Refers To Location That Is Unavailable

Feb 13, 2012

refers a location that is unavailable.it could beon a hard drive on this computer.

View 1 Replies


ADVERTISEMENT

AAA/Identity/Nac :: ASA5510 Entry For LDAP Object That Refers To Domain Controller

Feb 14, 2013

On our ASA5510 in the area AAA Server Groups, there is an entry for LDAP and an object that refers to our 2003 Domain Controller. This DC has LDAP over SSL enabled and I can see the DN and Password for a domain user account.I've created two new DC's, both R2 2008 but when I enable these in the same way it says it could not authenticate, ERROR auth server not responding, AAA group removed.I thought this had something to do with CA being installed on a DC, but it's not running as a service on the DC that was already referred to.

View 2 Replies View Related

Cisco WAN :: RVS4000 Unavailable Every 30 Min

Apr 13, 2013

2 months ago, I bought a RVS 4000 for my personnal use. I recently had fiber with about 200Mb/s in download and there are no router that can handle such speed so I search online and I found the RVS4000 and the new on RV180 ... My shop near my house only had the RVS4000 so I bought it (even if I know that it had some problem and it was discountinued...). I check all the problem online and it was problem on the VPN part... so I bought it.
 
But since I had it, It seems like my connection was dropping every now and then... so I start to check my installation at home... I check the network error... nothing.. I change my network cable... still the problem...
 
So I called cisco and they send me another one... so I put it back online... and then... same problem... I ask a friend at work, he tried to understand and tell me it was maybe my personnal switch because it was old... so I change it.... but same problem...
 
I start to track my bug...  I found out that there was a hidden telnet available on the RVS4000 so I enable it to see all the process available...
 
I made a linux script to see when the router was unavalaible ... and I found out that it was every 30 min... I was able to have at the same time a "top" command on the router in a shell ...  I found that a process was reaching 100% of cpu use and the loadaverage of the router was increasing from 0 to 5 or 10 sometime... And my laptop was starting to lost packets... (this is normal because the router isn't able to process the connection)...
 
I try all the firmware (old and new) I try also to put the router in factory default state ... same problems...
 
I attached a copy of my screen with the network unavalaible..

So from left to right:
ping 192.168.1.1 (the router)
ping google.fr (from my laptop)
on the top right:
top (on the router)
bottom right:
my script which tells me that if the routeur is avalaible or not

View 1 Replies View Related

Default Gateway Is Unavailable For Laptop

Jan 15, 2013

I've been trying to connect to the internet all day. Every time it connects, but only with limited connectivity. I run troubleshooting, but it doesn't fix the problem. Sometimes it won't have anything to report back other times it says that the default gateway is unavailable. My laptop is the only device in our home that won't connect, so I don't think it's the router.I think the router is a cisco router, there is a cisco box mounted on the ceiling with a cord leading into it (I don't have access to any buttons though)I live in an apartment building with free internet, so I'm not sure who the provider is.

View 11 Replies View Related

Cisco :: LMS 4.0 Service Temporarily Unavailable

Jul 24, 2011

A few days ago we upgraded LMS to version 4. It worked fine, but after installing patches and updates from Cisco web, the web interface failed and we haven't been able to restore the service.
 
Service Temporarily Unavailable.The server is temporarily unable to service your request due to maintenance downtime or capacity problems. [code]

View 2 Replies View Related

Cisco :: LMS 3.2 Service Temporarily Unavailable

May 14, 2012

I was having some troubles with the LMS client itself (Any job I started would run forever, never finish, never error out, just "running") so I rebooted the server and after a reboot the web interface show up with a "Service Temporarily Unavailable" "The server is temporarily unable to service your request due to maintenance downtime or capacity problems.  Please try again later"

View 7 Replies View Related

Wireless :: Prompt Says (Server Is Unavailable At This Time)?

Feb 9, 2011

My Verizon USB connection to the internet, suddenly stopped connecting to napster. Prompt says: "Server is unavailable at this time." No one at Verizon has a clue about fixing the problem, which Napster says is a Verizon connection problem..What to do??

View 1 Replies View Related

Wireless Networks Unavailable After System Recovery?

