My Verizon USB connection to the internet, suddenly stopped connecting to napster. Prompt says: "Server is unavailable at this time." No one at Verizon has a clue about fixing the problem, which Napster says is a Verizon connection problem..What to do??
View 1 RepliesI have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.
I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies View RelatedI'm currently running a BEFSR41 V3 router with firmware version 1.05.0 It seems that there is no update retry if the dyndns server is temporarely unavailable. Is it possible to initiate an update via command line or is a new firmware update available to solve this issue?
View 1 Replies View RelatedI have two Nexus 5520 running 5.0(3)N1(1c).
I have both boxes heading off to ACS for TACACS lo gin authentication and for command authorization. When I first set things up everything works fine. I have a shell profile configured in ACS with Cisco-av-pair*shell:roles="network-admin" to set the network-admin role. I even have command sets configured to deny the use of configure terminal as I am using switch configuration profiles. Everything runs fine. User lo gins are authenticated by ACS and users have the correct command set applied to them.
The problem comes when I make a change to a shell profile in ACS. Even something as simple as changing the name of a shell profile causes the 5520's to crash as soon as I try to log on. If I unplug the management link so that the TACACS server is unavailable I can log on fine with the local admin user.
The NEXUS console reports this error. (amongst many others)
EDNAM-NEXUS-2 %$ VDC-1 %$ %SYSMGR-2-SERVICE_CRASHED: Service "Tacacs Daemon" (PID 4331) hasn't caught signal 11 (core will be saved).
A show system reset-reason shows:
EDNAM-NEXUS-2# sh system reset-reason
----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---
1) At 389 usecs after Wed Jan 18 12:32:49 2012
Reason: Reset triggered due to HA policy of Reset
Service: Tacacs Daemon hap reset
Version: 5.0(3)N1(1c)
Could this be a bug with Nexus/ACS?
How do configure win2008 server to bring up a password prompt box when access via a workgroup pc on lan.
View 1 Replies View RelatedI have a Cisco 819 router which has a built in GPS capability. GPS recieves a very accurate time from the satellite. Is it possible to use this accurate time source to set the time on the router, and then use it as an NTP server?
View 7 Replies View Relateddlna server of ea4500 does not supports time seeking? No rewind? I have tryed to plug usb-flash with video files for testing before buying an external HDD and... REALLY no time seeking?
View 3 Replies View RelatedI did a System Recovery after my computer had the virus that redirected me to a pop ups and different websites every time. After System Recovery I no longer have internet connection on the computer I used. All the other devices and computer can access my router but not the computer that I've used System Recovery on. I looked at Device Manager and all of my Networking Devices are working properly. I even looked at Wireless Zero Configuration and the Startup type is Automatic and the Service Status is Started.I go into Network Connections and my USB Adapter has an red X on it. I right clicked properties and looked at wireless networks and the preferred networks is grayed out[CODE]
View 3 Replies View RelatedAll my other stuff is connected to the internet (PSP, laptop, iPod) wirelessly but my computer can't seem to detect any networks at all.
View 19 Replies View RelatedIn control panel networking, I'm getting "Wireless Connection Unavailable". Device Manager reports that the card is working & is enabled. Netgear Configuration panel shows that the card is scanning & transmitting OK but is not receiving a signal. Router wired LAN connections are working OK but it appears that the router is not transmitting.
View 1 Replies View RelatedRegion : Sweden
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0_1.1_up(120926)
ISP : HessleholmNetwork
My TD-W8968 has begun to freeze up. It had been running for about two hours before this happened. It's a "slow" process that starts with the web interface being unavailable, i'm unable to connect to the modems web interface.And at about the same time it becomes impossible to connect new devices to the wireless network. Right about this point i did a speed test over the modem and performance was abysmal.It was so slow that my web browser believed that it was offline! But i was able to re run the internet speed test once more before it totaly locked up! At this point it was impossible to use the TD-W8968.
This was the,, i don't know,, perhaps the fifth time it happened in a row. It has been running perfect for two months before it began acting up like this.I have done a reset of the modem, didn't solve the problem.I have also done a reflash of the firmware, i've had the latest firmware since i bought the TD-W8968. But the reflash didn't solve it
My WRT120N router doesn't have Internet Access Policy when I access it.
