Netgear FVS318 Firewall - VPN Not Starting?
Jul 27, 2011
I have Windows Server 2008 R2 set up to allow a vpn connection based on certificate verification. All traffic in my office get routed through a Netgear FVS318 Firewall in which I forwarded all the prerequisite ports to the Server. However, whenever I try to connect from outside the office Windows 7 reports that it either cannot establish a communication with the remote server or that the required Certificate is not installed. I verified the sslcert hash on the Server against the Certificate I installed at home and they match. I can ping both the dyndns and the IP of the office with no problems from home. Or does the firewall not allow vpn connections since it has the ability to host them itself.
View 2 Replies
ADVERTISEMENT
Jun 10, 2011
is it possible to to create VPN between static IP and dynamic IP on netgear FVS318?
View 1 Replies
View Related
Feb 24, 2012
I would like to connect a WRT54GS to a Netgear FVS318 router to proivde wireless access to my network. My current setup has my DSL modem connected to the FVS318 to provide my network computer with wired internet access. Can I simply connect the WRT54GS to the FVS318 using the LAN port? I've read other threads that mentioned changing the WRT ip address to 192.168.0.150 and disabling DHCP. i've don'e both, but I still don't get wireless access. My wireless devices can connect, but they don't have internet access. I have some questions below:
1. In the WRT setup, what do I use for the Internet connection type? Since my Netgear has that information already, do I need to put anything here?
2. In Setup -> Advanced Routing, do I neet to change the operating mode to Router?
3. Any other configuration changes that I need to do?
View 3 Replies
View Related
Dec 28, 2011
I have a Netgear ProSafe FVS318 wireless router whose login information I have lost. I have attempted to manually reset it using the reset button on the back, and return it to factory default settings (thus resetting the login information to admin/password).I have checked everywhere, including the documentation for the router itself. I have gotten multiple instructions on how to reset it (generally telling me to hold the button down for anywhere from 10 seconds to 30 seconds until the test light blinks or stays solid and then blinks or stays solid again, or telling me to hold down the button while turning it on). None of these methods have worked. The router still will not reset. It never reboots no matter how long I hold down the button, no matter when I release it, no matter what the orange "test" light is doing, and no matter if I begin with the router on or off. It will not reboot and I still cannot login.
The orange "test" light has behaved the same way each time; after 10 seconds, it turns solid, and then begins blinking before turning back off. After 20 seconds, it turns solid, and then turns off. It does this if I hold the reset button down for 10 seconds, regardless of whether or not I release the button after it first turns solid. If I continue to hold down the reset button, it continues this pattern indefinitely, for as long as the button is held. When I turn the router on, it turns solid before turning off, regardless of whether I am holding the rest button down. Its behavior never deviates from the observed patterns regardless of what I do. At no point has the router ever rebooted on its own.The default login should be admin/password, as this information is included on the bottom of the router, and in its documentation.
View 14 Replies
View Related
Feb 9, 2013
how to add VPN users for a Prosafe VPN firewall fvs318v3? I want to do a home to work vpn connection for several employees. All I am seeing is a place to put in IP addresses. Surely there has to be a way to set this up based on user name and password.
View 9 Replies
View Related
Apr 14, 2013
I'm starting my configuration and i created a test environment side by side with my production. i just run startup config and connected my ad-test.com AD host to it. i can ping ad-test.com from console, ok. but it can't get internet from inside environment
here's the config..............................
: Saved
: Written by enable_15 at 07:56:40.638 UTC Mon Apr 15 2013
!
ASA Version 8.6(1)2
[Code].....
View 8 Replies
View Related
Jan 19, 2012
I have an Avaya IP office setup on a 1.5 mb T1 PRI at location 1. My second location is going to run IP phones over 15mb/1mb DSL connection. All calls will generate from the IP office at location 1. I will have 6-8 IP phones at location 2.I assume i need a VPN setup between the two office for the IP phones to work. I've been looking for the best VPN solution and it appears for a budget the Netgear FVS318 or FVS338 is the way to go. If I go that route do I just need a FVS338 or FVS318 at both locations?
View 11 Replies
View Related
Jun 21, 2011
I did the ISC 5.2 on Solaris restore successfully but when I want to start the DB by running STARTDB but it gives me this error.