Feb 4, 2012

I did a System Recovery after my computer had the virus that redirected me to a pop ups and different websites every time. After System Recovery I no longer have internet connection on the computer I used. All the other devices and computer can access my router but not the computer that I've used System Recovery on. I looked at Device Manager and all of my Networking Devices are working properly. I even looked at Wireless Zero Configuration and the Startup type is Automatic and the Service Status is Started.I go into Network Connections and my USB Adapter has an red X on it. I right clicked properties and looked at wireless networks and the preferred networks is grayed out[CODE]

View 3 Replies View Related

Default Gateway Is Unavailable - Cannot Display Webpage

Jul 6, 2011

I got new internet installed in my apartment, intending to use the same WAP as I did on the old network. The only thing that changed from the old network to the new is the cable modem, which is identical to the old one. Currently, the WAP does not connect to the internet, although I can connect through an ethernet cable to the modem itself. My theory is that the modem is set to a static gateway, while the WAP is not. To try to fix this, I attempted to access the default gateway at 192.168.2.1. Of course, I couldn't remember the stupid password, so I tried different passwords with no results.

Now when I try to access the same IP, it loads for a few minutes, then says 'cannot display the webpage' and gives an option to diagnose connection problems. I know the internet still works, because I can go to any other page I choose. Diagnosis produces the following: 'Your computer appears to be correctly configured, but the device or resource (192.168.2.1) is not responding' (no error code given). Maybe this is a stupid question, but was there a limit to the number of times I could try a password? Additionally, I can't get to 192.168.2.1 on a different computer, on a different network, either. When I try the ipconfig command, the default gateway line comes up blank.

View 14 Replies View Related

Toshiba C660D Default Gateway Was Unavailable

Jan 31, 2011

I am using HUAWEI wireless router supplied by Aol and I lose the wireless internet connection quite often. Whenever I click on troubleshoot problems it comes up with: Default gateway was unavailable - Fixed..But then after a couple of minutes the internet goes down again.I Have a Toshiba C660D Laptop With windows 7 and my wireless Router is a HUAWEI EchoLife HG521.

View 4 Replies View Related

Wireless Network Unavailable When Connected To Internet?

Sep 17, 2011

All my other stuff is connected to the internet (PSP, laptop, iPod) wirelessly but my computer can't seem to detect any networks at all.

View 19 Replies View Related

Toshiba Laptop - Default Gateway Is Unavailable?

Apr 26, 2012

I am having issues on my Toshiba laptop... that started late March for about five days then went back to the way it should be. Then it acted up again. The wireless keeps going out, just on mine and my cousin (hers is a compaq along with the other cousin but the other cousin, doesn't have an issue... just me and this little cousin and I don't know why.Its been now happening for a few days. Then I notice it work at night...could it be possible hack?

Tech Support Guy System Info Utility version 1.0.0.2

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II P340 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 2810 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series, 256 Mb
Hard Drives: C: Total - 293442 MB, Free - 222531 MB;
Motherboard: AMD Corp., Guam
Antivirus: Microsoft Security Essentials, Updated and Enabled

View 3 Replies View Related

Unable To Identify Network / Gateway Unavailable

Oct 2, 2011

I've used a newly purchased laptop, Acer Aspire 5733Z-4614 to connect to wireless networks before, including the network I'm currently on (/w another laptop), however, recently it has been unable to go through to the internet, but does successfully connect to the network. The encryption seems to be OK, since both laptops are using the same WPA2-Personal AES, and this (currently connected) laptop does just fine. I've read through a few other articles on this site but haven't been able to pinpoint the problem. To my knowledge I have not changed any settings since it has worked correctly.

[code]...

View 8 Replies View Related

Netgear Mr814v2 Wireless Connection Unavailable

Mar 14, 2011

In control panel networking, I'm getting "Wireless Connection Unavailable". Device Manager reports that the card is working & is enabled. Netgear Configuration panel shows that the card is scanning & transmitting OK but is not receiving a signal. Router wired LAN connections are working OK but it appears that the router is not transmitting.

