how to add VPN users for a Prosafe VPN firewall fvs318v3? I want to do a home to work vpn connection for several employees. All I am seeing is a place to put in IP addresses. Surely there has to be a way to set this up based on user name and password.
View 9 RepliesI have Windows Server 2008 R2 set up to allow a vpn connection based on certificate verification. All traffic in my office get routed through a Netgear FVS318 Firewall in which I forwarded all the prerequisite ports to the Server. However, whenever I try to connect from outside the office Windows 7 reports that it either cannot establish a communication with the remote server or that the required Certificate is not installed. I verified the sslcert hash on the Server against the Certificate I installed at home and they match. I can ping both the dyndns and the IP of the office with no problems from home. Or does the firewall not allow vpn connections since it has the ability to host them itself.
View 2 Replies View RelatedThey have a NETGEAR ProSafe VPN Firewall FVX538 on 192.168.1.1. They have 2 different wi-fi routers, one is static at 192.168.1.4, the other is not static.Someone donated a Linksys Wireless-B Broadband Router. They asked me to set that up. But i cannot get to the home page to change the IP address. 'multiple routers' it says to simply unplug one, so you can get to the config page at 192.168.1.1. I can not unplug the main router for the business, right? Do i need to change the IP of the Netgear temporarily? Will that bring down the network?
View 2 Replies View RelatedA client of ours has an 881-K9 router that they have configured a VPN on, this was setup and configured prior to my joining the company. This client now needs to add more usernames to the VPN on the router side, and I've both searched here, and googled for how to add users to the VPN on the router, the only thing that comes up is adding clients (from the client end PC), and nothing to show how to create the users on the CLI from ssh on the router itself.
View 1 Replies View RelatedI have a Cisco ACS 5.2 and have set it up as a RADIUS server. I was wondering if there is a way to add and update users automatically? We have a large number of users > 1000 that need to be added into the system and I don't want to do this manually. These users also update their passwords on a regular basis so I would need a script that would update the users automatically without any user intervention.
View 4 Replies View Relatedhow do I block IP/Internet Adresses for ALL users without adding the sites manually per user in the Parental Control panel? I want to block a certain IP/internet adress for all users but can't find this feature within my EA6500 anywhere?Is this a firmware bug? Has linskys forgotten that some sites want to blocked for all users and how do I do it all in one?
View 1 Replies View RelatedI wanted to know a few things before I buy. Here are my questions:1. What is the difference between the ProSafe GS116 and the GS116v2 What is the size of the Queue Memory Buffer present on the Netgear ProSafe Plus GS116E switch? I think I read that it was 512KB. What I need to know is, is that 512KB per port or shared amongst all 16 ports? 3. What are the differences between the GS116 and the GS116E? I know some of the differences, but I would like to know in detail about them, especially the hardware ones, before I make a selection.
View 7 Replies View RelatedAfter scouring the internet for weeks I've hit a road block trying to figure this out. I've got a Netgear Prosafe FVS318N router that I am trying to enable VPN on for my office. I've read all sorts of information online about port forwarding, VPN policies, and many other things that ultimately don't tell me how to set up VPN on my specific router.Now, I've set up PPTPD on an in-house linuxbox as a makeshift VPN server and I'm successfully able to establish a VPN connection to it from a local connection (e.g. 192.168.etc. local ip address). However, when I try and VPN connect from a client outside of my office's network, I try connecting to my router's external ip address and this yields no success. My ASSUMPTION is that this has to do with a port not being properly forwarded, or something of that nature.What are the necessary steps I can take with my specific router and router firmware, which is 4.0.1-66, in order to get a VPN server up and running that listens to outside connections?
View 9 Replies View RelatedI have an Avaya IP office setup on a 1.5 mb T1 PRI at location 1. My second location is going to run IP phones over 15mb/1mb DSL connection. All calls will generate from the IP office at location 1. I will have 6-8 IP phones at location 2.I assume i need a VPN setup between the two office for the IP phones to work. I've been looking for the best VPN solution and it appears for a budget the Netgear FVS318 or FVS338 is the way to go. If I go that route do I just need a FVS338 or FVS318 at both locations?
View 11 Replies View Relatedis it possible to to create VPN between static IP and dynamic IP on netgear FVS318?
