 2012
if I am XP and online, if I restart into Win7, I have to power cycle my modem before I can go online. If I then restart any number of times into Win7, there is no connections problem. If I then restart into XP, then I have to power cycle the modem again. If I then restart any number of times into XP, then there is no problem. If I then restart into Win7, then I have to power cycle the modem.
View 1 Replies
View Related
May 21, 2013
I currently have a problem where I have to constantly reboot my ASA whenever my cable modem reboots. The ISP (Pen Tele Data) is setup so that my ASA has to obtain its' static IP using dhcp (ip address dhcp setroute) on the outside interface. Now, I also have another location with a cable connection (Comcast) that does NOT experience the same problem. However, the difference is this ISP allows me to assign my static IP directly on my outside interface. What can I do so that I don't have to reboot my first ASA everytime modem reboots.
View 6 Replies
View Related
Jan 21, 2011
Is it possible to block torrent ?
View 1 Replies
View Related
Mar 28, 2011
How can I speed up my bit torrent's speed for downloading torrent files.
View 2 Replies
View Related
Oct 4, 2011
When im using my torrent client bittorrent or now ive switched to utorrent i sometime have very slow internet. also when im using downloading using a torrent client even if im only downloading at only 20 kbps and not even using my total upload speed my router light is blinking very fast and i still have slow internet. I should note that on a website i go to and on my gmail notifier i get the error message " connection was reset".
View 14 Replies
View Related
Apr 25, 2012
We would like to disable torrent downloads in our network, we are having problems with employees downloading large files from different torrent sites, how could we disable said downloads in out main router without a server?
View 4 Replies
View Related
Feb 1, 2012
I'm using DIR-655 A5 (A4 in configuration page), with firmware 1.35W. My Internet connection is about 100/100 Mbps, through fiber optic. The problem is that when I'm downloading torrents, sometimes DIR-655 becomes unanswerable, no Internet connection and I can't access the config page. The only way to solve this, is to restart the router.
View 7 Replies
View Related
Aug 17, 2011
We are using WI-FI with more than 20 clients at a time.Now the speed seems to very decreased,because most of them using torrents for downloading.Is this the correct reason for low speed?How can I detect who or howmany people using torrent?And is there any need to block torrents?
View 3 Replies
View Related
Jul 8, 2011
My problem is that whenever I leave a torrent downloading for a few hours (using a wireless connection), my internet connection drops, both wired and wireless. I have to power cycle the modem and router to get things working again. When I plug my computer in with an ethernet cord and leave a torrent downloading, the connection doesn't drop.
View 1 Replies
View Related
Jul 24, 2011
I have the linksys WRT120N router and I want to block torrent programs, so that everybody can enjoy fast browsing with the modest but expensive package we are using in our remote location. How can I make certain that no one will be able to use them and abuse the internet?
It has to do with page of the router:
[URL]
But don't torrent programs use random ports?
View 15 Replies
View Related
Feb 17, 2010
I buy this model is QOS, I just read a lot of DIR-655 streamengine article, it's hardware-base QOS router, can operate under heavy p2p application, it's why I am here.The wireless Client is ACER AS1810TZ laptop, the wireless card is Intel wifi link 1000, I have already disable power saving option. AS1810TZ worked fine with my old 802.11G router linksys WRT54GS and Buffalo WRH-HP-54G.The dir 655 seems fine when I just surfing web and download some files with IE, but when I check the statistics, I see a lot of wireless error and tx packet/ rx packet dropped, the percent I calculate is about 0.5%, I am wondering if it's normal phenomenal?When I download several bit torrent files With XUNLEI simultaneously, total 6 files, after 3 minutes, lot of session be created, the router slow down the download and finally crashed, wan be reset and wireless connection lost. router can recover after 1 minutes and try to continue the BT download again, but failed again. [code]
View 14 Replies
View Related
Oct 29, 2011
When I start my torrent client (deluge) in short time computer disconnect from router. My I need to configure some settings on my wrt120n?