View 1 Replies View Related

Cisco :: LMS 4.1 WebUI Service Temporarily Unavailable

Nov 14, 2012

environment: LMS 4.1 on Solaris 10 from time to time Web-UI Login is not possilbe showing a message "Service Temporarily Unavailable".Troubleshooting the problem we discovered that lots of TCP-Connections are in CLOSE_WAIT state when WEBUI-Unavailabilty comes up. [code]

View 4 Replies View Related

Vodafone K3765 USB Internet Stick - Disconnected / Unavailable

Jul 11, 2011

I tried to install Vodafone K3765 USB internet stick. I installed the software which came in the flashdrive. With this software I tried to connect to internet but I got error message "The device has been disconnected or is unavailable". I checked in device manager and in two categories this device appeared. Those two categories were "Modem" and "Network Adapter". Why this device comes under two categories plus why I am getting this error message?

View 1 Replies View Related

Cisco VPN :: 3925 - LAN-LAN IPsec Tunnel Command Unavailable

Apr 14, 2011

I'm looking to utilize one of my 3925's to create a LAN-LAN IPsec VPN tunnel with another site.
 
I was under the impression that I needed to get a securityk9 license installed and then I would be good to go.   I got a temporary 60 day trial license and successfully installed it, but none of the commands that I need to create the tunnel are showing up for me.
 
I'm trying to use the "crypto isakmp" command, but that is not showing up: Router(config)#crypto ?   ca   Certification authority   key  Long term key operations   pki  Public Key components
 
Here's my show license:
Index 2 Feature: securityk9
Period left: 633 weeks 4  days
Period Used: 0  minute  0  second
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low

View 7 Replies View Related

Dell :: 7520 Default Gateway Becomes Randomly Unavailable

Jul 11, 2013

I currently have a Dell Inspiron 15R Notebook (Inspiron 7520) with a i5-3210M processor, 6GB DDR3 RAM, and an intel centrino wireless 2230 network adapter. I am running Windows 8My IP is Cox and I have a SURFboard Model : SB6120 with a Netgear N600 router.My problem is that on my laptop only ( other family members have Lenovos with Atheros network adapters) my internet connection will randomly disconnect, and I get the yellow triangle. Usually if I run the troubleshooter, it identifies the problem as the default gateway not being available, and then it fixes the problem temporarily.

View 2 Replies View Related

Unable To Connect To The Internet From Laptop / Default Gateway Unavailable

Jul 14, 2011

I'm unable to connect to the internet from my laptop. When I do a diagnostic test it tells me that the default gateway is not available. I've tried resetting it, resetting my IP address via command prompt, restarting the router, etc.

View 10 Replies View Related

Linksys Wired Router :: BEFSR41 V3 - Dyndns Server Is Unavailable

Dec 29, 2011

I'm currently running a BEFSR41 V3 router with firmware version 1.05.0 It seems that there is no update retry if the dyndns server is temporarely unavailable. Is it possible to initiate an update via command line or is a new firmware update available to solve this issue?

View 1 Replies View Related

Belkin Routers :: Ac900db - Security Unavailable / Unprotecting Wifi

Feb 11, 2013

got the ac900db router set up and the the setup page to allow me to set security is no longer available and i am now unprotected with my wi-fi for a guest login.....website for belkin is a viscious loop that explains NOTHING at all and has no easy way to find how to fix anything!! how do i get to the DASHBOARD or even log back into my account i set up?

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Has Begun To Freeze Up / Web Interface Being Unavailable

Nov 29, 2012

Region : Sweden
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0_1.1_up(120926)
ISP : HessleholmNetwork

My TD-W8968 has begun to freeze up. It had been running for about two hours before this happened. It's a "slow" process that starts with the web interface being unavailable, i'm unable to connect to the modems web interface.And at about the same time it becomes impossible to connect new devices to the wireless network. Right about this point i did a speed test over the modem and performance was abysmal.It was so slow that my web browser believed that it was offline! But i was able to re run the internet speed test once more before it totaly locked up! At this point it was impossible to use the TD-W8968.

This was the,, i don't know,, perhaps the fifth time it happened in a row. It has been running perfect for two months before it began acting up like this.I have done a reset of the modem, didn't solve the problem.I have also done a reflash of the firmware, i've had the latest firmware since i bought the TD-W8968. But the reflash didn't solve it

View 14 Replies View Related

Linksys Wireless Router :: WRT120N Internet Access Policy Unavailable

Sep 27, 2011

My WRT120N router doesn't have Internet Access Policy when I access it.

View 2 Replies View Related

Linksys Wireless Router :: WRT160N Internet Access Policy Unavailable?