View 2 Replies View Relatedwhy i can't add a new policy. I can't fillin a policyname or change the status from disable to enable. I have model V2 with firmware v2.0.03 build 007Jul 2, 2009
View 3 Replies View RelatedMy PS3 recently got stolen. I was informed that the detective assigned to my case can contact Sony with the serial# and MAC address to track it down.I realize that there is this way:" If all you have is the serial number SCEA would need the MAC address, and only SCEJ has the "master list" of serial number to MAC address comparison. All SCEA would need from your local PD is an affidavit request / warrant (whatever their specific agency prefers to use or call them) asking SCEA to acquire said information."However, I also realize that I can find my MAC address through command prompt on my windows. However, there are more than one MAC addresses (or physical address as referred on the command prompt). My Question is, how do I know which one is the same as my PS3 MAC address?
There are these choices:
Wireless LAN adapter Wireless Network Connection 2:
Wireless LAN adapter Wireless Network Connection 2:
Ethernet adapter Local Area connection
Ethernet adapter Bluetooth Network Connection
I have AP which is not connected to switch.I console it and it gives error unable to to get IP from WLC.Need to know is there any way that i can go to command prompt of this AP without getting IP from WLC? I tried control + c etc it does not go to command prompt.
View 8 Replies View RelatedI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedI know a little bit about computers but I am having problems trying to connect to the internet that I cannot figure out. I connected the Ethernet cable to the back, it lit up, but it still says Local area connection doesn't have a valid IP configuration.
View 1 Replies View RelatedI'm new to networking (at least at this level) and need some guidance. First, I have an Actiontec MI424WR (Rev. F) Coax Verizon Fios modem that I use as my home networking wireless router. From a LAN port on that I've connected a cable to the WAN port on my DIR-655 which acts as my gigabit office hard wire/wireless router. I need to keep the home network and the office network separate.All of my computers are Windows, either 7, Vista or XP.Connected to my Dir-655 on the office network are 2 wireless computers, a printer, an IOMEGA 1TB Home Personal Cloud NAS HDD, plus 2 desktop computers.The DIR-655 is set with a static IP address matching the range of the Actiontec. The DIR-655 is set for DHCP for the devices on the network (although 2 of the computers have static IP address).
When the DIR-655 had a Dynamic IP address set by the Actiontec, the IOMEGA NAS HDD kept losing connection with all the devices on the network. Only after I set the DIR-655 to static IP did that stop and everybody started to play nice. I'm not sure why that would make a difference, but it did.But regardless of whether it is set to dynamic or static, no computer on the network or program, even third party programs, can connect to ANY of the time servers out there... and I mean any of them. I've tried at least 20 or more of the standard and not so standard ones. The DIR-655's time is off, and it is set to get time automatically. None of my computers, or my IOMEGA NAS, can access time. The Actiontec, though, seems to be set correctly.Everything connects to the internet just fine. Web, email, auto product upgrades. Fine. So far it's just the time server thing which troubles.I done everything I know how to do to enable Port Forwarding through both routers for NTP > UDP 123 since that is the standard port for the Network Time Protocol, but I could have easily screwed that up.
I have access controls setup on my DIR-825 which work fine until there is a power outage and my router comes back up.I am using Automatic Time Configuration and have the NTP server set to ntp1 [URL]When the router comes back up I checked to make sure the NTP server option is still enabled, and it is, however the current time is totally wrong.To fix this I had to go to the pull-down, select 'ntp1.dlink.com' and then save the settings. After this the time is correct again.This is as bad as not having the Automatic Time Configuration option at all, since I can't guarantee that the power won't go out. I do not have a UPS hooked up to back up the router, nor do I see why I should need one if the Automatic Time Configuration actually worked.know if there is a way of making the Automatic Time Configuration reliable so the time on my router is automatically corrected when the power comes back up?
View 3 Replies View RelatedWe want to get a network time server appliance that will be used only as a device to provide time to network devices as well as workstations. Our network infrastructure contains CISCO 3750G's, 4506's and 6509E.
View 0 Replies View RelatedAI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies View Relatedi have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
I am sending TACACS administration logging to a syslog server. When the messages show up on the syslog server, they are 5 hours ahead of the actual time. Time on the ACS is correct - local logging shows the correct time. Time on the syslog server is correct...all other devices/systems sending syslog messages to it are coming through with the correct time. why the ACS syslog messages would be 5 hours ahead?
