So I just setup a new router and got everything up and running...I got every wifi device connected, my iphone, ps3, laptop..except one laptop.Its a Windows Vista laptop, I can connect to the network but I cant receive bytes or load web pages. I can connect to the network but not the World, its blocked by an X...I dont know if vista laptop has the same ip as another device.. Cisco E1000
View 14 RepliesWas told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 2 Replies View RelatedWas told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
View 3 Replies View RelatedI have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.
View 2 Replies View Relatedi have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies View RelatedOne day I got a blue screen saying there was a hardware or driver failure with the network adapter on the motherboard. I couldn't resolve the problem so I went out and got a new network adaptor. Pluged it in, windows found drivers for it. But I was getting a Unidentified network problem.I have a Linksys E1000 router, internet works on my laptop and xbox360 fine wired and wireless. So I changed ports on the router, changed cables, even changed routers. Still the PC wasn't seeing the router. So I download the latest drivers for the Realtek network adapter, install them, still nothing. So I thought maybe the router is to blame, downloaded the latest firmware and flashed it onto the router, reset it. Still the same. At this point I was sure the new network card was faulty. So I took the computer to the shop where i bought the card. He disabled the old network adapter in the bios. And he had the Internet up and running in the shop. I was happy and took it home... Still the same problem! Rang ISP done a lot of disabling, enabling, static IP no fix... except he told me to bypass the router and try plugging the PC directly to the modem, and that connects fine. I can get internet from the modem, but not through the router, yet everything else works fine though the router. As I said cables and ports in the router have all been changed and checked. When I do the network diagnostics in windows 7 is says, does not have a valid IP configuration.
View 19 Replies View RelatedI can setup my router with the cd
View 1 Replies View RelatedI'm trying to set up my E1000 router and when I run the Cisco Connect software that came with the router I get a message that says that it can't find the router, I've tried running it with my computer connected to the router and not connected. I've looked through the FAQ section and didn't really find anything. I'm trying to set it up on a laptop, it's a Vaio running Windows 7, I don't if that makes any difference.
View 7 Replies View RelatedI have two computers. My host computer runs Windows 7 64-Bit. Last December I upgraded from Home Premium to Ultimate, which may have changed my configurations though a month before I had to do a complete reinstall of the Home Premium before I acquired the upgrade. My remote computer is XP-Pro. The HP connection is wireless. There is no problem printing; but to use some features the HP on its control panel requires me to enter a proxy address. How can I configure my router settings to fully use the HP web services? At this point, the HP doesn't even update. I cannot access things like apps, ePrint and other web printing functions because of this sudden need for a proxy connection. It doesn't even show the email address for the device.
View 9 Replies View RelatedThe router was working fine when it was setup but was disconnected for a short while. There is now no recognition of the router and the install cd was misplaced...
View 2 Replies View Relatedi recently had to wipe hardrive of my laptop and am having trouble getting hooked back up to my linksys E/1000 , who can i contact about getting password and network name
View 2 Replies View RelatedI just got E1000 cisco wireless router. Started setup, everything worked fine and replaced admin password with my own. For some reason got error message. tried to redo setup and got message router not recognized. used laptop and found out that wireless works fine. After few days noticed that there is a (mynetworkname) guest connection you can connect without any password. i don't need that stupid thing and my question is how to disable guest network? I cannot reach Main Menu from cd and have no idea where to look for it when i connect to router by web.
View 9 Replies View RelatedI have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
View 3 Replies View RelatedI used Cisco connect to set up guest access with a secure password. Cisco Connect now indicates guess access is allowed and shows the password. However, when I actually try to connect to the guest network, it shows no security at all, and I can join the network without a password.
View 1 Replies View RelatedI have a linksys E1000 and cannot connect to my wireless network. what is supposed to plug in where in the back of the router?
View 2 Replies View RelatedSo, with the latest firmware update I could add a second e4200 to my network to use as a bridge or access point? What I need is another device in my living room that can pick up the wireless signal and dish out network connectivity to my receiver, xbox360, and ps3. With the new firmware update can this be done with a second e4200? How does one connect to each e4200 on the network for setup (dohave to change the default ip address of 1?)I just bought a trendnet TEW-687GA 450 mb/s wireless gaming adapter and a trendnet 5 port switch to accomplish what I mentioned above. I'm just wondering if there is an advantage to switching over to two e4200's. The trendnet adapater does not have a 5ghz channel.
View 2 Replies View RelatedHow do I setup a WRT160N as a wireless adapter to connect a wireless printer to my network? I do not use the wrt 160 as a router because I have an AT&T router for u-verse connection. Also, I physically cannot wire the printer to the main router (opposite corners of the house).
View 2 Replies View RelatedMy modem CAN connect to the Internet but my router CANNOT. I've called my ISP (Brighthouse) and went through a whole process of bypassing the router, restarting the modem for 2 minutes, and restarting the router for 30 seconds. Then I even got assistance from the router's maker (Linksys) by switching the IP address of the router, they said this could be the issue if my modem had the same IP address. I switched it to 192.168.2.1, but still no luck. I do not know what to do now. The new router is a Linksys E1000. I haven't got the specs of my modem yet.