View 6 Replies
View Related
Nov 16, 2012
I know the F7D4301UK router browser interface provides some view and control of offline torrent activity as I've used it in the past. Not for a while though, and I don't recall the path after the [URL]. How I access it?
View 4 Replies
View Related
Jun 21, 2011
I did the ISC 5.2 on Solaris restore successfully but when I want to start the DB by running STARTDB but it gives me this error.
View 0 Replies
View Related
Oct 7, 2011
set the max download speed of torrent protocole by my router setup page ?My step father currently downloading with torrent and all the internet in the house is pretty slow so i will love to lower he speed so i can use my internet properly
View 5 Replies
View Related
Jan 7, 2011
If I try to set a torrent download to write directly to the USB drive on my E3000, it only works for a few minutes (at low speeds) and then I lose access to the drive and the torrent stops. I can access the drive again less than a minute afterwards.
It'd be handy to be able to write torrents straight to the USB drive instead of having to move the completed files to it after the torrent is finished.
View 5 Replies
View Related
Jul 7, 2011
i have WRT610N v1.0 with latest original firmware but ftp upload speed and torrent download speed is terribly slow.
View 3 Replies
View Related
Oct 2, 2011
I had a problem with my laptop ICS.
1 Acer laptop with windows 7 home premium
1 MSI laptop with windows 7 ultimate
1 Hp Netbook with windows 7 starter
1 USB Broadband
First i had connect the USB Broadband using by acer laptop to make as wifi router/wifi host via ad hoc.MSI laptop and Hp Netbook was successfully connected and able to connected to the internet which share from Acer laptop.Second, after that i am trying to use MSI laptop to create as wifi router/wifi host just like the same way what i done with Acer laptop.My both Acer laptop and Hp Netbook successfully connect to MSI laptop but only the Acer laptop was unable to connect to internet and it was showing "No Internet access". and the "homegroup something it showing "Unidentified network" on the MSI laptop.I had tried to restart all the laptop and netbook to resetting it, unlucky it still unable to connecting to internet.Also i had set all to "Obtain an IP address automatically".And i found out that my laptop ICS on service didnt starting and on Firewall didnt have ICS on the list.When i try to click the start buttom it popping out this:"The Internet Connection Sharing (ICS) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"
View 4 Replies
View Related
Jul 13, 2011
I have installed LMS 3.2 on win 2003 server. It was working fine for last 1 year. Due to some requirement we restarted teh server, after which the LMS services did not came up. Now if we are giving the command "net start crmdmgdt", it give the following error message.The service is not responding to the control function.While checking the application log in event viewer we are getting the error message " Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2"
If we are restarting the server then also similar kind of error message is appearing" Reporting queued error: Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2".
View 7 Replies
View Related
Jan 25, 2012
Since last week, the login to CiscoWorks page comes up blank. The output of pdshow shows all the processes running except CTMJrmServer.
Process= CTMJrmServer
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 01/26/12 18:08:11
[code]....
The CTMJrmServer is not starting and the log shows:
[ Thu Jan 26 18:08:14 GMT 2012 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,242,ERROR: Could not establish connection with JRM.
These are production systems running LMS2.6 and the users are not able to login.
View 0 Replies
View Related
Jan 20, 2011
device manager indicates it is disabled, but drivers are up-to-date
View 2 Replies
View Related
May 13, 2011
uupon starting my computer a blue screen appears and it crashes, I shut the entire system down and restart in safe mode.
View 1 Replies
View Related
Mar 6, 2011
I want to set up a wireless network with hotspot for billing.I have a Cisco wireless n router.My System info is below:
OS Version: Microsoft Windows 7 Ultimate , 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2013 Mb
Graphics Card: Radeon X300/X550/X1050 Series Secondary (Microsoft Corporation - WDDM) , 3 Mb
Hard Drives: C: Total - 119899 MB, Free - 26762 MB; D: Total - 118415 MB, Free - 102992 MB; G: Total - 305242 MB, Free - 19123 MB;
Motherboard: Dell Inc., 0GM819, , ..CN1374086607G4.