View 3 Replies View RelatedACS5.2 time sync breaking once in near around one month and not able to authenticate after that .I am using domain controller (Windows Server 2008 R2) as NTP server for ACS .
What is the reason for it , is there any bug in 5.2 release or do i need to configure a thired device and point as NTP for ACS and domain controller.
For weeks guest access to my e3000 worked fine. Today I have a friend come over, his XP connects to the guest wi-fi, but his computer does not get a prompt for a password.
View 6 Replies View RelatedRegion : Singapore
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : starhub
1) Always auto disconnect (limited access),
2) My smart phone Motorola MB860 (android 4.0.4) Can connect but can access internet.
3)Always connect to 2.4GHz ,never see connect to 5GHz.
4)Wireless connection 15-20 Max Mbps Only ,LAN can up to 50 Mbps .
refers a location that is unavailable.it could beon a hard drive on this computer.
View 1 Replies View Related2 months ago, I bought a RVS 4000 for my personnal use. I recently had fiber with about 200Mb/s in download and there are no router that can handle such speed so I search online and I found the RVS4000 and the new on RV180 ... My shop near my house only had the RVS4000 so I bought it (even if I know that it had some problem and it was discountinued...). I check all the problem online and it was problem on the VPN part... so I bought it.
But since I had it, It seems like my connection was dropping every now and then... so I start to check my installation at home... I check the network error... nothing.. I change my network cable... still the problem...
So I called cisco and they send me another one... so I put it back online... and then... same problem... I ask a friend at work, he tried to understand and tell me it was maybe my personnal switch because it was old... so I change it.... but same problem...
I start to track my bug... I found out that there was a hidden telnet available on the RVS4000 so I enable it to see all the process available...
I made a linux script to see when the router was unavalaible ... and I found out that it was every 30 min... I was able to have at the same time a "top" command on the router in a shell ... I found that a process was reaching 100% of cpu use and the loadaverage of the router was increasing from 0 to 5 or 10 sometime... And my laptop was starting to lost packets... (this is normal because the router isn't able to process the connection)...
I try all the firmware (old and new) I try also to put the router in factory default state ... same problems...
I attached a copy of my screen with the network unavalaible..
So from left to right:
ping 192.168.1.1 (the router)
ping google.fr (from my laptop)
on the top right:
top (on the router)
bottom right:
my script which tells me that if the routeur is avalaible or not
I've been trying to connect to the internet all day. Every time it connects, but only with limited connectivity. I run troubleshooting, but it doesn't fix the problem. Sometimes it won't have anything to report back other times it says that the default gateway is unavailable. My laptop is the only device in our home that won't connect, so I don't think it's the router.I think the router is a cisco router, there is a cisco box mounted on the ceiling with a cord leading into it (I don't have access to any buttons though)I live in an apartment building with free internet, so I'm not sure who the provider is.
View 11 Replies View RelatedA few days ago we upgraded LMS to version 4. It worked fine, but after installing patches and updates from Cisco web, the web interface failed and we haven't been able to restore the service.
Service Temporarily Unavailable.The server is temporarily unable to service your request due to maintenance downtime or capacity problems. [code]
I was having some troubles with the LMS client itself (Any job I started would run forever, never finish, never error out, just "running") so I rebooted the server and after a reboot the web interface show up with a "Service Temporarily Unavailable" "The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later"
View 7 Replies View RelatedI got new internet installed in my apartment, intending to use the same WAP as I did on the old network. The only thing that changed from the old network to the new is the cable modem, which is identical to the old one. Currently, the WAP does not connect to the internet, although I can connect through an ethernet cable to the modem itself. My theory is that the modem is set to a static gateway, while the WAP is not. To try to fix this, I attempted to access the default gateway at 192.168.2.1. Of course, I couldn't remember the stupid password, so I tried different passwords with no results.
Now when I try to access the same IP, it loads for a few minutes, then says 'cannot display the webpage' and gives an option to diagnose connection problems. I know the internet still works, because I can go to any other page I choose. Diagnosis produces the following: 'Your computer appears to be correctly configured, but the device or resource (192.168.2.1) is not responding' (no error code given). Maybe this is a stupid question, but was there a limit to the number of times I could try a password? Additionally, I can't get to 192.168.2.1 on a different computer, on a different network, either. When I try the ipconfig command, the default gateway line comes up blank.