Wireless Networks Unavailable After System Recovery?
Feb 4, 2012
I did a System Recovery after my computer had the virus that redirected me to a pop ups and different websites every time. After System Recovery I no longer have internet connection on the computer I used. All the other devices and computer can access my router but not the computer that I've used System Recovery on. I looked at Device Manager and all of my Networking Devices are working properly. I even looked at Wireless Zero Configuration and the Startup type is Automatic and the Service Status is Started.I go into Network Connections and my USB Adapter has an red X on it. I right clicked properties and looked at wireless networks and the preferred networks is grayed out[CODE]
View 3 Replies
ADVERTISEMENT
Aug 23, 2012
How is-it possible to do a recovery password for sysadmin on ADE-OS ?We're using LMS 4.2.1 and my customer doesn't remember the username and password created during installation.We have the admin user for the https connection.
View 4 Replies
View Related
May 1, 2012
i need to recover a router Cisco 2801. I lost the password and the "no service password-recovery" is configured. I have done many attempts with the procedure in this link :URL
View 9 Replies
View Related
Feb 9, 2011
My Verizon USB connection to the internet, suddenly stopped connecting to napster. Prompt says: "Server is unavailable at this time." No one at Verizon has a clue about fixing the problem, which Napster says is a Verizon connection problem..What to do??
View 1 Replies
View Related
Sep 17, 2011
All my other stuff is connected to the internet (PSP, laptop, iPod) wirelessly but my computer can't seem to detect any networks at all.
View 19 Replies
View Related
Mar 14, 2011
In control panel networking, I'm getting "Wireless Connection Unavailable". Device Manager reports that the card is working & is enabled. Netgear Configuration panel shows that the card is scanning & transmitting OK but is not receiving a signal. Router wired LAN connections are working OK but it appears that the router is not transmitting.
View 1 Replies
View Related
Nov 29, 2012
Region : Sweden
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0_1.1_up(120926)
ISP : HessleholmNetwork
My TD-W8968 has begun to freeze up. It had been running for about two hours before this happened. It's a "slow" process that starts with the web interface being unavailable, i'm unable to connect to the modems web interface.And at about the same time it becomes impossible to connect new devices to the wireless network. Right about this point i did a speed test over the modem and performance was abysmal.It was so slow that my web browser believed that it was offline! But i was able to re run the internet speed test once more before it totaly locked up! At this point it was impossible to use the TD-W8968.
This was the,, i don't know,, perhaps the fifth time it happened in a row. It has been running perfect for two months before it began acting up like this.I have done a reset of the modem, didn't solve the problem.I have also done a reflash of the firmware, i've had the latest firmware since i bought the TD-W8968. But the reflash didn't solve it
View 14 Replies
View Related
Sep 27, 2011
My WRT120N router doesn't have Internet Access Policy when I access it.
View 2 Replies
View Related
Aug 20, 2012
why i can't add a new policy. I can't fillin a policyname or change the status from disable to enable. I have model V2 with firmware v2.0.03 build 007Jul 2, 2009
View 3 Replies
View Related
Feb 6, 2011
I have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.
View 9 Replies
View Related
Feb 13, 2012
refers a location that is unavailable.it could beon a hard drive on this computer.
View 1 Replies
View Related
Apr 13, 2013
2 months ago, I bought a RVS 4000 for my personnal use. I recently had fiber with about 200Mb/s in download and there are no router that can handle such speed so I search online and I found the RVS4000 and the new on RV180 ... My shop near my house only had the RVS4000 so I bought it (even if I know that it had some problem and it was discountinued...). I check all the problem online and it was problem on the VPN part... so I bought it.
But since I had it, It seems like my connection was dropping every now and then... so I start to check my installation at home... I check the network error... nothing.. I change my network cable... still the problem...
So I called cisco and they send me another one... so I put it back online... and then... same problem... I ask a friend at work, he tried to understand and tell me it was maybe my personnal switch because it was old... so I change it.... but same problem...
I start to track my bug... I found out that there was a hidden telnet available on the RVS4000 so I enable it to see all the process available...
I made a linux script to see when the router was unavalaible ... and I found out that it was every 30 min... I was able to have at the same time a "top" command on the router in a shell ... I found that a process was reaching 100% of cpu use and the loadaverage of the router was increasing from 0 to 5 or 10 sometime... And my laptop was starting to lost packets... (this is normal because the router isn't able to process the connection)...
I try all the firmware (old and new) I try also to put the router in factory default state ... same problems...
