Cisco WAN :: RVS4000 Unavailable Every 30 Min
Apr 13, 2013
2 months ago, I bought a RVS 4000 for my personnal use. I recently had fiber with about 200Mb/s in download and there are no router that can handle such speed so I search online and I found the RVS4000 and the new on RV180 ... My shop near my house only had the RVS4000 so I bought it (even if I know that it had some problem and it was discountinued...). I check all the problem online and it was problem on the VPN part... so I bought it.
But since I had it, It seems like my connection was dropping every now and then... so I start to check my installation at home... I check the network error... nothing.. I change my network cable... still the problem...
So I called cisco and they send me another one... so I put it back online... and then... same problem... I ask a friend at work, he tried to understand and tell me it was maybe my personnal switch because it was old... so I change it.... but same problem...
I start to track my bug... I found out that there was a hidden telnet available on the RVS4000 so I enable it to see all the process available...
I made a linux script to see when the router was unavalaible ... and I found out that it was every 30 min... I was able to have at the same time a "top" command on the router in a shell ... I found that a process was reaching 100% of cpu use and the loadaverage of the router was increasing from 0 to 5 or 10 sometime... And my laptop was starting to lost packets... (this is normal because the router isn't able to process the connection)...
I try all the firmware (old and new) I try also to put the router in factory default state ... same problems...
I attached a copy of my screen with the network unavalaible..
So from left to right:
ping 192.168.1.1 (the router)
ping google.fr (from my laptop)
on the top right:
top (on the router)
bottom right:
my script which tells me that if the routeur is avalaible or not
View 1 Replies
ADVERTISEMENT
Jul 24, 2011
A few days ago we upgraded LMS to version 4. It worked fine, but after installing patches and updates from Cisco web, the web interface failed and we haven't been able to restore the service.
Service Temporarily Unavailable.The server is temporarily unable to service your request due to maintenance downtime or capacity problems. [code]
View 2 Replies
View Related
May 14, 2012
I was having some troubles with the LMS client itself (Any job I started would run forever, never finish, never error out, just "running") so I rebooted the server and after a reboot the web interface show up with a "Service Temporarily Unavailable" "The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later"
View 7 Replies
View Related
Feb 13, 2012
refers a location that is unavailable.it could beon a hard drive on this computer.
View 1 Replies
View Related
Nov 14, 2012
environment: LMS 4.1 on Solaris 10 from time to time Web-UI Login is not possilbe showing a message "Service Temporarily Unavailable".Troubleshooting the problem we discovered that lots of TCP-Connections are in CLOSE_WAIT state when WEBUI-Unavailabilty comes up. [code]
View 4 Replies
View Related
Jan 15, 2013
I've been trying to connect to the internet all day. Every time it connects, but only with limited connectivity. I run troubleshooting, but it doesn't fix the problem. Sometimes it won't have anything to report back other times it says that the default gateway is unavailable. My laptop is the only device in our home that won't connect, so I don't think it's the router.I think the router is a cisco router, there is a cisco box mounted on the ceiling with a cord leading into it (I don't have access to any buttons though)I live in an apartment building with free internet, so I'm not sure who the provider is.
View 11 Replies
View Related
Apr 14, 2011
I'm looking to utilize one of my 3925's to create a LAN-LAN IPsec VPN tunnel with another site.
I was under the impression that I needed to get a securityk9 license installed and then I would be good to go. I got a temporary 60 day trial license and successfully installed it, but none of the commands that I need to create the tunnel are showing up for me.
I'm trying to use the "crypto isakmp" command, but that is not showing up: Router(config)#crypto ? ca Certification authority key Long term key operations pki Public Key components
Here's my show license:
Index 2 Feature: securityk9
Period left: 633 weeks 4 days
Period Used: 0 minute 0 second
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
View 7 Replies
View Related
Feb 9, 2011
My Verizon USB connection to the internet, suddenly stopped connecting to napster. Prompt says: "Server is unavailable at this time." No one at Verizon has a clue about fixing the problem, which Napster says is a Verizon connection problem..What to do??