View 0 Replies
View Related
Oct 2, 2011
I had a problem with my laptop ICS.
1 Acer laptop with windows 7 home premium
1 MSI laptop with windows 7 ultimate
1 Hp Netbook with windows 7 starter
1 USB Broadband
First i had connect the USB Broadband using by acer laptop to make as wifi router/wifi host via ad hoc.MSI laptop and Hp Netbook was successfully connected and able to connected to the internet which share from Acer laptop.Second, after that i am trying to use MSI laptop to create as wifi router/wifi host just like the same way what i done with Acer laptop.My both Acer laptop and Hp Netbook successfully connect to MSI laptop but only the Acer laptop was unable to connect to internet and it was showing "No Internet access". and the "homegroup something it showing "Unidentified network" on the MSI laptop.I had tried to restart all the laptop and netbook to resetting it, unlucky it still unable to connecting to internet.Also i had set all to "Obtain an IP address automatically".And i found out that my laptop ICS on service didnt starting and on Firewall didnt have ICS on the list.When i try to click the start buttom it popping out this:"The Internet Connection Sharing (ICS) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"
View 4 Replies
View Related
Jul 13, 2011
I have installed LMS 3.2 on win 2003 server. It was working fine for last 1 year. Due to some requirement we restarted teh server, after which the LMS services did not came up. Now if we are giving the command "net start crmdmgdt", it give the following error message.The service is not responding to the control function.While checking the application log in event viewer we are getting the error message " Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2"
If we are restarting the server then also similar kind of error message is appearing" Reporting queued error: Faulting application dmgtd.exe, version 1.0.0.1, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x000385f2".
View 7 Replies
View Related
Jan 25, 2012
Since last week, the login to CiscoWorks page comes up blank. The output of pdshow shows all the processes running except CTMJrmServer.
Process= CTMJrmServer
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 01/26/12 18:08:11
[code]....
The CTMJrmServer is not starting and the log shows:
[ Thu Jan 26 18:08:14 GMT 2012 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,242,ERROR: Could not establish connection with JRM.
These are production systems running LMS2.6 and the users are not able to login.
View 0 Replies
View Related
Jan 20, 2011
device manager indicates it is disabled, but drivers are up-to-date
View 2 Replies
View Related
May 13, 2011
uupon starting my computer a blue screen appears and it crashes, I shut the entire system down and restart in safe mode.
View 1 Replies
View Related
Mar 6, 2011
I want to set up a wireless network with hotspot for billing.I have a Cisco wireless n router.My System info is below:
OS Version: Microsoft Windows 7 Ultimate , 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2013 Mb
Graphics Card: Radeon X300/X550/X1050 Series Secondary (Microsoft Corporation - WDDM) , 3 Mb
Hard Drives: C: Total - 119899 MB, Free - 26762 MB; D: Total - 118415 MB, Free - 102992 MB; G: Total - 305242 MB, Free - 19123 MB;
Motherboard: Dell Inc., 0GM819, , ..CN1374086607G4.
Antivirus: avast! Antivirus, Updated and Enabled
View 2 Replies
View Related
Apr 13, 2011
Actually I have a shared printer in network and when some user tries to access that printer of machine name \venus an error occurs netlogon service is not started.I have tried to start netlogon service on both machine (Printer server and client) but some machine in network can able to access that machine (\venus) but some machines gives error "NETLOGON service is not started"
View 14 Replies
View Related
Aug 6, 2012
First, I'm running Windows7 64 bit. So whenever I download a decently sized file; my download will start and get good speed for a few minutes, then it will drop off and stop and my connection to the internet will be lost for a short time while the connection resets. This happens if I'm using a program like Steam to download a game, torrenting something, sometimes on my Xbox 360 when it needs to update itself or a game, occasionally on a large app or album off of iTunes or patching an online game. However, I have no issue watching YouTube videos or playing an online game while also having TeamSpeak running in the backround to chat. I don't lose connection when browsing the internet at all and recently I was able to stream a live event without issue but I only tried that once (I don't have Netflix or anything similar).It usally isn't a big issue because my download will pick up where it left off most of the time but its a pain in the butt to have to add on an extra hour to a download sometimes for this.