Aug 20, 2012

why i can't add a new policy. I can't fillin a policyname or change the status from disable to enable. I have model V2 with firmware v2.0.03 build 007Jul 2, 2009 

View 3 Replies View Related

Cisco Routers :: Rv042 Remote Management Unavailable After Certificate Export

Nov 24, 2011

i was connected to my rv042 via remote management / browser, and tried to add vpn clients. i generated a new certificate and then i clicked on export for clients. by doing this, the remote management disconnected and i cannot access the router anymore.
 
how can i get the new .pem file from remote? do i have to make somebody turn off and on the unit to get back remote access??
 
p.s.: after turning off an on i tried the same steps again: everytime i click on "export for admin" or "export for client", this kills the remote management and the unit must be hardreset. now: how do i get the newly created client certificate off that unit ?? otherwise i will have to drive 350 km just to grep that file ?!?!

View 1 Replies View Related

Cisco AAA/Identity/Nac :: 5520 - Change Shell Profile In ACS / TACACS Server Unavailable

Jan 17, 2012

I have two Nexus 5520 running 5.0(3)N1(1c).
 
I have both boxes heading off to ACS for TACACS lo gin authentication and for command authorization. When I first set things up everything works fine. I have a shell profile configured in ACS with Cisco-av-pair*shell:roles="network-admin" to set the network-admin role. I even have command sets configured to deny the use of configure terminal as I am using switch configuration profiles. Everything runs fine. User lo gins are authenticated by ACS and users have the correct command set applied to them.
 
The problem comes when I make a change to a shell profile in ACS. Even something as simple as changing the name of a shell profile causes the 5520's to crash as soon as I try to log on. If I unplug the management link so that the TACACS server is unavailable I can log on fine with the local admin user.
 
The NEXUS console reports this error. (amongst many others)
 
EDNAM-NEXUS-2 %$ VDC-1 %$ %SYSMGR-2-SERVICE_CRASHED: Service "Tacacs Daemon" (PID 4331) hasn't caught signal 11 (core will be saved).
 
A show system reset-reason shows:
 
EDNAM-NEXUS-2# sh system reset-reason
----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---
1) At 389 usecs after Wed Jan 18 12:32:49 2012
    Reason: Reset triggered due to HA policy of Reset
    Service: Tacacs Daemon hap reset
    Version: 5.0(3)N1(1c)

Could this be a bug with Nexus/ACS?

View 3 Replies View Related

Linksys Wireless Router :: E4200 Media Server Becomes Unavailable Most Of Time / Renders Device Useless

Feb 6, 2011

I have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
 
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.

View 9 Replies View Related

Home IP At Another Location

Dec 29, 2012

I can only access a server for my work with the IP I have at home. Is there any way I can be at another location and somehow get to that server with the home IP? I suppose I would have to set up a proxy at home and then connect to it from the other location, so it would make no difference to the server if I'm somewhere else? Am I thinking in the right direction? How would I set that up?

View 7 Replies View Related

Getting A New IP Address And Location?

Aug 16, 2011

Bell gives my and IP address and if I reset my modem I will get a new one. Take for example I have an IP address at 7:30pm and decided to reset my modem at 8:00pm. I now have a new IP address, will my previous address, the one I had at 7:30pm, will that one be able to be traced back to me in anyway, can any of my previous addresses be traced back to me in anyway?

View 1 Replies View Related

FTP Disconnects In One Location But Works In Other

Aug 20, 2011

When I try to upload one file through FTP client to a server, it shows error similar to "you are disconnected by remote host" or something like that. It happens only in work place. When I try the same from home it connects successfully. What could be the problem?

View 1 Replies View Related

Check Others IP Address And Location?

Sep 4, 2011

How do I check IP address of others, when in chatting or playing online game, I could only know that he is Mr. X from YZA country which appears on Screen, But I also know he is using with wrong name and wrong Country name.I would to check his IP as well as his Place?

View 1 Replies View Related

Network Location Cannot Reached

Sep 16, 2012

in windows 7 pro, While trying to join domain xxxx.local, error message appears. even ping xxxx.local is working...

View 4 Replies View Related

How To Know Geographical Location Of Web Server

Sep 5, 2011

Does any one know how i know where my server who is hosting my IP is gepgraphically located?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved