Two Home Routers To Access Internet From Work / Internet Cafes
Feb 22, 2012
I have a laptop that I take to work, and would like to set things up to use my home internet connection from elsewhere. I don't have another computer to function as a server for me at home, so would like to do it so that my router alone provides this access (log into it from the internet anywhere and use my internet as if I am using it from home). How would I go about doing this? Would it require installing new firmware?
View 1 Replies
ADVERTISEMENT
Jun 29, 2012
do internet cafes use static ip or dynamic ip address. Also what would be the benefit if they used a static ip address.
View 1 Replies
View Related
Feb 14, 2011
Until recently when we changed the router at work, I can access work files from my laptop and notebook from home. It seems the problem is probably from my home wireless router supplier by-aol as I can access work from my laptop anywhere else except my home. But then I have been able to do so until the work router was changed so i don't know what could be wrong?
View 1 Replies
View Related
Jan 10, 2013
how do i connect my pc from home to use with the works internet via usb internet stick
View 3 Replies
View Related
Mar 30, 2013
I recently was given an old computer from work. I tried to connect it to the internet at home but it wouldn't connect. The icon at the bottom shows that it is connected but the web browser shows that i'm not connected. All the computers at work are connected to a network so there may be some settings that won't allow it to connect at home. I did go on to internet options under connections and changed the default connection from the work network to broadband but still no luck. None of the proxy boxes were checked either. The OS on this computer is Windows XP. Also, all connections to my home internet are fine.
View 2 Replies
View Related
Aug 18, 2011
I have a problem on my Windows XP PC. He does not think the internet all I've found on the internet does not work.
View 1 Replies
View Related
Jun 15, 2011
I was recently given a computer from my workplace. I took this computer home, and put it in the place of my old one. The internet connection on my old computer has always been fine; all cables are connected correctly. However, this computer from work will not connect to the internet. The icon in the bottom right corner of the screen states that I am connected, but the internet browser claims that it is unable to display web pages. May the cause of this be related to any unique computer settings that a workplace may have on a computer in their network? Other computers have no problem connecting to the internet through the same, wired connection. The OS is Windows XP Professional.
View 2 Replies
View Related
Jan 26, 2012
i would like to know that how to stop internet access through network complete internet access
View 2 Replies
View Related
Jun 28, 2011
I have one lan with several PC's and static IPs 192.168.0.x 255.255.255.0 and 2 routers. One is 192.168.0.1 and the oter 192.168.0.11. I want every PC gets internet from gateway 192.168.0.11 and the other connection is set with static public IP for incoming Terminal Server Clients. The router for that connection, 192.168.0.1 has NAT setup for several ports which redirect traffic to 3 different computers. But the traffic is not redirected while those PC have the first gateway for internet (.11). To keep NAT working these 3 PC get internet from 192.168.0.1 but I don't want any computer to go out through that router.
What can I do to give internet through router .11 and send traffic to 3 of them from the other router .1 from internet to the lan?
View 5 Replies
View Related
May 12, 2011
I have a motorola usb modem which is connected to my laptop and i have shared the connection and have an ethernet cable from laptop to wireless modem (TP-LINK) such that other wifi enabled devices can connect to it.Now we have electricity blackouts and when that happens my wireless router gets turned off. Internet on the laptop is working fine, now when the electricity comes back and the wireless router is on, the net does not work on the other wifi devices and only my laptop (as its directly connected to the modem).I have to reboot my laptop for the shared connection to work.
View 2 Replies
View Related
Dec 12, 2012
I just switched from an AT&T T1 ISP to Comcast cable, which supplies a motorola modem, pushing 5MBPS downstream. This modem is not recognized by the router, a Belkin wireless G model, F5D7234-4 V5. After numerous attempts to restart both the modem and the router, the modem light does not turn on, nor is a wireless connection recognized by my computer, a new Macbook Pro. The router worked fine with the AT&T connection.
View 1 Replies
View Related
Feb 18, 2010
I have configured the sr520 using cca.Basically I have a device connected to the sr 520 via wireless with the ip address 192.168.200.160.
The SR connects to the internet using adsl and pppoe.I configured NAT to the device for a number of ports, however it doesnt work.
View 16 Replies
View Related
Aug 22, 2012
I have two PCs with the same problem. The ethernet port on the motherboard does not recognize an Internet connection. I'm running Win 7 64 bit Pro on both. My older PC needs to have the enternet cable disconnected before Windows boots, then once the OS is all booted, I plug the ethernet cable back in and I get an internet connection. On my new PC, I had to go into Device Manager and delete the ethernet card ( not the drivers) then reboot. Windows then recognized the card and connection and the Internet works. What is causing this? One PC is an Intel I-7 quad core, the new one is an Intel I-7 six core. Both hardwired to the Belkin N router. My old XP PCs do not have this problem.
View 2 Replies
View Related
Jun 4, 2013
How can I update my router if my Internet won't work with the router connected? Right now my Ethernet line is going directly from my PC to my modem. Belkin N750.
View 1 Replies
View Related
Sep 8, 2011
Since yesterday im unable to connect to the wireless connection in my dormsI'm able to connect but i get yellow triangle with exclamation mark in it, and it says "no internet access".In the living room im able to gain internet access, my friend also tried in my room and he was able to get internet access, he has tp-link adapter on his laptop.I have dell vostro 3500 with "DW1051 wireless-N WLAN half-mini card" as my adapter.I opened IE9 and pressed "Diagnose connection problems" and got the messege "Wireless Network connection" does not have valid IP configuration.OS: windows 7 ultimate x64
View 6 Replies
View Related
Jul 1, 2012
Why should it be so hard to do? You can now access a web cam via internt web address. Why not my home wireless computer via internet router internet address??
View 1 Replies
View Related
Mar 23, 2012
I have 2 linksys routers installed on my home network. The primary router is a linksys WRT360n and is stationed inside the main home, while the 2nd is a linksys WRT160N located in my office. I've connected them via the lan to lan configuration and have disabled DHCP server on the 2nd. I can access the 2nd router via my primary PC but am unable to access the internet or see the primary from the PC connected to the 2nd router.
View 3 Replies
View Related
Apr 27, 2012
I managed to flash my router (Belkin Sharemax N300) to dd-wrt and set it up as a repeater using these steps in the wiki, but I can't access the internet via the repeater. I can still connect to it, though. I don't know that much about networking.
View 1 Replies
View Related
Jun 19, 2011
Currently I'm living in a dorm. The house has wireless network. But WEP encryption is used to secure it. I know this method is not safe. Also since there are many people are living in the house i don't want my computers be connected to this network.What i want to do is to setup my own network. I bought a NetGear DGND3300 router. I setup a WPA2 protected wireless network. I can connect all my devices to this network but naturally this way i have no Internet access.Is there a way to use Internet access of the house's router but still keep my local traffic not seen by anybody else
View 2 Replies
View Related
Apr 22, 2012
I'm a member of a club and we have just got BT Business Broadband with BT Business Hub 3. The club has one WiFi laptop which will occasionally access the BT Hub 3 using WiFi for internet use only. So essentially we have no network as such, just the BT Hub and a laptop.I would like to allow some club members to have internet access (WPA2 password), but without allowing access to the club laptop in any wayAs I said previously, the club laptop will only be active occasionally, so actual exposure is limited, but ideally I would like for the club laptop to be invisible to others when it is connected. I would also like each members equipment to be hidden from each other, so nobody can access each others data etc.. Can I achieve this simply? If so, do I need extra equipment?
I do have some donated equipment available: Netgear WAG102 Wireless Access Point, D-Link DSL-2640R Broadband Wireless G ADSL2+ Router and US Robotics 9106 SureConnect ADSL Wireless Gateway. Could I use any or all of these?I know this donated equipment is only Wireless G, but speed for the members is not important as they will only use internet access for emails and occasional google searches etc.I've tested the WAG102 at home, by plugging it into a LAN port of my BT HomeHub3 and giving it a different SSID, which works OK, but I can still see the other equipment connected wirelessly to my BT HomeHub3, although I cannot access my home laptop etc. because they are password protected.