View 4 Replies
View Related
Jul 27, 2012
laptop has frozen on "this programme cannot display the webpage". cannot access start menu, task manager or anything else. Can turn off with power button but when it comes back on it flashes on the desktop then reverts immediately to the "this programme ........." page again.
View 1 Replies
View Related
Sep 14, 2012
I do not remember exactly when this started but I think it was beginning of last week. Anyways, every time when I start up my computer and sign into my screen the internet connection does not seem to work right away. I thought first this was a problem with Google Chrome but then I tried other applications and it is the same thing. It takes about 30 seconds before I can get internet connection to do anything online even though down at the bottom right it says I am connected to the internet. The rest of the time I'm using the computer it's perfectly fine. It's only when I first start up the computer and sign into my screen. I don't know what's the problem so I'm hoping I can get an answer here from somebody.
View 2 Replies
View Related
Mar 25, 2012
I recently upgraded to Docsis 3.0 Routers Homenetworking Modem.Speeds are more than I am paying for when using WirelessOnly problem is. When I start a torrent in Bitcomet my whole modem will "disconnect".Including all the computers connected via Ethernet Cable.I have had the modem exchanged, same thing.I am not using a Router. The modem has wifi which I use.The modem stays online it's just that is loses its internet connection, I have had a technician over to see for him self, he didn't know what to do, he tried swapping the modem. Same thing.
View 2 Replies
View Related
Nov 14, 2012
I have Any Connect (ver 3.1.01065) configured on Cisco router 891. VPN is working fine from the desktop, but I also need the ability to establish a VPN connection through a RDP connection (i.e. I'm using RDP to connect to a PC which has AnyConnect installed on, then trying to establish a VPN connection). OS Windows 7 SP1 x86.I've read about changing some settings in profile file (changed the <WindowsVPNEstablishment> option to "AllowRemoteUsers". Then applied the profile to the relevant Group Policy. Connected VPN from the PC (not through RDP), so that it downloads the new profile, and then disconnected again.): url...
But this make sense to the cisco asa... I have a cisco router on the ios 15.1. I've checked the XML file on the local PC to confirm the profile has been downloaded and is has, and I can't see the AllowRemoteUsers option.So I still can't start VPN through an RDP connection. (Error is "VPN establishment capability from a remote desktop is disabled. A VPN connection will not be established".)This also happened with the previous version of AnyConnect (2.5.xxxx).The PC's local routing tables look fine, and I can't see any conflicts that would cause the RDP session to drop.In the main window of Cisco anyconnect secure mobility client Ive noticed label: Web Authentication required.
View 1 Replies
View Related
Mar 22, 2012
My cisco asa ar configured as show:
Cisco asa <outside int ip 192.168.1.2/30>----------------FIBER---------------------<192.168.1.1/30>Service provider------>internet
1-The network addressing between my cisco asa and the service provider is an private non routable ip addressing ( 192.168.1.0/30)
2-My lan pool are patted to 212.198.4x.xx to join the internet
3-The ip address used for pat is nat assigned to any physical interface
4-How can i configure a site to site vpn using the public ip address used for the pat.
View 2 Replies
View Related
Oct 20, 2012
I've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage
View 3 Replies
View Related
Nov 30, 2012
I am having long withstanding problem that I couldn't resolved till date. I am using My DELL VOSTRO A860 for more than 3 years.
My Wifi is not starting for any reason, I've installed the driver from your CD, manually downloaded from atheros site and I did all I could do to resolve the problem, but still the problem persists.
All other things are fine but still I am not able to use my wifi.
View 16 Replies
View Related
Nov 28, 2012
i'm new in wireless and have delegated a task to setup a wireless connection between two buildings (it should be on the same IP subnet), app. 300m apart. How to perform this task, what Cisco AP to use, antennas. I do have a WLC these APs will be connecting to. Currently have few extra 1142i AP - not sure if this can be used for bridging.
View 4 Replies
View Related
Mar 14, 2012
I have the same problems with the Cisco EPC3925?Everytime a wired pc reboots/boots everyone on the network losses internet, also wireless is disconnected. Also everyone get unidentified network and later its set to public network.We are using a Sitecom switch LN-120. I have to unplug this switch, then restart the router to fix the problem each time. Then I can plug it in again and everything is fine.The router will not restart (does not go further then 2nd blinking LED.) if I do not unplug the switch.