View 3 Replies View RelatedI can browse the internet just fine with no issues but when I try to access Cisco Connect (I have Linskys E1000 and Mac OS X) it says "you can only access your router settings when you are connected to your router." I don't know what the issue is. The only reason I need to access the settings is because I have been recently been having issues connecting to the internet from my Playstation 3.
View 1 Replies View RelatedI own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?
View 2 Replies View RelatedE1000. Setup Acer laptop with router and it is working fine. However I do not have Cisco Connect on the computer. I would like to use it to connect other devices etc.
View 1 Replies View RelatedI have a Cisco E1000 wireless N router. It is working fine. I have just completed wiping my HD and reinstalling WinXP and other software. But I also need Cisco Connect. It appears the only way to get it installed is to run the Cisco Setup program. But since the router is working fine, I don't want to mess with the setup. Is there any way to get Cisco Connect by download? Or get it off my install CD without running the setup program?
View 2 Replies View RelatedI recently bought a new router but I'm having issues with it. We have 2 Laptops in our house and 1 (windows 7) can connect to the router and get internet access but the other (windows vista) can't it says that the Cisco router is not connected to the internet but it is. I've tried everything, resetting, reprogramming, etc. I recently found that the windows 7 one had the software installed and the windows vista didn't. What I need is to get that software but I need to know which version to get. How do I know which version of the software goes with my computer?
View 1 Replies View RelatedSo here is the issue:
When I connect my modem directly to my computer (modem > computer) it works just fine, internet connects and everything through the direct ethernet connection.But when I connect the modem to the router and then try to connect wireless with any other computer (modem > router > wireless) nothing works. Not even when I have it connected directly from the router to the ethernet on the main computer. (Which has ALWAYS worked until now.
However, my 13" Macbook (running Lion) sometimes finds if hard to connect after I turn it on. I will have to continously turn off and on the wifi of the macbook to have it force to look at wifi networks. It will not be able to see also other wifi networks which are present in my neighbors which my windows 7 and other machines can see. After playing around with it I found that the macbook will connect to wifi only after I connect it momentarily via cable. I do this everytime I turn on my macbook.I just upgraded to a Macbook Pro running on Lion and the same thing happened. I tried the same solution of connecting first via cable but to my disappointment, would not see any wifi network including my neighbor's which again the other machines can see. So I am stuck with using cable for now.
View 5 Replies View RelatedMy e1000 was working fine until it was accidentally unplugged. Now it doesn't work. I downloaded the set up program from the site and tried to run it, but it does not recognize an internet connection when I have the modem connected to the router and the router connected to the PC. The internet works when I connect the modem directly to the PC. I have unplugged everything and restarted the PC several times and tried running the software again, but no dice.
View 4 Replies View RelatedJust got the new Linksys E1000, and follow the Cisco Connect to setup. No IP received from the service provider (which is Fibre-to-the-building, no modem is required). Goto the setup page and confirmed that the connection type is "DHCP".Once i unplug the cable from E1000 (internet port) and plug into my old wireless router, everything work nicely. The internet connection & cable itself seems fine. Switch the cable into notebook, and get the IP as well, it seems the service provider didn't lock the mac address of the devices (routuer nor PC). Cloned the mac address but nothing improved.Tried release the IP before unplug from the old router, switch off old router, and wait 10mins before connected to E1000 but still no luck.
View 2 Replies View Relatedcannot conect to the internet with my e1000 wirele
View 1 Replies View Relatedwhen i go on my iphone and click on the wirless network i just set up, it does not ask me for a password. instead i get a screen titled "IP Address" with three buttons below (dhcp, bootp, and static) with a list of blanks for ip address, subnet mask, router, dns, etc. below that.
View 1 Replies View RelatedI HAVE A CISCO E1000 WIRELESS ROUTER. I KEEP GETTING "NEED WIRELESS SECURITY SETTINGS FOR MY ROUTER NAME. CONNECTING FROM HP-XP INTERNET TO MY LAPTOP HP-VISTA. I HAVE ENTERED:
SECURITY TYPE: WPA2-PERSONAL
ENCRYPTION TYPE: TKIP
NETWORK SECURITY KEY: ???????
THIS IS WHERE I AM STUMPED AT NETWORK SECURITY KEY. I TRIED WHAT I THOUGHT IT WAS FOR MY LAPTOP HP VISTA, BUT IT'S NOT EXCEPTING. I'VE BEEN AT THIS FOR 2-WEEKS TRYING TO FIGURE OUT HOW TO GET MY VISTA TO WORK WITH MY XP. WHERE DO I GO TO GET A NETWORK SECURITY KEY???
1. I set a router admin password different from WiFi password(passphrase).
2. I run my Cisco Connect app and it asks me to change my router admin password.
If I don't change it - I can not use Cisco Connect app.
If I provide my WiFi password then it changes my router admin password.
Maybe it was done to have a "simple" solution - 1 password for everything. But maybe its a bug because router admin password should be different from WiFi password fro security reasons.
I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
View 9 Replies View RelatedI currently have an E1000 connected to my cable modem in my living room. It provides wireless access to my whole household.
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.