Antivirus: avast! Antivirus, Updated and Enabled
View 2 Replies
View Related
Apr 13, 2011
Actually I have a shared printer in network and when some user tries to access that printer of machine name \venus an error occurs netlogon service is not started.I have tried to start netlogon service on both machine (Printer server and client) but some machine in network can able to access that machine (\venus) but some machines gives error "NETLOGON service is not started"
View 14 Replies
View Related
Aug 6, 2012
First, I'm running Windows7 64 bit. So whenever I download a decently sized file; my download will start and get good speed for a few minutes, then it will drop off and stop and my connection to the internet will be lost for a short time while the connection resets. This happens if I'm using a program like Steam to download a game, torrenting something, sometimes on my Xbox 360 when it needs to update itself or a game, occasionally on a large app or album off of iTunes or patching an online game. However, I have no issue watching YouTube videos or playing an online game while also having TeamSpeak running in the backround to chat. I don't lose connection when browsing the internet at all and recently I was able to stream a live event without issue but I only tried that once (I don't have Netflix or anything similar).It usally isn't a big issue because my download will pick up where it left off most of the time but its a pain in the butt to have to add on an extra hour to a download sometimes for this.
View 4 Replies
View Related
Jul 27, 2011
I have Windows Server 2008 R2 set up to allow a vpn connection based on certificate verification. All traffic in my office get routed through a Netgear FVS318 Firewall in which I forwarded all the prerequisite ports to the Server. However, whenever I try to connect from outside the office Windows 7 reports that it either cannot establish a communication with the remote server or that the required Certificate is not installed. I verified the sslcert hash on the Server against the Certificate I installed at home and they match. I can ping both the dyndns and the IP of the office with no problems from home. Or does the firewall not allow vpn connections since it has the ability to host them itself.
View 2 Replies
View Related
Jul 27, 2012
laptop has frozen on "this programme cannot display the webpage". cannot access start menu, task manager or anything else. Can turn off with power button but when it comes back on it flashes on the desktop then reverts immediately to the "this programme ........." page again.
View 1 Replies
View Related
Sep 14, 2012
I do not remember exactly when this started but I think it was beginning of last week. Anyways, every time when I start up my computer and sign into my screen the internet connection does not seem to work right away. I thought first this was a problem with Google Chrome but then I tried other applications and it is the same thing. It takes about 30 seconds before I can get internet connection to do anything online even though down at the bottom right it says I am connected to the internet. The rest of the time I'm using the computer it's perfectly fine. It's only when I first start up the computer and sign into my screen. I don't know what's the problem so I'm hoping I can get an answer here from somebody.
View 2 Replies
View Related
Nov 14, 2012
I have Any Connect (ver 3.1.01065) configured on Cisco router 891. VPN is working fine from the desktop, but I also need the ability to establish a VPN connection through a RDP connection (i.e. I'm using RDP to connect to a PC which has AnyConnect installed on, then trying to establish a VPN connection). OS Windows 7 SP1 x86.I've read about changing some settings in profile file (changed the <WindowsVPNEstablishment> option to "AllowRemoteUsers". Then applied the profile to the relevant Group Policy. Connected VPN from the PC (not through RDP), so that it downloads the new profile, and then disconnected again.): url...
But this make sense to the cisco asa... I have a cisco router on the ios 15.1. I've checked the XML file on the local PC to confirm the profile has been downloaded and is has, and I can't see the AllowRemoteUsers option.So I still can't start VPN through an RDP connection. (Error is "VPN establishment capability from a remote desktop is disabled. A VPN connection will not be established".)This also happened with the previous version of AnyConnect (2.5.xxxx).The PC's local routing tables look fine, and I can't see any conflicts that would cause the RDP session to drop.In the main window of Cisco anyconnect secure mobility client Ive noticed label: Web Authentication required.
View 1 Replies
View Related