I attached a copy of my screen with the network unavalaible..
So from left to right:
ping 192.168.1.1 (the router)
ping google.fr (from my laptop)
on the top right:
top (on the router)
bottom right:
my script which tells me that if the routeur is avalaible or not
View 1 Replies
View Related
Jan 15, 2013
I've been trying to connect to the internet all day. Every time it connects, but only with limited connectivity. I run troubleshooting, but it doesn't fix the problem. Sometimes it won't have anything to report back other times it says that the default gateway is unavailable. My laptop is the only device in our home that won't connect, so I don't think it's the router.I think the router is a cisco router, there is a cisco box mounted on the ceiling with a cord leading into it (I don't have access to any buttons though)I live in an apartment building with free internet, so I'm not sure who the provider is.
View 11 Replies
View Related
Jul 24, 2011
A few days ago we upgraded LMS to version 4. It worked fine, but after installing patches and updates from Cisco web, the web interface failed and we haven't been able to restore the service.
Service Temporarily Unavailable.The server is temporarily unable to service your request due to maintenance downtime or capacity problems. [code]
View 2 Replies
View Related
May 14, 2012
I was having some troubles with the LMS client itself (Any job I started would run forever, never finish, never error out, just "running") so I rebooted the server and after a reboot the web interface show up with a "Service Temporarily Unavailable" "The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later"
View 7 Replies
View Related
Apr 26, 2012
MSE can not boot.MSE show error log. [code] How to recovery MSE 3310,I find in documents not show method recovery. Any solution recovery MSE 3310
View 2 Replies
View Related
Jul 6, 2011
I got new internet installed in my apartment, intending to use the same WAP as I did on the old network. The only thing that changed from the old network to the new is the cable modem, which is identical to the old one. Currently, the WAP does not connect to the internet, although I can connect through an ethernet cable to the modem itself. My theory is that the modem is set to a static gateway, while the WAP is not. To try to fix this, I attempted to access the default gateway at 192.168.2.1. Of course, I couldn't remember the stupid password, so I tried different passwords with no results.
Now when I try to access the same IP, it loads for a few minutes, then says 'cannot display the webpage' and gives an option to diagnose connection problems. I know the internet still works, because I can go to any other page I choose. Diagnosis produces the following: 'Your computer appears to be correctly configured, but the device or resource (192.168.2.1) is not responding' (no error code given). Maybe this is a stupid question, but was there a limit to the number of times I could try a password? Additionally, I can't get to 192.168.2.1 on a different computer, on a different network, either. When I try the ipconfig command, the default gateway line comes up blank.
View 14 Replies
View Related
Jan 31, 2011
I am using HUAWEI wireless router supplied by Aol and I lose the wireless internet connection quite often. Whenever I click on troubleshoot problems it comes up with: Default gateway was unavailable - Fixed..But then after a couple of minutes the internet goes down again.I Have a Toshiba C660D Laptop With windows 7 and my wireless Router is a HUAWEI EchoLife HG521.
View 4 Replies
View Related
Apr 26, 2012
I am having issues on my Toshiba laptop... that started late March for about five days then went back to the way it should be. Then it acted up again. The wireless keeps going out, just on mine and my cousin (hers is a compaq along with the other cousin but the other cousin, doesn't have an issue... just me and this little cousin and I don't know why.Its been now happening for a few days. Then I notice it work at night...could it be possible hack?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II P340 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 2810 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series, 256 Mb
Hard Drives: C: Total - 293442 MB, Free - 222531 MB;
Motherboard: AMD Corp., Guam
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 3 Replies
View Related
Oct 2, 2011
I've used a newly purchased laptop, Acer Aspire 5733Z-4614 to connect to wireless networks before, including the network I'm currently on (/w another laptop), however, recently it has been unable to go through to the internet, but does successfully connect to the network. The encryption seems to be OK, since both laptops are using the same WPA2-Personal AES, and this (currently connected) laptop does just fine. I've read through a few other articles on this site but haven't been able to pinpoint the problem. To my knowledge I have not changed any settings since it has worked correctly.
[code]...
View 8 Replies
View Related
Nov 14, 2012
environment: LMS 4.1 on Solaris 10 from time to time Web-UI Login is not possilbe showing a message "Service Temporarily Unavailable".Troubleshooting the problem we discovered that lots of TCP-Connections are in CLOSE_WAIT state when WEBUI-Unavailabilty comes up. [code]
View 4 Replies
View Related
Jun 19, 2012
Where is the link to download recovery IOS for AP1130AG.