View 1 Replies View RelatedI used to have a Netgear Prosafe 318 conncted to a Netgear Prosafe 336G in a small office environment across the WAN between two offices, IPsec preshared key. The 318 took a dive so I decided to upgrade to a new Cisco RV180 VPN router. I set up the VPN access rules exactly the same and forklift upgraded the Prosafe 318 (same IP, same rules, same pre-shared key, IKE setup etc) and the VPN tunnel comes up fine. However, even though the VPN tunnel says connected and I have no problems pinging anything across IPsec between subnets I cannot seem to connect to anything from the cisco side.
From the Netgear side I can connect to anything on the cisco subnet (192.168.0.1 / 255.255.255.0) but from the cisco side anything I try and connect to on the netgear side (172.16.0.1 / 255.255.255.128) times out.Encryption AES-128 (although also tried 3des), Sha-1 SA-lifetime is 3600 seconds, PFS key group enabled DH-group2 (although also tried group1)IKE policy direction Both, identifier FQDN (both sides), Preshared key SA-lifetime 28800 seconds. Firmware is updated on both the netgear and the RV180 to latest version (1.0.0.30 on RV180).Like I said from Netgear to Cisco through VPN tunnel everything works fine from Cisco to Netgear everything times out.
I would like to connect a WRT54GS to a Netgear FVS318 router to proivde wireless access to my network. My current setup has my DSL modem connected to the FVS318 to provide my network computer with wired internet access. Can I simply connect the WRT54GS to the FVS318 using the LAN port? I've read other threads that mentioned changing the WRT ip address to 192.168.0.150 and disabling DHCP. i've don'e both, but I still don't get wireless access. My wireless devices can connect, but they don't have internet access. I have some questions below:
1. In the WRT setup, what do I use for the Internet connection type? Since my Netgear has that information already, do I need to put anything here?
2. In Setup -> Advanced Routing, do I neet to change the operating mode to Router?
3. Any other configuration changes that I need to do?
I have a Netgear ProSafe FVS318 wireless router whose login information I have lost. I have attempted to manually reset it using the reset button on the back, and return it to factory default settings (thus resetting the login information to admin/password).I have checked everywhere, including the documentation for the router itself. I have gotten multiple instructions on how to reset it (generally telling me to hold the button down for anywhere from 10 seconds to 30 seconds until the test light blinks or stays solid and then blinks or stays solid again, or telling me to hold down the button while turning it on). None of these methods have worked. The router still will not reset. It never reboots no matter how long I hold down the button, no matter when I release it, no matter what the orange "test" light is doing, and no matter if I begin with the router on or off. It will not reboot and I still cannot login.
The orange "test" light has behaved the same way each time; after 10 seconds, it turns solid, and then begins blinking before turning back off. After 20 seconds, it turns solid, and then turns off. It does this if I hold the reset button down for 10 seconds, regardless of whether or not I release the button after it first turns solid. If I continue to hold down the reset button, it continues this pattern indefinitely, for as long as the button is held. When I turn the router on, it turns solid before turning off, regardless of whether I am holding the rest button down. Its behavior never deviates from the observed patterns regardless of what I do. At no point has the router ever rebooted on its own.The default login should be admin/password, as this information is included on the bottom of the router, and in its documentation.
I have some problem with the ASA 5510 ver 7.0(6). My manager wants to keep this as backup. tried lots of things but still users not able to access internet nor can i ping anywhere.For example when i ping 4.2.2.2 i dont get any reply.The runing config is below for ur ref :
HQ-ASA-01# show running-config
: Saved
:
[Code]......
I have a normal setup of ASA5505 (without security license) connected behind an internet router. From the ASA5505 console I can ping the Internet. However, users behind the Firewall on the internal LAN, cannot ping the Internet even though NATing is configured. The users can ping the Inside interface of the Firewall so there is no internal reachability problem. In addition, I noticed that the NAT inside access list is not having any hit counts at all when users are trying to reach the internet.
When i replace the ASA5505 with a router with NAT overload configuration on it, the setup works normally and users are able to browse the internet.
The ASA5505 configuration is shown below.
hostname Firewall
interface Ethernet0/0
description Connected To Internet Router
switchport access vlan 10
[Code].....
I purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
I have Cisco ASDM 6.2 for ASA and I have been requested to add a list of URLs and IP address to the whitelist on the firewall.
I haven’t had much experience using this program so unsure of where I go to add these and I don’t want to risk changing anything that might affect the security of the firewall.
I'm considering adding a dedicated Firewall to my network.Here is what my home network currently consists of:
-Comcast Arris TM722 Broadband Modem
-Netgear WNDR4500 N900 Gigabit WiFi 450/450 Router
-2 x Netgear GS108NA 8 Port Gigabit Switches
-1 x Netgear WN2500RP Universal WiFi Range Extender
-4 Pc's running Windows 7 Home Premium
-Netgear ReadyNAS NV+
-3 x Blu-ray players - Sony & Oppo (2 wired, 1 connected by WiFi)
-Sony PS3 (wired)
-Onkyo TX-NR905 AVR (wired)
-Sony KDL-55HX800 TV (wired)
-2 x Vizio E400 Seies Smart TV's (1 wired, 1 connected by WiFi through Netgear WN2500RP Range Extender)
-HP Photosmart Printer
All wired connections using Cat6 ethernet cabling.So, I want to setup a Gigabit Firewall between the modem and the router (and just use the router as the wireless access point) but I don't want to take a hit on my bandwidth speed.I was thinking of the Netgear ProSafe FVS318G for this.
My web server is out of public IPs. I requested more from my ISP and I got a different range with a different gateway. How do I handle the configuration on my Cisco ASA? Without any configuration changes to the firewall I saw the traffic hitting it and being blocked. I added an access rule to allow the traffic. I added a virtual interface on the ASA. I added a virtual interface on the web server. Using "Packet Tracer" the traffic flows from the outside interface to the new virtual interface. But I'm unable to access my web server and I don't see any traffic on that IP reaching the web server.Using Cisco ASA 5510.
View 8 Replies View RelatedI'm working with ASA 5520s. how to add network objects via CLI. I know I could easily do it using ASDM, but I like to learn the hardway first. How do I add the subnet mask for a network object when creating via CLI? [code] That sets up the hosts with IP addresses, but how do I add the subnet mask?
View 2 Replies View RelatedI'm tring to setup a DMZ for a guest wireless off of a 5505. So this device has a base license. It has vlan1 and vlan 2 for inside and outside.Another vlan is configured to be a failover for the currently active wan connection. It is using the "no forward interface" command.Can I add another vlan as a DMZ if I use the "no forward interface" command? [code]
View 6 Replies View RelatedI have an asa 5505 and I would like to adding a new rule for a network, however it was added, it seems it would be inactive. I have two inside network,192.168.12.0/24 (name: lanA) and 192.168.99.0/24. (name: lanB) I have the following in the running-config:
access-list lanB_acl line 1 extended permit ip 192.168.99.0 255.255.255.0 any
access-group lanB_acl in interface lanB_interface
But when I tried to reach a host in the lanA, the packets are dropped. I configure the asdm, which shows this on the LanB interface:
1 lanB_network | any | ip | permit (hits 344)
2 any | any | ip | deny
and I checked the packet tracer with: tcp, source: 192.168.99.57:10460 dest: 192.168.12.2:443 and it shows that the packet has been dropped by the last 2. 'implicit any any ip deny' rule, in spite of my access-list rule (access-list lanB_acl line 1 extended permit ip 192.168.99.0 255.255.255.0 any) preceded it, and active.
The lanB and lanA interfaces are the same security level 100, and I can reach the outside/internet from 192.168.99.57 Is it possible that I have to reload the rules or something like in order to apply? Or I missconfigured something?
I have one ASA 5520 up and runnign, with complete configuration (ssl customization, DAP, CSD...) with bunch of files on flash drive, etc. I am using software 8.3Now I received one 5520 that I want to use failover, it is with 8.3, I will make sure that ASDM is also the same on both...
So, my question is how to make my running ASA to become primary and to push all info (config, files on flash, etc) to new ASA?
I found few examples, but nothing tells me how to force one ASA to be the source for sync.