View 1 Replies
View Related
Feb 4, 2012
I did a System Recovery after my computer had the virus that redirected me to a pop ups and different websites every time. After System Recovery I no longer have internet connection on the computer I used. All the other devices and computer can access my router but not the computer that I've used System Recovery on. I looked at Device Manager and all of my Networking Devices are working properly. I even looked at Wireless Zero Configuration and the Startup type is Automatic and the Service Status is Started.I go into Network Connections and my USB Adapter has an red X on it. I right clicked properties and looked at wireless networks and the preferred networks is grayed out[CODE]
View 3 Replies
View Related
Jul 6, 2011
I got new internet installed in my apartment, intending to use the same WAP as I did on the old network. The only thing that changed from the old network to the new is the cable modem, which is identical to the old one. Currently, the WAP does not connect to the internet, although I can connect through an ethernet cable to the modem itself. My theory is that the modem is set to a static gateway, while the WAP is not. To try to fix this, I attempted to access the default gateway at 192.168.2.1. Of course, I couldn't remember the stupid password, so I tried different passwords with no results.
Now when I try to access the same IP, it loads for a few minutes, then says 'cannot display the webpage' and gives an option to diagnose connection problems. I know the internet still works, because I can go to any other page I choose. Diagnosis produces the following: 'Your computer appears to be correctly configured, but the device or resource (192.168.2.1) is not responding' (no error code given). Maybe this is a stupid question, but was there a limit to the number of times I could try a password? Additionally, I can't get to 192.168.2.1 on a different computer, on a different network, either. When I try the ipconfig command, the default gateway line comes up blank.
View 14 Replies
View Related
Jan 31, 2011
I am using HUAWEI wireless router supplied by Aol and I lose the wireless internet connection quite often. Whenever I click on troubleshoot problems it comes up with: Default gateway was unavailable - Fixed..But then after a couple of minutes the internet goes down again.I Have a Toshiba C660D Laptop With windows 7 and my wireless Router is a HUAWEI EchoLife HG521.
View 4 Replies
View Related
Sep 17, 2011
All my other stuff is connected to the internet (PSP, laptop, iPod) wirelessly but my computer can't seem to detect any networks at all.
View 19 Replies
View Related
Apr 26, 2012
I am having issues on my Toshiba laptop... that started late March for about five days then went back to the way it should be. Then it acted up again. The wireless keeps going out, just on mine and my cousin (hers is a compaq along with the other cousin but the other cousin, doesn't have an issue... just me and this little cousin and I don't know why.Its been now happening for a few days. Then I notice it work at night...could it be possible hack?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II P340 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 2810 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series, 256 Mb
Hard Drives: C: Total - 293442 MB, Free - 222531 MB;
Motherboard: AMD Corp., Guam
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 3 Replies
View Related
Oct 2, 2011
I've used a newly purchased laptop, Acer Aspire 5733Z-4614 to connect to wireless networks before, including the network I'm currently on (/w another laptop), however, recently it has been unable to go through to the internet, but does successfully connect to the network. The encryption seems to be OK, since both laptops are using the same WPA2-Personal AES, and this (currently connected) laptop does just fine. I've read through a few other articles on this site but haven't been able to pinpoint the problem. To my knowledge I have not changed any settings since it has worked correctly.
[code]...
View 8 Replies
View Related
Mar 14, 2011
In control panel networking, I'm getting "Wireless Connection Unavailable". Device Manager reports that the card is working & is enabled. Netgear Configuration panel shows that the card is scanning & transmitting OK but is not receiving a signal. Router wired LAN connections are working OK but it appears that the router is not transmitting.
View 1 Replies
View Related
Jul 11, 2011
I tried to install Vodafone K3765 USB internet stick. I installed the software which came in the flashdrive. With this software I tried to connect to internet but I got error message "The device has been disconnected or is unavailable". I checked in device manager and in two categories this device appeared. Those two categories were "Modem" and "Network Adapter". Why this device comes under two categories plus why I am getting this error message?