View 3 Replies
View Related
Nov 24, 2011
Orange sent me a replacement Netgear DNG1000 and from the moment I had it there was issues, if N mode was enabled and I had to set it to B/G only for it to have a stable connection, not a problem as I only use it for the internet. The range on it was roughly the same as the livebox. For a few weeks it worked fine until recently it started to go insane, on the main computer the wifi works most of the time with 80%-95% signal strength, and then every now and then it will suddenly lose communication with the router but act as if it was connected for 5-10 minutes, signal strength is still at about 90% yet I can't access the router or the internet. Wifi works fine at full speed on the stairs, drops to a few bytes per second on the landing and then increases back up to full speed in the room next to it. In the one bedroom the wifi works up until the door where it instantly drops from full speed to a few bytes a second. This drop off point is only a few cms, as in full speed at one place, move it back a few cm and it slows down loads, but I still get 4-5 bars on windows and -50 RSSI on inSSIDer, about 94% strength and a link quality which tends to fluctuate. What could be causing this, specifically the weird instant deadzones and randomly not responding.
View 1 Replies
View Related
Jun 17, 2011
I would like to have the ability to turn off the internet access to my teens computers without effecting myself. I have parental controls on my computer which work great, but this does not work to the other computers that are able to connect wirelessly. I have a router but I am not sure how to access it.
View 3 Replies
View Related
Oct 3, 2011
For the past weeks, I've been experiencing NOT to able to 'access' Home Page on daily basis. It occurs exactly 'once a day,' often early morning but sometime even in the middle of night. For this to resolve, I need to unplug a black cable connecting to Router and plug back in to 're-start' Internet connection. This pattern happens after having replaced a brand new modem and router, saying a Modem has an issue diagosed through the phone of my ISP.
With an older modem, however this, .... 'disconnection once a day' never occured. The tech guy told me 'signal' is OK, but there are 'too many computers' in my household. However, my ISP, Comcast allows us to use 5 different PCs, then the tech. guy's diagnose did not correspond to this at all.
As to 'multiple PCs,' we, the family never use more than 3 PCs/Internet at a time. Most of time, we use only two PCs for surfing and e-mailing/photoes. Two other PCs are a sort of 'back-up' puposes ONLY.
View 3 Replies
View Related
Dec 5, 2011
I replaced a Netgear router with a similar Netgear router, but the LAN is no longer working.The old Netgear router would drop internet, but LAN would work. Replaced it, the new Netgear router works fine with the internet (cable modem), but the LAN with two computers will not work. The desktop with Windows XP, and a laptop with Windows 7. After runing network setups on both computers several times, I have been unable to reestablish the LAN, however internet access via the router is working. Reinstalled the old router and the LAN works fine, allowing file and printer sharing. Old router is a Netgear WGR614v2, new router is a Netgear WNR2000how to reconfigure the router/computers to get the LAN working again with new router.
View 8 Replies
View Related
Feb 18, 2012
I am running a VPN server on my desktop at home, with all the default settings, and i checked the box that allows clients to connect over the internet. this is win7 x64 computer. I opened up port 1723 with PPTP protocol on my E4200 router.On the client i am running win7 x64 as well. I am able to connect to the vpn, from another internet connection, but there is no local network acess. It says the status is No Internet Access. and the IP that is assigned is the 169.x.x.x one that windows defaults when it doesnt find a dhcp server.How can i get the client to connect with full local network access. Right now being connected to the vpn, it means nothing, i have no access other than being "connected".
View 1 Replies
View Related
Aug 23, 2011
i'm having an issue with a computer on my home network (Windows XP Professional SP3, latest updates) where i can't access the Internet or even the router on my home network (which it is part of).if i look at the network connection (wired) under control panel it shows as connected, and it's set with a static IP address (always has been), so nothing looks out of the ordinary there, yet if i try opening Internet Explorer i just get the "page cannot be displayed" page, and i can't even ping my own router- request times out.I've tried connecting a wireless adapter that i use on my laptop every day.. it connects to the wireless network no problem, but still the same results with IE and pinging the router.
View 4 Replies
View Related
Jan 31, 2013
I am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.
View 2 Replies
View Related
Apr 1, 2013
It is a Satelite 733. Have pinged without any response however the wifi or hardwire will show connected to the local net.I have four other units surfing the web fine and wifi picks up ok except for one unit that my neighbor need will not connect no matter what. Have updated all the drivers, uninstalled and re-installed devices, reset ip, dumped the dns several times, etc.So here is the ipconfig stuff....ignore the cable connect I only have the wifi on at the moment. I have stared at this to the point where I know naathing .Is the tunnel adaptor the indication that the card is out? Oh and I tried taking out IPV 4 on both channels and nothing so I left one with 4 on and the other with it off just as something else to try. [code]
View 2 Replies
View Related
Mar 7, 2012
I'm just about to trade-in an E4200v2 for a E4200v1, primarily to regain the "Internet Access Policy" capability.