View 4 Replies
View Related
Jul 11, 2011
I tried to install Vodafone K3765 USB internet stick. I installed the software which came in the flashdrive. With this software I tried to connect to internet but I got error message "The device has been disconnected or is unavailable". I checked in device manager and in two categories this device appeared. Those two categories were "Modem" and "Network Adapter". Why this device comes under two categories plus why I am getting this error message?
View 1 Replies
View Related
Apr 14, 2011
I'm looking to utilize one of my 3925's to create a LAN-LAN IPsec VPN tunnel with another site.
I was under the impression that I needed to get a securityk9 license installed and then I would be good to go. I got a temporary 60 day trial license and successfully installed it, but none of the commands that I need to create the tunnel are showing up for me.
I'm trying to use the "crypto isakmp" command, but that is not showing up: Router(config)#crypto ? ca Certification authority key Long term key operations pki Public Key components
Here's my show license:
Index 2 Feature: securityk9
Period left: 633 weeks 4 days
Period Used: 0 minute 0 second
License Type: Evaluation
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
View 7 Replies
View Related
Jul 11, 2013
I currently have a Dell Inspiron 15R Notebook (Inspiron 7520) with a i5-3210M processor, 6GB DDR3 RAM, and an intel centrino wireless 2230 network adapter. I am running Windows 8My IP is Cox and I have a SURFboard Model : SB6120 with a Netgear N600 router.My problem is that on my laptop only ( other family members have Lenovos with Atheros network adapters) my internet connection will randomly disconnect, and I get the yellow triangle. Usually if I run the troubleshooter, it identifies the problem as the default gateway not being available, and then it fixes the problem temporarily.
View 2 Replies
View Related
Jul 20, 2008
how to password recovery Wireless LAN Controller 4402
View 3 Replies
View Related
Jul 9, 2012
I have upgraded my new WLC to version 7.0.98.218. I noticed the N/A for the Field recovery version. On my old 4402 it is called the Emergency Image Version, and it is 5.2.157.0
How do i get a recovery version on the WLC?
View 2 Replies
View Related
Mar 14, 2013
My questions is in relation to disaster recovery, for wireless. We have our main data center, in the US, with two 5508 controllers. We have a DR location, in Europe, with two 5508 controller. We're upgrading our 5508's to the 7.4 code, so that we can take advantage of the RP port for our controllers. With that said, is there a way to make the US and Europe controllers redundant?
If there's a disaster, in the US, would the AP licensing, and AP's attach to the European controllers? Our AP's are set up with HA. I'm more concerned about the licensing flipping over to the DR controllers. I've tried researching this topic, and can't really find anything on it.
View 4 Replies
View Related
Jul 14, 2011
I'm unable to connect to the internet from my laptop. When I do a diagnostic test it tells me that the default gateway is not available. I've tried resetting it, resetting my IP address via command prompt, restarting the router, etc.
View 10 Replies
View Related
Dec 29, 2011
I'm currently running a BEFSR41 V3 router with firmware version 1.05.0 It seems that there is no update retry if the dyndns server is temporarely unavailable. Is it possible to initiate an update via command line or is a new firmware update available to solve this issue?
View 1 Replies
View Related
Feb 11, 2013
got the ac900db router set up and the the setup page to allow me to set security is no longer available and i am now unprotected with my wi-fi for a guest login.....website for belkin is a viscious loop that explains NOTHING at all and has no easy way to find how to fix anything!! how do i get to the DASHBOARD or even log back into my account i set up?
View 1 Replies
View Related
Mar 18, 2012
I have an Aironet 1231G that I'm trying to recover an image on. I'm following the cisco directions of reloading the AP image file from an active TFTP server (which is myPC). My PC has a static ip address of 10.0.0.2 with the TFTP server running. I've verfied that the TFTP server works by upgrading a switch IOS.The issue I'm encountering is the 1231G does not see the TFTP server correctly. url...
View 2 Replies
View Related
Jul 2, 2012
I am connected to my TP-Link Wireless N AP via wireless on my laptop. The AP is set to the Wireless AP config but I have forgotten the wireless key i defined when i configured Wireless AP, so therefor cannot successfully connect any other device to the network. The key has been saved on the computer its connected to via wireless (my laptop) and I was wodering if i could use this fact or any other method of recovering the key? I am using Win Vista on this system.
View 3 Replies
View Related