View 8 Replies
View Related
Oct 8, 2011
I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work. Points to note: 1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)
I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.
View 3 Replies
View Related
Oct 26, 2011
Dell Inspiron 1521 w/Vista Home Premium, wlan dell 1390. Adapter does not start at any time if I don't remove battery for a long period, or a shorter period if I depress the on/off button for 15-20 seconds. Works fine if it starts, but when it does not start it does not appear in Device Manager. If I close the lid (sleep) for even a split second the wifi will not come back on because the adapter is not active. The computer does not wake from sleep normally either, but that's been going on from the beginning and the wlan adapter is a new issue (in a long line of issues with this laptop.)
View 4 Replies
View Related
Jan 16, 2012
I have had same printer installed previously and tried to install new printer Kodak ESP C310, and now my pc states print spooler not running, went to admin tools, found print spooler, clicked on start and I get error 1068.
View 1 Replies
View Related
Jan 3, 2012
I am trying to setup a translation rule that takes any three numbers that start with a 4.. and translate it to 14.. I have tried a few ways of what I thought would work but nothing is working.
Examples of what I have tried:
rule 2 /(...)/ /1.../
rule 2 /4../ /1.../
rule 2 /4../ /11/
This is the rule that I use to delete the 1 when traffic flows out of my voip system.
rule 1 /^1(...$)/ /1/
View 2 Replies
View Related
May 14, 2012
I have a LinkSys WRT 160 N wireless router, the router just stopped starting abruptly, when i power cycle the router, all the 4 ethernet light come on, and that is where it gets stuck. I've tried using the reset button but there is no effect after i depress the button.
View 1 Replies
View Related
Jan 21, 2013
I have installed Cisco 2955 Switch which already have x.x.x.x EA12 IOS and I copied x.x.x.x.EA13 into the flash: with intention to have EA13 enabled for IOS. I set the Global config for boot system by 'boot system (no falsh)x.x.EA13;x.x.EA12' but then also no luck and was showing EA12 in 'sh ver'. I then deleted the EA12 IOS and set the 'boot system flash:x.x.EA13'. I also had varified IOS EA13 by 'verify flash:IOS Filename', it verified the IOS.
But when I reloaded my switch, I'm unable to login and its in 'switch:' prompt (ROMmon mode - I believe). I then tried for flash_init, load_helper, dir flash: (showing me EA13 there) and finally boot flash:IOS Image file but no good news here... Output like this
Error loading "flash:IOS Image File EA13" Interrupt within 5 seconds to abort boot process. Error loading "flash:c2950-i6q4l2-mz.121-12c.EA1.bin"Interrupt within 5 seconds to abort boot process.
My guessing is that the IOS is corrupted (but its not showing me Error loading Image blabla...) I'm trying with EA14 of 4MB and I have 3 MB free spare and decided to remove EA13 first then through XModem try to upload EA14.
Any useful way and recommend me deleting EA13 and upgrading EA14... Also option to set boot image with having two IOS at the same time for permanent use.
View 5 Replies
View Related
Jul 5, 2010
I just upgraded my ACS v4.0 to the latest available version v4.2(1) build 15 patch 2 and I've got some trouble with the CSLog service. I performed a successive upgrade first to v4.2 then to v4.2.1 and finally applied the two patches. Everything is working fine, I'm using both radius and tacacs services and they doing great like they were in v4.0. The only problem I have is with Cslog service which doesn't start. To be accurate, it starts but stops just after. I've uploaded some logs from cslog.log in cslog/logs directory.
View 6 Replies
View Related
Mar 2, 2013
I have a WLC 2106 with two AP's connected, But have not set up any authentication. I don't have CSACS at my disposal, so I thought I would try FreeRadius on my Linux Server. I am looking for User/Password auth, and for now I would expect to have those accounts local to the FreeRadius engine. (baby steps before I try PAM/LDAP/AD/Certs )
I have seen a number of posts asking final step questions. I was looking for more of a where to begin How To.
I have read the docs on Free Radius, and believe I have the method worked out on how to make a small change, run in debug mod to observe my change, to verify that I don't spend too much time pulling out my hair. I am fairly adept at CSACS 5.3 but it hides the magic of Radius from me.
View 4 Replies
View Related