Just wanted to do a reality check with those of you who tried/use IAP... does it work basically as advertised?
I would be using IAP to specify MAC addr's of devices, blocking them from certain URL's and limiting their hours of Internet access.
And I plan to have Linksys's DHCP Server turned OFF, since my Windows Server handles DHCP on my network.
Should I expect all of this to work OK? No major reliability problems with IAP?
View 5 Replies
View Related
Apr 26, 2011
The problem that I am facing is while accessing internet.I have replaced the LAN card also. It sends request but receives nothing. The cable line is also working fine
View 5 Replies
View Related
Jan 30, 2013
1. ADSL Wi-Fi router provided by my ISP. This is the primary router for my network which is connected to the internet. Router IP: 192.168.1.1 (DHCP enabled) 2. TP-Link wireless router which is connected to the primary router through its LAN port (not WAN) with its DHCP turned off. So I'm using this router ONLY to extend the network to another area. This is a 3G enabled router. Router IP: 192.168.1.2There are two different wireless SSIDs but basically only ONE network (all the PCs connected through any of the two routers are on the samesubnet and have same IP range i.e. 192.168.1.x). I want to use the 3G internet connection through the secondary router when the ADSL connection is down. Whenever the ADSL connection is down, I would just connect the 3G-USB to the secondary router, all the computers on the network should connect to the internet while skipping their route through the primary router WITHOUT CHANGING ANY SETTINGS. Is it possible? Do I need to modify the routing tables? Or is it
View 4 Replies
View Related
Jun 6, 2012
I am trying to set up a PPTP VPN connection which also provides internet access. I have the following configuration. The router named "Router1" connects 2 computers PC1 and PC2 on the LAN side with a network address of 192.168.1.0/24. It is a PPTP server and a DHCP server. It gives IP addresses to PC1 and PC2. It has a static address of 192.169.1.2 on the LAN side and a static address of 10.2.9.1 on the WAN Side. PC3 has a static address of 10.2.9.2 and is connected to the WAN port of Router1. "Router2" is connected to the LAN side of Router1 and it has a static IP of 192.168.1.1. Router2 is connected to the internet and provides internet connection to PC1 and PC2. PC1 and PC2 connects fine to the internet and can see each other. However, PC3 cannot connect to the internet even though it is connected to Router1 by PPTP VPN connection. PC3 can see PC1, PC2, Router1 and Router2 but it cannot connect to the internet because Router1 does not give it the default gateway(192.168.1.1) to connect it.
When PC3 connects via PPTP, It receives a correct IP address(10.2.9.3), correct DNS addresses but the ip4 default gateway field is left blank, and the DHCP option is not enabled on connection properties of PC3. Router1 is a DD-WRT firmware router (DLink Dir 400) and has PPTP server enabled as a service. How do I get Router 1 to give PC3 a default gateway IP? And how do I forward all outgoing packets from Router 1 to Router 2? I do not need portforwarding for some ports, I need full access to the internet from PC3 though the PPTP connection via Router2
View 2 Replies
View Related
Mar 10, 2011
I'm setting up a small network (one server, two clients) to create photo sales kiosks at an upcoming outdoor event. I will need internet access for processing credit card payments but there won't be any wi-fi or ethernet internet access on the site so I'll need to utilize my iPhone's 3G connection. I recently installed "MyWi" app which can tether the 3G and even create a personal wi-fi hotspot but unfortunately it only works in ad-hoc mode, not infrastructure.So far, the wired LAN is working great on my three Macbooks, using a Linksys (DD-WRT) router. Also, the wi-fi hotspot is working great to provide internet to all the computers. The problem, of course, is that I can't have both connected at the same time or else everything breaks. I've tried doing an iPhone-USB-Macbook tether and then sharing the connection via ethernet but the internet doesn't get through the router (because I don't have a clue of how to configure the router for this). I've also tried setting my router (DD-WRT) to do a client-bridge of the iPhone ad-hoc wi-fi, but again, it's way over my head and didn't work.
View 2 Replies
View Related