View 1 Replies
View Related
Jul 11, 2013
I currently have a Dell Inspiron 15R Notebook (Inspiron 7520) with a i5-3210M processor, 6GB DDR3 RAM, and an intel centrino wireless 2230 network adapter. I am running Windows 8My IP is Cox and I have a SURFboard Model : SB6120 with a Netgear N600 router.My problem is that on my laptop only ( other family members have Lenovos with Atheros network adapters) my internet connection will randomly disconnect, and I get the yellow triangle. Usually if I run the troubleshooter, it identifies the problem as the default gateway not being available, and then it fixes the problem temporarily.
View 2 Replies
View Related
Nov 24, 2011
i was connected to my rv042 via remote management / browser, and tried to add vpn clients. i generated a new certificate and then i clicked on export for clients. by doing this, the remote management disconnected and i cannot access the router anymore.
how can i get the new .pem file from remote? do i have to make somebody turn off and on the unit to get back remote access??
p.s.: after turning off an on i tried the same steps again: everytime i click on "export for admin" or "export for client", this kills the remote management and the unit must be hardreset. now: how do i get the newly created client certificate off that unit ?? otherwise i will have to drive 350 km just to grep that file ?!?!
View 1 Replies
View Related
Jul 14, 2011
I'm unable to connect to the internet from my laptop. When I do a diagnostic test it tells me that the default gateway is not available. I've tried resetting it, resetting my IP address via command prompt, restarting the router, etc.
View 10 Replies
View Related
Dec 29, 2011
I'm currently running a BEFSR41 V3 router with firmware version 1.05.0 It seems that there is no update retry if the dyndns server is temporarely unavailable. Is it possible to initiate an update via command line or is a new firmware update available to solve this issue?
View 1 Replies
View Related
Feb 11, 2013
got the ac900db router set up and the the setup page to allow me to set security is no longer available and i am now unprotected with my wi-fi for a guest login.....website for belkin is a viscious loop that explains NOTHING at all and has no easy way to find how to fix anything!! how do i get to the DASHBOARD or even log back into my account i set up?
View 1 Replies
View Related
Jan 17, 2012
I have two Nexus 5520 running 5.0(3)N1(1c).
I have both boxes heading off to ACS for TACACS lo gin authentication and for command authorization. When I first set things up everything works fine. I have a shell profile configured in ACS with Cisco-av-pair*shell:roles="network-admin" to set the network-admin role. I even have command sets configured to deny the use of configure terminal as I am using switch configuration profiles. Everything runs fine. User lo gins are authenticated by ACS and users have the correct command set applied to them.
The problem comes when I make a change to a shell profile in ACS. Even something as simple as changing the name of a shell profile causes the 5520's to crash as soon as I try to log on. If I unplug the management link so that the TACACS server is unavailable I can log on fine with the local admin user.
The NEXUS console reports this error. (amongst many others)
EDNAM-NEXUS-2 %$ VDC-1 %$ %SYSMGR-2-SERVICE_CRASHED: Service "Tacacs Daemon" (PID 4331) hasn't caught signal 11 (core will be saved).
A show system reset-reason shows:
EDNAM-NEXUS-2# sh system reset-reason
----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---
1) At 389 usecs after Wed Jan 18 12:32:49 2012
Reason: Reset triggered due to HA policy of Reset
Service: Tacacs Daemon hap reset
Version: 5.0(3)N1(1c)
Could this be a bug with Nexus/ACS?
View 3 Replies
View Related
Nov 29, 2012
Region : Sweden
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0_1.1_up(120926)
ISP : HessleholmNetwork
My TD-W8968 has begun to freeze up. It had been running for about two hours before this happened. It's a "slow" process that starts with the web interface being unavailable, i'm unable to connect to the modems web interface.And at about the same time it becomes impossible to connect new devices to the wireless network. Right about this point i did a speed test over the modem and performance was abysmal.It was so slow that my web browser believed that it was offline! But i was able to re run the internet speed test once more before it totaly locked up! At this point it was impossible to use the TD-W8968.
This was the,, i don't know,, perhaps the fifth time it happened in a row. It has been running perfect for two months before it began acting up like this.I have done a reset of the modem, didn't solve the problem.I have also done a reflash of the firmware, i've had the latest firmware since i bought the TD-W8968. But the reflash didn't solve it
View 14 Replies
View Related
Sep 27, 2011
My WRT120N router doesn't have Internet Access Policy when I access it.
View 2 Replies
View Related
Aug 20, 2012
why i can't add a new policy. I can't fillin a policyname or change the status from disable to enable. I have model V2 with firmware v2.0.03 build 007Jul 2, 2009
View 3 Replies
View Related
Feb 6, 2011
I have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.
View 9 Replies
View Related
Nov 18, 2010
how to configure a VPN with two RVS4000?
View 2 Replies
View Related
Apr 20, 2013
Ive set up a rvs4000 with two vlans, one as a bussiness network and the other as a guest network. Everything works fine and the networks can not see each other. I would like to add wifi and I would like to do so with keeping both networks separate. I have a used 1130AG access point and was wondering if I could use this single AP for both networks. If so, how would I go about doing so? Is there a better suited AP for my needs?
View 4 Replies
View Related
Dec 15, 2011
an RVS4000 shall establish a pptp VPN connection. The router is connected trough its WAN port to the first router which connects to the internet.
The PPTP VPN connection cannot be established but the pptp server can be pinged from the VPN router. Login data and password is OK. Connection can be established from a win7 computer without any problem.
View 3 Replies
View Related
May 16, 2012
I have an RVS4000 running V2.0.2.7 firmware that gives me an "Invalid Character(s) Found" error message when I try to edit an existing ACL.
I'm trying to deploy 57 of these routers and would like to be able to use a pre-built config dropped onto each router.
I initially planned on editing the exported config with a find&replace for my local LAN addresses. Since that didn't work the next reasonable solution would be to edit the ACL list (much more tedious, but still better than hand-entering every ACL on all 57 devices).
when this bug will be addressed? Alternatively, if there is an offline configuration editing tool I would be one happy camper to have it!
View 2 Replies
View Related
May 26, 2013
In the past a used an RVS4000 as a VPN server for my company, but since I recently moved my company to China I would like to use it for a different purpose if it's possible. What I would like to do is the following:
Use an ADSL router to create a LAN networkConnect my RVS4000 to the ADLS router and use it as a switch instead of a routerUse the RVS4000 to connect to a VPN server abroad over L2TP or PPTP . This would allow me to enjoy the best of 2 worlds:
Enjoy the full broadband speed of the LAN network created by the ADSL router for normal internet useHave a separate wired connection permanently connected to VPN giving access to company email etc... My question is: Is this actually possible?
Can the RVS4000 be used as a switch?When used as a switch, can the RVS4000 still be used a 'VPN receiver'? I'm possible trying to do the impossible, because I would have to have the ADSL router have to act as a DHCP server and disable DHCP on my RVS4000 in which case it is probably impossible to have the RVS4000 act as an L2TP/PPTP VPN receiver.
View 1 Replies
View Related
Jun 3, 2013
I have an RVS4000, not installed. How can I tell from the unit or the packaging that it is a v1 or a v2, without installing and switching it on (which I don't want to do now) ? Are v1 branded Linsys and v2 Cisco ? Can you tell from the date on the package (mine says copyright 2011) ?
View 1 Replies
View Related
Sep 4, 2011
I don't know if my vendor mislead me, but I need to do this: There is a public subnet in my office, not a 192.168.x.x, but a real Public IP.The reason is that we do VOIP and those are only servers. I installed a RVS 4000 in that location, and assigned a PUBLIC Ip to BOTH the WAN and LAN, since when I connect from outside, using either QickVPN or another identical router, I need to be assigned one of the PUBLIC Ip's on the remote LAN. That is the whole idea of the project, to locate servers remotely and make them use our set of PUBLIC IP's. Well, so far I cannot connect either with the Quick VPN client, or using the VPN Wizard. It goes and creates the tunnel, without error, but when I click test, it fails.
View 2 Replies
View Related