I am pretty new to Cisco networking and setting up a test router to use from home to connect into our network. My organization would like for us to provide upper management with home office setups to give them the ability to work from home. We will provide all of the equipment of course (router, phone and workstation). my boss wants me to use some of our old decommissioned equipment to set up a test home office to see how efficient and feasible it would be. I have a Cisco 1700 router, Altigen IP720 phone, and Dell Optiplex 380 workstation.
View 2 Replies View RelatedI am adding a failover asa to an a firewall that is already in production. They are both 5510's, they both have the same abount of ram, have the same code versions. Will there be any downtime while adding the secondary in?
View 2 Replies View Relatedwe're currently evaluating how we can attach our web based business application to the AD Agent in order to perform Single Sign-On against it. Our users are connecting via VPN to an ASA 5510 which is configured to use our Active Directory for authentication. After access granted the users may access a web server with our business application and should be automatically logged-in there without having to re-type their credentials.
View 0 Replies View RelatedWe recently upgraded a ASA 5505 with the security plus license to allow us to add a second subnet, but are having a few problems configuring the second subnet. The original subnet we have configured 10.1.1.0 is able to access the internet without any problems. However the new subnet 10.1.5.0 is unable to access the internet and when we ran a trace packet the nat config nat (inside) 1 0.0.0.0 0.0.0.0 is showing as the rule that drops the packet.
Additionally we have not been able to get the 2 subnets to talk to each other even though same-security-traffic permit inter-interface is configured. How to configure the subnet 10.1.5.0 to access the internet or to get the subnets to communicate. Below is a streamlined version of our current config.
!interface Vlan1nameif insidesecurity-level 100ip address 10.1.1.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 66.66.66.66 255.255.255.240 ospf cost 10!interface Vlan13nameif corporatesecurity-level 100ip
[Code].....
I have an ASA5510-BUN-K9 in this version:
###
Cisco Adaptive Security Appliance Software Version 8.0(3)6
Device Manager Version 6.0(2)
Compiled on Thu 17-Jan-08 17:42 by builders
System image file is "disk0:/asa803-6-k8.bin"
Hardware: ASA5510, 202 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
###
The question is what i need to add the CSC10 SSM with content filtering and url filtering to this version of ASA? Do I need more ram? Do I need more flash? Is this version compatible with the CSCSSM hardware? What licenses i need for 100 users?
I had a working active/passive pair of ASA5510's, and then I had to do a rush firmware upgrade, but didn't have time to do it on the secondary at the same time. Now I have made config changes and upgraded the secondary firmware to be the same, and wish to know if I plug it back in if it will think the secondary has the "correct" config or if it will know that the primary is newer. I disconnected the failover cable because it was complaining about version mismatches constantly.
Is it safe to add the secondary back in or is it possible it will be declared newer and overwrite the config?
I set up a cisco 2811 to replace a netgear router at the office. I have nat set up and with ccp I added a firewall on the router using the basic firewall wizard. Just about everything works internet, receiving and sending emails on exchange from the pc. Issue I'm having noone can access the company email on their phone.Also theres a camera system that would be accessible to view from the live feed from outside the office and my boss can't access the camera. I port mapped all the custom applications and added new traffic rule from self -> outzone. It didn't work tried to add one from outzone -> self or inzone but i get a prompt stating it only accepts protocols tcp,udp, sip, h323, icmp and a few other I can't think of. I'm pulling out my hair trying to get this to work everything worked seamlessly on the netgear router and nothing was really defined just the inbound ip address of the applications and protocols that are allowed.
Lets say for reference purposes my ip addresses for internet is
internet
55.34.23.43 /24
email server
192.168.10.252 /24
web cam application
192.168.10.10 /24
8000 in
8001 out
I have 10 user license for Cisco ASA, i have to use this ASA for client connectivity. Can i do NAT of more than 10 users with this license? What i understand is NO.
But as per Below explaination looks like, i can if i am not doing default routing? Actually i just need to add a specific Route towards client DMZ interface on my ASA, no default route, so can i use more than 10 concurrent sessions with this license?
I am using ASA5505 and I would like to block certain websites such as facebook.com on some users only
View 3 Replies View RelatedThere are 10, 50 and unlimited users profiles for the ASA 5505, reason for that restriction? Does that mean for example that only 10 users can go through a 10-user 5505?
View 6 Replies View Related